[root tip] [How To] Troubleshoot Calamares installer errors

linux-aarhus · 4 September 2020 17:46

Difficulty: ★★☆☆☆

Lately several topics has been created where user is installing in EFI mode and the system is booted in BIOS mode thus making Calamares boot loader installation fail.

A Calamares grub install error is - in 99% of the topics - due to having Legacy boot (CSM) enabled in the systems firmware.

Messages can be like these examples

Command ‘grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=Manjaro --force’ returned non-zero exit status 1.
Installing for x86_64-efi platform. grub-install: error: /boot/efi doesn’t look like an EFI partition.

Command ‘grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=Manjaro --force’ returned non-zero exit status 1.
Installing for x86_64-efi platform. Could not prepare Boot variable: Input/output error grub-install: error: efibootmgr failed to register the boot entry: Input/output error.

A manual rebuild of grub may yield this message

EFI variables are not suppoted on this system

Solution

Always install Manjaro the same mode as the system is booted.

Manjaro recommends to always disable Legacy boot (Compatibility mode aka CSM) in your systems firmware.

Another reason

Command ‘grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=Manjaro --force’ returned non-zero exit status 1. Installing for x86_64-efi platform. Could not prepare Boot variable: No space left on device grub-install: error: efibootmgr failed to register the boot entry: Input/output error.

The firmware storage is probably limited so it could be necessary to remove entries from the firmware. If the result of below command returns an unreasonable long list - a cleanup is needed.

$ efibootmgr           
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0009,0003,0004
Boot0000* manjaro
Boot0003* Generic Usb Device
Boot0004* CD/DVD Device
Boot0009* UEFI OS

efibootmgr

Be careful with the tool - it has a lot of options and has potential to wreck your system.

Example of such entry removal. Remember - the following command must be run as root or using sudo. To remove a bootentry Boot0020 use the hexadecimal value following Boot.

# efibootmgr -B -b 0020

To remove duplicate entries

# efibootmgr -D

Run Calamares in debug mode

To get more detalied information during the installation you can launch Calamares in debug mode from the terminal.

sudo calamares -d

Asher · 21 January 2021 22:40

File "/usr/lib/calamares/modules/bootloader/main.py", line 476, in run
    prepare_bootloader(fw_type)

  File "/usr/lib/calamares/modules/bootloader/main.py", line 448, in prepare_bootloader
    install_grub(efi_directory, fw_type)

  File "/usr/lib/calamares/modules/bootloader/main.py", line 310, in install_grub
    check_target_env_call([libcalamares.job.configuration["grubInstall"]

File "<string>", line 5, in <module>

ACER NITRO 5
I have this feedback, but it’s UEFI mode.

I’m going to try it again in debug mode.

Asher · 21 January 2021 22:57

Running debug mode.

Output:

texto preformateado con san17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
Running "env" ("mount", "-t", "ext4", "/dev/nvme0n1p1", "/tmp/calamares-root-uwxu8zy3/") 
..  Finished. Exit code: 0 
..  Target cmd: ("mount", "-t", "ext4", "/dev/nvme0n1p1", "/tmp/calamares-root-uwxu8zy3/") output:

17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:

17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
chcon: fallo al obtener el contexto de seguridad de '/boot/efi': La operación no está soportada
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-t", "vfat", "/dev/nvme0n1p4", "/tmp/calamares-root-uwxu8zy3/boot/efi") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-t", "vfat", "/dev/nvme0n1p4", "/tmp/calamares-root-uwxu8zy3/boot/efi") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
chcon: fallo al obtener el contexto de seguridad de '/dev': La operación no está soportada
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-o", "bind", "/dev", "/tmp/calamares-root-uwxu8zy3/dev") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-o", "bind", "/dev", "/tmp/calamares-root-uwxu8zy3/dev") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
chcon: fallo al obtener el contexto de seguridad de '/home': La operación no está soportada
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-t", "ext4", "/dev/nvme0n1p2", "/tmp/calamares-root-uwxu8zy3/home") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-t", "ext4", "/dev/nvme0n1p2", "/tmp/calamares-root-uwxu8zy3/home") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
chcon: fallo al obtener el contexto de seguridad de '/proc': La operación no está soportada
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-t", "proc", "proc", "/tmp/calamares-root-uwxu8zy3/proc") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-t", "proc", "proc", "/tmp/calamares-root-uwxu8zy3/proc") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
chcon: fallo al obtener el contexto de seguridad de '/run': La operación no está soportada
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-t", "tmpfs", "tmpfs", "/tmp/calamares-root-uwxu8zy3/run") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-t", "tmpfs", "tmpfs", "/tmp/calamares-root-uwxu8zy3/run") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
chcon: fallo al obtener el contexto de seguridad de '/run/udev': La operación no está soportada
17:44:54 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-o", "bind", "/run/udev", "/tmp/calamares-root-uwxu8zy3/run/udev") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-o", "bind", "/run/udev", "/tmp/calamares-root-uwxu8zy3/run/udev") output:
 
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
chcon: fallo al obtener el contexto de seguridad de '/sys': La operación no está soportada
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-t", "sysfs", "sys", "/tmp/calamares-root-uwxu8zy3/sys") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-t", "sysfs", "sys", "/tmp/calamares-root-uwxu8zy3/sys") output:
 
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
chcon: fallo al obtener el contexto de seguridad de '/sys/firmware/efi/efivars': La operación no está soportada
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-t", "efivarfs", "efivarfs", "/tmp/calamares-root-uwxu8zy3/sys/firmware/efi/efivars") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-t", "efivarfs", "efivarfs", "/tmp/calamares-root-uwxu8zy3/sys/firmware/efi/efivars") output:
 
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
17:44:55 [6]: virtual void Calamares::JobThread::run()
    Starting job "unpackfs" ( 11 / 35 ) 
17:44:55 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/unpackfs/main.py" 
17:44:55 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:44:55 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "unpackfs" = "Rellenando los sistemas de archivos." 
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-t", "squashfs", "-o", "loop", "/run/miso/bootmnt/manjaro/x86_64/rootfs.sfs", "/tmp/tmprqu5269u/rootfs") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-t", "squashfs", "-o", "loop", "/run/miso/bootmnt/manjaro/x86_64/rootfs.sfs", "/tmp/tmprqu5269u/rootfs") output:
 mount: /tmp/tmprqu5269u/rootfs: ATENCIÓN: origen protegido contra escritura; se monta como solo lectura.
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:44:55 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
17:45:48 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("mount", "-t", "squashfs", "-o", "loop", "/run/miso/bootmnt/manjaro/x86_64/desktopfs.sfs", "/tmp/tmprqu5269u/desktopfs") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mount", "-t", "squashfs", "-o", "loop", "/run/miso/bootmnt/manjaro/x86_64/desktopfs.sfs", "/tmp/tmprqu5269u/desktopfs") output:
 mount: /tmp/tmprqu5269u/desktopfs: WARNING: source write-protected, mounted read-only.
17:45:48 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("udevadm", "settle") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("udevadm", "settle") output:
 
17:45:48 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "env" ("sync") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("sync") output:
 
17:48:03 [6]: virtual void Calamares::JobThread::run()
    Starting job "networkcfg" ( 12 / 35 ) 
17:48:03 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/networkcfg/main.py" 
17:48:03 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:48:03 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "networkcfg" = "Guardando la  configuración de red." 
17:48:03 [6]: virtual void Calamares::JobThread::run()
    Starting job "Generar identificación de la maquina." ( 13 / 35 ) 
17:48:03 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemd-machine-id-setup") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemd-machine-id-setup") output:
 Initializing machine ID from random generator.
17:48:03 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "ln", "-sf", "/etc/machine-id", "/var/lib/dbus/machine-id") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("ln", "-sf", "/etc/machine-id", "/var/lib/dbus/machine-id") output:
 
17:48:03 [6]: virtual void Calamares::JobThread::run()
    Starting job "fstab" ( 14 / 35 ) 
17:48:03 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/fstab/main.py" 
17:48:03 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:48:03 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "fstab" = "Escribiendo la tabla de particiones fstab" 
[PYTHON JOB]:  "Ignoring foreign swap nvme0n1p f5cb4b57-d6d3-4c08-b595-2c4edc0c74f8" 
[PYTHON JOB]:  "Ignoring foreign swap sda 59d5b300-dbce-4fa0-9a33-2b526775f6db" 
17:48:03 [6]: virtual void Calamares::JobThread::run()
    Starting job "Configurar zona horaria a America/Bogota" ( 15 / 35 ) 
17:48:03 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "rm", "-f", "/etc/localtime") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("rm", "-f", "/etc/localtime") output:
 
17:48:03 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "ln", "-s", "/usr/share/zoneinfo/America/Bogota", "/etc/localtime") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("ln", "-s", "/usr/share/zoneinfo/America/Bogota", "/etc/localtime") output:
 
17:48:03 [6]: virtual void Calamares::JobThread::run()
    Starting job "Establecer el modelo de teclado , a una disposición us-intl" ( 16 / 35 ) 
17:48:03 [6]: virtual Calamares::JobResult SetKeyboardLayoutJob::exec()
    Executing SetKeyboardLayoutJob 
17:48:03 [6]: bool SetKeyboardLayoutJob::writeVConsoleData(const QString&, const QString&) const
    Writing vconsole data to "/tmp/calamares-root-uwxu8zy3/etc/vconsole.conf" 
17:48:03 [6]: QString SetKeyboardLayoutJob::findConvertedKeymap(const QString&) const
    Looking for converted keymap in "/tmp/calamares-root-uwxu8zy3/lib/kbd/keymaps/xkb" 
17:48:03 [6]: QString findLegacyKeymap(const QString&, const QString&, const QString&)
    Looking for legacy keymap "us" "" "intl" in QRC 
    ..  Found legacy keymap "us" with score 11 
    ..  Found legacy keymap "us-acentos" with score 12 
    ..  Written KEYMAP= "us-acentos" to vconsole.conf 0 
17:48:04 [6]: bool SetKeyboardLayoutJob::writeX11Data(const QString&) const
    Writing X11 configuration to "/tmp/calamares-root-uwxu8zy3/etc/X11/xorg.conf.d/00-keyboard.conf" 
    ..  Written XkbLayout "us" ; XkbModel "" ; XkbVariant "intl" to X.org file "/tmp/calamares-root-uwxu8zy3/etc/X11/xorg.conf.d/00-keyboard.conf" 0 
17:48:04 [6]: bool SetKeyboardLayoutJob::writeDefaultKeyboardData(const QString&) const
    Writing default keyboard data to "/tmp/calamares-root-uwxu8zy3/etc/default/keyboard" 
    ..  Written XKBMODEL "" ; XKBLAYOUT "us" ; XKBVARIANT "intl" to /etc/default/keyboard file "/tmp/calamares-root-uwxu8zy3/etc/default/keyboard" 0 
17:48:04 [6]: virtual void Calamares::JobThread::run()
    Starting job "localecfg" ( 17 / 35 ) 
17:48:04 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/localecfg/main.py" 
17:48:04 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:48:04 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "localecfg" = "Configurando especificaciones locales o regionales." 
17:48:04 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "locale-gen") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("locale-gen") output:
 Generating locales...
  en_US.UTF-8... done
  es_CO.UTF-8... done
Generation complete.
[PYTHON JOB]:  "/tmp/calamares-root-uwxu8zy3/etc/locale.gen done" 
[PYTHON JOB]:  "/tmp/calamares-root-uwxu8zy3/etc/locale.conf done" 
[PYTHON JOB]:  "/tmp/calamares-root-uwxu8zy3/etc/default done" 
17:48:07 [6]: virtual void Calamares::JobThread::run()
    Starting job "luksopenswaphookcfg" ( 18 / 35 ) 
17:48:07 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/luksopenswaphookcfg/main.py" 
17:48:07 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:48:07 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "luksopenswaphookcfg" = "Configurando la memoria de intercambio - swap - encriptada." 
17:48:07 [6]: virtual void Calamares::JobThread::run()
    Starting job "Configuring LUKS key file." ( 19 / 35 ) 
17:48:07 [6]: virtual Calamares::JobResult LuksBootKeyFileJob::exec()
    There are 0 LUKS partitions 
    ..  Nothing to do for LUKS. 
17:48:07 [6]: virtual void Calamares::JobThread::run()
    Starting job "initcpiocfg" ( 20 / 35 ) 
17:48:07 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/initcpiocfg/main.py" 
17:48:07 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:48:07 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "initcpiocfg" = "Configurando mkinitcpio - sistema de arranque básico -." 
17:48:07 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "sh", "-c", "which plymouth") 
    ..  Finished. Exit code: 1 
    ..  Target cmd: ("sh", "-c", "which plymouth") output:
 which: no plymouth in (/home/manjaro/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/var/lib/snapd/snap/bin)
[PYTHON JOB]:  "which plymouth exit code: 1" 
17:48:07 [6]: virtual void Calamares::JobThread::run()
    Starting job "Creating initramfs with mkinitcpio." ( 21 / 35 ) 
17:48:07 [6]: virtual Calamares::JobResult InitcpioJob::exec()
    Updating initramfs with kernel "linux59" 
17:48:07 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "mkinitcpio", "-p", "linux59") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mkinitcpio", "-p", "linux59") output:
 ==> Building image from preset: /etc/mkinitcpio.d/linux59.preset: 'default'
  -> -k /boot/vmlinuz-5.9-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.9-x86_64.img
==> Starting build: 5.9.16-1-MANJARO
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [keyboard]
  -> Running build hook: [keymap]
  -> Running build hook: [filesystems]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.9-x86_64.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux59.preset: 'fallback'
  -> -k /boot/vmlinuz-5.9-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.9-x86_64-fallback.img -S autodetect
==> Starting build: 5.9.16-1-MANJARO
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [keyboard]
  -> Running build hook: [keymap]
  -> Running build hook: [filesystems]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.9-x86_64-fallback.img
==> Image generation successful
17:48:26 [6]: virtual void Calamares::JobThread::run()
    Starting job "Configure <pre>sudo</pre> users." ( 22 / 35 ) 
17:48:26 [6]: virtual void Calamares::JobThread::run()
    Starting job "Preparing groups." ( 23 / 35 ) 
17:48:26 [6]: virtual void Calamares::JobThread::run()
    Starting job "Crear usuario asher" ( 24 / 35 ) 
17:48:26 [6]: virtual Calamares::JobResult CreateUserJob::exec()
    [CREATEUSER]: creating user 
17:48:26 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "useradd", "-m", "-U", "-s", "/bin/bash", "-c", "asher", "asher") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("useradd", "-m", "-U", "-s", "/bin/bash", "-c", "asher", "asher") output:
 
17:48:26 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" "/tmp/calamares-root-uwxu8zy3" "usermod" "-aG" "lp,network,power,sys,wheel" "asher" 
    ..  Finished. Exit code: 0 
    ..  Target cmd: "usermod" "-aG" "lp,network,power,sys,wheel" "asher" output:
 
17:48:26 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "chown", "-R", "asher:asher", "/home/asher") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("chown", "-R", "asher:asher", "/home/asher") output:
 
17:48:26 [6]: virtual void Calamares::JobThread::run()
    Starting job "Definir contraseña para el usuario asher." ( 25 / 35 ) 
17:48:26 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" "/tmp/calamares-root-uwxu8zy3" "usermod" "-p" <password> "asher" 
    ..  Finished. Exit code: 0 
    ..  Target cmd: "usermod" "-p" <password> "asher" output:
 
17:48:26 [6]: virtual void Calamares::JobThread::run()
    Starting job "Definir contraseña para el usuario root." ( 26 / 35 ) 
17:48:26 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" "/tmp/calamares-root-uwxu8zy3" "usermod" "-p" <password> "root" 
    ..  Finished. Exit code: 0 
    ..  Target cmd: "usermod" "-p" <password> "root" output:
 
17:48:26 [6]: virtual void Calamares::JobThread::run()
    Starting job "Hostname: uwu" ( 27 / 35 ) 
17:48:26 [6]: virtual void Calamares::JobThread::run()
    Starting job "displaymanager" ( 28 / 35 ) 
17:48:26 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/displaymanager/main.py" 
17:48:27 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:48:27 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from __doc__ "displaymanager" = "Configure display managers." 
[PYTHON JOB]:  "lightdm selected but not installed" 
[PYTHON JOB]:  "gdm selected but not installed" 
[PYTHON JOB]:  "mdm selected but not installed" 
[PYTHON JOB]:  "lxdm selected but not installed" 
[PYTHON JOB]:  "slim selected but not installed" 
[PYTHON JOB]:  "Using rootMountPoint '/tmp/calamares-root-uwxu8zy3'" 
[PYTHON JOB]:  ".. selected DE plasma" 
[PYTHON JOB]:  "Unsetting autologin." 
17:48:27 [6]: virtual void Calamares::JobThread::run()
    Starting job "mhwdcfg" ( 29 / 35 ) 
17:48:27 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/mhwdcfg/main.py" 
17:48:27 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from __doc__ "mhwdcfg" = "Configure the hardware" 
17:48:27 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "mhwd", "-a", "pci", "nonfree", "0200", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mhwd", "-a", "pci", "nonfree", "0200", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") output:
 Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/catalyst/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-340xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-418xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-430xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-435xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-440xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-340xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-418xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-430xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-435xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-440xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
Warning: No config found for device: 0000:00:14.3 (0200:8086:a370) Network controller Intel Corporation Wireless-AC 9560 [Jefferson Peak]
Warning: No config found for device: 0000:07:00.1 (0200:10ec:8168) Network controller Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
17:48:27 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "mhwd", "-a", "pci", "nonfree", "0280", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mhwd", "-a", "pci", "nonfree", "0280", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") output:
 Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/catalyst/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-340xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-418xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-430xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-435xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-440xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-340xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-418xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-430xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-435xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-440xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
Warning: No device of class 0280 found!
17:48:28 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "mhwd", "-a", "pci", "nonfree", "0300", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mhwd", "-a", "pci", "nonfree", "0300", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") output:
 Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/catalyst/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-340xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-418xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-430xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-435xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-440xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-340xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-418xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-430xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-435xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-440xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
> Using config 'video-hybrid-intel-nvidia-prime' for device: 0000:01:00.0 (0300:10de:1c8c) Display controller nVidia Corporation GP107M [GeForce GTX 1050 Ti Mobile]
> Using config 'video-hybrid-intel-nvidia-prime' for device: 0000:00:02.0 (0300:8086:3e9b) Display controller Intel Corporation UHD Graphics 630 (Mobile)
> Dependencies to install:  video-modesetting
> Installing dependency video-modesetting...
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)                                                                                                                                                                   
warning: database file for 'community' does not exist (use '-Sy' to download)                                                                                                                                                               
warning: database file for 'multilib' does not exist (use '-Sy' to download)                                                                                                                                                                
Sourcing /etc/mhwd-x86_64.conf                                                                                                                                                                                                              
Has lib32 support: true                                                                                                                                                                                                                     
Sourcing /var/lib/mhwd/db/pci/graphic_drivers/video-modesetting/MHWDCONFIG                                                                                                                                                                  
Processing classid: 0300                                                                                                                                                                                                                    
Sourcing /var/lib/mhwd/scripts/include/0300                                                                                                                                                                                                 
:: Synchronizing package databases...                                                                                                                                                                                                       
downloading mhwd.db...                                                                                                                                                                                                                      
> Successfully installed dependency video-modesetting
> Installing video-hybrid-intel-nvidia-prime...
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)                                                                                                                                                                   
warning: database file for 'community' does not exist (use '-Sy' to download)                                                                                                                                                               
warning: database file for 'multilib' does not exist (use '-Sy' to download)                                                                                                                                                                
Sourcing /etc/mhwd-x86_64.conf                                                                                                                                                                                                              
Has lib32 support: true                                                                                                                                                                                                                     
Sourcing /var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-prime/MHWDCONFIG                                                                                                                                                          
Processing classid: 0300                                                                                                                                                                                                                    
Sourcing /var/lib/mhwd/scripts/include/0300                                                                                                                                                                                                 
warning: database file for 'core' does not exist (use '-Sy' to download)                                                                                                                                                                    
warning: database file for 'extra' does not exist (use '-Sy' to download)                                                                                                                                                                   
warning: database file for 'community' does not exist (use '-Sy' to download)                                                                                                                                                               
warning: database file for 'multilib' does not exist (use '-Sy' to download)                                                                                                                                                                
warning: database file for 'core' does not exist (use '-Sy' to download)                                                                                                                                                                    
warning: database file for 'extra' does not exist (use '-Sy' to download)                                                                                                                                                                   
warning: database file for 'community' does not exist (use '-Sy' to download)                                                                                                                                                               
warning: database file for 'multilib' does not exist (use '-Sy' to download)                                                                                                                                                                
warning: database file for 'core' does not exist (use '-Sy' to download)                                                                                                                                                                    
warning: database file for 'extra' does not exist (use '-Sy' to download)                                                                                                                                                                   
warning: database file for 'community' does not exist (use '-Sy' to download)                                                                                                                                                               
warning: database file for 'multilib' does not exist (use '-Sy' to download)                                                                                                                                                                
warning: database file for 'core' does not exist (use '-Sy' to download)                                                                                                                                                                    
warning: database file for 'extra' does not exist (use '-Sy' to download)                                                                                                                                                                   
warning: database file for 'community' does not exist (use '-Sy' to download)                                                                                                                                                               
warning: database file for 'multilib' does not exist (use '-Sy' to download)                                                                                                                                                                
warning: database file for 'core' does not exist (use '-Sy' to download)                                                                                                                                                                    
warning: database file for 'extra' does not exist (use '-Sy' to download)                                                                                                                                                                   
warning: database file for 'community' does not exist (use '-Sy' to download)                                                                                                                                                               
warning: database file for 'multilib' does not exist (use '-Sy' to download)                                                                                                                                                                
resolving dependencies...                                                                                                                                                                                                                   
looking for conflicting packages...                                                                                                                                                                                                         

Packages (4) lib32-nvidia-utils-455.45.01-3  linux59-nvidia-455.45.01-6  nvidia-prime-1.0-4  nvidia-utils-455.45.01-2                                                                                                                       

Total Download Size:   174.34 MiB                                                                                                                                                                                                           
Total Installed Size:  452.97 MiB                                                                                                                                                                                                           

:: Proceed with installation? [Y/n]                                                                                                                                                                                                         
:: Retrieving packages...                                                                                                                                                                                                                   
downloading nvidia-utils-455.45.01-2-x86_64.pkg.tar.zst...                                                                                                                                                                                  
downloading nvidia-prime-1.0-4-any.pkg.tar.zst...                                                                                                                                                                                           
downloading lib32-nvidia-utils-455.45.01-3-x86_64.pkg.tar.zst...                                                                                                                                                                            
downloading linux59-nvidia-455.45.01-6-x86_64.pkg.tar.zst...                                                                                                                                                                                
checking keyring...                                                                                                                                                                                                                         
checking package integrity...                                                                                                                                                                                                               
loading package files...                                                                                                                                                                                                                    
checking for file conflicts...                                                                                                                                                                                                              
checking available disk space...                                                                                                                                                                                                            
:: Processing package changes...                                                                                                                                                                                                            
installing nvidia-utils...                                                                                                                                                                                                                  
==> If you run into trouble with CUDA not being available, run nvidia-modprobe first.
Optional dependencies for nvidia-utils
    gtk3: nvidia-settings [installed]                                                                                                                                                                                                       
    xorg-server-devel: nvidia-xconfig                                                                                                                                                                                                       
    opencl-nvidia: OpenCL support                                                                                                                                                                                                           
installing nvidia-prime...                                                                                                                                                                                                                  
installing lib32-nvidia-utils...                                                                                                                                                                                                            
Optional dependencies for lib32-nvidia-utils                                                                                                                                                                                                
    lib32-opencl-nvidia                                                                                                                                                                                                                     
installing linux59-nvidia...                                                                                                                                                                                                                
In order to use nvidia module, reboot the system.                                                                                                                                                                                           
:: Running post-transaction hooks...                                                                                                                                                                                                        
(1/6) Creating system user accounts...                                                                                                                                                                                                      
Creating group nvidia-persistenced with gid 143.                                                                                                                                                                                            
Creating user nvidia-persistenced (NVIDIA Persistence Daemon) with uid 143 and gid 143.                                                                                                                                                     
(2/6) Reloading system manager configuration...                                                                                                                                                                                             
  Skipped: Current root is not booted.                                                                                                                                                                                                      
(3/6) Arming ConditionNeedsUpdate...                                                                                                                                                                                                        
(4/6) Updating module dependencies...                                                                                                                                                                                                       
(5/6) Updating Kernel initcpios for Nvidia-DRM...                                                                                                                                                                                           
==> Building image from preset: /etc/mkinitcpio.d/linux59.preset: 'default'                                                                                                                                                                 
  -> -k /boot/vmlinuz-5.9-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.9-x86_64.img                                                                                                                                                  
==> Starting build: 5.9.16-1-MANJARO                                                                                                                                                                                                        
  -> Running build hook: [base]                                                                                                                                                                                                             
  -> Running build hook: [udev]                                                                                                                                                                                                             
  -> Running build hook: [autodetect]                                                                                                                                                                                                       
  -> Running build hook: [modconf]                                                                                                                                                                                                          
  -> Running build hook: [block]                                                                                                                                                                                                            
  -> Running build hook: [keyboard]                                                                                                                                                                                                         
  -> Running build hook: [keymap]                                                                                                                                                                                                           
  -> Running build hook: [filesystems]                                                                                                                                                                                                      
==> Generating module dependencies                                                                                                                                                                                                          
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.9-x86_64.img                                                                                                                                                                 
==> Image generation successful                                                                                                                                                                                                             
==> Building image from preset: /etc/mkinitcpio.d/linux59.preset: 'fallback'                                                                                                                                                                
  -> -k /boot/vmlinuz-5.9-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-5.9-x86_64-fallback.img -S autodetect                                                                                                                           
==> Starting build: 5.9.16-1-MANJARO                                                                                                                                                                                                        
  -> Running build hook: [base]                                                                                                                                                                                                             
  -> Running build hook: [udev]                                                                                                                                                                                                             
  -> Running build hook: [modconf]                                                                                                                                                                                                          
  -> Running build hook: [block]                                                                                                                                                                                                            
  -> Running build hook: [keyboard]                                                                                                                                                                                                         
  -> Running build hook: [keymap]                                                                                                                                                                                                           
  -> Running build hook: [filesystems]                                                                                                                                                                                                      
==> Generating module dependencies                                                                                                                                                                                                          
==> Creating gzip-compressed initcpio image: /boot/initramfs-5.9-x86_64-fallback.img                                                                                                                                                        
==> Image generation successful                                                                                                                                                                                                             
(6/6) Updating the desktop file MIME type cache...                                                                                                                                                                                          
nvidia-utils: install reason has been set to 'explicitly installed'                                                                                                                                                                         
nvidia-prime: install reason has been set to 'explicitly installed'                                                                                                                                                                         
lib32-nvidia-utils: install reason has been set to 'explicitly installed'                                                                                                                                                                   
linux59-nvidia: install reason has been set to 'explicitly installed'                                                                                                                                                                       
xorg configuration file: '/etc/X11/mhwd.d/nvidia.conf'                                                                                                                                                                                      
> Successfully installed video-hybrid-intel-nvidia-prime
17:49:14 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "mhwd", "-a", "pci", "nonfree", "0302", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mhwd", "-a", "pci", "nonfree", "0302", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") output:
 Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/catalyst/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-340xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-418xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-430xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-435xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-440xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-340xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-418xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-430xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-435xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-440xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
Warning: No device of class 0302 found!
17:49:15 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "mhwd", "-a", "pci", "nonfree", "0380", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("mhwd", "-a", "pci", "nonfree", "0380", "--pmconfig", "/opt/mhwd/pacman-mhwd.conf") output:
 Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/catalyst/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-340xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-418xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-430xx-bumblebee/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-435xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-440xx-prime/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-340xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-418xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-430xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-435xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/graphic_drivers/nvidia-440xx/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/r8168/MHWDCONFIG' is invalid!
Warning: config '/var/lib/mhwd/db/pci/network_drivers/rt3562sta/MHWDCONFIG' is invalid!
Warning: No device of class 0380 found!
17:49:15 [6]: virtual void Calamares::JobThread::run()
    Starting job "hwclock" ( 30 / 35 ) 
17:49:15 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/hwclock/main.py" 
17:49:15 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:49:15 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "hwclock" = "Configurando el reloj de la computadora." 
17:49:15 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "hwclock", "--systohc", "--utc") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("hwclock", "--systohc", "--utc") output:
 
[PYTHON JOB]:  "Hwclock set using RTC method." 
17:49:16 [6]: virtual void Calamares::JobThread::run()
    Starting job "services" ( 31 / 35 ) 
17:49:16 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/services/main.py" 
17:49:16 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:49:16 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "services" = "Configurar servicios de systemd" 
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "avahi-daemon.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "avahi-daemon.service") output:
 Created symlink /etc/systemd/system/dbus-org.freedesktop.Avahi.service -> /usr/lib/systemd/system/avahi-daemon.service.
Created symlink /etc/systemd/system/multi-user.target.wants/avahi-daemon.service -> /usr/lib/systemd/system/avahi-daemon.service.
Created symlink /etc/systemd/system/sockets.target.wants/avahi-daemon.socket -> /usr/lib/systemd/system/avahi-daemon.socket.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "bluetooth.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "bluetooth.service") output:
 Created symlink /etc/systemd/system/dbus-org.bluez.service -> /usr/lib/systemd/system/bluetooth.service.
Created symlink /etc/systemd/system/bluetooth.target.wants/bluetooth.service -> /usr/lib/systemd/system/bluetooth.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "cronie.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "cronie.service") output:
 Created symlink /etc/systemd/system/multi-user.target.wants/cronie.service -> /usr/lib/systemd/system/cronie.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "ModemManager.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "ModemManager.service") output:
 Created symlink /etc/systemd/system/dbus-org.freedesktop.ModemManager1.service -> /usr/lib/systemd/system/ModemManager.service.
Created symlink /etc/systemd/system/multi-user.target.wants/ModemManager.service -> /usr/lib/systemd/system/ModemManager.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "NetworkManager.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "NetworkManager.service") output:
 Created symlink /etc/systemd/system/multi-user.target.wants/NetworkManager.service -> /usr/lib/systemd/system/NetworkManager.service.
Created symlink /etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service -> /usr/lib/systemd/system/NetworkManager-dispatcher.service.
Created symlink /etc/systemd/system/network-online.target.wants/NetworkManager-wait-online.service -> /usr/lib/systemd/system/NetworkManager-wait-online.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "cups.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "cups.service") output:
 Created symlink /etc/systemd/system/printer.target.wants/cups.service -> /usr/lib/systemd/system/cups.service.
Created symlink /etc/systemd/system/sockets.target.wants/cups.socket -> /usr/lib/systemd/system/cups.socket.
Created symlink /etc/systemd/system/multi-user.target.wants/cups.path -> /usr/lib/systemd/system/cups.path.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "tlp.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "tlp.service") output:
 Created symlink /etc/systemd/system/multi-user.target.wants/tlp.service -> /usr/lib/systemd/system/tlp.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "haveged.service") 
    ..  Finished. Exit code: 1 
    ..  Target cmd: ("systemctl", "enable", "haveged.service") output:
 Failed to enable unit, unit haveged.service does not exist.
17:49:16 [2]: void CalamaresPython::warning(const string&)
    WARNING: [PYTHON JOB]:  "Cannot enable systemd .service haveged" 
17:49:16 [2]: void CalamaresPython::warning(const string&)
    WARNING: [PYTHON JOB]:  "systemctl enable call in chroot returned error code 1" 
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "apparmor.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "apparmor.service") output:
 Created symlink /etc/systemd/system/multi-user.target.wants/apparmor.service -> /usr/lib/systemd/system/apparmor.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "snapd.apparmor.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "snapd.apparmor.service") output:
 Created symlink /etc/systemd/system/multi-user.target.wants/snapd.apparmor.service -> /usr/lib/systemd/system/snapd.apparmor.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "snapd.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "snapd.service") output:
 Created symlink /etc/systemd/system/multi-user.target.wants/snapd.service -> /usr/lib/systemd/system/snapd.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "fstrim.timer.service") 
    ..  Finished. Exit code: 1 
    ..  Target cmd: ("systemctl", "enable", "fstrim.timer.service") output:
 Failed to enable unit, unit fstrim.timer.service does not exist.
17:49:16 [2]: void CalamaresPython::warning(const string&)
    WARNING: [PYTHON JOB]:  "Cannot enable systemd .service fstrim.timer" 
17:49:16 [2]: void CalamaresPython::warning(const string&)
    WARNING: [PYTHON JOB]:  "systemctl enable call in chroot returned error code 1" 
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "pkgfile-update.timer.service") 
    ..  Finished. Exit code: 1 
    ..  Target cmd: ("systemctl", "enable", "pkgfile-update.timer.service") output:
 Failed to enable unit, unit pkgfile-update.timer.service does not exist.
17:49:16 [2]: void CalamaresPython::warning(const string&)
    WARNING: [PYTHON JOB]:  "Cannot enable systemd .service pkgfile-update.timer" 
17:49:16 [2]: void CalamaresPython::warning(const string&)
    WARNING: [PYTHON JOB]:  "systemctl enable call in chroot returned error code 1" 
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "sddm.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "sddm.service") output:
 Created symlink /etc/systemd/system/display-manager.service -> /usr/lib/systemd/system/sddm.service.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "enable", "graphical.target") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "enable", "graphical.target") output:
 The unit files have no installation config (WantedBy=, RequiredBy=, Also=,
Alias= settings in the [Install] section, and DefaultInstance= for template
units). This means they are not meant to be enabled using systemctl.
 
Possible reasons for having this kind of units are:
* A unit may be statically enabled by being symlinked from another unit's
  .wants/ or .requires/ directory.
* A unit's purpose may be to act as a helper for some other unit which has
  a requirement dependency on it.
* A unit may be started when needed via activation (socket, path, timer,
  D-Bus, udev, scripted systemctl call, ...).
* In case of template units, the unit is meant to be enabled with some
  instance name specified.
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "systemctl", "disable", "pacman-init.service") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("systemctl", "disable", "pacman-init.service") output:
 
17:49:16 [6]: virtual void Calamares::JobThread::run()
    Starting job "grubcfg" ( 32 / 35 ) 
17:49:16 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/grubcfg/main.py" 
17:49:16 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:49:16 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "grubcfg" = "Configure GRUB - menú de arranque multisistema -" 
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "sh", "-c", "which dracut") 
    ..  Finished. Exit code: 1 
    ..  Target cmd: ("sh", "-c", "which dracut") output:
 which: no dracut in (/home/manjaro/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/var/lib/snapd/snap/bin)
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "sh", "-c", "which plymouth") 
    ..  Finished. Exit code: 1 
    ..  Target cmd: ("sh", "-c", "which plymouth") output:
 which: no plymouth in (/home/manjaro/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/var/lib/snapd/snap/bin)
17:49:16 [6]: virtual void Calamares::JobThread::run()
    Starting job "bootloader" ( 33 / 35 ) 
17:49:16 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/bootloader/main.py" 
17:49:16 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:49:16 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "bootloader" = "Instalar gestor de arranque." 
[PYTHON JOB]:  "Bootloader: grub (efi)" 
17:49:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "grub-install", "--target=x86_64-efi", "--efi-directory=/boot/efi", "--bootloader-id=Manjaro", "--force") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("grub-install", "--target=x86_64-efi", "--efi-directory=/boot/efi", "--bootloader-id=Manjaro", "--force") output:
 Installing for x86_64-efi platform.
Installation finished. No error reported.
[PYTHON JOB]:  "UEFI Fallback: True" 
[PYTHON JOB]:  "  .. installing 'bootx64.efi' fallback firmware" 
17:49:18 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "grub-mkconfig", "-o", "/boot/grub/grub.cfg") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("grub-mkconfig", "-o", "/boot/grub/grub.cfg") output:
 Generating grub configuration file ...
Found theme: /usr/share/grub/themes/manjaro/theme.txt
Found linux image: /boot/vmlinuz-5.9-x86_64
Found initrd image: /boot/intel-ucode.img /boot/amd-ucode.img /boot/initramfs-5.9-x86_64.img
Found initrd fallback image: /boot/initramfs-5.9-x86_64-fallback.img
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
Found Manjaro Linux (20.2.1) on /dev/sda2
Adding boot menu entry for UEFI Firmware Settings ...
Found memtest86+ image: /boot/memtest86+/memtest.bin
/usr/bin/grub-probe: warning: unknown device type nvme0n1.
done
17:49:26 [6]: virtual void Calamares::JobThread::run()
    Starting job "postcfg" ( 34 / 35 ) 
17:49:26 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/postcfg/main.py" 
17:49:26 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from __doc__ "postcfg" = "Misc postinstall configurations" 
17:49:26 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "pacman-key", "--init") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("pacman-key", "--init") output:
 
17:49:26 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "pacman-key", "--populate", "archlinux", "manjaro") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("pacman-key", "--populate", "archlinux", "manjaro") output:
 ==> Appending keys from archlinux.gpg...
==> Appending keys from manjaro.gpg...
==> Locally signing trusted keys in keyring...
  -> Locally signing key 7C89F4D439B2BFACF425107B62443D89B35859F8...
  -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
  -> Locally signing key 16DC688DF3EECC72323954237EC47C82A42D53A2...
  -> Locally signing key 688E8F82879D0E25CE541426150C200743ED46D8...
  -> Locally signing key 04BB537F5BC2D399BFA72F8F17C752B61B2F2E90...
  -> Locally signing key 5A97ED6B72418199F0C22B23137C934B5DCB998E...
  -> Locally signing key 76C6E477042BFE985CC220BD9C08A255442FAFF0...
  -> Locally signing key DDB867B92AA789C165EEFA799B729B06A680C281...
  -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
  -> Locally signing key 2D14560CDCE6A75BB186DB758238651DDF5E0594...
  -> Locally signing key 35B4FF23EA9477582C2A0AF12B80869C5C0102A6...
  -> Locally signing key 74C2F2CC05A0AB7D859839938934292D604F8BA2...
  -> Locally signing key 7A443CEE69B6B3777740E258084A7FC0035B1D49...
  -> Locally signing key 2C688B52E3FC0144B7484BABE3B3F44AC45EE0AA...
  -> Locally signing key 0037505D6C3F595C37F5626AFD847358FF20E35C...
  -> Locally signing key D8AFDDA07A5B6EDFA7D8CCDAD6D055F927843F1C...
  -> Locally signing key 1E7908935AAB9A00D6B47503363DFFFD59152F77...
  -> Locally signing key 39F0EC1AE50B37E5F3196F09DAD3B211663CA268...
  -> Locally signing key F66AD0FF0E57C561615A0901CEE477135C5872B0...
  -> Locally signing key 77DC01C9971AC3C39A0626F72C089F09AC97B894...
  -> Locally signing key 22C903DE964E6FE321656E318DB9F8C18DF53602...
  -> Locally signing key B4663188A692DB1E45A98EE95BD96CC4247B52CC...
  -> Locally signing key 75C1B95A4D9514A57EB2DAE71817DC63CD3B5DF5...
  -> Locally signing key E4CDFE50A2DA85D58C8A8C70CAA6A59611C7F07E...
  -> Locally signing key 3B794DE6D4320FCE594F4171279E7CF5D8D56EC8...
  -> Locally signing key 91FFE0700E80619CEB73235CA88E23E377514E00...
==> Importing owner trust values...
==> Disabling revoked keys in keyring...
  -> Disabling key 540DE7083B89314CF70EA6F0C1B1AD0DA80EBF3E...
  -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
  -> Disabling key 684148BB25B49E986A4944C55184252D824B18E8...
  -> Disabling key 5357F3B111688D88C1D88119FCF2CB179205AC90...
  -> Disabling key 50F33E2E5B0C3D900424ABE89BDCF497A4BBCC7F...
  -> Disabling key 39F880E50E49A4D11341E8F939E4F17F295AFBF4...
  -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
  -> Disabling key 40440DC037C05620984379A6761FAD69BA06C6A9...
  -> Disabling key FB871F0131FEA4FB5A9192B4C8880A6406361833...
  -> Disabling key 487EACC08557AD082088DABA1EB2638FF56C0C53...
  -> Disabling key 76B4192E902C0A52642C63C273B8ED52F1D357C1...
  -> Disabling key 40776A5221EF5AD468A4906D42A1DB15EC133BAD...
  -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
  -> Disabling key 07DFD3A0BC213FA12EDC217559B3122E2FA915EC...
  -> Disabling key 34C5D94FE7E7913E86DC427E7FB1A3800C84C0A5...
  -> Disabling key B1F2C889CB2CCB2ADA36D963097D629E437520BD...
  -> Disabling key D4DE5ABDE2A7287644EAC7E36D1A9E70E19DAA50...
  -> Disabling key 44D4A033AC140143927397D47EFD567D4C7EA887...
  -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
  -> Disabling key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
  -> Disabling key 4FCF887689C41B09506BE8D5F3E1D5C5D30DB0AD...
  -> Disabling key 5A2257D19FF7E1E0E415968CE62F853100F0D0F0...
  -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
  -> Disabling key 5E7585ADFF106BFFBBA319DC654B877A0864983E...
  -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
  -> Disabling key 5559BC1A32B8F76B3FCCD9555FA5E5544F010D48...
  -> Disabling key 4D913AECD81726D9A6C74F0ADA6426DD215B37AD...
  -> Disabling key 8840BD07FC24CB7CE394A07CCF7037A4F27FB7DA...
  -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
  -> Disabling key FAA6840E8C3FC7F89BEE0DC8AC7AB10BCB6CDD17...
  -> Disabling key 9515D8A8EAB88E49BB65EDBCE6B456CAF15447D5...
  -> Disabling key 779CD2942629B7FA04AB8F172E89012331361F01...
  -> Disabling key D921CABED130A5690EF1896E81AF739EC0711BF1...
  -> Disabling key 5696C003B0854206450C8E5BE613C09CB4440678...
  -> Disabling key 8CF934E339CAD8ABF342E822E711306E3C4F88BC...
  -> Disabling key 1A60DC44245D06FEF90623D6EEEEE2EEEE2EEEEE...
  -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
  -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
  -> Disabling key 65EEFE022108E2B708CBFCF7F9E712E59AF5F22A...
  -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
==> Updating trust database...
gpg: next trustdb check due at 2021-08-02
17:49:31 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "pacman-mirrors", "-f3") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("pacman-mirrors", "-f3") output:
 ::INFO Downloading mirrors from repo.manjaro.org
::INFO Using default mirror file
::INFO Querying mirrors - This may take some time
  1.619 Denmark        : https://mirrors.dotsrc.org/manjaro/
  2.700 Russia         : https://mirror.truenetwork.ru/manjaro/
  1.659 Russia         : http://mirror.truenetwork.ru/manjaro/
  2.684 Chile          : https://mirror.ufro.cl/manjaro/
::INFO Writing mirror list
::Denmark         : https://mirrors.dotsrc.org/manjaro/stable
::Russia          : https://mirror.truenetwork.ru/manjaro/stable
::Chile           : https://mirror.ufro.cl/manjaro/stable
::INFO Mirror list generated and saved to: /etc/pacman.d/mirrorlist
17:49:47 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "pacman", "-Syy") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("pacman", "-Syy") output:
 :: Synchronizing package databases...
downloading core.db...
downloading extra.db...
downloading community.db...
downloading multilib.db...
17:50:08 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "pacman", "-R", "--noconfirm", "amd-ucode") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("pacman", "-R", "--noconfirm", "amd-ucode") output:
 checking dependencies...

Packages (1) amd-ucode-20201218.r1803.646f159-1

Total Removed Size:  0.04 MiB

:: Do you want to remove these packages? [Y/n] 
:: Processing package changes...
removing amd-ucode...
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
17:50:09 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "killall", "-9", "gpg-agent") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("killall", "-9", "gpg-agent") output:
 
17:50:09 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "update-grub") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("update-grub") output:
 Generating grub configuration file ...
Found theme: /usr/share/grub/themes/manjaro/theme.txt
Found linux image: /boot/vmlinuz-5.9-x86_64
Found initrd image: /boot/intel-ucode.img /boot/initramfs-5.9-x86_64.img
Found initrd fallback image: /boot/initramfs-5.9-x86_64-fallback.img
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
Found Manjaro Linux (20.2.1) on /dev/sda2
Adding boot menu entry for UEFI Firmware Settings ...
Found memtest86+ image: /boot/memtest86+/memtest.bin
/usr/bin/grub-probe: warning: unknown device type nvme0n1.
done
17:50:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "grub-editenv", "-", "set", "menu_auto_hide=1", "boot_success=1") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("grub-editenv", "-", "set", "menu_auto_hide=1", "boot_success=1") output:
 
17:50:16 [6]: static CalamaresUtils::ProcessResult CalamaresUtils::System::runCommand(CalamaresUtils::System::RunLocation, const QStringList&, const QString&, const QString&, std::chrono::seconds)
    Running "chroot" ("/tmp/calamares-root-uwxu8zy3", "pacman", "-S", "libreoffice-still", "--noconfirm", "--config", "/opt/mhwd/pacman-mhwd.conf") 
    ..  Finished. Exit code: 0 
    ..  Target cmd: ("pacman", "-S", "libreoffice-still", "--noconfirm", "--config", "/opt/mhwd/pacman-mhwd.conf") output:
 resolving dependencies...
looking for conflicting packages...

Packages (28) clucene-2.3.3.4-11  libabw-0.1.3-2  libatomic_ops-7.6.10-2  libcdr-0.1.6-2  libcmis-0.5.2-6  libe-book-0.1.3-7  libepubgen-0.1.1-2  libetonyek-0.1.9-2  libexttextcat-3.4.5-2  libfreehand-0.1.2-3  liblangtag-0.6.3-2  libmspub-0.1.4-8  libmwaw-0.3.17-1  libnumbertext-1.0.6-1  libodfgen-0.1.7-2  libpagemaker-0.0.4-2  libqxp-0.0.2-4  librevenge-0.0.4-3  libstaroffice-0.0.7-1  libvisio-0.1.7-3  libwpd-0.10.3-2  libwpg-0.3.3-2  libwps-0.4.12-1  libzmf-0.0.2-8  lpsolve-5.5.2.5-4  rasqal-1:0.9.33-4  redland-1:1.0.17-8  libreoffice-still-6.4.7-7

Total Download Size:   151.71 MiB
Total Installed Size:  653.38 MiB

:: Proceed with installation? [Y/n] 
:: Retrieving packages...
downloading librevenge-0.0.4-3-x86_64.pkg.tar.zst...
downloading libwpd-0.10.3-2-x86_64.pkg.tar.zst...
downloading libwps-0.4.12-1-x86_64.pkg.tar.zst...
downloading rasqal-1:0.9.33-4-x86_64.pkg.tar.zst...
downloading redland-1:1.0.17-8-x86_64.pkg.tar.zst...
downloading lpsolve-5.5.2.5-4-x86_64.pkg.tar.zst...
downloading libwpg-0.3.3-2-x86_64.pkg.tar.zst...
downloading libvisio-0.1.7-3-x86_64.pkg.tar.zst...
downloading liblangtag-0.6.3-2-x86_64.pkg.tar.zst...
downloading libetonyek-0.1.9-2-x86_64.pkg.tar.zst...
downloading libodfgen-0.1.7-2-x86_64.pkg.tar.zst...
downloading libcdr-0.1.6-2-x86_64.pkg.tar.zst...
downloading libmspub-0.1.4-8-x86_64.pkg.tar.zst...
downloading clucene-2.3.3.4-11-x86_64.pkg.tar.zst...
downloading libpagemaker-0.0.4-2-x86_64.pkg.tar.zst...
downloading libabw-0.1.3-2-x86_64.pkg.tar.zst...
downloading libmwaw-0.3.17-1-x86_64.pkg.tar.zst...
downloading libe-book-0.1.3-7-x86_64.pkg.tar.zst...
downloading libexttextcat-3.4.5-2-x86_64.pkg.tar.zst...
downloading libcmis-0.5.2-6-x86_64.pkg.tar.zst...
downloading libzmf-0.0.2-8-x86_64.pkg.tar.zst...
downloading libatomic_ops-7.6.10-2-x86_64.pkg.tar.zst...
downloading libnumbertext-1.0.6-1-x86_64.pkg.tar.zst...
downloading libfreehand-0.1.2-3-x86_64.pkg.tar.zst...
downloading libstaroffice-0.0.7-1-x86_64.pkg.tar.zst...
downloading libepubgen-0.1.1-2-x86_64.pkg.tar.zst...
downloading libqxp-0.0.2-4-x86_64.pkg.tar.zst...
downloading libreoffice-still-6.4.7-7-x86_64.pkg.tar.zst...
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
checking available disk space...
:: Processing package changes...
installing librevenge...
installing libwpd...
installing libwps...
installing rasqal...
installing redland...
installing lpsolve...
installing libwpg...
installing libvisio...
installing liblangtag...
Optional dependencies for liblangtag
    gobject-introspection-runtime: use with liblangtag-gobject [installed]
installing libetonyek...
installing libodfgen...
installing libcdr...
installing libmspub...
installing clucene...
installing libpagemaker...
installing libabw...
installing libmwaw...
installing libe-book...
installing libexttextcat...
installing libcmis...
installing libzmf...
installing libatomic_ops...
installing libnumbertext...
installing libfreehand...
installing libstaroffice...
installing libepubgen...
installing libqxp...
installing libreoffice-still...
Optional dependencies for libreoffice-still
    java-runtime: adds java support
    java-environment: required by extension-wiki-publisher and extension-nlpsolver
    pstoedit: translates PostScript and PDF graphics into other vector formats
    libmythes: for use in thesaurus
    beanshell: interactive java -- good for prototyping/macros
    libwpg: library for importing and converting WordPerfect Graphics format [installed]
    sane: for scanner access [installed]
    unixodbc: adds ODBC database support
    gst-plugins-base-libs: for multimedia content, e.g. in Impress [installed]
    libpaper: takes care of papersize [installed]
    postgresql-libs: for postgresql-connector
    mariadb-libs: for mysql-connector
    coin-or-mp: required by the Calc solver
    gtk3: for GTK3 integration [installed]
    kio: for KF5 KDE desktop integration [installed]
:: Running post-transaction hooks...
(1/4) Arming ConditionNeedsUpdate...
(2/4) Updating icon theme caches...
(3/4) Updating the desktop file MIME type cache...
(4/4) Updating the MIME type database...
17:50:33 [6]: virtual void Calamares::JobThread::run()
    Starting job "umount" ( 35 / 35 ) 
17:50:33 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job file "/usr/lib/calamares/modules/umount/main.py" 
17:50:33 [6]: boost::python::api::object CalamaresPython::gettext_path()
    Determining gettext path from ("/home/manjaro", "/usr/bin", "/usr/share/locale") 
    ..  Found "es" in "/usr/share/locale/es" 
17:50:33 [6]: virtual Calamares::JobResult Calamares::PythonJob::exec()
    Job description from pretty_name "umount" = "Desmontar sistemas de archivos." 
17:50:34 [6]: void FinishedPage::setUpRestart()
    FinishedPage::setUpRestart(), Quit button setup= "user-unchecked" command= "systemctl reboot"

Finally works

asorel · 16 March 2021 22:06

Boost.Python error in job “bootloader”.
Command ‘grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=Manjaro --force’ returned non-zero exit status 1.
Installing for x86_64-efi platform. Could not prepare Boot variable: No space left on device grub-install: error: efibootmgr failed to register the boot entry: Input/output error.

Traceback:
File “/usr/lib/calamares/modules/bootloader/main.py”, line 476, in run
prepare_bootloader(fw_type)

File “/usr/lib/calamares/modules/bootloader/main.py”, line 448, in prepare_bootloader
install_grub(efi_directory, fw_type)

File “/usr/lib/calamares/modules/bootloader/main.py”, line 310, in install_grub
check_target_env_call([libcalamares.job.configuration[“grubInstall”],

File “”, line 6, in

I’m getting this error, but the output of efibootmgr is not “unreasonably long”; it has only three entries. Nor am I running any variant of safe boot or legacy boot; I have set my boot to UEFI only and disabled safe boot. What further troubleshooting steps should I take?

Deeblock · 23 March 2021 07:56

I am getting the same error so would love some feedback on this as well

..Target cmd: ("grub-install", "--target=x86_64-efi", "--efi-directory=/boot/efi", "--bootloader-id=Manjaro", "--force") output: Installing for x86_64-efi platform.Could not prepare Boot variable: No space left on device grub-install: error: efibootmgr failed to register the boot entry: Input/output error.

linux-aarhus · 23 March 2021 08:12

This is happening for some firmwares - it may be an issue only surfacing on certain pc/laptop vendors - maybe the efivarfs is mounted read-only?

Unified Extensible Firmware Interface - ArchWiki

asorel · 23 March 2021 18:05

While I wasn’t able to stop getting the error from appearing, strangely enough it seems that Manjaro installed without issue for me regardless. While doing a reboot to attempt a re-install, I accidentally forgot to select my live media as the boot location, and my machine continued with the default boot order–which just so happened to have my new installation at the top. For the past 4 days the installation has been functioning without issue. My motherboard is the Gigabyte Z87X-D3H, if that helps you determine whether this problem is exclusive to some vendors.

RamoFX · 26 March 2021 11:36

To it happens too, boot options not long and same boot mode on devices. I have MB MSI Tomahawk max 450

frenchiveruti · 16 April 2021 18:15

What if I can not disable the Legacy Boot from the firmware? I can’t use manjaro?