Just upgraded all packages today, now the sound doesn’t play in any application, and the request “hangs” and times out when I try and play sound, causing various apps or containers to freeze.
I booted back into a 6.1 kernel, but this had no effect on the sound server issue.
Soundcard details:
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Here’s inxi output requested by Midarthos
System:
Kernel: 6.1.131-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
root=UUID=429febf3-f675-4d55-bd65-7a455f99ce41 rw quiet apparmor=1
security=apparmor resume=UUID=5a52bfa4-0541-45e6-b1ea-ada17658268d
udev.log_priority=3
Desktop: Cinnamon v: 6.4.8 tk: GTK v: 3.24.49 wm: Muffin v: 6.4.1 tools:
avail: cinnamon-screensaver vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro
base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 3367AJ5 v: ThinkPad X131e
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 3367AJ5 serial: <superuser required>
part-nu: LENOVO_MT_3367 uuid: <superuser required> UEFI-[Legacy]: LENOVO
v: G8ET66WW (2.05 ) date: 09/10/2012
Battery:
ID-1: BAT1 charge: 34.9 Wh (100.0%) condition: 34.9/57.7 Wh (60.4%)
volts: 12.5 min: 11.1 model: LGC 45N1063 type: Li-ion serial: <filter>
status: full
Memory:
System RAM: total: 8 GiB available: 7.49 GiB used: 4.31 GiB (57.6%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 16 GiB slots: 2 modules: 2 EC: None
max-module-size: 8 GiB note: est.
Device-1: ChannelA-DIMM0 type: DDR3 detail: synchronous size: 4 GiB
speed: 1333 MT/s volts: N/A width (bits): data: 64 total: 64
manufacturer: Hynix/Hyundai part-no: HMT351S6EFR8C-PB serial: <filter>
Device-2: ChannelB-DIMM0 type: DDR3 detail: synchronous size: 4 GiB
speed: 1333 MT/s volts: N/A width (bits): data: 64 total: 64
manufacturer: Hynix/Hyundai part-no: HMT351S6EFR8C-PB serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Celeron 887 bits: 64 type: MCP arch: Sandy Bridge
level: v2 built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42)
stepping: 7 microcode: 0x2F
Topology: cpus: 1x dies: 1 clusters: 2 cores: 2 smt: <unsupported> cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 2 MiB desc: 1x2 MiB
Speed (MHz): avg: 1497 min/max: 800/1500 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 1497 2: 1497 bogomips: 5989
Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb est flush_l1d
fpu fxsr ht ibpb ibrs lahf_lm lm mca mce md_clear mmx monitor msr mtrr
nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pebs pge pln pni
popcnt pse pse36 pti pts rdtscp rep_good sep ssbd sse sse2 sse4_1 sse4_2
ssse3 stibp syscall tm tm2 tsc tsc_deadline_timer vme x2apic xsave
xsaveopt xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW;
STIBP: disabled; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: Lenovo driver: i915 v: kernel arch: Gen-6 code: Sandybridge
process: Intel 32nm built: 2011 ports: active: LVDS-1,VGA-1
empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:0106 class-ID: 0300
Device-2: Chicony Integrated Camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-4:3 chip-ID: 04f2:b2fe
class-ID: 0e02
Display: x11 server: X.Org v: 21.1.16 with: Xwayland v: 24.1.6 driver: X:
loaded: modesetting alternate: fbdev,vesa dri: crocus gpu: i915
display-ID: :0 screens: 1
Screen-1: 0 s-res: 3286x1080 s-dpi: 96 s-size: 869x286mm (34.21x11.26")
s-diag: 915mm (36.02")
Monitor-1: LVDS-1 pos: primary,bottom-r model: ChiMei InnoLux 0x1118
built: 2011 res: mode: 1366x768 hz: 60 scale: 100% (1) dpi: 136 gamma: 1.2
chroma: red: x: 0.588 y: 0.341 green: x: 0.322 y: 0.561 blue: x: 0.153
y: 0.133 white: x: 0.314 y: 0.329 size: 256x144mm (10.08x5.67")
diag: 294mm (11.6") ratio: 16:9 modes: 1366x768
Monitor-2: VGA-1 pos: top-left model: LCDTV14 serial: <filter> built: 2008
res: mode: 1920x1080 hz: 60 scale: 100% (1) dpi: 30 gamma: 1.2 chroma: red:
x: 0.627 y: 0.341 green: x: 0.278 y: 0.596 blue: x: 0.153 y: 0.071 white:
x: 0.298 y: 0.298 size: 1600x900mm (62.99x35.43") diag: 1836mm (72.3")
ratio: 16:9 modes: 1920x1080, 1600x1200, 1280x1024, 1360x768, 1024x768,
800x600, 640x480, 720x400
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Info: Tools: x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20
class-ID: 0403
API: ALSA v: k6.1.131-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.4.1 status: active with: wireplumber
status: active tools: pw-cat,pw-cli,wpctl
Server-3: PulseAudio v: 17.0-43-g3e2bb status: active
with: pulseaudio-alsa type: plugin tools: pacat,pactl,pavucontrol
Network:
Device-1: Broadcom BCM43228 802.11a/b/g/n driver: wl v: kernel modules: bcma
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:4359
class-ID: 0280
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 3000 bus-ID: 09:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp9s0 state: down mac: <filter>
Info: services: mld, NetworkManager, ntpd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Broadcom BCM20702A0 driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 2-1.5:3 chip-ID: 0a5c:21f3
class-ID: fe01 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 119.24 GiB used: 86.15 GiB (72.2%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: LITE-ON IT model: LCT-128M3S
size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: VQN6 scheme: MBR
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 111.41 GiB size: 109.1 GiB (97.93%)
used: 86.15 GiB (79.0%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A
uuid: 429febf3-f675-4d55-bd65-7a455f99ce41
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: partition size: 7.83 GiB used: 3.2 MiB (0.0%)
priority: -2 dev: /dev/sda2 maj-min: 8:2 label: swap
uuid: 5a52bfa4-0541-45e6-b1ea-ada17658268d
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: full speed or root hub ports: 3 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:0024
class-ID: 0900
Device-1: 1-1.2:3 info: SYSGRATION type: keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
chip-ID: 05b8:3149 class-ID: 0300
Hub-3: 2-0:1 info: full speed or root hub ports: 3 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:0024
class-ID: 0900
Device-1: 2-1.5:3 info: Broadcom BCM20702A0 type: Bluetooth driver: btusb
interfaces: 4 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
chip-ID: 0a5c:21f3 class-ID: fe01 serial: <filter>
Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-2:2 info: USB OPTICAL MOUSE type: mouse
driver: hid-generic,usbhid interfaces: 1 rev: 1.1
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
chip-ID: 0000:3825 class-ID: 0301
Device-2: 3-4:3 info: Chicony Integrated Camera type: video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 256mA chip-ID: 04f2:b2fe class-ID: 0e02
Hub-6: 4-0:1 info: super-speed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 62.0 C mobo: 0.0 C
Fan Speeds (rpm): cpu: 512 fan-2: 512
Repos:
Packages: 1493 pm: pacman pkgs: 1483 libs: 456 tools: pamac,yay pm: flatpak
pkgs: 0 pm: snap pkgs: 10
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://irltoolkit.mm.fcix.net/manjaro/stable/$repo/$arch
2: https://mirrors.ocf.berkeley.edu/manjaro/stable/$repo/$arch
3: https://repo.ialab.dsu.edu/manjaro/stable/$repo/$arch
4: https://nocix.mm.fcix.net/manjaro/stable/$repo/$arch
5: http://ftp.tsukuba.wide.ad.jp/Linux/manjaro/stable/$repo/$arch
6: https://manjaro.mirrors.lavatech.top/stable/$repo/$arch
7: https://manjaro.ynh.ovh/stable/$repo/$arch
8: https://manjaro.c3sl.ufpr.br/stable/$repo/$arch
Processes:
CPU top: 5 of 255
1: cpu: 200% command: ps pid: 5987 mem: 3.58 MiB (0.0%)
2: cpu: 38.4% command: pipewire pid: 1738 mem: 12.9 MiB (0.1%)
3: cpu: 28.8% command: firefox pid: 5537 mem: 476.9 MiB (6.2%)
4: cpu: 11.9% command: firefox pid: 5712 mem: 236.7 MiB (3.0%)
5: cpu: 10.5% command: gnome-terminal-server pid: 5962
mem: 53.7 MiB (0.7%)
Memory top: 5 of 255
1: mem: 545.4 MiB (7.1%) command: Discord pid: 3583 cpu: 3.0%
2: mem: 476.9 MiB (6.2%) command: firefox pid: 5537 cpu: 28.8%
3: mem: 446.6 MiB (5.8%) command: brave pid: 1917 cpu: 0.5%
4: mem: 420.7 MiB (5.4%) command: pamac-manager pid: 4043 cpu: 0.1%
5: mem: 236.7 MiB (3.0%) command: firefox pid: 5712 cpu: 11.9%
Info:
Processes: 255 Power: uptime: 12h 57m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 1 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 2.98 GiB services: csd-power,upowerd
Init: systemd v: 257 default: graphical tool: systemctl
Compilers: clang: 19.1.7 gcc: 14.2.1 Shell: Bash v: 5.2.37
running-in: gnome-terminal inxi: 3.3.37
Pactl output requested by nikgnomic:
Card #0
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf1710000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 32833, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 39333, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
Tip for legibility: