I have seen another thread Manjaro not detecting WiFi adaptor Intel Corporation Alder Lake-P PCH CNVi WiFi (rev 01) . But it seems that nothing worked.
The thread starter said Kernel 5.19 worked, but maybe it’s not available now.
Here are some information.
$ uname -a
Linux Mech-Mjr-Tera 5.15.94-1-MANJARO #1 SMP PREEMPT Tue Feb 14 19:45:58 UTC 2023 x86_64 GNU/Linux
$ inxi -Nazy
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: N/A modules: iwlwifi
bus-ID: 00:14.3 chip-ID: 8086:51f0 class-ID: 0280
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Tongfang Hongkong driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8168
class-ID: 0200
$ sudo dmesg | grep iwlwifi
[ 4.632083] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 4.786377] iwlwifi: No config found for PCI dev 51f0/0244, rev=0x370, rfid=0x10c000
[ 4.786426] iwlwifi: probe of 0000:00:14.3 failed with error -22
$ yay -S iwlwifi-next # compile error
I also tried to switch to Kernel 6.1, but it cannot load, getting stuck by a blinking cursor.nvidia-dkms doesn’t helped.
Here’s full output of inxi
$ sudo inxi --admin --verbosity=7 --filter --no-host --width
System:
Kernel: 5.15.94-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=30fa0f53-ecd7-48aa-b7f4-e72a00e6660d rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: i3 v: 4.22 info: polybar dm: LightDM v: 1.32.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: MECHREVO product: KuangshiG16 Series GM6AR0Q v: Standard
serial: <filter>
Mobo: MECHREVO model: GM6AR0Q v: Standard serial: <filter> UEFI: American
Megatrends LLC. v: N.1.06MRO06 date: 01/31/2023
Battery:
ID-1: BAT0 charge: 33.7 Wh (72.2%) condition: 46.7/46.7 Wh (100.0%)
volts: 11.3 min: 11.4 model: standard type: Li-ion serial: <filter>
status: discharging
Memory:
RAM: total: 15.36 GiB used: 3.69 GiB (24.0%)
Array-1: capacity: 64 GiB slots: 2 EC: None max-module-size: 32 GiB
note: est.
Device-1: Controller0-ChannelA-DIMM0 type: DDR4 detail: synchronous
size: 8 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits):
data: 64 total: 64 manufacturer: Crucial Technology
part-no: CT8G4SFS832A.M8FR serial: <filter>
Device-2: Controller1-ChannelA-DIMM0 type: DDR4 detail: synchronous
size: 8 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits):
data: 64 total: 64 manufacturer: Crucial Technology
part-no: CT8G4SFS832A.M8FR serial: <filter>
CPU:
Info: model: 12th Gen Intel Core i7-12650H socket: U3E1 bits: 64
type: MST AMCP arch: Alder Lake gen: core 12 level: v3 note: check
built: 2021+ process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154)
stepping: 3 microcode: 0x424
Topology: cpus: 1x cores: 10 mt: 6 tpc: 2 st: 4 threads: 16 smt: enabled
cache: L1: 864 KiB desc: d-4x32 KiB, 6x48 KiB; i-6x32 KiB, 4x64 KiB
L2: 9.5 MiB desc: 6x1.2 MiB, 1x2 MiB L3: 24 MiB desc: 1x24 MiB
Speed (MHz): avg: 732 high: 1010 min/max: 400/4600:4700:3500
base/boost: 594/4700 scaling: driver: intel_pstate governor: powersave
volts: 0.6 V ext-clock: 100 MHz cores: 1: 566 2: 646 3: 815 4: 596 5: 811
6: 625 7: 736 8: 604 9: 774 10: 646 11: 866 12: 789 13: 1010 14: 763
15: 780 16: 692 bogomips: 86048
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
bts clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16 cx8
de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
flush_l1d fma fpu fsgsbase fsrm fxsr gfni ht hwp hwp_act_window hwp_epp
hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ida intel_pt invpcid
invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b
movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq pdcm
pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed
rdtscp rep_good sdbg sep serialize sha_ni smap smep smx split_lock_detect
ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_adjust tsc_deadline_timer tsc_known_freq umip vaes vme vmx vnmi
vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave xsavec xsaveopt xsaves
xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 status: Vulnerable: eIBRS with unprivileged eBPF
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Alder Lake-P GT1 [UHD Graphics] vendor: Tongfang Hongkong
driver: i915 v: kernel arch: Gen-12.2 process: Intel 10nm built: 2021-22+
ports: active: eDP-1 empty: none bus-ID: 00:02.0 chip-ID: 8086:46a3
class-ID: 0300
Device-2: NVIDIA GN21-X4 vendor: Tongfang Hongkong driver: nvidia
v: 525.89.02 alternate: nouveau,nvidia_drm non-free: N/A
status: unknown device ID pcie: gen: 1 speed: 2.5 GT/s lanes: 8 link-max:
gen: 4 speed: 16 GT/s bus-ID: 01:00.0 chip-ID: 10de:28a0 class-ID: 0300
Device-3: Kingcome HD Webcam type: USB driver: uvcvideo bus-ID: 1-5:2
chip-ID: 2b7e:b680 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.7 compositor: Picom v: git-b700a driver:
X: loaded: modesetting,nvidia unloaded: nouveau alternate: fbdev,nv,vesa
dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1600 s-dpi: 96 s-size: 677x423mm (26.65x16.65")
s-diag: 798mm (31.43")
Monitor-1: eDP-1 model: TL160ADMP11-0 built: 2021 res: 2560x1600 hz: 240
dpi: 188 gamma: 1.2 size: 345x215mm (13.58x8.46") diag: 407mm (16")
ratio: 16:10 modes: 2560x1600
API: OpenGL Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: Intel Alder Lake PCH-P High Definition Audio
vendor: Tongfang Hongkong driver: snd_hda_intel v: kernel
alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:51c8
class-ID: 0403
Device-2: NVIDIA vendor: Tongfang Hongkong driver: snd_hda_intel v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 8 link-max: gen: 4 speed: 16 GT/s
bus-ID: 01:00.1 chip-ID: 10de:22be class-ID: 0403
Sound API: ALSA v: k5.15.94-1-MANJARO running: yes
Sound Server-1: JACK v: 1.9.22 running: no
Sound Server-2: PulseAudio v: 16.1 running: no
Sound Server-3: PipeWire v: 0.3.65 running: no
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: N/A modules: iwlwifi
bus-ID: 00:14.3 chip-ID: 8086:51f0 class-ID: 0280
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Tongfang Hongkong driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp3s0 state: down mac: <filter>
WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-10:3
chip-ID: 8087:0026 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.86 TiB used: 74.99 GiB (3.9%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Fanxiang model: S500PRO 2TB
size: 1.86 TiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: <filter> rev: SN09273 temp: 39.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 292.97 GiB size: 287.31 GiB (98.07%)
used: 40.72 GiB (14.2%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p7
maj-min: 259:7 label: N/A uuid: 30fa0f53-ecd7-48aa-b7f4-e72a00e6660d
ID-2: /boot/efi raw-size: 477 MiB size: 476 MiB (99.80%)
used: 324 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p5
maj-min: 259:5 label: N/A uuid: 7B4C-4051
ID-3: /run/media/terrasse/DATA raw-size: 944.27 GiB
size: 944.27 GiB (100.00%) used: 34.27 GiB (3.6%) fs: ntfs block-size: 4096 B
dev: /dev/nvme0n1p8 maj-min: 259:8 label: DATA uuid: CC78EE7778EE6026
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 100 MiB fs: vfat label: N/A
uuid: 8A95-7AF1
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: N/A label: N/A
uuid: N/A
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 389.81 GiB fs: ntfs label: N/A
uuid: 949EA54C9EA527A6
ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 720 MiB fs: ntfs label: N/A
uuid: F4347B29347AEE4C
ID-5: /dev/nvme0n1p6 maj-min: 259:6 size: 279.4 GiB fs: ext4 label: N/A
uuid: 3d7752ce-2283-4199-b270-8da0f930c9d3
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-5:2 info: Kingcome HD Webcam type: Video driver: uvcvideo
interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 2b7e:b680
class-ID: 0e02 serial: <filter>
Device-2: 1-10:3 info: Intel AX201 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0026
class-ID: e001
Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 43.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 323 Uptime: 7h 16m wakeups: 12230 Init: systemd v: 252
default: graphical tool: systemctl Compilers: gcc: 12.2.1 alt: 11
clang: 15.0.7 Packages: pm: pacman pkgs: 1155 libs: 310 tools: pamac,yay
pm: rpm pkgs: 0 Shell: Zsh (sudo) v: 5.9 default: Bash v: 5.1.16
running-in: alacritty inxi: 3.3.25
What does nmcli command in terminal show?
Check in BIOS/UEFI for wireless/bluetooth related settings.
Also check 6.1 LTS and 6.2 kernels.
$ nmcli
lo: connected (externally) to lo
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
inet4 127.0.0.1/8
inet6 ::1/128
route6 ::1/128 metric 256
enp3s0: unavailable
"Realtek RTL8111/8168/8411"
ethernet (r8169), B0:25:AA:55:0A:FE, hw, mtu 1500
Use "nmcli device show" to get complete information about known devices and
"nmcli connection show" to get an overview on active connection profiles.
Consult nmcli(1) and nmcli-examples(7) manual pages for complete usage details.
$ nmcli device show
GENERAL.DEVICE: lo
GENERAL.TYPE: loopback
GENERAL.HWADDR: 00:00:00:00:00:00
GENERAL.MTU: 65536
GENERAL.STATE: 100 (connected (externally))
GENERAL.CONNECTION: lo
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1
IP4.ADDRESS[1]: 127.0.0.1/8
IP4.GATEWAY: --
IP6.ADDRESS[1]: ::1/128
IP6.GATEWAY: --
IP6.ROUTE[1]: dst = ::1/128, nh = ::, mt = 256
GENERAL.DEVICE: enp3s0
GENERAL.TYPE: ethernet
GENERAL.HWADDR: B0:25:AA:55:0A:FE
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.CONNECTION: --
GENERAL.CON-PATH: --
WIRED-PROPERTIES.CARRIER: off
IP4.GATEWAY: --
IP6.GATEWAY: --
Check in BIOS/UEFI for wireless/bluetooth related settings.
Also check 6.1 LTS and 6.2 kernels.
Is Wi-fi enabled? On xfce right clicking network manager applet in tray has a setting. Maybe something similar with other DE.
You don’t have a full inxi, but if this is a laptop is there a physical switch to turn wifi on/off?
in terminal: rfkill list
It seems that there’s no suspicious settings in BIOS.
$ rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
If Nvidia is the issue, you should amend your first post with a full inxi output as 6.1 is now LTS. Maybe one of the Nvidia knowledgeable folks will chime in here. Sorry, Nvidia is not my thing.
Please read the information behind this link. It will help you to post necessary information.
[HowTo] Provide System Information
Please press the three dots …
If you give us information about your system, we can see what we’re talking about and make better suggestions.
You can do this by using inxi
sudo inxi --admin --verbosity=7 --filter --no-host --width
Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.
Copy the output from inxi (including the command) and paste it into your post.
To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.
(Wisdom lies in reading
Another thought. Are you dual booting Windows? If so, make sure that Windows is completely shutdown, hibernation, hybrid sleep and fast start are completely disabled.
I edited my post and added full inxi to it.(but with kernel 5.15, since I cannot boot from 6.1)
I do dual booting Windows, but I have disabled fast boot.
Have you tried to manually add the module?
modprobe iwlwifi
I tried, but there’s not any output.
$ sudo modprobe iwlwifi
$ sudo dmesg | grep iwlwifi
[ 4.451255] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 4.716755] iwlwifi: No config found for PCI dev 51f0/0244, rev=0x370, rfid=0x10c000
[ 4.716788] iwlwifi: probe of 0000:00:14.3 failed with error -22
j8a
March 7, 2023, 9:03pm
13
Hi @Terrasse ,
‘[SOLVED] Wireless Issues / Newbie Corner / Arch Linux Forums ’
I found a similar post in the forum, that could be helpful:Iwlwifi not working in manjaro-kde-221115-linux519 ’
Hope it helps,
Regards
Terrasse:
cannot boot from 6.1
Have you tried to add ibt=off to your kernel parameters?
Adding ibt=off to your kernel parameters is required for >=5.18
and again, make sure that Fast boot/fast start is disabled in UEFI/BIOS and Windows.
Please see:
Hello Community!
I just got my brand new laptop, it comes with an i7 12700 and Nvidia 3070 Ti, 64 GB RAM DDR4.
I installed Manjaro/KDE on it and - with my surprise - I face a lot of issues.
Kernel 6.x does not run - it hangs at boot and I need to power off, no way to reboot. I can post a photo of the messages if it is worth it, but maybe you can already tell me that my CPU is not supported by 6.0 yet? And by 5.19 neither? The only working kernel is 5.15.79 LTS.
I have terrible tearing issues…
Hello guys, there’s a good news: I tried adding ibt=off to my kernel parameter as @jrichard326 memtioned. And I can boot into Kernel 6.1 now. And I bought a USB WiFi for temporary use.
Here’s my new inxi:
System:
Kernel: 6.1.12-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
root=UUID=30fa0f53-ecd7-48aa-b7f4-e72a00e6660d rw quiet apparmor=1
security=apparmor udev.log_priority=3 ibt=off
Desktop: i3 v: 4.22 info: polybar dm: LightDM v: 1.32.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: MECHREVO product: KuangshiG16 Series GM6AR0Q v: Standard
serial: <filter>
Mobo: MECHREVO model: GM6AR0Q v: Standard serial: <filter> UEFI: American
Megatrends LLC. v: N.1.06MRO06 date: 01/31/2023
Battery:
ID-1: BAT0 charge: 46.7 Wh (100.0%) condition: 46.7/46.7 Wh (100.0%)
volts: 12.7 min: 11.4 model: standard type: Li-ion serial: <filter>
status: full
Memory:
RAM: total: 15.36 GiB used: 2.55 GiB (16.6%)
Array-1: capacity: 64 GiB slots: 2 EC: None max-module-size: 32 GiB
note: est.
Device-1: Controller0-ChannelA-DIMM0 type: DDR4 detail: synchronous
size: 8 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits):
data: 64 total: 64 manufacturer: Crucial Technology
part-no: CT8G4SFS832A.M8FR serial: <filter>
Device-2: Controller1-ChannelA-DIMM0 type: DDR4 detail: synchronous
size: 8 GiB speed: 3200 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits):
data: 64 total: 64 manufacturer: Crucial Technology
part-no: CT8G4SFS832A.M8FR serial: <filter>
CPU:
Info: model: 12th Gen Intel Core i7-12650H socket: U3E1 bits: 64
type: MST AMCP arch: Alder Lake gen: core 12 level: v3 note: check
built: 2021+ process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154)
stepping: 3 microcode: 0x424
Topology: cpus: 1x cores: 10 mt: 6 tpc: 2 st: 4 threads: 16 smt: enabled
cache: L1: 864 KiB desc: d-4x32 KiB, 6x48 KiB; i-6x32 KiB, 4x64 KiB
L2: 9.5 MiB desc: 6x1.2 MiB, 1x2 MiB L3: 24 MiB desc: 1x24 MiB
Speed (MHz): avg: 2578 high: 2700 min/max: 400/4600:4700:3500
base/boost: 4059/4700 scaling: driver: intel_pstate governor: powersave
volts: 1.3 V ext-clock: 100 MHz cores: 1: 2700 2: 2700 3: 761 4: 2700
5: 2700 6: 2700 7: 2700 8: 2700 9: 2700 10: 2700 11: 2700 12: 2700 13: 2700
14: 2700 15: 2700 16: 2700 bogomips: 86048
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
bts clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16 cx8
de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp hwp_act_window
hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ida intel_pt
invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe
movdir64b movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid
pclmulqdq pdcm pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdpid
rdrand rdseed rdtscp rep_good sdbg sep serialize sha_ni smap smep smx
split_lock_detect ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm
tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq umip vaes
vme vmx vnmi vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
filling, PBRSB-eIBRS: SW sequence
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Alder Lake-P GT1 [UHD Graphics] vendor: Tongfang Hongkong
driver: i915 v: kernel arch: Gen-12.2 process: Intel 10nm built: 2021-22+
ports: active: eDP-1 empty: none bus-ID: 00:02.0 chip-ID: 8086:46a3
class-ID: 0300
Device-2: NVIDIA GN21-X4 vendor: Tongfang Hongkong driver: nvidia
v: 525.89.02 alternate: nouveau,nvidia_drm non-free: N/A
status: unknown device ID pcie: gen: 4 speed: 16 GT/s lanes: 8
bus-ID: 01:00.0 chip-ID: 10de:28a0 class-ID: 0300
Device-3: Kingcome HD Webcam type: USB driver: uvcvideo bus-ID: 1-5:4
chip-ID: 2b7e:b680 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.7 compositor: Picom v: git-b700a driver:
X: loaded: modesetting,nvidia unloaded: nouveau alternate: fbdev,nv,vesa
dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1600 s-dpi: 96 s-size: 677x423mm (26.65x16.65")
s-diag: 798mm (31.43")
Monitor-1: eDP-1 model: TL160ADMP11-0 built: 2021 res: 2560x1600 hz: 240
dpi: 188 gamma: 1.2 size: 345x215mm (13.58x8.46") diag: 407mm (16")
ratio: 16:10 modes: 2560x1600
API: OpenGL Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: Intel Alder Lake PCH-P High Definition Audio
vendor: Tongfang Hongkong driver: snd_hda_intel v: kernel
alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:51c8
class-ID: 0403
Device-2: NVIDIA vendor: Tongfang Hongkong driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 8 bus-ID: 01:00.1 chip-ID: 10de:22be
class-ID: 0403
Sound API: ALSA v: k6.1.12-1-MANJARO running: yes
Sound Server-1: JACK v: 1.9.22 running: no
Sound Server-2: PulseAudio v: 16.1 running: no
Sound Server-3: PipeWire v: 0.3.65 running: no
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: N/A modules: iwlwifi
bus-ID: 00:14.3 chip-ID: 8086:51f0 class-ID: 0280
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Tongfang Hongkong driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp3s0 state: down mac: <filter>
Device-3: Realtek 802.11ac NIC type: USB driver: rtl8821cu bus-ID: 1-3:7
chip-ID: 0bda:c811 class-ID: 0000 serial: <filter>
IF: wlp0s20f0u3 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-10:5
chip-ID: 8087:0026 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.86 TiB used: 46.56 GiB (2.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Fanxiang model: S500PRO 2TB
size: 1.86 TiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: <filter> rev: SN09273 temp: 39.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 292.97 GiB size: 287.31 GiB (98.07%)
used: 46.56 GiB (16.2%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p7
maj-min: 259:7 label: N/A uuid: 30fa0f53-ecd7-48aa-b7f4-e72a00e6660d
ID-2: /boot/efi raw-size: 477 MiB size: 476 MiB (99.80%)
used: 324 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p5
maj-min: 259:5 label: N/A uuid: 7B4C-4051
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 100 MiB fs: vfat label: N/A
uuid: 8A95-7AF1
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: N/A label: N/A
uuid: N/A
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 389.81 GiB fs: ntfs label: N/A
uuid: 949EA54C9EA527A6
ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 720 MiB fs: ntfs label: N/A
uuid: F4347B29347AEE4C
ID-5: /dev/nvme0n1p6 maj-min: 259:6 size: 279.4 GiB fs: ext4 label: N/A
uuid: 3d7752ce-2283-4199-b270-8da0f930c9d3
ID-6: /dev/nvme0n1p8 maj-min: 259:8 size: 944.27 GiB fs: ntfs label: DATA
uuid: CC78EE7778EE6026
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-1:2 info: Logitech Gaming Mouse G302 type: Mouse,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 300mA
chip-ID: 046d:c07f class-ID: 0300 serial: <filter>
Device-2: 1-3:7 info: Realtek 802.11ac NIC type: Network driver: rtl8821cu
interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:c811
class-ID: 0000 serial: <filter>
Device-3: 1-5:4 info: Kingcome HD Webcam type: Video driver: uvcvideo
interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 2b7e:b680
class-ID: 0e02 serial: <filter>
Device-4: 1-10:5 info: Intel AX201 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0026
class-ID: e001
Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 51.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 280 Uptime: 21m wakeups: 1715 Init: systemd v: 252
default: graphical tool: systemctl Compilers: gcc: 12.2.1 alt: 11
clang: 15.0.7 Packages: pm: pacman pkgs: 1157 libs: 310 tools: pamac,yay
pm: rpm pkgs: 0 Shell: Zsh (sudo) v: 5.9 default: Bash v: 5.1.16
running-in: alacritty inxi: 3.3.25
1 Like
I tried most of methods mentioned in that thread, but nothing worked. At last the thread starter edit the kernel to solve the issue, which may be too difficult for me.
And this thread does not help either…
By the way, I checked again to make sure the fast boot is disabled. And hibernation, hybrid sleep is also disabled. I also booted into Windows to shutdown the WiFi and the shutdown Windows completely. Which doesn’t work either.
j8a
March 8, 2023, 11:03pm
17
Hi @Terrasse ,Wifi not working on LTS but does on Linux - #9 by leigh - Basic Help & Support - ArchLabs Linux ’
Regards,
No, they can’t. 5.19 is EOL and hasn’t been in the repos for months.
1 Like
Substitute IWL_CFG_160 to IWL_CFG_ANY in Kernel 6.2.2 source Line 1094 of /drivers/net/wireless/intel/iwlwifi/pcie/drv.c and recompile kernel (or iwiwifi module) can make the card work (kernel 5.19 code of this part is basically the same as 6.2). The issus persists into wireless-next and iwlwifi-next branches so it is likely not going to be fixed in the near future.
1 Like
Hi @JerryXiao ,
I’d post what I did in case someone meets similar situation:
wget https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-6.2.2.tar.xz
tar -xvf linux-6.2.2.tar.xz
cd linux-6.2.2
vim drivers/net/wireless/intel/iwlwifi/pcie/drv.c #edit the line 1094 as @JerryXiao said
make mrproper
zcat /proc/config.gz > .config
make modules_prepare
make M=drivers/net/wireless/intel/iwlwifi
zstd drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
cp /lib/modules/6.2.0-1-MANJARO/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko.zst ~/iwlwifi.ko.bak
sudo cp drivers/net/wireless/intel/iwlwifi/iwlwifi.ko.zst /lib/modules/6.2.0-1-MANJARO/kernel/drivers/net/wireless/intel/iwlwifi/
And then every time after reboot:
sudo modprobe iwlwifi --force-vermagic
I followed guidance from Arch Wiki - Compile Kernel Module , which may be helpful.
)