Airpods pro low volume (applied fix but needs re-pairing)

Hello,

So I found this: Bluetooth_headset#Apple_AirPods_have_low_volume in the wiki (can’t include links)

to fix my airpods pro low volume probem.

The thing is that after turning off the laptop, I have to re-pair them in order to make it work again.

Is there a permanent solution for this?

Im using:

Operating System: Manjaro Linux
KDE Plasma Version: 5.24.6
KDE Frameworks Version: 5.96.0
Qt Version: 5.15.5
Kernel Version: 5.15.55-1-MANJARO (64-bit)
Graphics Platform: X11
Processors: 12 × Intel® Core™ i7-8750H CPU @ 2.20GHz
Memory: 31,2 GiB of RAM
Graphics Processor: NVIDIA GeForce GTX 1060/PCIe/SSE2

Thanks!

System:
  Kernel: 5.15.55-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
    root=UUID=033974d0-79d5-4040-b412-829d14155996 rw quiet apparmor=1
    security=apparmor udev.log_priority=3
  Desktop: KDE Plasma v: 5.24.6 tk: Qt v: 5.15.5 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: TIMI product: TM1801 v: Mi Gaming Laptop 15.6
    serial: <superuser required> Chassis: type: 10 v: Mi Gaming Laptop 15.6
    serial: <superuser required>
  Mobo: TIMI model: TM1801 serial: <superuser required> UEFI: TIMI
    v: XMGCF500P0302 date: 07/02/2018
Memory:
  RAM: total: 31.22 GiB used: 7.56 GiB (24.2%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Core i7-8750H bits: 64 type: MT MCP arch: Coffee Lake
    gen: core 8 built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158)
    stepping: 0xA (10) microcode: 0xF0
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
    L3: 9 MiB desc: 1x9 MiB
  Speed (MHz): avg: 900 min/max: 800/4100 scaling: driver: intel_pstate
    governor: powersave cores: 1: 900 2: 900 3: 900 4: 900 5: 900 6: 900 7: 900
    8: 900 9: 900 10: 900 11: 900 12: 900 bogomips: 52815
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt
    cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts
    epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr
    ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid
    invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr
    nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln
    pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep smap
    smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
    tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave
    xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
    mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: conditional, RSB filling
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Xiaomi
    driver: i915 v: kernel arch: Gen9.5 process: Intel 14nm built: 2016-20
    ports: active: eDP-1 empty: DP-1 bus-ID: 00:02.0 chip-ID: 8086:3e9b
    class-ID: 0300
  Device-2: NVIDIA GP106M [GeForce GTX 1060 Mobile] vendor: Xiaomi
    driver: nvidia v: 515.57 alternate: nouveau,nvidia_drm non-free: 515.xx+
    status: current (as of 2022-06) arch: Pascal process: TSMC 16nm
    built: 2016-21 pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.0
    chip-ID: 10de:1c20 class-ID: 0300
  Device-3: Chicony XiaoMi USB 2.0 Webcam type: USB driver: uvcvideo
    bus-ID: 1-6:3 chip-ID: 04f2:b59a class-ID: 0e02
  Display: x11 server: X.Org v: 21.1.4 with: Xwayland v: 22.1.3
    compositor: kwin_x11 driver: X: loaded: nvidia alternate: intel gpu: i915
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-dpi: 108 s-size: 602x342mm (23.70x13.46")
    s-diag: 692mm (27.26")
  Monitor-1: eDP-1 mapped: HDMI-0 model: Najing CEC Panda LM156LF9L01
    built: 2017 res: 2560x1440 hz: 144 dpi: 108 gamma: 1.2
    size: 600x340mm (23.62x13.39") diag: 395mm (15.5") ratio: 16:9
    modes: 1920x1080
  OpenGL: renderer: NVIDIA GeForce GTX 1060/PCIe/SSE2 v: 4.6.0 NVIDIA 515.57
    direct render: Yes
Audio:
  Device-1: Intel Cannon Lake PCH cAVS vendor: Xiaomi driver: snd_hda_intel
    v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:a348 class-ID: 0403
  Device-2: NVIDIA GP106 High Definition Audio vendor: Xiaomi
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 01:00.1 chip-ID: 10de:10f1 class-ID: 0403
  Sound Server-1: ALSA v: k5.15.55-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.21 running: no
  Sound Server-3: PulseAudio v: 16.1 running: yes
  Sound Server-4: PipeWire v: 0.3.56 running: yes
Network:
  Device-1: Intel Cannon Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280
  IF: wlp0s20f3 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Xiaomi driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
    port: 3000 bus-ID: 07:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp7s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB
    driver: btusb v: 0.8 bus-ID: 1-14:5 chip-ID: 8087:0aaa class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.14 TiB used: 114.89 GiB (9.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: MZVLB256HAHQ-00000 size: 238.47 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: EXD7101Q temp: 51.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM048-2E7172
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    type: HDD rpm: 5400 serial: <filter> rev: SDM1 scheme: MBR
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.88 GiB size: 116.45 GiB (97.96%)
    used: 36.62 GiB (31.4%) fs: ext4 dev: /dev/nvme0n1p5 maj-min: 259:5
    label: N/A uuid: 033974d0-79d5-4040-b412-829d14155996
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 27.3 MiB (28.4%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
    label: N/A uuid: E21B-AF67
  ID-3: /run/media/jfght/Extra HDD raw-size: 931.51 GiB
    size: 931.51 GiB (100.00%) used: 78.25 GiB (8.4%) fs: ntfs dev: /dev/sda1
    maj-min: 8:1 label: Extra HDD uuid: 301E19D81BB9B526
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 118.88 GiB fs: ntfs label: N/A
    uuid: 78201CE4201CAAE0
  ID-3: /dev/nvme0n1p4 maj-min: 259:4 size: 617 MiB fs: ntfs label: N/A
    uuid: 169CAFD59CAFADA5
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-4:2 info: Logitech G502 Mouse type: Mouse,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 300mA chip-ID: 046d:c07d class-ID: 0300 serial: <filter>
  Device-2: 1-6:3 info: Chicony XiaoMi USB 2.0 Webcam type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 04f2:b59a class-ID: 0e02
  Device-3: 1-10:4 info: Integrated Express ITE Device(8910) type: Keyboard
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s
    power: 100mA chip-ID: 048d:8910 class-ID: 0301
  Device-4: 1-14:5 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP)
    type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 100mA chip-ID: 8087:0aaa class-ID: e001
  Hub-2: 2-0:1 info: Super-speed hub ports: 8 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 63.0 C pch: 69.0 C mobo: N/A gpu: nvidia
    temp: 63 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 372 Uptime: 1h 56m wakeups: 1 Init: systemd v: 251
  default: graphical tool: systemctl Compilers: gcc: 12.1.0 clang: 14.0.6
  Packages: 1269 pacman: 1248 lib: 332 flatpak: 0 snap: 21 Shell: Zsh v: 5.9
  default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.19

Hi @chusrubi2, and welcome!

In order for us, or anyone for that matter, to be able to provide assistance, more information is necessary. To that end, please see:

Hope you manage!


Tip:

To provide terminal output, copy the text you wish to share, and paste it here, surrounded by three (3) backticks, a.k.a grave accents. Like this:

```

pasted text

```

This will just cause it to be rendered like this:

Portaest sed
elementum
cursus nisl nisi
hendrerit ac quis
sit
adipiscing
tortor sit leo commodo.

Instead of like this:

Portaest sed elementum cursus nisl nisi hendrerit ac quis sit adipiscing tortor sit leo commodo.

Thereby improving legibility and making it much easier for those trying to be of assistance.

Please edit your post accordingly.

Hello,

Once you made the modification did you also follow this part from the wiki prior to restart your system?

1 Like

Yup, I followed instructions as they are. I will try again tho.

I just restarted and went well.

Will close and reopen in case of the same problem raising again.

Thanks!

PS: How can I close the thread?

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.