Can't find wireless network even in settings

Support Network
,
1

I have installed manjaro in my laptop as dual boot and i can use wifi in the windows os perfectly fine, but i can only use internet though usb tethering. Cant find why. And i have tested every article in this forum on this topic and can’t find a solution.
this is my system info

System:
  Kernel: 6.1.38-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
    root=UUID=9b8489ce-e6fe-4ec8-93ec-15b20a1386d6 rw quiet splash apparmor=1
    security=apparmor udev.log_priority=3
  Desktop: GNOME v: 44.3 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM v: 44.1
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: LENOVO product: 82RK v: IdeaPad 3 15IAU7
    serial: <superuser required> Chassis: type: 10 v: IdeaPad 3 15IAU7
    serial: <superuser required>
  Mobo: LENOVO model: LNVNB161216 v: SDK0T76486 WIN
    serial: <superuser required> UEFI: LENOVO v: JKCN31WW date: 07/21/2022
Battery:
  ID-1: BAT0 charge: 36.5 Wh (88.6%) condition: 41.2/45.0 Wh (91.5%)
    power: 22.0 W volts: 11.8 min: 11.1 model: Celxpert L20C3PF0 type: Li-poly
    serial: <filter> status: discharging cycles: 130
CPU:
  Info: model: 12th Gen Intel Core i5-1235U bits: 64 type: MST AMCP
    arch: Alder Lake level: v3 note: check built: 2021+
    process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154) stepping: 4
    microcode: 0x42A
  Topology: cpus: 1x cores: 10 mt: 2 tpc: 2 st: 8 threads: 12 smt: enabled
    cache: L1: 928 KiB desc: d-8x32 KiB, 2x48 KiB; i-2x32 KiB, 8x64 KiB
    L2: 6.5 MiB desc: 2x1.2 MiB, 2x2 MiB L3: 12 MiB desc: 1x12 MiB
  Speed (MHz): avg: 1106 high: 2500 min/max: 400/4400:3300 scaling:
    driver: intel_pstate governor: powersave cores: 1: 812 2: 2500 3: 551 4: 2500
    5: 708 6: 898 7: 536 8: 689 9: 2500 10: 542 11: 570 12: 477 bogomips: 59916
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Alder Lake-UP3 GT2 [UHD Graphics] vendor: Lenovo driver: i915
    v: kernel arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports:
    active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:4628
    class-ID: 0300
  Device-2: Chicony Integrated Camera driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-8:3 chip-ID: 04f2:b78e
    class-ID: fe01 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.2
    compositor: gnome-shell driver: gpu: i915 display-ID: 0
  Monitor-1: eDP-1 model: BOE Display 0x08d5 built: 2019 res: 1920x1080
    dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5")
    ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 23.0.4 renderer: Mesa Intel Graphics (ADL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Lenovo
    driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_tgl
    bus-ID: 00:1f.3 chip-ID: 8086:51c8 class-ID: 0403
  API: ALSA v: k6.1.38-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 0.3.74 status: off tools: pw-cli
  Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
    type: plugin tools: pacat,pactl
Network:
  Device-1: Realtek vendor: Lenovo driver: N/A pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:b852 class-ID: 0280
  IF-ID-1: enp0s20f0u2 state: unknown speed: -1 duplex: half mac: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:4 chip-ID: 0bda:4853
    class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: see --recommends
  Device-2: Samsung Galaxy series misc. (tethering mode) driver: rndis_host
    v: kernel type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2:6
    chip-ID: 04e8:6863 class-ID: 0a00 serial: <filter>
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Drives:
  Local Storage: total: 476.94 GiB used: 15.77 GiB (3.3%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW512GZL
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: C01C temp: 36.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 55.86 GiB size: 54.68 GiB (97.89%) used: 15.74 GiB (28.8%)
    fs: ext4 dev: /dev/nvme0n1p6 maj-min: 259:6
  ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%)
    used: 36.9 MiB (14.4%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 282 Uptime: 3m wakeups: 179 Memory: total: 8 GiB note: est.
  available: 7.49 GiB used: 2.34 GiB (31.3%) Init: systemd v: 253
  default: graphical tool: systemctl Compilers: gcc: 13.1.1 clang: 15.0.7
  Packages: pm: pacman pkgs: 1202 libs: 343 tools: gnome-software,pamac,yay
  pm: flatpak pkgs: 0 Shell: Zsh v: 5.9 running-in: gnome-terminal inxi: 3.3.28
2

Hi @Cabba_ken, and welcome!

If so, then you’d have known to please provide the following:

Please also note and heed: Forum Rules - Manjaro

Hope you manage!

:bangbang: Tip: :bangbang:

To provide terminal output, copy the text you wish to share, and paste it here, surrounded by three (3) backticks, a.k.a grave accents. Like this:

```
pasted text
```

Or three (3) tilde signs, like this:

~~~
pasted text
~~~

This will just cause it to be rendered like this:

Portaest sed
elementum
cursus nisl nisi
hendrerit ac quis
sit
adipiscing
tortor sit leo commodo.

Instead of like this:

Portaest sed elementum cursus nisl nisi hendrerit ac quis sit adipiscing tortor sit leo commodo.

Alternatively, paste the text you wish to format as terminal output, select all pasted text, and click the </> button on the taskbar. This will indent the whole pasted section with one TAB, causing it to render the same way as described above.

Thereby improving legibility and making it much easier for those trying to be of assistance.

:bangbang::bangbang: Additionally

If your language isn’t English, please prepend any and all terminal commands with LC_ALL=C. For example:

LC_ALL=C bluetoothctl

This will just cause the terminal output to be in English, making it easier to understand and debug.

Please edit your post accordingly.

1 Like
3

Tried this ?

4

I did that and this is what i still see in my network settings
https://paste.pics/d9c9046bdd5fd40470656979bc927f38
and i don’t see a wifi icon in my top bar too. It just says wired connection