Hello everyone,
I’d like some help troubleshooting a weird issue I’m having.
The problem
At startup, after grup menu, when using kernel 5.10 or 5.11, booting stops after gdm service starts, and a grey screen with a blinking horizontal cursor shows up (as can happen when gdm is about to start) but stops there.
This does not happen using LTS kernel 5.4, which is a good thing.
Also, when the bug occurs, I can still open a tty.
What happened just before
I updated my system via the command line using sudo pacman -Syu. Rebooted for unrelated reasons, then the bug happened.
System info
System:
Kernel: 5.11.16-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.11-x86_64
root=UUID=8475a443-cbc4-45d6-8e0e-4eab94b2ffd5 rw apparmor=1
security=apparmor udev.log_priority=3
Console: tty 2 DM: GDM 40.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: GL502VSK v: 1.0 serial: <filter>
Mobo: ASUSTeK model: GL502VSK v: 1.0 serial: <filter>
UEFI: American Megatrends v: GL502VSK.309 date: 05/03/2019
Battery:
ID-1: BAT0 charge: 43.7 Wh (97.3%) condition: 44.9/62.6 Wh (71.7%)
volts: 15.2 min: 15.2 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
status: Not charging cycles: 206
Memory:
RAM: total: 15.47 GiB used: 617.1 MiB (3.9%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Quad Core model: Intel Core i7-7700HQ bits: 64 type: MT MCP
arch: Kaby Lake family: 6 model-id: 9E (158) stepping: 9 microcode: DE
cache: L2: 6 MiB bogomips: 44817
Speed: 1130 MHz min/max: 800/3800 MHz Core speeds (MHz): 1: 1130 2: 1200
3: 1200 4: 1200 5: 1188 6: 1200 7: 1201 8: 1201
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GP104BM [GeForce GTX 1070 Mobile] vendor: ASUSTeK
driver: N/A alternate: nouveau, nvidia_drm, nvidia bus-ID: 01:00.0
chip-ID: 10de:1be1 class-ID: 0300
Device-2: IMC Networks USB2.0 HD UVC WebCam type: USB driver: uvcvideo
bus-ID: 1-4:3 chip-ID: 13d3:5666 class-ID: 0e02 serial: <filter>
Display: server: X.org 1.20.11 driver: loaded: nvidia tty: 240x67
Message: Advanced graphics data unavailable in console. Try -G --display
Audio:
Device-1: Intel CM238 HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a171 class-ID: 0403
Device-2: NVIDIA GP104 High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 01:00.1 chip-ID: 10de:10f0
class-ID: 0403
Device-3: Plantronics HD1 type: USB driver: plantronics,snd-usb-audio,usbhid
bus-ID: 1-1:2 chip-ID: 047f:c03b class-ID: 0300
Sound Server-1: ALSA v: k5.11.16-2-MANJARO running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: no
Sound Server-4: PipeWire v: 0.3.26 running: no
Network:
Device-1: Intel Wireless 8260 driver: iwlwifi v: kernel port: e000
bus-ID: 03:00.0 chip-ID: 8086:24f3 class-ID: 0280
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel port: d000 bus-ID: 04:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp4s0 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
bus-ID: 1-9:6 chip-ID: 8087:0a2b class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 8.64 TiB used: 2.44 TiB (28.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WDS500G2B0B-00YS70 size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s rotation: SSD serial: <filter> rev: 00WD
scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: HGST (Hitachi) model: HTS721010A9E630
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
rotation: 7200 rpm serial: <filter> rev: A3V0 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 type: USB model: External USB 3.0
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B serial: <filter>
rev: 0104 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 150 GiB size: 146.64 GiB (97.76%) used: 52.76 GiB (36.0%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
uuid: 8475a443-cbc4-45d6-8e0e-4eab94b2ffd5
ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%)
used: 26.9 MiB (2.6%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: N/A
uuid: 73DF-165F
ID-3: /home raw-size: 931.51 GiB size: 915.89 GiB (98.32%)
used: 272.06 GiB (29.7%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: N/A
uuid: 660fad62-d62e-44fb-9760-0a86bb9a28f3
ID-4: /media/Externe 3.5 8To raw-size: 7.28 TiB size: 7.22 TiB (99.20%)
used: 2.12 TiB (29.4%) fs: ext4 dev: /dev/sdc1 maj-min: 8:33
label: Externe 3.5 8To uuid: bab7a0e0-c509-4178-9dbb-77d06807544e
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda3 maj-min: 8:3 size: 258.59 GiB fs: ntfs label: N/A
uuid: A4AC6D1DAC6CEAEE
ID-2: /dev/sda4 maj-min: 8:4 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-1:2 info: Plantronics HD1 type: Audio,HID
driver: plantronics,snd-usb-audio,usbhid interfaces: 4 rev: 2.0
speed: 12 Mb/s power: 100mA chip-ID: 047f:c03b class-ID: 0300
Device-2: 1-4:3 info: IMC Networks USB2.0 HD UVC WebCam type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 13d3:5666 class-ID: 0e02 serial: <filter>
Device-3: 1-5:4 info: Microdia Backlit Gaming Keyboard type: Keyboard,Mouse
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 400mA chip-ID: 0c45:652f class-ID: 0301
Device-4: 1-8:5 info: ASUSTek ROG MacroKey type: Keyboard,Mouse
driver: asus,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 100mA
chip-ID: 0b05:1837 class-ID: 0301
Device-5: 1-9:6 info: Intel Bluetooth wireless interface type: Bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
chip-ID: 8087:0a2b class-ID: e001
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Device-1: 2-6:2 info: Unknown External USB 3.0 type: Mass Storage
driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA
chip-ID: 0080:0578 class-ID: 0806 serial: <filter>
Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 57.5 C mobo: N/A
Fan Speeds (RPM): cpu: 2600
Info:
Processes: 223 Uptime: N/A wakeups: 1 Init: systemd v: 247 tool: systemctl
Compilers: gcc: 10.2.0 clang: 11.1.0 Packages: 1813 pacman: 1788 lib: 480
flatpak: 16 snap: 9 Shell: Zsh (login) v: 5.8 running-in: tty 2 inxi: 3.3.04
xrandr output
None, it errors out with no display.
Welcome back to the forum! 
) after I uninstalled 5.10 to reinstall it just to be sure.
or 
if you agree)
