Creating a Wiki/FAQ

[cscs]

Do we have a number of tested examples?

[turux]

An Artikel in Manjaro-ARM-Wiki about

Manjaro ARM Flasher

would be nice.

A

Howto switch branches

too.

[Strit]

The Flasher tool is a simple GUI tool. Should be pretty self explanitory.

And switching branches is same approach as x64.

[turux]

Some people like to read before they install an application.
And a lot of people do not even know which App they need.
In my opinion a wiki has to give this information.

[Strit]

Sure. Good point.
I assume there’s a wiki entry for using Etcher as well?

[Mangled]

Creating a Wiki/FAQ

Is it possible to add a section for setting up TV/monitors with different aspect ratios or custom resolutions that do not appear in the display manager? Also ways to configure audio. Run through HDMI or setting it up to output from analogue.

All this was possible with raspi-config. Can we get documentation done for manjaro on Arm?

[cscs]

why are you repeating the same question?
especially after I asked you on in response

[Mangled]

Sorry I thought it has gone unnoticed. I’m inquiring about it because I myself do not know the answer. Would be nice to have some documentation/something to reference to in setting up arm boxes.

[spikerguy]

@Mangled

Would be nice to have some documentation/something to reference to in setting up arm boxes.

Which arm boxes?
There is one which is for Amlogic boxes which will soon be transferred to wiki.

[How To] Install run Manjaro ARM on Amlogic TV Boxes with S922X - S905X3 SOC

[How To] Install run Manjaro ARM on Amlogic TV Boxes with S922X - S905X3 SOC This tutorial is aimed for users who own an Amlogic SOC based TV Box and would like to try running Manjaro ARM OS over sd card. How to run over sd card: Download the Manjaro-ARM-kde-plasma-vim3-21.02 file from the link. Verify that the download completed successfully. Install Etcher (sudo pacman -S etcher if on Manjaro) and burn the to an SD card (8 GB or larger). Open extlinux.conf from Boot partitons extlinux dir…

[Mangled]

I started a new thread on audio outputs for pi4. Would be nice to see this on the wiki.
Thank you. So far all the info on there is very helpful.

Pi4 Audio Output

I not sure what you are asking but if you want sound from the a/v jack on the board it has been a long time since I messed with it. You have to change in /boot/cmdline.txt “snd-bcm2835.enable_compat_alsa=0” to “snd-bcm2835.enable_compat_alsa=1” Then in the /boot/config.txt disable the line “hdmi_drive=2”. There may be something else you have to do but I do not remember. You will have to choose the output in PulseAudio Volume Control.

[anon80447176]

Having been on the forums for a while now, it appears as though the topic of running Widevine on aarch64 comes up… a lot. It might pay to add a section on this, and the current workaround via the chromium-docker package, to the Manjaro ARM Wiki. I would do it, but I don’t have permissions.

[anon80447176]

Also, shouldn’t we have a link to the Manjaro ARM Wiki somewhere on the ARM Forum page; in one of the rectangle things at the top?