Kapu
27 October 2021 08:20
1
Hello, my webcam no longer works in Manjaro. I couldn’t tell which update caused it. It is a logitech webcam (Logitech C270 HD Webcam, 720p Video with Noise Reducing Mic ).dmesg | tail, I get this result, but I don’t know how to interpret it :
[ 4545.735246] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080c)
[ 4545.784645] input: UVC Camera (046d:080c) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input19
[ 4551.868905] usb 1-2: reset high-speed USB device number 13 using xhci_hcd
[ 4556.047246] audit: type=1334 audit(1635322113.102:352): prog-id=70 op=LOAD
[ 4556.137704] audit: type=1130 audit(1635322113.192:353): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=fprintd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4560.622883] audit: type=1100 audit(1635322117.678:354): pid=62020 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:authentication grantors=? acct="kapu" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=failed'
[ 4568.879676] audit: type=1100 audit(1635322125.935:355): pid=62020 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:authentication grantors=pam_unix acct="kapu" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4568.881026] audit: type=1101 audit(1635322125.935:356): pid=62020 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="kapu" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4568.882239] audit: type=1110 audit(1635322125.938:357): pid=62020 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 4568.885131] audit: type=1105 audit(1635322125.938:358): pid=62020 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
Edit : my kernel is 5.10.70-1 LTS.
The light on my webcam lights up.
Thank you for your help !
Hey, I have the same problem, with the same Logitech webcam.
The strange thing is, that the webcam is also not showing any video anymore on a Windows pc.
Kapu
3 November 2021 08:40
4
Ok, thank you for the links.
Here are my specs :
System:
Kernel: 5.10.70-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=090bee44-8c2b-46ea-a8c7-3816bf6b2b41 ro quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME 40.5 tk: GTK 3.24.30 wm: gnome-shell dm: GDM 40.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Apple product: MacBookAir7,2 v: 1.0 serial: <filter>
Chassis: type: 9 v: Mac-937CB26E2E02BB01 serial: <filter>
Mobo: Apple model: Mac-937CB26E2E02BB01 v: MacBookAir7,2 serial: <filter>
UEFI: Apple v: 193.0.0.0.0 date: 02/05/2020
Battery:
ID-1: BAT0 charge: 42.9 Wh (87.2%) condition: 49.2/54.3 Wh (90.5%)
volts: 8.1 min: 7.6 model: DP bq20z451 type: Li-ion serial: N/A
status: Discharging cycles: 949
Memory:
RAM: total: 7.67 GiB used: 4.27 GiB (55.6%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Dual Core model: Intel Core i7-5650U bits: 64 type: MT MCP
arch: Broadwell family: 6 model-id: 3D (61) stepping: 4 microcode: 2F cache:
L2: 4 MiB bogomips: 17604
Speed: 2201 MHz min/max: 500/3200 MHz Core speeds (MHz): 1: 2201 2: 2200
3: 2203 4: 2198
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon avx
avx2 bmi1 bmi2 bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de
ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d
fma fpu fsgsbase fxsr hle ht ibpb ibrs ida intel_pt invpcid invpcid_single
lahf_lm lm mca mce md_clear mmx monitor movbe msr mtrr nonstop_tsc nopl nx
pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36
pti pts rdrand rdseed rdtscp rep_good rtm sdbg sep smap smep smx ss ssbd sse
sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT vulnerable
Graphics:
Device-1: Intel HD Graphics 6000 vendor: Apple driver: i915 v: kernel
bus-ID: 00:02.0 chip-ID: 8086:1626 class-ID: 0300
Device-2: Logitech type: USB driver: uvcvideo bus-ID: 1-2:7
chip-ID: 046d:080c class-ID: 0e02
Display: wayland server: X.Org 1.21.1.2 compositor: gnome-shell driver:
loaded: intel unloaded: modesetting alternate: fbdev,vesa display-ID: :0
screens: 1
Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.0x9.4")
s-diag: 449mm (17.7")
Monitor-1: XWAYLAND0 res: 1440x900 hz: 60 dpi: 126
size: 290x180mm (11.4x7.1") diag: 341mm (13.4")
OpenGL: renderer: Mesa Intel HD Graphics 6000 (BDW GT3) v: 4.6 Mesa 21.2.3
direct render: Yes
Audio:
Device-1: Intel Broadwell-U Audio vendor: Apple driver: snd_hda_intel
v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c class-ID: 0403
Device-2: Intel Wildcat Point-LP High Definition Audio driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9ca0 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A bus-ID: 02:00.0
chip-ID: 14e4:1570 class-ID: 0480
Sound Server-1: ALSA v: k5.10.70-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.38 running: yes
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple
driver: wl v: kernel modules: bcma bus-ID: 03:00.0 chip-ID: 14e4:43a0
class-ID: 0280
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: wg-mullvad state: unknown speed: N/A duplex: N/A mac: N/A
IP v4: <filter> scope: global
WAN IP: <filter>
Bluetooth:
Device-1: Apple Bluetooth USB Host Controller type: USB driver: btusb v: 0.8
bus-ID: 1-3.3:6 chip-ID: 05ac:828f class-ID: fe01
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 465.92 GiB used: 252.01 GiB (54.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD SM0512G
size: 465.92 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 3A0Q scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 412.48 GiB size: 405 GiB (98.19%) used: 251.98 GiB (62.2%)
fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: 090bee44-8c2b-46ea-a8c7-3816bf6b2b41
ID-2: /boot/efi raw-size: 200 MiB size: 196.9 MiB (98.45%)
used: 27.5 MiB (14.0%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: EFI
uuid: 67E3-17ED
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 16 GiB used: 256 KiB (0.0%) priority: -2
dev: /dev/sda4 maj-min: 8:4 label: N/A
uuid: 9816dde6-827b-4440-9a96-e28c2aba1c9f
Unmounted:
ID-1: /dev/sda2 maj-min: 8:2 size: 37.25 GiB fs: apfs label: N/A
uuid: ccb065b9-ebbd-4c50-a2c6-cd493edfaba3
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 11 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-2:7 info: Logitech type: Video driver: uvcvideo interfaces: 2
rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 046d:080c class-ID: 0e02
Hub-2: 1-3:2
info: Broadcom BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) ports: 3
rev: 2.0 speed: 12 Mb/s power: 94mA chip-ID: 0a5c:4500 class-ID: 0900
Device-1: 1-3.3:6 info: Apple Bluetooth USB Host Controller type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip-ID: 05ac:828f
class-ID: fe01
Device-2: 1-5:3 info: Apple Apple Internal Keyboard / Trackpad
type: HID,Keyboard,Mouse driver: apple,bcm5974,usbhid interfaces: 3 rev: 2.0
speed: 12 Mb/s power: 500mA chip-ID: 05ac:0291 class-ID: 0301
serial: <filter>
Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 256 Uptime: 2d 17h 46m wakeups: 4 Init: systemd v: 249
tool: systemctl Compilers: gcc: 11.1.0 Packages: 1764 apt: 0 pacman: 1748
lib: 449 flatpak: 9 snap: 7 Shell: Zsh v: 5.8 running-in: gnome-terminal
inxi: 3.3.08
Here is what my dsmeg|tail (with sudo) gives :
[ 8271.394132] USB Video Class driver (1.1.1)
[ 8279.655216] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:fb:00:04:74:23:0c:de:08:00 SRC=192.168.1.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=44037 PROTO=2
[ 8310.433913] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:08:87:c6:41:00:00:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 8318.080018] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:fb:00:04:74:23:0c:de:08:00 SRC=192.168.1.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=44040 PROTO=2
[ 8342.739112] audit: type=1334 audit(1635928355.939:278): prog-id=46 op=LOAD
[ 8342.859658] audit: type=1130 audit(1635928356.059:279): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=fprintd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8348.626442] audit: type=1100 audit(1635928361.826:280): pid=18043 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:authentication grantors=pam_unix acct="kapu" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8348.629818] audit: type=1101 audit(1635928361.829:281): pid=18043 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="kapu" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8348.630103] audit: type=1110 audit(1635928361.829:282): pid=18043 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:setcred grantors=pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8348.633750] audit: type=1105 audit(1635928361.836:283): pid=18043 uid=1000 auid=1000 ses=4 subj==unconfined msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
Here is my consol when I launch Cheese through it :
(cheese:18842): cheese-WARNING **: 09:35:44.124: Internal data stream error.: ../gstreamer/libs/gst/base/gstbasesrc.c(3127): gst_base_src_loop (): /GstCameraBin:camerabin/GstWrapperCameraBinSrc:camera_source/GstBin:bin35/GstPipeWireSrc:pipewiresrc1:
streaming stopped, reason not-negotiated (-4)
Could it be from a pipewire update ? I use Wayland with Gnome.
[edit] : I didn’t try yet to downgrade my kernel. If it comes from Wayland, wouldn’t be a better (safer) use just to switch to X ? (if the problem really comes from it).
Kapu
27 November 2021 09:59
5
Hi, so I tried to launch Gnome with Xorg, but it didn’t change my problem.
inxi --admin --verbosity=7 --filter --width
gives :
System:
Kernel: 5.4.159-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64
root=UUID=090bee44-8c2b-46ea-a8c7-3816bf6b2b41 ro quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME 41.1 tk: GTK 3.24.30 wm: gnome-shell dm: GDM 41.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Apple product: MacBookAir7,2 v: 1.0
serial: <superuser required> Chassis: type: 9 v: Mac-937CB26E2E02BB01
serial: <superuser required>
Mobo: Apple model: Mac-937CB26E2E02BB01 v: MacBookAir7,2
serial: <superuser required> UEFI: Apple v: 193.0.0.0.0 date: 02/05/2020
Battery:
ID-1: BAT0 charge: 32.7 Wh (72.0%) condition: 45.4/54.3 Wh (83.5%)
volts: 7.8 min: 7.6 model: DP bq20z451 type: Li-ion serial: N/A
status: Discharging cycles: 978
Memory:
RAM: total: 7.68 GiB used: 3.4 GiB (44.2%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Dual Core model: Intel Core i7-5650U bits: 64 type: MT MCP
arch: Broadwell family: 6 model-id: 3D (61) stepping: 4 microcode: 2F cache:
L1: 128 KiB L2: 512 KiB L3: 4 MiB bogomips: 17604
Speed: 1267 MHz min/max: 500/3200 MHz Core speeds (MHz): 1: 1253 2: 868
3: 812 4: 818
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon avx
avx2 bmi1 bmi2 bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de
ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d
fma fpu fsgsbase fxsr hle ht ibpb ibrs ida intel_pt invpcid invpcid_single
lahf_lm lm mca mce md_clear mmx monitor movbe msr mtrr nonstop_tsc nopl nx
pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36
pti pts rdrand rdseed rdtscp rep_good rtm sdbg sep smap smep smx ss ssbd sse
sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT vulnerable
Graphics:
Device-1: Intel HD Graphics 6000 vendor: Apple driver: i915 v: kernel
bus-ID: 00:02.0 chip-ID: 8086:1626 class-ID: 0300
Display: wayland server: X.Org 1.21.1.3 compositor: gnome-shell driver:
loaded: modesetting alternate: fbdev,vesa display-ID: :0 screens: 1
Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.0x9.4")
s-diag: 449mm (17.7")
Monitor-1: XWAYLAND0 res: 1440x900 hz: 60 dpi: 126
size: 290x180mm (11.4x7.1") diag: 341mm (13.4")
OpenGL: renderer: Mesa Intel HD Graphics 6000 (BDW GT3) v: 4.6 Mesa 21.2.5
direct render: Yes
Audio:
Device-1: Intel Broadwell-U Audio vendor: Apple driver: snd_hda_intel
v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c class-ID: 0403
Device-2: Intel Wildcat Point-LP High Definition Audio driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9ca0 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A bus-ID: 02:00.0
chip-ID: 14e4:1570 class-ID: 0480
Sound Server-1: ALSA v: k5.4.159-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.40 running: yes
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple
driver: wl v: kernel modules: bcma bus-ID: 03:00.0 chip-ID: 14e4:43a0
class-ID: 0280
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
IP v4: <filter> scope: global
IP v6: <filter> virtual: stable-privacy scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Apple Bluetooth USB Host Controller type: USB driver: btusb v: 0.8
bus-ID: 1-3.3:6 chip-ID: 05ac:828f class-ID: fe01
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 465.92 GiB used: 253.11 GiB (54.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD SM0512G
size: 465.92 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 3A0Q scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 412.48 GiB size: 405 GiB (98.19%) used: 253.08 GiB (62.5%)
fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: 090bee44-8c2b-46ea-a8c7-3816bf6b2b41
ID-2: /boot/efi raw-size: 200 MiB size: 196.9 MiB (98.45%)
used: 27.5 MiB (14.0%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: EFI
uuid: 67E3-17ED
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda4 maj-min: 8:4 label: N/A
uuid: 9816dde6-827b-4440-9a96-e28c2aba1c9f
Unmounted:
ID-1: /dev/sda2 maj-min: 8:2 size: 37.25 GiB fs: apfs label: N/A
uuid: ccb065b9-ebbd-4c50-a2c6-cd493edfaba3
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 11 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-3:2
info: Broadcom BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) ports: 3
rev: 2.0 speed: 12 Mb/s power: 94mA chip-ID: 0a5c:4500 class-ID: 0900
Device-1: 1-3.3:6 info: Apple Bluetooth USB Host Controller type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip-ID: 05ac:828f
class-ID: fe01
Device-2: 1-5:3 info: Apple Apple Internal Keyboard / Trackpad
type: HID,Keyboard,Mouse driver: apple,bcm5974,usbhid interfaces: 3 rev: 2.0
speed: 12 Mb/s power: 500mA chip-ID: 05ac:0291 class-ID: 0301
serial: <filter>
Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Device-1: 2-3:2 info: Apple Internal Memory Card Reader type: Mass Storage
driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA
chip-ID: 05ac:8406 class-ID: 0806 serial: <filter>
Sensors:
System Temperatures: cpu: 61.0 C pch: 55.5 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 271 Uptime: 3m wakeups: 2 Init: systemd v: 249 tool: systemctl
Compilers: gcc: 11.1.0 Packages: 1774 apt: 0 pacman: 1758 lib: 452
flatpak: 9 snap: 7 Shell: Zsh v: 5.8 running-in: gnome-terminal inxi: 3.3.09
Where could I find more help about hits ? Visioconference are really needed nowadays ^^
EDIT :
I re installed the 5.10 LTS kernel, nothing changed.
Something is odd from the beginning, the LED on my webcam is always on, as soon as I plug the webcam, whereas before this problem, the LED was on only when the visio started.
Kapu
4 December 2021 01:05
6
Anyone ? How could I get more help about that ? Is there any chance that I could solve it by buying an other webcam ? (I can’t afford me to buy a new webcam that might not work)
Kapu
15 December 2021 10:19
7
Trying an UP for this post ^^
Well, dude.
According to this page :
If my search wasn’t right, please excuse me and provide the correct one, someone who knows better.
Your info also states that it is using the logitec driver already:
So it seems everything is in order. So all I can recommend you do is use it/try to set it up. For than you can use solaar . And it’s in the community repository:
$ pamac search solaar
[...]
solaar 1.1.0-1 community
Linux device manager for a wide range of Logitech devices
So it can be easily installed with pamac
pamac install solaar
I have no idea if this’ll work or not. And I also have no experience with webcams, or any camera for that matter. So the info given here is purely theoretical and it’s quite possible that it’s wrong. And that is why I didn’t answer earlier.
P.S.: As much as I understand why you did it, bumping a topic is against the rules.
Edit:
Just saw this,
sudo systemctl disable --now pipewire
I also don’t know if this’ll work, as in addition to not having any experience with any camera, I also don’t have any experience with sound.
Kapu
2 February 2022 08:47
9
Ok, thank you, I’ll try it later. I borrowed an other logitech webcam from a friend logitech and it worked with no problem. It’s not the same model. It’s very confusing for me.
It’s 2 different models, so 2 different drivers required. I’m guessing your friends is newer?
and it might, I have no idea. Try disabling pipewire: