No shutdown or reboots possible: watchdog & blackscreen

New install of Manjaro here: everything works fine except that if I want to reboot or shut down my PC, I can’t. So I have to hard reboot it or shut it down by switching the power off. :neutral_face:

I had the well known watchdog0: watchdog did not stop! error, with an incrementing session time at the begining of it.

I studied this problem since several days, it appears that I succeed to solve the watchdog problem but I’m not sure:

  • I followed this and that , I don’t have the error anymore, I don’t see anything suspicious with lsmod (see below), and cat /proc/sys/kernel/nmi_watchdog & cat /proc/sys/kernel/watchdog both return 0.
  • I’m still stuck at the same moment: I still have the same screen, with what seems to be an unresponsive console (black screen with a blinking underscore). It looked like this, a bug in Plasma 6.1.5, I tried the work around (“System settings > Session > Desktop Session, [select] ‘Start with an empty session’ and reboot”), unsuccessful.

And now I don’t know what to do :confused: I can’t find any ressource and I doubt about the source of the issue

> ❯ lsmod 
> Module                  Size  Used by 
> rfcomm                110592  4 
> snd_seq_dummy          16384  0 
> snd_seq_midi           24576  0 
> snd_hrtimer            16384  1 
> snd_seq_midi_event     16384  1 snd_seq_midi 
> snd_seq               135168  9 snd_seq_midi,snd_seq_midi_event,snd_seq_dummy 
> algif_hash             16384  1 
> algif_skcipher         12288  1 
> af_alg                 32768  6 algif_hash,algif_skcipher 
> qrtr                   57344  2 
> bnep                   36864  2 
> vfat                   28672  1 
> fat                   114688  1 vfat 
> ucsi_acpi              16384  0 
> typec_ucsi             90112  1 ucsi_acpi 
> roles                  16384  1 typec_ucsi 
> typec                 135168  1 typec_ucsi 
> snd_hda_codec_alc662    20480  1 
> snd_hda_codec_realtek_lib    65536  1 snd_hda_codec_alc662 
> mt7925e                28672  0 
> snd_hda_codec_generic   114688  2 snd_hda_codec_alc662,snd_hda_codec_realtek_lib 
> snd_hda_codec_atihdmi    20480  2 
> uvcvideo              188416  0 
> mt7925_common         147456  1 mt7925e 
> snd_hda_codec_hdmi     61440  1 snd_hda_codec_atihdmi 
> videobuf2_vmalloc      20480  1 uvcvideo 
> snd_usb_audio         626688  2 
> mt792x_lib             77824  2 mt7925e,mt7925_common 
> uvc                    12288  1 uvcvideo 
> videobuf2_memops       16384  1 videobuf2_vmalloc 
> snd_hda_intel          73728  3 
> mt76_connac_lib       106496  3 mt792x_lib,mt7925e,mt7925_common 
> snd_usbmidi_lib        53248  1 snd_usb_audio 
> videobuf2_v4l2         45056  1 uvcvideo 
> amd_atl                61440  1 
> btusb                  86016  0 
> snd_hda_codec         225280  6 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_alc662,snd_hda_codec_realtek_lib,snd_hda_codec_atihdmi 
> videobuf2_common       98304  4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops 
> snd_ump                40960  1 snd_usb_audio 
> mt76                  167936  4 mt792x_lib,mt7925e,mt76_connac_lib,mt7925_common 
> btmtk                  40960  1 btusb 
> intel_rapl_msr         24576  0 
> btrtl                  32768  1 btusb 
> intel_rapl_common      53248  1 intel_rapl_msr 
> snd_rawmidi            53248  3 snd_seq_midi,snd_usbmidi_lib,snd_ump 
> btbcm                  24576  1 btusb 
> snd_hda_core          151552  7 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_alc662,snd_hda_codec,snd_hda_codec_realtek_lib,snd_hda_codec_atihdmi 
> videodev              430080  2 videobuf2_v4l2,uvcvideo 
> spd5118                16384  0 
> btintel                77824  1 btusb 
> snd_seq_device         16384  4 snd_seq,snd_seq_midi,snd_ump,snd_rawmidi 
> snd_intel_dspcfg       49152  1 snd_hda_intel 
> mac80211             1814528  4 mt792x_lib,mt76,mt76_connac_lib,mt7925_common 
> mc                     98304  5 videodev,snd_usb_audio,videobuf2_v4l2,uvcvideo,videobuf2_common 
> r8169                 163840  0 
> eeepc_wmi              12288  0 
> snd_intel_sdw_acpi     16384  1 snd_intel_dspcfg 
> bluetooth            1212416  34 btrtl,btmtk,btintel,btbcm,bnep,btusb,rfcomm 
> joydev                 24576  0 
> mousedev               28672  0 
> aesni_intel           102400  1 
> realtek                65536  1 
> snd_hwdep              24576  2 snd_usb_audio,snd_hda_codec 
> asus_wmi              118784  1 eeepc_wmi 
> gf128mul               12288  1 aesni_intel 
> phy_package            16384  1 realtek 
> cfg80211             1581056  4 mt76,mac80211,mt76_connac_lib,mt7925_common 
> rapl                   20480  0 
> snd_pcm               221184  5 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core 
> wmi_bmof               12288  0 
> sparse_keymap          12288  1 asus_wmi 
> mdio_devres            12288  1 r8169 
> snd_timer              57344  3 snd_seq,snd_hrtimer,snd_pcm 
> pcspkr                 12288  0 
> i2c_piix4              40960  0 
> rfkill                 45056  10 mt7925e,asus_wmi,bluetooth,cfg80211 
> snd                   159744  26 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_timer,snd_hda_codec_realtek_lib,snd_ump,s
> nd_pcm,snd_rawmidi 
> libarc4                12288  1 mac80211 
> libphy                229376  4 r8169,mdio_devres,realtek,phy_package 
> i2c_smbus              20480  1 i2c_piix4 
> k10temp                12288  0 
> aead                   16384  2 mac80211,aesni_intel 
> soundcore              16384  1 snd 
> mdio_bus               28672  4 r8169,libphy,realtek,phy_package 
> gpio_amdpt             16384  0 
> thunderbolt           614400  1 typec 
> gpio_generic           24576  1 gpio_amdpt 
> mac_hid                12288  0 
> vboxnetflt             45056  0 
> vboxnetadp             32768  0 
> vboxdrv               729088  2 vboxnetadp,vboxnetflt 
> kvm_amd               266240  0 
> ccp                   225280  1 kvm_amd 
> kvm                  1490944  1 kvm_amd 
> dm_mod                237568  0 
> irqbypass              16384  1 kvm 
> uinput                 28672  0 
> i2c_dev                28672  0 
> crypto_user            16384  0 
> amdgpu              17956864  51 
> drm_buddy              12288  1 amdgpu 
> amdxcp                 12288  1 amdgpu 
> i2c_algo_bit           24576  1 amdgpu 
> drm_ttm_helper         20480  1 amdgpu 
> ttm                   151552  2 amdgpu,drm_ttm_helper 
> drm_exec               12288  1 amdgpu 
> drm_panel_backlight_quirks    12288  1 amdgpu 
> nvme                   77824  2 
> gpu_sched              77824  1 amdgpu 
> nvme_core             294912  3 nvme 
> hid_multitouch         40960  0 
> drm_suballoc_helper    20480  1 amdgpu 
> nvme_keyring           20480  1 nvme_core 
> drm_display_helper    303104  1 amdgpu 
> video                  81920  2 asus_wmi,amdgpu 
> nvme_auth              32768  1 nvme_core 
> cec                   102400  2 drm_display_helper,amdgpu 
> wmi                    40960  3 video,asus_wmi,wmi_bmof

It wasn’t the watchdog that stopped the shutdown, watchdog was the last thing running before what was stopping it ( i think.)

Please provide an inxi. There is something with recent kernels and amd i am afraid, but sofar we do not have a clear idea what exactly. No clear pattern.

Please notice this watchdog message needn’t be an error. Sometimes i got such a message too and it took quite some time until the system eventually shut down. But this doesn’t happen regularly. Perhaps a few times, I didn’t count. So, to me it isn’t obvious whether there was a real problem at the beginning. However, you might have a problem now and I would suggest that you revert the changes - the “this and that” and the “this”.

Especially, this, as well the other stuff, and, you know, the whatcha-might-call-it which does that doodah thing with the gizmo stuff.

:face_with_hand_over_mouth:

Neither this :dog_face: nor that :service_dog: or the other one :poodle: is the problem. Speaking from experience since i also disabled all dogs cause i wanted to shed some milliseconds from boot or shutdown. Didn’t make a difference and by definition if a dog misbehaves it will restart the machine and not block it.

I guess it is time to try watch :cat:

I’d actually expect the first (few) boot cycle(s) to take a bit longer, whilst maintenance tasks are carried out, especially if the machine hasn’t been running for long before the first reboot.

I recommend you wait longer, or are you saying it never times out and shuts down or reboots …? :thinking:

Also, this is well worth a read:

… Forcing a hard shutdown may well cause filesystem corruption. :wink:

Welcome to the forum Comute. Don’t mind the “Guys being funny”. :wink:

But as Teo said just under your post:

Please post at least the result of inxi -zv8 so we get more info about your system.

When posting the info, either put three backticks ( ` -sign) on an empty line before and after it, or paint over the text and then press “preformatted text” </> from the post toolbar. With long entries, you might also want to use “hide details” on it from behind the + -button on the toolbar to make the post more manageable.

Indeed … and I also forgot to give @Comute a proper Welcome. :vulcan_salute:

I’ve added my usual quick guide:

Open a Terminal and issue e command given by @ilenisaatio, then copy and paste it here:

inxi -zv8

Note that the output produced by this command is privacy-filtered.

Please also remember to use proper code formatting as this makes it much easier to read on the Forum:

[Mini How-To] format code or command output

Select and copy all the text in the Terminal window (minus the prompt, if you are using zsh).
Then paste the output in between two lines containing three backticks
```
or three tildes
~~~

Or:
Copy & paste, then highlight the pasted text and click the </> button at the top of the reply window (easier for smaller outputs).

Cheers! :wink:

I have two suggestions that may help you troubleshoot if you get the console screen with the watchdog messages and it appears the machine may have frozen:

  1. Press the Esc key. If something is waiting to time out you may be able to see a counter and what exactly the machine is waiting for.
  2. If you have a Numlock key (or something similar) on your keyboard (i.e. a key with an indicator light that you can toggle on and off), try pressing that and if the indicator light changes then the machine is not frozen but probably waiting for something to time out, which could take a minute or longer.

Hi, back from holiday, thanks for your tips!

Sad to see nobody got the Lonely Island reference (no seriously I will try to get better practices please be gentle)

So here is the result of inxi command:

See inxi -zv8 result
❯ inxi -zv8
System:
  Kernel: 7.2.0-rc7-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 16.1.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-7.2-x86_64
    root=UUID=2ad51777-c6f1-49ac-bc13-70e72f9bb5d8 rw nowatchdog quiet splash
    nowatchdog acpi=force apm=power_off
  Desktop: KDE Plasma v: 6.7.4 tk: Qt v: N/A info: frameworks v: 6.28.0
    wm: kwin_wayland vt: 1 dm: SDDM Distro: Manjaro base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: PRIME X870-P WIFI v: Rev 1.xx
    serial: <superuser required> part-nu: SKU uuid: <superuser required>
    Firmware: UEFI vendor: American Megatrends v: 1681 date: 06/18/2026
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 64 GiB available: 61.94 GiB used: 21.87 GiB (35.3%)
  Message: For most reliable report, use superuser + dmidecode.
  Array-1: capacity: 256 GiB slots: 4 modules: 2 EC: None
    max-module-size: 64 GiB note: est.
  Device-1: Channel-A DIMM 0 type: no module installed
  Device-2: Channel-A DIMM 1 type: DDR5 detail: synchronous unbuffered
    (unregistered) size: 32 GiB speed: spec: 5600 MT/s actual: 5200 MT/s
    volts: note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
    manufacturer: Micron part-no: CP32G64C40U5W.M8B1 serial: <filter>
  Device-3: Channel-B DIMM 0 type: no module installed
  Device-4: Channel-B DIMM 1 type: DDR5 detail: synchronous unbuffered
    (unregistered) size: 32 GiB speed: spec: 5600 MT/s actual: 5200 MT/s
    volts: note: check curr: 1 min: 1 max: 1 width (bits): data: 64 total: 64
    manufacturer: Micron part-no: CP32G64C40U5W.M8B1 serial: <filter>
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD Ryzen 7 7800X3D bits: 64 type: MT MCP arch: Zen 4 gen: 4
    level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
    model-id: 0x61 (97) stepping: 2 microcode: 0xA60120C
  Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2
    smt: enabled cache: L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 8 MiB
    desc: 8x1024 KiB L3: 96 MiB desc: 1x96 MiB
  Speed (MHz): avg: 4839 min/max: 426/5053 boost: enabled scaling:
    driver: amd-pstate-epp governor: powersave cores: 1: 4839 2: 4839 3: 4839
    4: 4839 5: 4839 6: 4839 7: 4839 8: 4839 9: 4839 10: 4839 11: 4839 12: 4839
    13: 4839 14: 4839 15: 4839 16: 4839 bogomips: 134142
  Flags: 3dnowprefetch abm adx aes amd_lbr_pmc_freeze amd_lbr_v2 aperfmperf
    apic arat avic avx avx2 avx512_bf16 avx512_bitalg avx512_vbmi2
    avx512_vnni avx512_vpopcntdq avx512bw avx512cd avx512dq avx512f
    avx512ifma avx512vbmi avx512vl bmi1 bmi2 bpext cat_l3 cdp_l3 clflush
    clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid
    cpuid_fault cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc
    cr8_legacy cx16 cx8 de decodeassists erms extapic extd_apicid f16c
    flush_l1d flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt gfni ht
    hw_pstate ibpb ibrs ibrs_enhanced ibs invpcid irperf lahf_lm lbrv lm mba
    mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc
    nopl npt nrip_save nx ospke osvw overflow_recov pae pat pausefilter
    pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb perfmon_v2
    pfthreshold pge pku pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed
    rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2
    sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext
    tsc tsc_scale umip user_shstk v_spec_ctrl vaes vgif vmcb_clean vme
    vmmcall vnmi vpclmulqdq wbnoinvd wdt x2avic xgetbv1 xsave xsavec
    xsaveerptr xsaveopt xsaves xtopology
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: ghostwrite status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: old_microcode status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow mitigation: Safe RET
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
    conditional; STIBP: always-on; PBRSB-eIBRS: Not affected; BHI: Not
    affected
  Type: srbds status: Not affected
  Type: tsa mitigation: Clear CPU buffers
  Type: tsx_async_abort status: Not affected
  Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
  Device-1: Advanced Micro Devices [AMD/ATI] Navi 44 [Radeon RX 9060 XT]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: RDNA-4 code: Navi-4x
    process: TSMC n4 (4nm) built: 2025+ pcie: gen: 5 speed: 32 GT/s lanes: 16
    ports: active: DP-2,HDMI-A-1 empty: DP-1,Writeback-1 bus-ID: 03:00.0
    chip-ID: 1002:7590 class-ID: 0300
  Device-2: Advanced Micro Devices [AMD/ATI] Raphael vendor: ASUSTeK
    driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm)
    built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: none
    empty: DP-3, DP-4, HDMI-A-2, Writeback-2 bus-ID: 74:00.0
    chip-ID: 1002:164e class-ID: 0300 temp: 52.0 C
  Device-3: Logitech Webcam C310 driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-1:2 chip-ID: 046d:081b
    class-ID: 0102 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.24 with: Xwayland v: 24.1.13
    compositor: kwin_wayland driver: X: loaded: amdgpu
    unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu d-rect: 4480x1440 display-ID: 0
  Monitor-1: DP-2 pos: primary,left model: XG27ACS serial: <filter>
    built: 2023 res: mode: 2560x1440 hz: 180 scale: 100% (1) dpi: 109 gamma: 1.2
    chroma: red: x: 0.678 y: 0.314 green: x: 0.275 y: 0.647 blue: x: 0.141
    y: 0.047 white: x: 0.314 y: 0.329 size: 597x336mm (23.5x13.23")
    diag: 685mm (27") ratio: 16:9 modes: 2560x1440, 2560x1080, 1920x1080,
    1680x1050, 1280x1024, 1440x900, 1280x960, 1152x864, 1280x720, 1024x768,
    800x600, 720x576, 720x480, 640x480, 720x400
  EDID-Warnings: 1: parse_edid: unhandled CEA mode 92 2: parse_edid:
    unknown tag 112
  Monitor-2: HDMI-A-1 pos: right model: Acer G246HL serial: <filter>
    built: 2017 res: mode: 1920x1080 hz: 60 scale: 100% (1) dpi: 92 gamma: 1.2
    chroma: red: x: 0.651 y: 0.333 green: x: 0.333 y: 0.624 blue: x: 0.157
    y: 0.051 white: x: 0.314 y: 0.329 size: 531x299mm (20.91x11.77")
    diag: 609mm (24") ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024,
    1440x900, 1280x960, 1280x800, 1152x864, 1280x720, 1024x768, 832x624,
    800x600, 720x576, 720x480, 640x480, 720x400
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
    device: 1 drv: radeonsi device: 2 drv: swrast gbm: drv: radeonsi
    surfaceless: drv: radeonsi wayland: drv: radeonsi x11: drv: radeonsi
  API: OpenGL v: 4.6 vendor: amd mesa v: 26.1.6-arch1.1 glx-v: 1.4
    direct-render: yes renderer: AMD Radeon RX 9060 XT (radeonsi gfx1200 ACO
    DRM 3.64 7.2.0-rc7-1-MANJARO) device-ID: 1002:7590 memory: 15.62 GiB
    unified: no display-ID: :1.0
  API: Vulkan v: 1.4.357 layers: 6 device: 0 type: discrete-gpu name: AMD
    Radeon RX 9060 XT (RADV GFX1200) driver: mesa radv v: 26.1.6-arch1.1
    device-ID: 1002:7590 surfaces: N/A device: 1 type: integrated-gpu name: AMD
    Ryzen 7 7800X3D 8-Core Processor (RADV RAPHAEL_MENDOCINO)
    driver: mesa radv v: 26.1.6-arch1.1 device-ID: 1002:164e surfaces: N/A
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
    de: kscreen-console,kscreen-doctor wl: wayland-info
    x11: xdpyinfo, xprop, xrandr
Audio:
  Device-1: Advanced Micro Devices [AMD/ATI] Navi 48 HDMI/DP Audio
    driver: snd_hda_intel v: kernel pcie: gen: 5 speed: 32 GT/s lanes: 16
    bus-ID: 03:00.1 chip-ID: 1002:ab40 class-ID: 0403
  Device-2: Advanced Micro Devices [AMD/ATI] Radeon High Definition Audio
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
    lanes: 16 bus-ID: 74:00.1 chip-ID: 1002:1640 class-ID: 0403
  Device-3: Advanced Micro Devices [AMD] Ryzen HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 74:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Device-4: Logitech Webcam C310 driver: snd-usb-audio,uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-1:2 chip-ID: 046d:081b
    class-ID: 0102 serial: <filter>
  Device-5: Yamaha AG06/AG03 driver: snd-usb-audio type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 7-1.1:3 chip-ID: 0499:170d
    class-ID: 0103
  API: ALSA v: k7.2.0-rc7-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: JACK v: 1.9.22 status: off tools: N/A
  Server-3: PipeWire v: 1.6.8 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 07:00.0
    chip-ID: 10ec:8125 class-ID: 0200
  IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: MEDIATEK MT7925 802.11be 160MHz 2x2 PCIe Wireless Network
    Adapter [Filogic 360] vendor: AzureWave driver: mt7925e v: kernel pcie:
    gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 08:00.0 chip-ID: 14c3:7925
    class-ID: 0280
  IF: wlp8s0 state: down mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
  WAN IP: <filter>
Bluetooth:
  Device-1: IMC Networks Wireless_Device driver: btusb v: 0.8 type: USB
    rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-2:2 chip-ID: 13d3:3602
    class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 4.55 TiB used: 230.01 GiB (4.9%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SNV3S1000G
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: P3BR0A27 temp: 53.9 C
    scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT2000BX500SSD1
    size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 061 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT2000BX500SSD1
    size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 061 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 931.22 GiB size: 915.53 GiB (98.32%)
    used: 126.4 GiB (13.8%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
    label: N/A uuid: 2ad51777-c6f1-49ac-bc13-70e72f9bb5d8
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 31.6 MiB (10.6%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
    label: N/A uuid: 6397-A71B
  ID-3: /run/media/corentin/3ef604ef-3856-4430-acca-89e7d9c47ac5
    raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 36.94 GiB (2.0%) fs: ext4
    dev: /dev/sdb1 maj-min: 8:17 label: N/A
    uuid: 3ef604ef-3856-4430-acca-89e7d9c47ac5
  ID-4: /run/media/corentin/B846407846403980 raw-size: 194.54 GiB
    size: 194.54 GiB (100.00%) used: 66.64 GiB (34.3%) fs: ntfs dev: /dev/sda2
    maj-min: 8:2 label: N/A uuid: B846407846403980
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-2: /dev/sda3 maj-min: 8:3 size: 793 MiB fs: ntfs label: N/A
    uuid: 182E9FEC2E9FC164
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-2:2 info: IMC Networks Wireless_Device type: bluetooth
    driver: btusb interfaces: 3 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 13d3:3602 class-ID: e001 serial: <filter>
  Device-2: 1-7:3 info: ASUSTek AURA LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 16mA chip-ID: 0b05:19af class-ID: 0300
    serial: <filter>
  Hub-2: 2-0:1 info: super-speed hub ports: 6 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-2:2 info: Logitech Logi Bolt Receiver type: keyboard,mouse,HID
    driver: hid-generic,hid-multitouch,usbhid interfaces: 4 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
    chip-ID: 046d:c548 class-ID: 0300
  Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 5-1:2 info: Logitech Webcam C310 type: video,audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 046d:081b class-ID: 0102 serial: <filter>
  Device-2: 5-2:3 info: Ducky One 3̠ type: HID,keyboard,mouse
    driver: hid-generic,usbhid interfaces: 5 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 100mA chip-ID: 3233:1011 class-ID: 0300
    serial: <filter>
  Hub-6: 6-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-7: 7-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-8: 7-1:2 info: Microchip (formerly SMSC) ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 2mA
    chip-ID: 0424:2422 class-ID: 0900
  Device-1: 7-1.1:3 info: Yamaha AG06/AG03 type: audio driver: snd-usb-audio
    interfaces: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
    power: 500mA chip-ID: 0499:170d class-ID: 0103
  Hub-9: 8-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-10: 9-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 62.9 C mobo: N/A
  Fan Speeds (rpm): N/A
  GPU: device: amdgpu temp: 54.0 C mem: 71.0 C fan: 0 watts: 26.00
    device: amdgpu temp: 51.0 C
Repos:
  Packages: 1342 pm: pacman pkgs: 1336 libs: 392 tools: pamac pm: flatpak
    pkgs: 6
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://mirror.init7.net/manjaro/stable/$repo/$arch
    2: https://ftp.halifax.rwth-aachen.de/manjaro/stable/$repo/$arch
    3: https://mirror.alwyzon.net/manjaro/stable/$repo/$arch
    4: https://mirror.it4i.cz/manjaro/stable/$repo/$arch
    5: https://muug.ca/mirror/manjaro/stable/$repo/$arch
    6: https://mirror.math.princeton.edu/pub/manjaro/stable/$repo/$arch
    7: https://mirrors.sonic.net/manjaro/stable/$repo/$arch
    8: https://manjaro.c3sl.ufpr.br/stable/$repo/$arch
Processes:
  CPU top: 5 of 440
  1: cpu: 147% command: VirtualBoxVM pid: 8270 mem: 10965.4 MiB (17.2%)
  2: cpu: 4.5% command: steamwebhelper pid: 4148 mem: 565.7 MiB (0.8%)
  3: cpu: 3.8% command: kwin_wayland pid: 1187 mem: 304.0 MiB (0.4%)
  4: cpu: 2.7% command: steamwebhelper pid: 4038 mem: 264.6 MiB (0.4%)
  5: cpu: 2.2% command: Discord pid: 7474 mem: 484.3 MiB (0.7%)
  Memory top: 5 of 440
  1: mem: 10965.4 MiB (17.2%) command: VirtualBoxVM pid: 8270 cpu: 147%
  2: mem: 729.3 MiB (1.1%) command: firefox pid: 2506 cpu: 0.8%
  3: mem: 628.2 MiB (0.9%) command: firefox pid: 7086 cpu: 1.4%
  4: mem: 565.7 MiB (0.8%) command: steamwebhelper pid: 4148 cpu: 4.5%
  5: mem: 518.2 MiB (0.8%) command: ./steamwebhelper pid: 3990 cpu: 0.3%
Info:
  Processes: 440 Power: uptime: 1h 0m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 24.68 GiB services: org_kde_powerdevil,
    power-profiles-daemon, upowerd Init: systemd v: 261 default: graphical
    tool: systemctl
  Compilers: N/A Shell: Zsh v: 5.9.2 running-in: konsole inxi: 3.3.41


I tried to wait ~15 minutes, so I consider that it never does


I will try that this evening, I can’t for now

I see an amd in the inxi. And kernel 7.2rc7.
Update first since the final 7.2 fixed some rebooting problems.

Quite the rig there… I wish I had a rig like that :sob:
As @Teo said, update the kernel

This is rather long. Still please notice it can’t be watchdog, and my general advice is to revert any changes which don’t relate to the issue one wants to fix. This is simply to avoid making things worse by introducing new issues :man_shrugging:

Seems you’re running VirtualBox. That may well be a genuine reason why an attempt to shut down the system gets stuck. I would propose to investigate in this direction.

@Comute

Shutdown difficulties in Virtualbox (or WMware, for that matter) are (excuse the pun) virtually always attributable to configuration of the application itself, in my experience.

I had to leave this quickly, and didn’t have opportunity to continue my train of thought. :eyes:

However, that’s not the issue in this case.

Based on the information provided, the observation made by @jofi is quite plausible; that being the case, then a change (of habit) is as good as a holiday (hope you enjoyed yours).

If you have been running a virtual machine (VM), I recommend that it be fully shut down before even considering shutting down your actual computer. Adopting this habit with (any) resource-intensive applications will help minimize the potential for similar issues.

Possibly lacking advanced experience with the technology.

However, there is also the Windows mentality that unfortunately remains with many newer users, stretches back to the early days of Windows computing where a commonplace method for shutdown was to press the big button.

Seems that the OP has no knowledge that a running VM can be automatically suspended on shutdown / reboot. So it remains that it tries to shutdown while a VM is running

Does it wait for some signal from hardware that never arrives because of it being in a VM? (I won’t continue this tangent further.)

:rofl: