Headphones not recognized on startup

When starting with headphones connected they are not recognized, only the HDMI audio, if I disconnect and reconnect everything is ok. With windows I don’t have this problem.
I didn’t have this problem a while ago.

System:
  Kernel: 5.15.85-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
    root=UUID=3940cc0e-7530-499d-9b41-9a5e99eb5750 rw quiet apparmor=1
    security=apparmor udev.log_priority=3
  Desktop: KDE Plasma v: 5.26.4 tk: Qt v: 5.15.7 info: latte-dock
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop System: BESSTAR TECH product: DMAF5 v: N/A
    serial: <superuser required>
  Mobo: BESSTAR TECH model: DMAF5 serial: <superuser required>
    UEFI: American Megatrends v: 5.14 date: 07/27/2021
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 5 3550H with Radeon Vega Mobile Gfx bits: 64
    type: MT MCP arch: Zen/Zen+ note: check gen: 1 level: v3 note: check
    built: 2019 process: GF 12nm family: 0x17 (23) model-id: 0x18 (24)
    stepping: 1 microcode: 0x8108109
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
    desc: 1x4 MiB
  Speed (MHz): avg: 1357 high: 1913 min/max: 1400/2100 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1396 2: 1913
    3: 1226 4: 1285 5: 1243 6: 1338 7: 1231 8: 1229 bogomips: 33548
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl and seccomp
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
    disabled, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series]
    driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm
    built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 ports:
    active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 05:00.0 chip-ID: 1002:15d8
    class-ID: 0300 temp: 55.0 C
  Display: x11 server: X.Org v: 21.1.6 compositor: kwin_x11 driver: X:
    loaded: modesetting alternate: fbdev,vesa dri: radeonsi gpu: amdgpu
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.48x10.91")
    s-diag: 523mm (20.6")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: HP L2208w serial: <filter>
    built: 2008 res: 1680x1050 hz: 60 dpi: 90 gamma: 1.2
    size: 473x296mm (18.62x11.65") diag: 558mm (22") ratio: 16:10 modes:
    max: 1680x1050 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.1 renderer: AMD Radeon Vega 8 Graphics
    (raven LLVM 14.0.6 DRM 3.42 5.15.85-1-MANJARO) direct render: Yes
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 05:00.1
    chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor driver: snd_pci_acp3x
    v: kernel alternate: snd_rn_pci_acp3x,snd_pci_acp5x pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 05:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h/19h HD Audio vendor: Realtek
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 05:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound API: ALSA v: k5.15.85-1-MANJARO running: yes
  Sound Server-1: JACK v: 1.9.21 running: no
  Sound Server-2: PulseAudio v: 16.1 running: no
  Sound Server-3: PipeWire v: 0.3.63 running: yes
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlp2s0 state: down mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000
    bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-3: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000
    bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp4s0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-2:3
    chip-ID: 8087:0029 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: see --recommends
Drives:
  Local Storage: total: 700.51 GiB used: 243.85 GiB (34.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: OM8PDP3512B-A01
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: EDFK0S03 temp: 48.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT240BX500SSD1
    size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: R013 scheme: GPT
Partition:
  ID-1: / raw-size: 223.27 GiB size: 218.71 GiB (97.96%)
    used: 129.24 GiB (59.1%) fs: ext4 dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 292 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 55.1 C mobo: N/A gpu: amdgpu temp: 55.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 268 Uptime: 1h 37m wakeups: 8 Memory: 13.61 GiB
  used: 2.36 GiB (17.3%) Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: 1555
  pm: pacman pkgs: 1537 libs: 389 tools: pamac pm: flatpak pkgs: 0 pm: snap
  pkgs: 18 Shell: Zsh v: 5.9 default: Bash v: 5.1.16 running-in: yakuake
  inxi: 3.3.243
1 Like

Hi @NandoP, and welcome!

In order for us, or anyone for that matter, to be able to provide assistance, more information is necessary. To that end, please see:

Hope you manage!


:bangbang: Tip: :bangbang:

To provide terminal output, copy the text you wish to share, and paste it here, surrounded by three (3) backticks, a.k.a grave accents. Like this:

```
pasted text
```

Or three (3) tilde signs, like this:

~~~
pasted text
~~~

This will just cause it to be rendered like this:

Portaest sed
elementum
cursus nisl nisi
hendrerit ac quis
sit
adipiscing
tortor sit leo commodo.

Instead of like this:

Portaest sed elementum cursus nisl nisi hendrerit ac quis sit adipiscing tortor sit leo commodo.

Alternatively, paste the text you wish to format as terminal output, select all pasted text, and click the </> button on the taskbar. This will indent the whole pasted section with one TAB, causing it to render the same way as described above.

Thereby improving legibility and making it much easier for those trying to be of assistance.


:bangbang::bangbang: Additionally

If your language isn’t English, please prepend any and all terminal commands with LC_ALL=C. For example:

LC_ALL=C bluetoothctl

This will just cause the terminal output to be in English, making it easier to understand and debug.

Please edit your post accordingly.

OK modified

It was a KDE problem, I installed and logged in with Gnome and then went back to KDE and it fixed the problem.

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.