After the latest update with the kernel 5.10.2-2-MANJARO, everything takes longer to load and the system chugs constantly. It appears like every time the OS hits my SSD for anything, it chugs for a second before loading whatever it needs. Switching to an older kernel such as 5.9 fixes the issue.
Anyone know what could cause this?
I’m running Manjaro with the Budgie DE, and and AMD RX570 graphics card with AMDGPU graphics drivers.
check fisrt post on stable with 5.10 kernels and amdpgu
you have to add amdgpu.dc=0 on boot kernel
Adding amdgpu.dc=0 in my boot kernel options did not fix the issue. I don’t think it’s a graphics driver issue.
Here is my output of inxi -Fazy when using the 5.10 kernel:
System:
Kernel: 5.10.2-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=dbbea441-3752-4f96-a20b-bef027770291 rw quiet apparmor=1
security=apparmor udev.log_priority=3 amdgpu.dc=0
Desktop: Budgie 10.5.2 info: budgie-panel wm: budgie-wm dm: LightDM 1.30.0
Distro: Manjaro Linux
Machine:
Type: Desktop System: ASUS product: All Series v: N/A serial: <filter>
Mobo: ASUSTeK model: Z97-A v: Rev 1.xx serial: <filter>
UEFI: American Megatrends v: 3503 date: 04/18/2018
CPU:
Info: Quad Core model: Intel Core i7-4790K bits: 64 type: MT MCP
arch: Haswell family: 6 model-id: 3C (60) stepping: 3 microcode: 28
L2 cache: 8 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 64029
Speed: 800 MHz min/max: 800/4400 MHz Core speeds (MHz): 1: 800 2: 801 3: 800
4: 800 5: 800 6: 800 7: 800 8: 800
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: XFX Pine driver: amdgpu v: kernel bus ID: 01:00.0 chip ID: 1002:67df
Display: x11 server: X.org 1.20.10 compositor: budgie-wm driver: amdgpu,ati
unloaded: modesetting alternate: fbdev,vesa resolution: <missing: xdpyinfo>
OpenGL: renderer: Radeon RX 570 Series (POLARIS10 DRM 3.40.0
5.10.2-2-MANJARO LLVM 11.0.0)
v: 4.6 Mesa 20.3.1 direct render: Yes
Audio:
Device-1: Intel 9 Series Family HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:8ca0
Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: XFX Pine driver: snd_hda_intel v: kernel bus ID: 01:00.1
chip ID: 1002:aaf0
Device-3: GYROCOM C&C Fiio E10 type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 3-3.3:4 chip ID: 1852:7022
Device-4: AKAI Professional M.I. MPK225 type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 3-9:3 chip ID: 09e8:0023
serial: <filter>
Sound Server: ALSA v: k5.10.2-2-MANJARO
Network:
Device-1: Intel Ethernet I218-V vendor: ASUSTeK driver: e1000e v: kernel
port: f040 bus ID: 00:19.0 chip ID: 8086:15a1
IF: eno1 state: down mac: <filter>
Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel port: e000
bus ID: 05:00.0 chip ID: 8086:08b1
IF: wlp5s0 state: up mac: <filter>
Drives:
Local Storage: total: 1.14 TiB used: 155.92 GiB (13.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 250GB
size: 232.89 GiB block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 1B6Q
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD10EZEX-00BN5A0
size: 931.51 GiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 1A01
Partition:
ID-1: / raw size: 232.59 GiB size: 227.94 GiB (98.00%)
used: 117.64 GiB (51.6%) fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%)
used: 280 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap:
Alert: No Swap data was found.
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: amdgpu temp: 41.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1085
Info:
Processes: 275 Uptime: 2m wakeups: 0 Memory: 15.58 GiB
used: 1.89 GiB (12.2%) Init: systemd v: 247 Compilers: gcc: 10.2.0
clang: 11.0.0 Packages: pacman: 1432 lib: 426 Shell: Bash v: 5.1.0
running in: gnome-terminal inxi: 3.2.01
and my output of sudo dmesg -l emerg,alert,crit,err,warn
[ 0.139772] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.139772] #5 #6 #7
[ 0.145602] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.642231] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330)
[ 0.642236] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529)
[ 0.642906] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330)
[ 0.642910] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529)
[ 0.643405] ata1.00: supports DRM functions and may not be fully accessible
[ 0.643864] ata1.00: NCQ Send/Recv Log not supported
[ 0.644896] ata1.00: supports DRM functions and may not be fully accessible
[ 0.645217] ata1.00: NCQ Send/Recv Log not supported
[ 1.723665] usb 3-9: config 13 interface 2 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[ 2.428847] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200925/utaddress-204)
[ 2.428855] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20200925/utaddress-204)
[ 2.428858] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 2.428862] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20200925/utaddress-204)
[ 2.428865] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204)
[ 2.428867] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 2.428871] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20200925/utaddress-204)
[ 2.428873] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204)
[ 2.428876] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 2.428879] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.667518] at24 0-0050: supply vcc not found, using dummy regulator
[ 2.668253] at24 0-0051: supply vcc not found, using dummy regulator
[ 2.668801] at24 0-0052: supply vcc not found, using dummy regulator
[ 2.673146] at24 0-0053: supply vcc not found, using dummy regulator
[ 3.115666] CRAT table not found
[ 3.116002] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 3.116201] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 3.116206] caller pci_map_rom+0x68/0x190 mapping multiple BARs
[ 5.927613] kauditd_printk_skb: 68 callbacks suppressed
[ 13.017368] kauditd_printk_skb: 5 callbacks suppressed
[ 23.500603] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.500624] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.500963] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.500977] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.501306] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.501319] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.501954] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.501969] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.502594] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.502608] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.504068] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.504086] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.504425] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.504438] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.504766] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.504779] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.505368] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.505383] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.506005] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.506018] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.507950] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.507968] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.508532] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.508547] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.509108] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.509121] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.509882] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.509896] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.510704] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.510717] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.512944] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.512961] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.513660] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.513674] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.514363] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.514377] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.515261] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.515276] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.516221] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.516235] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.518033] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.518052] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.518389] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.518404] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.518782] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.518797] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.519375] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.519389] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.520008] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.520021] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.521746] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.521787] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.522127] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.522141] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.522470] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.522483] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.523054] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.523068] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.523689] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.523702] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.525918] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.525935] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.526501] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.526515] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.527065] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.527078] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.527839] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.527852] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.528682] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.528697] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.531179] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.531197] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.531904] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.531920] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.532626] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.532640] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.533524] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.533538] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.534467] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.534480] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.569647] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.569666] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.570003] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.570017] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.570353] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.570369] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.571000] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.571019] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.571688] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.571707] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.573317] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.573337] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.573687] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.573703] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.574048] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.574062] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.574684] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.574704] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.575435] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.575456] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.577929] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.577951] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.578647] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.578668] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.579362] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.579381] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.580318] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.580340] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.581354] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.581376] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.584312] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.584337] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.585245] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.585267] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.586171] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.586194] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.587303] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.587322] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.588503] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.588523] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.590846] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.590867] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.591256] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.591276] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.591659] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.591680] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.592373] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.592397] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.593160] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.593181] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.595497] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.595522] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.595935] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.595955] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.596342] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.596359] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.597009] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.597027] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.597742] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.597762] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.600586] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.600611] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.601299] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.601318] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.602045] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.602068] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.602991] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.603012] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.603991] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.604011] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.607058] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.607081] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.607726] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.607738] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.608352] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.608362] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.609196] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.609215] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 23.610369] usb 3-3.3: Not enough bandwidth for new device state.
[ 23.610392] usb 3-3.3: 2:2: usb_set_interface failed (-28)
[ 26.032996] kauditd_printk_skb: 11 callbacks suppressed
And this is the output when I boot using the 5.4.85 kernel that does not have this issue.
Output of inxi -Fazy:
System:
Kernel: 5.4.85-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64
root=UUID=dbbea441-3752-4f96-a20b-bef027770291 rw quiet apparmor=1
security=apparmor udev.log_priority=3 amdgpu.dc=0
Desktop: Budgie 10.5.2 info: budgie-panel wm: budgie-wm dm: LightDM 1.30.0
Distro: Manjaro Linux
Machine:
Type: Desktop System: ASUS product: All Series v: N/A serial: <filter>
Mobo: ASUSTeK model: Z97-A v: Rev 1.xx serial: <filter>
UEFI: American Megatrends v: 3503 date: 04/18/2018
CPU:
Info: Quad Core model: Intel Core i7-4790K bits: 64 type: MT MCP
arch: Haswell family: 6 model-id: 3C (60) stepping: 3 microcode: 28
L2 cache: 8 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 64033
Speed: 1001 MHz min/max: 800/4400 MHz Core speeds (MHz): 1: 1001 2: 999
3: 1000 4: 1000 5: 1002 6: 1000 7: 1000 8: 1000
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: XFX Pine driver: amdgpu v: kernel bus ID: 01:00.0 chip ID: 1002:67df
Display: x11 server: X.org 1.20.10 compositor: budgie-wm driver: amdgpu,ati
unloaded: modesetting alternate: fbdev,vesa resolution: <missing: xdpyinfo>
OpenGL: renderer: Radeon RX 570 Series (POLARIS10 DRM 3.35.0
5.4.85-1-MANJARO LLVM 11.0.0)
v: 4.6 Mesa 20.3.1 direct render: Yes
Audio:
Device-1: Intel 9 Series Family HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:8ca0
Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: XFX Pine driver: snd_hda_intel v: kernel bus ID: 01:00.1
chip ID: 1002:aaf0
Device-3: GYROCOM C&C Fiio E10 type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 2-3.3:4 chip ID: 1852:7022
Device-4: AKAI Professional M.I. MPK225 type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 2-9:3 chip ID: 09e8:0023
serial: <filter>
Sound Server: ALSA v: k5.4.85-1-MANJARO
Network:
Device-1: Intel Ethernet I218-V vendor: ASUSTeK driver: e1000e v: 3.2.6-k
port: f040 bus ID: 00:19.0 chip ID: 8086:15a1
IF: eno1 state: down mac: <filter>
Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel port: e000
bus ID: 05:00.0 chip ID: 8086:08b1
IF: wlp5s0 state: up mac: <filter>
Drives:
Local Storage: total: 1.14 TiB used: 155.92 GiB (13.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 250GB
size: 232.89 GiB block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 1B6Q
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD10EZEX-00BN5A0
size: 931.51 GiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 1A01
Partition:
ID-1: / raw size: 232.59 GiB size: 227.94 GiB (98.00%)
used: 117.65 GiB (51.6%) fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%)
used: 280 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap:
Alert: No Swap data was found.
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: amdgpu temp: 43.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1099
Info:
Processes: 266 Uptime: 1m wakeups: 0 Memory: 15.58 GiB
used: 1.79 GiB (11.5%) Init: systemd v: 247 Compilers: gcc: 10.2.0
clang: 11.0.0 Packages: pacman: 1432 lib: 426 Shell: Bash v: 5.1.0
running in: gnome-terminal inxi: 3.2.01
And the output of sudo dmesg -l emerg,alert,crit,err,warn
[ 0.182366] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.182366] #5 #6 #7
[ 0.188433] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.861707] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.861727] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.863000] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.863020] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.863048] ata1.00: supports DRM functions and may not be fully accessible
[ 0.863664] ata1.00: NCQ Send/Recv Log not supported
[ 0.865229] ata1.00: supports DRM functions and may not be fully accessible
[ 0.865695] ata1.00: NCQ Send/Recv Log not supported
[ 1.413134] usb 2-9: config 13 interface 2 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[ 2.348148] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204)
[ 2.348155] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20190816/utaddress-204)
[ 2.348158] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 2.348161] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20190816/utaddress-204)
[ 2.348164] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 2.348166] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 2.348169] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20190816/utaddress-204)
[ 2.348171] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204)
[ 2.348174] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-204)
[ 2.348176] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.690316] proc: Bad value for 'hidepid'
[ 2.746783] proc: Bad value for 'hidepid'
[ 2.871418] proc: Bad value for 'hidepid'
[ 2.909424] CRAT table not found
[ 2.911565] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 2.911569] caller pci_map_rom+0x68/0x171 mapping multiple BARs
[ 5.253516] kauditd_printk_skb: 52 callbacks suppressed
[ 11.420204] proc: Bad value for 'hidepid'
[ 11.709372] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.709376] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.709629] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.709632] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.709872] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.709874] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.710170] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.710172] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.710476] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.710478] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.710917] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.710920] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.711175] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.711178] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.711434] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.711437] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.711735] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.711737] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.712044] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.712046] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.712570] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.712573] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.712858] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.712861] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.713158] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.713160] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.713493] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.713495] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.713836] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.713838] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.714407] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.714410] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.714726] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.714728] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.715044] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.715046] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.715416] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.715418] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.715776] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.715778] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.716264] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.716266] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.716531] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.716534] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.716789] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.716792] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.717097] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.717101] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.717427] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.717430] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.718002] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.718006] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.718264] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.718267] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.718521] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.718524] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.718837] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.718841] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.719167] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.719170] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.719814] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.719818] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.720137] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.720140] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.720441] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.720444] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.720798] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.720801] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.721171] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.721176] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.721903] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.721907] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.722239] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.722242] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.722574] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.722578] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.722955] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.722958] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.723347] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.723350] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.733054] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.733057] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.733321] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.733324] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.733572] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.733575] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.733866] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.733868] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.734168] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.734170] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.734625] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.734628] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.734878] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.734881] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.735136] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.735138] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.735433] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.735435] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.735737] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.735739] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.736252] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.736255] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.736553] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.736555] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.736852] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.736854] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.737187] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.737189] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.737529] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.737531] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.738137] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.738140] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.738457] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.738459] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.738771] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.738774] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.739136] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.739139] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.739502] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.739505] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.740022] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.740025] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.740277] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.740280] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.740531] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.740534] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.740833] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.740835] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.741150] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.741154] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.741674] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.741677] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.741931] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.741934] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.742185] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.742188] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.742488] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.742491] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.742802] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.742805] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.743388] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.743392] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.743674] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.743677] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.743962] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.743965] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.744296] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.744299] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.744647] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.744649] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.745288] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.745292] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.745608] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.745611] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.745923] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.745926] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.746279] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.746282] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 11.746644] usb 2-3.3: Not enough bandwidth for new device state.
[ 11.746647] usb 2-3.3: 2:2: usb_set_interface failed (-28)
[ 20.986366] kauditd_printk_skb: 11 callbacks suppressed
Okay, so there is this error with the new kernel that wasn’t there before. However, the amdgpu.dc=0 workaround does not fix it.
Hm. trusted memory zone (for encrypted vram)
I dont know if its related … but you can add boot option to check:
amdgpu.tmz=0
PS … I notice another difference with the newer kernel:
[ 2.667518] at24 0-0050: supply vcc not found, using dummy regulator
[ 2.668253] at24 0-0051: supply vcc not found, using dummy regulator
[ 2.668801] at24 0-0052: supply vcc not found, using dummy regulator
[ 2.673146] at24 0-0053: supply vcc not found, using dummy regulator
Which seems to have replaced common-often-cosmetic lines in the older kernel:
[ 2.690316] proc: Bad value for 'hidepid'
[ 2.746783] proc: Bad value for 'hidepid'
[ 2.871418] proc: Bad value for 'hidepid'
[ 11.420204] proc: Bad value for 'hidepid'
(see reference proc: Bad value for 'hidepid' · Issue #16896 · systemd/systemd · GitHub)
I have the exact same problem. I’m on Intel machine: both CPU and GPU. I don’t use NVIDIA dGPU.
5.10 is very uncomfortable to use.
The problem is not specific to UI oraz GPU. Even saving a file in LibreOffice Writer takes much more time. Desktop starts slower and I see the drive lighting up like crazy. I have a very good SSD, but sometimes it almost feels like it’s an old HDD. Even displaying a web page (gmail or YouTube) takes more time. The entire system is sluggish.
All the below logs are from 5.10.2-2.
inxi -Fazy:
System:
Kernel: 5.10.2-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/vmlinuz-5.10-x86_64
root=UUID=8d5274e2-a298-4bc3-894c-c2e5249a7c83 ro scsi_mod.use_blk_mq=1
intel_pstate=disable mitigations=off udev.log_priority=3
Desktop: Xfce 4.14.3 tk: Gtk 3.24.23 info: xfce4-panel wm: xfwm4
dm: GDM 3.38.2.1 Distro: Manjaro Linux
Machine:
Type: Laptop System: ASUSTeK product: N56JR v: 1.0 serial: <filter>
Mobo: ASUSTeK model: N56JR v: 1.0 serial: <filter> BIOS: American Megatrends
v: N56JR.204 date: 10/31/2013
Battery:
ID-1: BAT0 charge: 48.0 Wh condition: 49.1/48.8 Wh (100%) volts: 11.1/11.1
model: ASUSTeK N56--52 type: Li-ion serial: N/A status: Charging
CPU:
Info: Quad Core model: Intel Core i7-4700HQ bits: 64 type: MT MCP
arch: Haswell family: 6 model-id: 3C (60) stepping: 3 microcode: 28
L2 cache: 6 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 38322
Speed: 798 MHz min/max: 800/2401 MHz boost: enabled Core speeds (MHz):
1: 798 2: 799 3: 800 4: 798 5: 799 6: 799 7: 799 8: 798
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: vulnerable
Type: mds status: Vulnerable; SMT vulnerable
Type: meltdown status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 status: Vulnerable: __user pointer sanitization and
usercopy barriers only; no swapgs barriers
Type: spectre_v2 status: Vulnerable, IBPB: disabled, STIBP: disabled
Type: srbds status: Vulnerable
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 4th Gen Core Processor Integrated Graphics vendor: ASUSTeK
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0416
Device-2: NVIDIA GK106M [GeForce GTX 760M] vendor: ASUSTeK driver: N/A
alternate: nouveau bus ID: 01:00.0 chip ID: 10de:11e3
Device-3: Sunplus Innovation Asus Webcam type: USB driver: uvcvideo
bus ID: 3-7:5 chip ID: 1bcf:2883
Display: x11 server: X.org 1.20.10 driver: modesetting unloaded: nvidia
resolution: <missing: xdpyinfo>
OpenGL: renderer: Mesa DRI Intel HD Graphics 4600 (HSW GT2)
v: 4.5 Mesa 20.3.1 compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio
driver: snd_hda_intel v: kernel bus ID: 00:03.0 chip ID: 8086:0c0c
Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:8c20
Device-3: GYROCOM C&C Audiotrak ProDigy CUBE type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 3-2:2 chip ID: 1852:7921
Sound Server: ALSA v: k5.10.2-2-MANJARO
Network:
Device-1: Intel Wireless 7260 driver: iwlwifi v: kernel port: e000
bus ID: 03:00.0 chip ID: 8086:08b1
IF: wlp3s0 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: N/A modules: r8169 port: d000 bus ID: 04:00.0
chip ID: 10ec:8168
IF-ID-1: virbr0 state: down mac: <filter>
IF-ID-2: virbr0-nic state: down mac: <filter>
Drives:
Local Storage: total: 465.76 GiB used: 231.39 GiB (49.7%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 500GB
size: 465.76 GiB block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 1B6Q
Partition:
ID-1: / raw size: 60 GiB size: 58.81 GiB (98.01%) used: 35.01 GiB (59.5%)
fs: ext4 block size: 4096 B dev: /dev/sda2 maj-min: 8:2
ID-2: /boot raw size: 520 MiB size: 495.8 MiB (95.35%)
used: 103.6 MiB (20.9%) fs: ext4 block size: 4096 B dev: /dev/sda1
maj-min: 8:1
ID-3: /home raw size: 90.01 GiB size: 88.09 GiB (97.87%)
used: 71.94 GiB (81.7%) fs: ext4 block size: 4096 B dev: /dev/sda3
maj-min: 8:3
Swap:
Alert: No Swap data was found.
Sensors:
System Temperatures: cpu: 54.0 C mobo: N/A
Fan Speeds (RPM): cpu: 2600
Info:
Processes: 271 Uptime: 1m wakeups: 1 Memory: 15.34 GiB
used: 2.31 GiB (15.1%) Init: systemd v: 247 Compilers: gcc: 10.2.0
clang: 11.0.0 Packages: pacman: 1788 lib: 473 Shell: Bash v: 5.1.0
running in: xfce4-terminal inxi: 3.2.01
lspci -vv:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: ie31200_edac
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: f6000000-f70fffff [size=17M]
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff [size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 36
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
Subsystem: Intel Corporation Device 2010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 38
Region 0: Memory at f7b14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f7b00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 34
Region 0: Memory at f7b1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7b1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at f7b10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 28
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: f7a00000-f7afffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 29
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: f7900000-f79fffff [size=1M]
Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff [size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: f7800000-f78fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7b1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 31
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7b1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7b19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 760M] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 14ad
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nouveau
03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
Subsystem: Intel Corporation Dual Band Wireless-N 7260
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
Subsystem: ASUSTeK Computer Inc. Device 200f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7900000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: r8169
05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f7800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
sudo lspci -v:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM
Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, fast
devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c
<?> Kernel modules: ie31200_edac
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI
Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26 Bus: primary=00,
secondary=01, subordinate=01, sec-latency=0 I/O behind bridge:
0000e000-0000efff [size=4K] Memory behind bridge: f6000000-f70fffff
[size=17M] Prefetchable memory behind bridge:
00000000e0000000-00000000f1ffffff [size=288M] Capabilities: [88]
Subsystem: ASUSTeK Computer Inc. Device 14ad Capabilities: [80] Power
Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable-
64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities:
[100] Virtual Channel Capabilities: [140] Root Complex Link Capabilities:
[d94] Secondary PCI Express Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor
Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, fast
devsel, latency 0, IRQ 36 Memory at f7400000 (64-bit, non-prefetchable)
[size=4M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports
at f000 [size=64] Expansion ROM at 000c0000 [virtual] [disabled]
[size=128K] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI
Advanced Features Kernel driver in use: i915 Kernel modules: i915
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD
Audio Controller (rev 06)
Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel,
latency 0, IRQ 38 Memory at f7b14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2 Capabilities: [60] MSI:
Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex
Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel
modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB
xHCI (rev 05) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, medium
devsel, latency 0, IRQ 32 Memory at f7b00000 (64-bit, non-prefetchable)
[size=64K] Capabilities: [70] Power Management version 2 Capabilities:
[80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Kernel driver in use:
xhci_hcd Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset
Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, fast
devsel, latency 0, IRQ 34 Memory at f7b1e000 (64-bit, non-prefetchable)
[size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c]
MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB
EHCI #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, medium
devsel, latency 0, IRQ 16 Memory at f7b1c000 (32-bit, non-prefetchable)
[size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58]
Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High
Definition Audio Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, fast
devsel, latency 0, IRQ 37 Memory at f7b10000 (64-bit, non-prefetchable)
[size=16K] Capabilities: [50] Power Management version 2 Capabilities:
[60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express
Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual
Channel Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI
Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 27 Bus: primary=00,
secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: [disabled]
Memory behind bridge: [disabled] Prefetchable memory behind bridge:
[disabled] Capabilities: [40] Express Root Port (Slot-), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities:
[90] Subsystem: ASUSTeK Computer Inc. Device 14ad Capabilities: [a0] Power
Management version 3 Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI
Express Root Port #3 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 28 Bus: primary=00,
secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: [disabled]
Memory behind bridge: f7a00000-f7afffff [size=1M] Prefetchable memory
behind bridge: [disabled] Capabilities: [40] Express Root Port (Slot+),
MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 14ad
Capabilities: [a0] Power Management version 3 Kernel driver in use:
pcieport
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI
Express Root Port #4 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 29 Bus: primary=00,
secondary=04, subordinate=04, sec-latency=0 I/O behind bridge:
0000d000-0000dfff [size=4K] Memory behind bridge: f7900000-f79fffff
[size=1M] Prefetchable memory behind bridge:
00000000f2100000-00000000f21fffff [size=1M] Capabilities: [40] Express
Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1
Maskable- 64bit- Capabilities: [90] Subsystem: ASUSTeK Computer Inc.
Device 14ad Capabilities: [a0] Power Management version 3 Kernel driver in
use: pcieport
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI
Express Root Port #5 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 30 Bus: primary=00,
secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: [disabled]
Memory behind bridge: f7800000-f78fffff [size=1M] Prefetchable memory
behind bridge: [disabled] Capabilities: [40] Express Root Port (Slot+),
MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 14ad
Capabilities: [a0] Power Management version 3 Kernel driver in use:
pcieport
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB
EHCI #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, medium
devsel, latency 0, IRQ 23 Memory at f7b1b000 (32-bit, non-prefetchable)
[size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58]
Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, medium
devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c
<?> Kernel driver in use: lpc_ich Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family
6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, 66MHz,
medium devsel, latency 0, IRQ 31 I/O ports at f0b0 [size=8] I/O ports at
f0a0 [size=4] I/O ports at f090 [size=8] I/O ports at f080 [size=4] I/O
ports at f060 [size=32] Memory at f7b1a000 (32-bit, non-prefetchable)
[size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA
v1.0 Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus
Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: medium devsel, IRQ 18
Memory at f7b19000 (64-bit, non-prefetchable) [size=256] I/O ports at f040
[size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 760M] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 14ad Flags: bus master, fast
devsel, latency 0, IRQ 11 Memory at f6000000 (32-bit, non-prefetchable)
[size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at
f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128]
Expansion ROM at f7000000 [disabled] [size=512K] Capabilities: [60] Power
Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable-
64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4]
Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual
Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor
Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900]
Secondary PCI Express Kernel modules: nouveau
03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem:
Intel Corporation Dual Band Wireless-N 7260 Flags: bus master, fast
devsel, latency 0, IRQ 35 Memory at f7a00000 (64-bit, non-prefetchable)
[size=8K] Capabilities: [c8] Power Management version 3 Capabilities: [d0]
MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [40] Express
Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 0c-8b-fd-ff-ff-78-66-c1
Capabilities: [14c] Latency Tolerance Reporting Capabilities: [154] Vendor
Specific Information: ID=cafe Rev=1 Len=014 <?> Kernel driver in use:
iwlwifi Kernel modules: iwlwifi
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI
Express Gigabit Ethernet Controller (rev 0c)
Subsystem: ASUSTeK Computer Inc. Device 200f Flags: bus master, fast
devsel, latency 0, IRQ 10 I/O ports at d000 [size=256] Memory at f7900000
(64-bit, non-prefetchable) [size=4K] Memory at f2100000 (64-bit,
prefetchable) [size=16K] Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities:
[70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4
Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced
Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160]
Device Serial Number 24-20-18-44-68-4c-e0-00 Capabilities: [170] Latency
Tolerance Reporting Kernel modules: r8169
05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI
Express Card Reader (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader
Flags: bus master, fast devsel, latency 0, IRQ 33 Memory at f7800000
(32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management
version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced
Error Reporting Capabilities: [140] Device Serial Number
00-00-00-01-00-4c-e0-00 Capabilities: [150] Latency Tolerance Reporting
Capabilities: [158] L1 PM Substates Kernel driver in use: rtsx_pci Kernel
modules: rtsx_pci
sudo dmesg | grep “not found”:
[ 2.466502] at24 0-0050: supply vcc not found, using dummy regulator
[ 2.468041] at24 0-0052: supply vcc not found, using dummy regulator
sudo dmesg -l emerg,alert,crit,err,warn:
[ 0.155737] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.751165] ata5.00: supports DRM functions and may not be fully accessible
[ 0.755738] ata5.00: supports DRM functions and may not be fully accessible
[ 1.884423] acpi_call: loading out-of-tree module taints kernel.
[ 2.260475] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000184F (\GPIS) (20200925/utaddress-204)
[ 2.260481] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200925/utaddress-204)
[ 2.260490] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20200925/utaddress-204)
[ 2.260494] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20200925/utaddress-204)
[ 2.260497] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20200925/utaddress-204)
[ 2.260502] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20200925/utaddress-204)
[ 2.260505] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20200925/utaddress-204)
[ 2.260508] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20200925/utaddress-204)
[ 2.260512] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204)
[ 2.260516] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20200925/utaddress-204)
[ 2.260519] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20200925/utaddress-204)
[ 2.260522] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20200925/utaddress-204)
[ 2.260525] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204)
[ 2.260529] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.466502] at24 0-0050: supply vcc not found, using dummy regulator
[ 2.468041] at24 0-0052: supply vcc not found, using dummy regulator
[ 2.771365] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 3.223889] hid-generic 0003:1852:7921.0001: No inputs registered, leaving
[ 5.028823] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 5.175081] kauditd_printk_skb: 75 callbacks suppressed
[ 12.941497] kauditd_printk_skb: 41 callbacks suppressed
[ 24.976039] kauditd_printk_skb: 4 callbacks suppressed
[ 68.017019] kauditd_printk_skb: 1 callbacks suppressed
journalctl -xb -p 3:
-- Journal begins at Fri 2020-06-19 19:39:45 CEST, ends at Fri 2021-01-01 22:16:51 CET. --
sty 01 22:05:31 station kernel: hid-generic 0003:1852:7921.0001: No inputs registered, leaving
sty 01 22:05:33 station kernel: Bluetooth: hci0: unexpected event for opcode 0xfc2f
sty 01 22:05:40 station gdm-password][1325]: gkr-pam: unable to locate daemon control file
For now, I’m on 5.9.
Exactly, like I mentioned before. It feels as if every time the system needs to hit my SSD for some reason, it chugs for a second. Very uncomfortable to use.
Please install glances, sort by I/O and show whole output.
I/O didn’t show anything, but strangely it reported that glances was using around 12-15% cpu in 5.10, when it was only using around 2-3% in 5.9.
Aha! I set my cpu-governer policy to schedutil and that fixed the issue. It was set to a profile called powersave that wasn’t there before.
Indeed! My governor also switched from schedutil (which I had on 5.9) to powersave. So I switched it back and now everything works smoothly.
Excellent 
How did you change CPU governor? I know there is terminal command but wonder is there is any GUI setting I might have never stumbled upon.
https://aur.archlinux.org/packages/cpupower-gui/
But since 5.9 kernel, you can change it with
cpufreq.default_governor=governor
as kernel boot parameter, so I don’t see the use of a whole GUI just for that.
Hi I got the same problem , so I was able to set the CPU correctly with cpupower but how I can make this setting permanent ?
@Signalrunner where did you set that string ?
thanks
In your bootloader. I assume that would be Grub if you haven’t change it.
So that would be editing /etc/default/grub, add that parameter to existing GRUB_CMDLINE_LINUX_DEFAULT= line, saving and rebuilding config with sudo update-grub.
As explained here:
https://wiki.archlinux.org/index.php/Kernel_parameters#GRUB
But remember, it only works from 5.9 onwards, not in the current LTS which still is 5.4 for example.
thanks, that was easy yes I’m on 5.10
Is still on powersave at boot 
Probably something else is changing it again after entering the system and the “userland”. Maybe cpupower, or probably TLP? Disable or change config accordingly.