Trying to modify /etc/fstab getting save error

[MAYBL8]

It says I do not have write access to this file.

[andreas85]

Are you root ?

Increase your chances of solving your issue:

[HowTo] Request support

Difficulty: ★☆☆☆☆ Strong of its many members, the Manjaro support forum can provide you help whenever you have an issue with your Manjaro installation. But in order to work efficiently, we shall also ask you to follow three major points. Provide context Simply signaling an issue is rarely enough to understand how it occurred. It is thus important to provide details on how it happened: Detail prior actions leading to the issue. List solutions and guides you already tried, with links when…

Provide Information:

[HowTo] Provide System Information

This tutorial is superseded by this one. Remember all Tutorials are wiki posts that can be edited by TL2 (Trust Level 2) members and above. Welcome to Manjaro! To allow all of us helpful people on this forum TO HELP YOU, we need some basic information about your system. This probably means you described the symptoms of your problem, but now we need some more information to know where the origin of your issue is exactly. Someone else probably linked you to…

Filesystem, Permissions:

[Tutorial] Understanding and working with UNIX filesystems and permissions

Difficulty: ★★★☆☆ Note: This post is meant as a tutorial. Please do not post on this thread regarding any problems you’re having with permissions, but start a new thread instead. Thank you. PREAMBLE: THE HISTORICAL BACKGROUND If you are new to the world of GNU/Linux ─ and especially if you come from the Microsoft Windows ecosystem ─ then you will undoubtedly have already noticed that GNU/Linux handles permissions and storage volumes quite differently from what you might be used to …

[MAYBL8]

What more information is needed?

[nikgnomic]

Try using this command to edit the file with root privileges

sudo nano /etc/fstab

[ishaan2479]

Open the file with sudo example: sudo nano /etc/fstab

[MAYBL8]

That worked but I wanted to use kate opening it with dolphin.

[andreas85]

This file is essential for your system. So therefore it is only allowed to modify it as root or via sudo, because you could make your system easily unbootable this way.

[ishaan2479]

@MAYBL8

That worked but I wanted to use kate opening it with dolphin.

If you need to edit a system file as root from KDE Plasma you can do it like this.

1. Find the file via Dolphin.
2. Open the file with Kate.
3. Make the edits you want.
4. Then save the file. Kate will then ask you for your sudo password. Type that in and it saves your file.

Also see this:

https://wiki.archlinux.org/title/Running_GUI_applications_as_root

[linux-aarhus]

Be very careful with your fstab

• [root tip] Use systemd to mount ANY device

[MAYBL8]

This is where I get the error message when I try to save after putting in the password.

[MAYBL8]

@ishaan2479

If you need to edit a system file as root from KDE Plasma you can do it like this.

1. Find the file via Dolphin.
2. Open the file with Kate.
3. Make the edits you want.
4. Then save the file. Kate will then ask you for your sudo password. Type that in and it saves your file.

This is where I get the error message after putting in the password.

[cscs]

Not true. Kate is fully polkit ready and should be able to simply save a file and ask for credentials.

@MAYBL8

This is where I get the error message after putting in the password.

It sounds like you are being prompted … but your password doesnt work or something.

So … are you using the right password?
(do you have different ones for root and user?)
Does your user have the correct privileges?

[MAYBL8]

I’m sorry I was wrong. It doesn’t even let me enter the password before it displays the error.

[cscs]

…
So you open the file in kate, edit, save, and then just an error?

As above and below, this sounds like your user does not have the proper rights.

Also, what does your inxi look like?

inxi -Fazy

[Strit]

In that case you are not a user with sudo access?

[MAYBL8]

System:
  Kernel: 5.16.2-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.16-x86_64
    root=UUID=45ca132d-4a37-4dc3-afa0-be2e80d6a4a2 rw quiet apparmor=1
    security=apparmor udev.log_priority=3
  Desktop: KDE Plasma 5.24.80 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11
    vt: 1 dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Convertible System: HP product: HP Spectre x360 Convertible 15-df1xxx
    v: N/A serial: <superuser required> Chassis: type: 31
    serial: <superuser required>
  Mobo: HP model: 863F v: 54.24 serial: <superuser required> UEFI: AMI
    v: F.26 date: 07/09/2021
Battery:
  ID-1: BAT0 charge: 53.1 Wh (79.0%) condition: 67.2/67.2 Wh (100.0%)
    volts: 12.3 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
    status: N/A cycles: 169
  Device-1: hid-0018:04F3:2992.0001-battery model: ELAN2514:00 04F3:2992
    serial: N/A charge: N/A status: N/A
CPU:
  Info: model: Intel Core i7-10510U bits: 64 type: MT MCP
    arch: Comet/Whiskey Lake note: check family: 6 model-id: 0x8E (142)
    stepping: 0xC (12) microcode: 0xEA
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 800 min/max: 400/4900 scaling: driver: intel_pstate
    governor: powersave cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800
    8: 800 bogomips: 36812
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
  Type: srbds mitigation: TSX disabled
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel CometLake-U GT2 [UHD Graphics] vendor: Hewlett-Packard
    driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:9b41 class-ID: 0300
  Device-2: NVIDIA GP108M [GeForce MX250] vendor: Hewlett-Packard
    driver: nvidia v: 495.46 alternate: nouveau,nvidia_drm bus-ID: 3b:00.0
    chip-ID: 10de:1d13 class-ID: 0302
  Device-3: Chicony HP Wide Vision FHD Camera type: USB driver: uvcvideo
    bus-ID: 1-5:2 chip-ID: 04f2:b67b class-ID: 0e02 serial: <filter>
  Display: x11 server: X.org 1.21.1.3 compositor: kwin_x11 driver:
    loaded: modesetting,nvidia unloaded: nouveau alternate: fbdev,nv,vesa
    resolution: <missing: xdpyinfo>
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: Intel Comet Lake PCH-LP cAVS vendor: Hewlett-Packard
    driver: sof-audio-pci-intel-cnl
    alternate: snd_hda_intel,snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:02c8 class-ID: 0401
  Sound Server-1: ALSA v: k5.16.2-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.43 running: yes
Network:
  Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:02f0 class-ID: 0280
  IF: wlp0s20f3 state: up mac: <filter>
Drives:
  Local Storage: total: 931.51 GiB used: 128.45 GiB (13.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 39.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 239 GiB size: 235 GiB (98.33%) used: 59.43 GiB (25.3%)
    fs: ext4 dev: /dev/nvme0n1p11 maj-min: 259:11
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 66.7 MiB (69.5%) fs: vfat dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 48.0 C pch: 46.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 259 Uptime: 50m wakeups: 778 Memory: 15.26 GiB
  used: 2.58 GiB (16.9%) Init: systemd v: 250 tool: systemctl Compilers:
  gcc: 11.1.0 clang: 13.0.0 Packages: pacman: 1342 lib: 353 flatpak: 0
  Shell: Bash v: 5.1.16 running-in: konsole inxi: 3.3.12

How do I check for the sudo access because I thought I had it.

[ishaan2479]

su #enter root password
usermod -aG wheel <user_name>
exit

[MAYBL8]

did all that .
Still same issue.

[Strit]

You may need to relog/reboot for the new usergroup to be in effect.

[MAYBL8]

Sorry I didn’t say that . I did reboot.