Hello community, today I just received a wireless mouse, I have put the batteries at 100%, connect the bluetooth adapter to the PC and I can’t get the mouse to work, it doesn’t turn on, it doesn’t do anything, check that the mouse button is in on but still does nothing, do I need a driver? when I go to the bluetooth option in manjaro it tells me (no bluetooth adapters found)
Welcome to the forum! 
Then that’s your real issue. The BlueTooth mouse not working is symptom.
Please post your system info as outlined here:
Please also see:
System:
Kernel: 5.15.65-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=36419e1f-4002-4747-8ac0-97794a302f92 rw quiet
udev.log_priority=3
Desktop: KDE Plasma v: 5.25.5 tk: Qt v: 5.15.5 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ECS model: H61H2-CM v: 1.0 serial: <superuser required>
BIOS: American Megatrends v: 4.6.5 date: 02/28/2013
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 7.73 GiB used: 2.74 GiB (35.5%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: Intel Core i5-2400 bits: 64 type: MCP arch: Sandy Bridge
gen: core 2 level: v2 built: 2010-12 process: Intel 32nm family: 6
model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB
desc: 1x6 MiB
Speed (MHz): avg: 1596 min/max: 1600/3400 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 1596 2: 1596 3: 1596 4: 1596 bogomips: 24753
Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept est
flexpriority flush_l1d fpu fxsr ht ibpb ibrs ida lahf_lm lm mca mce
md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid
pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts rdtscp rep_good
sep smx ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
tsc tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt xtopology
xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Oland [Radeon HD 8570 / R5 430 OEM R7 240/340 Radeon 520 OEM]
vendor: Dell driver: radeon v: kernel alternate: amdgpu arch: GCN-1
code: Southern Islands process: TSMC 28nm built: 2011-20 pcie: gen: 2
speed: 5 GT/s lanes: 8 link-max: gen: 3 speed: 8 GT/s ports:
active: DVI-I-1 empty: DP-1 bus-ID: 01:00.0 chip-ID: 1002:6611
class-ID: 0300
Device-2: EC2U200 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-1.4:5
chip-ID: cce3:3884 class-ID: 0102
Display: x11 server: X.Org v: 21.1.4 compositor: kwin_x11 driver: X:
loaded: radeon unloaded: modesetting alternate: fbdev,vesa gpu: radeon
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37")
s-diag: 449mm (17.69")
Monitor-1: DVI-I-1 mapped: DVI-0 res: 1440x900 hz: 60 size: N/A modes:
max: 1024x768 min: 640x480
OpenGL: renderer: AMD OLAND (LLVM 14.0.6 DRM 2.50 5.15.65-1-MANJARO) v: 4.5
Mesa 22.1.7 direct render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: Elite Systems driver: snd_hda_intel bus-ID: 1-1.4:5 v: kernel
bus-ID: 00:1b.0 chip-ID: cce3:3884 chip-ID: 8086:1c20 class-ID: 0102
class-ID: 0403
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000
Series] vendor: Dell driver: snd_hda_intel v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 8 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1
chip-ID: 1002:aab0 class-ID: 0403
Device-3: EC2U200 type: USB driver: snd-usb-audio,uvcvideo
Sound Server-1: ALSA v: k5.15.65-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.1 running: yes
Sound Server-4: PipeWire v: 0.3.57 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Elite Systems driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: d000 bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp5s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 577.55 GiB used: 64.6 GiB (11.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Patriot model: Burst Elite 120GB
size: 111.79 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
type: SSD serial: <filter> rev: 1A0 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD5000AAKX-221CA1 size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1H17
scheme: MBR
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 111.79 GiB size: 109.47 GiB (97.93%) used: 24.57 GiB
(22.4%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A
uuid: 36419e1f-4002-4747-8ac0-97794a302f92
ID-2: /home/<filter>/pCloudDrive raw-size: N/A size: 7 GiB used: 188.7 MiB
(2.6%) fs: fuse source: ERR-102
ID-3: /mnt/HDD_Linux raw-size: 465.76 GiB size: 457.38 GiB (98.20%)
used: 39.85 GiB (8.7%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: N/A
uuid: b36560c9-67c3-4fdf-b801-05052cb8f49f
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:0024 class-ID: 0900
Device-1: 1-1.1:4 info: [Maxxter] Optical Gaming Mouse [Xtrem]
type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s power: 100mA chip-ID: 18f8:0f97 class-ID: 0301
Device-2: 1-1.2:3 info: China Resource Semico Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s
power: 98mA chip-ID: 1a2c:0021 class-ID: 0300
Device-3: 1-1.4:5 info: EC2U200 type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 200mA chip-ID: cce3:3884 class-ID: 0102
Hub-3: 2-0:1 info: Full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:0024 class-ID: 0900
Hub-5: 2-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 1a40:0101 class-ID: 0900
Device-1: 2-1.3.2:4 info: Genesys Logic SD/MMC card reader
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s power: 500mA chip-ID: 05e3:0722 class-ID: 0806
serial: <filter>
Device-2: 2-1.3.3:6 info: YICHIP Wireless Device type: Keyboard,Mouse
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 3151:3020 class-ID: 0301
Sensors:
System Temperatures: cpu: 40.0 C mobo: N/A gpu: radeon temp: 37.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 224 Uptime: 1h 1m wakeups: 0 Init: systemd v: 251
default: graphical tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6
Packages: 1436 pm: pacman pkgs: 1426 libs: 401 tools: pamac pm: flatpak
pkgs: 10 Shell: Zsh v: 5.9 default: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.21
What wireless mouse? Brand and model?
It appears you’re using a desktop PC. How does it have BlueTooth support? A USB adapter?
Please post the output of the following command while the mouse (and if applicable, the BlueTooth adapter) is connected:
lsusb
The box doesn’t really say much about the brand, the most information I can get is that it says 2.4Ghz Wireless OPtical Mouse, as for the command here it is
Bus 002 Device 006: ID 3151:3020 YICHIP Wireless Device
Bus 002 Device 004: ID 05e3:0722 Genesys Logic, Inc. SD/MMC card reader
Bus 002 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID cce3:3884 EC2U200 EC2U200
Bus 001 Device 003: ID 1a2c:0021 China Resource Semico Co., Ltd Keyboard
Bus 001 Device 004: ID 18f8:0f97 [Maxxter] Optical Gaming Mouse [Xtrem]
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
what I can notice is that it detects the usb adapter because it shows it here
Bus 002 Device 006: ID 3151:3020 YICHIP Wireless Device
[quote=“UrsuloCD, post:6, topic:123303”]Bus 001 Device 004: ID 18f8:0f97 [Maxxter] Optical Gaming Mouse [Xtrem]
[/quote]
It seems it works on Arch and Garuda: [Maxxter] Optical Gaming Mouse [Xtrem]
However, Maxxter mouse support · Issue #615 · libratbag/libratbag · GitHublibratbag (piper backend) does not support it:
Tip: Buy hardware from reputable brands, not no-name generic junk.
EDIT: Wrong device
no that is the mouse i am using by usb cable
Bus 001 Device 004: ID 18f8:0f97 [Maxxter] Optical Gaming Mouse [Xtrem]