No sound on my Realme Wireless 3 Bluetooth Earphones

I have been trying to connect my Bluetooth earphones but there is no sound.
i have tried changing profile. only HSP/HFP works but with very bad quality.

Hi @SenpaiShane ,
Welcome to the forum!!
I wonder whether you could post the output of the following terminal command, in order help you:
inxi -v7azy
Regards,

here

Kernel: 6.9.2-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.1.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.9-x86_64
    root=UUID=d6f5ce5e-0043-47bb-a8f0-fd6d82114888 rw quiet splash
    resume=UUID=2426c5c3-9c1f-4023-8929-dbbf6eb0c08d udev.log_priority=3
  Desktop: KDE Plasma v: 6.0.5 tk: Qt v: N/A info: frameworks v: 6.2.0
    wm: kwin_wayland vt: 1 dm: SDDM Distro: Manjaro base: Arch Linux
Machine:
  Type: Laptop System: HP product: Victus by HP Laptop 16-e0xxx v: N/A
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: HP model: 8934 v: 80.73 serial: <superuser required>
    part-nu: 4N0W7PA#ACJ uuid: <superuser required> UEFI: AMI v: F.19
    date: 10/17/2023
Battery:
  ID-1: BAT0 charge: 59.0 Wh (100.0%) condition: 59.0/59.0 Wh (100.0%)
    power: 36.6 W volts: 15.9 min: 15.4 model: HP Primary type: Li-ion
    serial: <filter> status: discharging cycles: 45
Memory:
  System RAM: total: 8 GiB available: 7.1 GiB used: 3.28 GiB (46.2%)
  Message: For most reliable report, use superuser + dmidecode.
  Array-1: capacity: 32 GiB slots: 2 modules: 1 EC: None
    max-module-size: 16 GiB note: est.
  Device-1: Bottom - Slot 1 (left) type: DDR4 detail: synchronous unbuffered
    (unregistered) size: 8 GiB speed: 3200 MT/s volts: note: check curr: 1
    min: 1 max: 1 width (bits): data: 64 total: 64
    manufacturer: Micron Technology part-no: 8ATF1G64HZ-3G2R1 serial: <filter>
  Device-2: Bottom - Slot 2 (right) type: no module installed
CPU:
  Info: model: AMD Ryzen 5 5600H with Radeon Graphics bits: 64 type: MT MCP
    arch: Zen 3 gen: 4 level: v3 note: check built: 2021-22
    process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
    microcode: 0xA50000F
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 16 MiB
    desc: 1x16 MiB
  Speed (MHz): avg: 653 high: 1429 min/max: 400/4280 scaling:
    driver: amd-pstate-epp governor: powersave cores: 1: 400 2: 400 3: 400
    4: 1397 5: 400 6: 1429 7: 400 8: 400 9: 400 10: 400 11: 400 12: 1414
    bogomips: 79086
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de debug_swap decodeassists erms extapic
    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
    svm svm_lock syscall tce topoext tsc tsc_scale umip user_shstk v_spec_ctrl
    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
    xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves xtopology
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow mitigation: Safe RET
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW;
    STIBP: always-on; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not
    affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 14 [Radeon RX 5500/5500M / Pro 5500M]
    vendor: Hewlett-Packard driver: amdgpu v: kernel arch: RDNA-1 code: Navi-1x
    process: TSMC n7 (7nm) built: 2019-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: none empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:7340
    class-ID: 0380
  Device-2: AMD Cezanne [Radeon Vega Series / Radeon Mobile Series]
    vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5 code: Vega
    process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s ports: active: eDP-1 empty: DP-1
    bus-ID: 08:00.0 chip-ID: 1002:1638 class-ID: 0300 temp: 40.0 C
  Device-3: Quanta HP Wide Vision HD Camera driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-3:3 chip-ID: 0408:5425
    class-ID: fe01 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.0
    compositor: kwin_wayland driver: X: loaded: modesetting alternate: fbdev,vesa
    dri: radeonsi gpu: amdgpu,amdgpu display-ID: 0
  Monitor-1: eDP-1 res: 1920x1080 size: N/A modes: N/A
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
    device: 1 drv: radeonsi device: 2 drv: swrast surfaceless: drv: radeonsi
    wayland: drv: radeonsi x11: drv: radeonsi inactive: gbm
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.0.8-manjaro1.1
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi renoir
    LLVM 17.0.6 DRM 3.57 6.9.2-1-MANJARO) device-ID: 1002:1638 memory: 500 MiB
    unified: no display-ID: :1.0
  API: Vulkan Message: No Vulkan data available.
Audio:
  Device-1: AMD Navi 10 HDMI Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 03:00.1 chip-ID: 1002:ab38 class-ID: 0403
  Device-2: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 08:00.1 chip-ID: 1002:1637
    class-ID: 0403
  Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard
    driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x, snd_pci_acp5x,
    snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
    snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
    snd_sof_amd_acp63 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
    speed: 16 GT/s bus-ID: 08:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-4: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 08:00.6 chip-ID: 1022:15e3
    class-ID: 0403
  API: ALSA v: k6.9.2-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.0.7 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: eno1 state: down mac: <filter>
  Device-2: Realtek RTL8852AE 802.11ax PCIe Wireless Network Adapter
    vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 05:00.0 chip-ID: 10ec:8852
    class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  IP v4: <filter> type: dynamic scope: global broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
  WAN IP: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-4:4 chip-ID: 0bda:2852
    class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 476.94 GiB used: 29.04 GiB (6.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVL2512HCJQ-00BH1
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: HPS3NGXH temp: 36.9 C
    scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 150.04 GiB size: 146.62 GiB (97.72%) used: 11.47 GiB (7.8%)
    fs: ext4 dev: /dev/nvme0n1p6 maj-min: 259:6 label: N/A
    uuid: d6f5ce5e-0043-47bb-a8f0-fd6d82114888
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 58.7 MiB (61.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
    uuid: 962F-DDC1
  ID-3: /home/<filter>/My Drive raw-size: 109.85 GiB
    size: 109.85 GiB (100.00%) used: 17.51 GiB (15.9%) fs: ntfs
    dev: /dev/nvme0n1p4 maj-min: 259:4 label: N/A uuid: 01DAB1A3EBE8D060
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
    compressor: zstd max-pool: 20%
  ID-1: swap-1 type: partition size: 16 GiB used: 32 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p7 maj-min: 259:7 label: N/A
    uuid: 2426c5c3-9c1f-4023-8929-dbbf6eb0c08d
Unmounted:
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 200.19 GiB fs: ntfs label: N/A
    uuid: 01DAB1A400AD20F0
  ID-3: /dev/nvme0n1p5 maj-min: 259:5 size: 768 MiB fs: ntfs label: N/A
    uuid: A4225FDA225FB052
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-2:2 info: Logitech G102/G203 LIGHTSYNC Gaming Mouse
    type: mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 300mA
    chip-ID: 046d:c092 class-ID: 0300 serial: <filter>
  Device-2: 1-3:3 info: Quanta HP Wide Vision HD Camera type: video
    driver: uvcvideo interfaces: 3 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 500mA chip-ID: 0408:5425 class-ID: fe01 serial: <filter>
  Device-3: 1-4:4 info: Realtek Bluetooth Radio type: bluetooth driver: btusb
    interfaces: 2 rev: 1.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 500mA chip-ID: 0bda:2852 class-ID: e001 serial: <filter>
  Hub-2: 2-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A
  Fan Speeds (rpm): fan-1: 0 fan-2: 0
  GPU: device: amdgpu temp: 40.0 C mem: 0.0 C fan: 65535 watts: 4.00
    device: amdgpu temp: 41.0 C
Info:
  Processes: 323 Power: uptime: 3h 21m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 2 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 2.82 GiB services: org_kde_powerdevil,
    power-profiles-daemon, upowerd Init: systemd v: 255 default: graphical
    tool: systemctl
  Packages: pm: pacman pkgs: 1217 libs: 352 tools: octopi,pamac,yay
    pm: flatpak pkgs: 0 Compilers: gcc: 14.1.1 Shell: Zsh v: 5.9
    running-in: kitty inxi: 3.3.34

Hi @SenpaiShane ,

I wonder whether you could read the following posts in order to solve the problem:
Switched to pipewire, no A2DP profile for headphones

[HowTo] Enhance your Linux audio with EasyEffects or PulseEffects Legacy

Hope it help, regards.

tried both but no sound…a2dp profiles are available but none of them works. only hsp ones are working but sound quality is bad

Hi @SenpaiShane,
I understand that the problem is not easy to solve. Please, consider to read the following post and check whether you have installed all the packages for pipewire.
Bluetooth headset - ArchWiki

Also based on the bluetooth client you have installed on KDE Plasma this post may be interesting, in order to solve the problem.
Bluetooth - ArchWiki

Regards,

i tried what ever i could but still not resolved. Through the process i did get a workaround. my headset supports dual pairing. when ever i play anything on my phone and then connect it with my laptop it works with a2dp profile till i switch the connection.

Hi @SenpaiShane ,

Can you post the output of the following terminal commands?
pactl list

and
journalctl -f

Regards,

➜  ~ pactl list 
Module #1
	Name: libpipewire-module-rt
	Argument: {
            nice.level    = -11
            rt.prio       = 88
            #rt.time.soft = -1
            #rt.time.hard = -1
            #uclamp.min = 0
            #uclamp.max = 1024
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-rt"
		object.id = "1"
		object.serial = "1"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Use realtime thread scheduling, falling back to RTKit"
		module.usage = "( nice.level=<priority: default 20(don't change)> ) ( rt.prio=<priority: default 83> ) ( rt.time.soft=<in usec: default -1> ) ( rt.time.hard=<in usec: default -1> ) ( rlimits.enabled=<default true> ) ( rtportal.enabled=<default true> ) ( rtkit.enabled=<default true> ) ( uclamp.min=<default 0> ) ( uclamp.max=<default 1024> )"
		module.version = "1.0.7"
		nice.level = "-11"
		rt.prio = "88"

Module #2
	Name: libpipewire-module-protocol-native
	Argument: {
            # List of server Unix sockets, and optionally permissions
            #sockets = [ { name = "pipewire-0" }, { name = "pipewire-0-manager" } ]
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-protocol-native"
		object.id = "2"
		object.serial = "2"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Native protocol using unix sockets"
		module.version = "1.0.7"

Module #3
	Name: libpipewire-module-profiler
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-profiler"
		object.id = "3"
		object.serial = "3"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Generate Profiling data"
		module.version = "1.0.7"

Module #5
	Name: libpipewire-module-metadata
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-metadata"
		object.id = "5"
		object.serial = "5"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create metadata store"
		module.version = "1.0.7"

Module #7
	Name: libpipewire-module-spa-device-factory
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-spa-device-factory"
		object.id = "7"
		object.serial = "7"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Provide a factory to make SPA devices"
		module.version = "1.0.7"

Module #9
	Name: libpipewire-module-spa-node-factory
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-spa-node-factory"
		object.id = "9"
		object.serial = "9"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Provide a factory to make SPA nodes"
		module.version = "1.0.7"

Module #11
	Name: libpipewire-module-client-node
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-client-node"
		object.id = "11"
		object.serial = "11"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create and control remote nodes"
		module.version = "1.0.7"

Module #13
	Name: libpipewire-module-client-device
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-client-device"
		object.id = "13"
		object.serial = "13"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create and control remote devices"
		module.version = "1.0.7"

Module #15
	Name: libpipewire-module-portal
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-portal"
		object.id = "15"
		object.serial = "15"

Module #16
	Name: libpipewire-module-access
	Argument: {
            # Socket-specific access permissions
            #access.socket = { pipewire-0 = "default", pipewire-0-manager = "unrestricted" }

            # Deprecated legacy mode (not socket-based),
            # for now enabled by default if access.socket is not specified
            #access.legacy = true
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-access"
		object.id = "16"
		object.serial = "16"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Perform access check"
		module.usage = "( access.socket={ <socket>=<access>, ... } ) ( access.legacy=true ) "
		module.version = "1.0.7"

Module #17
	Name: libpipewire-module-adapter
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-adapter"
		object.id = "17"
		object.serial = "17"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Manage adapter nodes"
		module.version = "1.0.7"

Module #19
	Name: libpipewire-module-link-factory
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-link-factory"
		object.id = "19"
		object.serial = "19"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create links"
		module.usage = "( allow.link.passive=<bool, default false> ) "
		module.version = "1.0.7"

Module #21
	Name: libpipewire-module-session-manager
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-session-manager"
		object.id = "21"
		object.serial = "21"
		module.author = "George Kiagiadakis <george.kiagiadakis@collabora.com>"
		module.description = "Implements objects for session management"
		module.version = "1.0.7"

Module #28
	Name: libpipewire-module-x11-bell
	Argument: {
            #sink.name = "@DEFAULT_SINK@"
            #sample.name = "bell-window-system"
            #x11.display = null
            #x11.xauthority = null
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-x11-bell"
		object.id = "28"
		object.serial = "28"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "X11 Bell interceptor"
		module.usage = "( sink.name=<name for the sink> ) ( sample.name=<the sample name> ) ( x11.display=<the X11 display> ) .x11.xauthority=<the X11 XAuthority> )"
		module.version = "1.0.7"

Module #536870912
	Name: module-always-sink
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Pauli Virtanen <pav@iki.fi>"
		module.description = "Always keeps at least one sink loaded even if it's a null one"
		module.usage = "sink_name=<name of sink>"
		module.version = "1.0.7"

Sink #50
	State: SUSPENDED
	Name: alsa_output.pci-0000_08_00.6.HiFi__hw_Generic_1__sink
	Description: Family 17h/19h HD Audio Controller Speaker + Headphones
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 36854 /  56% / -15.00 dB,   front-right: 36854 /  56% / -15.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_08_00.6.HiFi__hw_Generic_1__sink.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0245,103c8934,00100001"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "Generic_1"
		alsa.long_card_name = "HD-Audio Generic at 0xfc9c0000 irq 83"
		alsa.mixer_device = "_ucm0004.hw:Generic_1"
		alsa.mixer_name = "Realtek ALC245"
		alsa.name = "ALC245 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc9c0000 irq 83"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.open.ucm = "true"
		api.alsa.path = "hw:Generic_1"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "0"
		device.api = "alsa"
		device.class = "sound"
		device.id = "44"
		device.profile.description = "Speaker + Headphones"
		device.profile.name = "HiFi: hw:Generic_1: sink"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Family 17h/19h HD Audio Controller"
		node.name = "alsa_output.pci-0000_08_00.6.HiFi__hw_Generic_1__sink"
		node.nick = "ALC245 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:2:hw:Generic_1:playback"
		priority.driver = "1000"
		priority.session = "1000"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		factory.mode = "merge"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "50"
		object.serial = "50"
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:08:00.6"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_08_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "7633894"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.string = "2"
	Ports:
		[Out] Speaker: Speaker (type: Speaker, priority: 100, availability unknown)
		[Out] Headphones: Headphones (type: Headphones, priority: 200, availability group: Headphone, not available)
	Active Port: [Out] Speaker
	Formats:
		pcm

Sink #160
	State: SUSPENDED
	Name: bluez_output.98_47_44_23_C2_67.1
	Description: realme Buds Wireless 3
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 32113 /  49% / -18.59 dB,   front-right: 32113 /  49% / -18.59 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: bluez_output.98_47_44_23_C2_67.1.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		api.bluez5.address = "98:47:44:23:C2:67"
		api.bluez5.codec = "aac"
		api.bluez5.profile = "a2dp-sink"
		api.bluez5.transport = ""
		bluez5.loopback = "false"
		card.profile.device = "1"
		device.id = "82"
		device.routes = "1"
		factory.name = "api.bluez5.a2dp.sink"
		device.description = "realme Buds Wireless 3"
		node.name = "bluez_output.98_47_44_23_C2_67.1"
		node.pause-on-idle = "false"
		priority.driver = "1010"
		priority.session = "1010"
		factory.id = "11"
		clock.quantum-limit = "8192"
		device.api = "bluez5"
		media.class = "Audio/Sink"
		media.name = "realme Buds Wireless 3"
		node.driver = "true"
		factory.mode = "merge"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "90"
		object.serial = "160"
		client.id = "41"
		api.bluez5.class = "0x240404"
		api.bluez5.connection = "disconnected"
		api.bluez5.device = ""
		api.bluez5.icon = "audio-headset"
		api.bluez5.id = "6"
		api.bluez5.path = "/org/bluez/hci0/dev_98_47_44_23_C2_67"
		bluez5.profile = "off"
		device.alias = "realme Buds Wireless 3"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-bluetooth"
		device.name = "bluez_card.98_47_44_23_C2_67"
		device.string = "98:47:44:23:C2:67"
	Ports:
		headset-output: Headset (type: Headset, priority: 0, available)
	Active Port: headset-output
	Formats:
		pcm

Source #50
	State: SUSPENDED
	Name: alsa_output.pci-0000_08_00.6.HiFi__hw_Generic_1__sink.monitor
	Description: Monitor of Family 17h/19h HD Audio Controller Speaker + Headphones
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_08_00.6.HiFi__hw_Generic_1__sink
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0245,103c8934,00100001"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "Generic_1"
		alsa.long_card_name = "HD-Audio Generic at 0xfc9c0000 irq 83"
		alsa.mixer_device = "_ucm0004.hw:Generic_1"
		alsa.mixer_name = "Realtek ALC245"
		alsa.name = "ALC245 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc9c0000 irq 83"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.open.ucm = "true"
		api.alsa.path = "hw:Generic_1"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "0"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "44"
		device.profile.description = "Speaker + Headphones"
		device.profile.name = "HiFi: hw:Generic_1: sink"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Family 17h/19h HD Audio Controller"
		node.name = "alsa_output.pci-0000_08_00.6.HiFi__hw_Generic_1__sink"
		node.nick = "ALC245 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:2:hw:Generic_1:playback"
		priority.driver = "1000"
		priority.session = "1000"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		factory.mode = "merge"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "50"
		object.serial = "50"
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:08:00.6"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_08_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "7633894"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.string = "2"
	Ports:
		[Out] Speaker: Speaker (type: Speaker, priority: 100, availability unknown)
		[Out] Headphones: Headphones (type: Headphones, priority: 200, availability group: Headphone, not available)
	Active Port: [Out] Speaker
	Formats:
		pcm

Source #51
	State: SUSPENDED
	Name: alsa_input.pci-0000_08_00.6.HiFi__hw_Generic_1__source
	Description: Family 17h/19h HD Audio Controller Headphones Stereo Microphone
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0245,103c8934,00100001"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "Generic_1"
		alsa.long_card_name = "HD-Audio Generic at 0xfc9c0000 irq 83"
		alsa.mixer_device = "_ucm0004.hw:Generic_1"
		alsa.mixer_name = "Realtek ALC245"
		alsa.name = "ALC245 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc9c0000 irq 83"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.open.ucm = "true"
		api.alsa.path = "hw:Generic_1"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "1"
		device.api = "alsa"
		device.class = "sound"
		device.id = "44"
		device.profile.description = "Headphones Stereo Microphone"
		device.profile.name = "HiFi: hw:Generic_1: source"
		device.routes = "1"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "Family 17h/19h HD Audio Controller"
		node.name = "alsa_input.pci-0000_08_00.6.HiFi__hw_Generic_1__source"
		node.nick = "ALC245 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:2:hw:Generic_1:capture"
		priority.driver = "2000"
		priority.session = "2000"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		factory.mode = "split"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "51"
		object.serial = "51"
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:08:00.6"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_08_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "7633894"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.string = "2"
	Ports:
		[In] Mic2: Headphones Stereo Microphone (type: Mic, priority: 200, availability group: Mic, not available)
	Active Port: [In] Mic2
	Formats:
		pcm

Source #52
	State: SUSPENDED
	Name: alsa_input.pci-0000_08_00.6.HiFi__hw_acp__source
	Description: Family 17h/19h HD Audio Controller Digital Microphone
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "3"
		alsa.card_name = "acp"
		alsa.class = "generic"
		alsa.device = "0"
		alsa.driver_name = "snd_acp3x_rn"
		alsa.id = "acp"
		alsa.long_card_name = "HP-VictusbyHPLaptop16_e0xxx--8934"
		alsa.mixer_device = "_ucm0004.hw:Generic_1"
		alsa.name = ""
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc9c0000 irq 83"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.open.ucm = "true"
		api.alsa.path = "hw:acp"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "2"
		device.api = "alsa"
		device.class = "sound"
		device.id = "44"
		device.profile.description = "Digital Microphone"
		device.profile.name = "HiFi: hw:acp: source"
		device.routes = "1"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "Family 17h/19h HD Audio Controller"
		node.name = "alsa_input.pci-0000_08_00.6.HiFi__hw_acp__source"
		node.nick = "Digital Microphone"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:2:hw:acp:capture"
		priority.driver = "2000"
		priority.session = "2000"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		factory.mode = "split"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "52"
		object.serial = "52"
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:08:00.6"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_08_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "7633894"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		alsa.mixer_name = "Realtek ALC245"
		alsa.components = "HDA:10ec0245,103c8934,00100001"
		device.string = "2"
	Ports:
		[In] Mic1: Digital Microphone (type: Mic, priority: 100, availability unknown)
	Active Port: [In] Mic1
	Formats:
		pcm

Source #158
	State: SUSPENDED
	Name: bluez_input.98:47:44:23:C2:67
	Description: realme Buds Wireless 3
	Driver: PipeWire
	Sample Specification: float32le 1ch 48000Hz
	Channel Map: mono
	Owner Module: 4294967295
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		card.profile.device = "0"
		audio.position = "[MONO]"
		device.description = "realme Buds Wireless 3"
		filter.smart = "true"
		filter.smart.target = "{\"bluez5.loopback-target\":true, \"device.id\":82, \"bluez5.loopback\":false}"
		priority.driver = "2010"
		priority.session = "2010"
		device.id = "82"
		bluez5.loopback = "true"
		node.name = "bluez_input.98:47:44:23:C2:67"
		media.class = "Audio/Source"
		node.group = "loopback-901-18"
		node.link-group = "loopback-901-18"
		node.virtual = "true"
		resample.prefill = "true"
		resample.disable = "true"
		media.name = "realme Buds Wireless 3 output"
		stream.is-live = "true"
		node.want-driver = "true"
		node.autoconnect = "true"
		node.trigger = "true"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "11"
		clock.quantum-limit = "8192"
		factory.mode = "split"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "91"
		object.id = "93"
		object.serial = "158"
		api.bluez5.address = "98:47:44:23:C2:67"
		api.bluez5.class = "0x240404"
		api.bluez5.connection = "disconnected"
		api.bluez5.device = ""
		api.bluez5.icon = "audio-headset"
		api.bluez5.id = "6"
		api.bluez5.path = "/org/bluez/hci0/dev_98_47_44_23_C2_67"
		bluez5.profile = "off"
		device.alias = "realme Buds Wireless 3"
		device.api = "bluez5"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-bluetooth"
		device.name = "bluez_card.98_47_44_23_C2_67"
		device.string = "98:47:44:23:C2:67"
	Formats:
		pcm

Source #160
	State: SUSPENDED
	Name: bluez_output.98_47_44_23_C2_67.1.monitor
	Description: Monitor of realme Buds Wireless 3
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: bluez_output.98_47_44_23_C2_67.1
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		api.bluez5.address = "98:47:44:23:C2:67"
		api.bluez5.codec = "aac"
		api.bluez5.profile = "a2dp-sink"
		api.bluez5.transport = ""
		bluez5.loopback = "false"
		card.profile.device = "1"
		device.id = "82"
		device.routes = "1"
		factory.name = "api.bluez5.a2dp.sink"
		device.description = "realme Buds Wireless 3"
		node.name = "bluez_output.98_47_44_23_C2_67.1"
		node.pause-on-idle = "false"
		priority.driver = "1010"
		priority.session = "1010"
		factory.id = "11"
		clock.quantum-limit = "8192"
		device.api = "bluez5"
		media.class = "Audio/Sink"
		media.name = "realme Buds Wireless 3"
		node.driver = "true"
		factory.mode = "merge"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "90"
		object.serial = "160"
		client.id = "41"
		api.bluez5.class = "0x240404"
		api.bluez5.connection = "disconnected"
		api.bluez5.device = ""
		api.bluez5.icon = "audio-headset"
		api.bluez5.id = "6"
		api.bluez5.path = "/org/bluez/hci0/dev_98_47_44_23_C2_67"
		bluez5.profile = "off"
		device.alias = "realme Buds Wireless 3"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-bluetooth"
		device.name = "bluez_card.98_47_44_23_C2_67"
		device.string = "98:47:44:23:C2:67"
		device.class = "monitor"
	Ports:
		headset-output: Headset (type: Headset, priority: 0, available)
	Active Port: headset-output
	Formats:
		pcm

Client #32
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "835"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "32"
		object.serial = "32"
		application.name = "kwin_wayland"
		application.process.binary = "kwin_wayland"
		application.language = "en_IN"
		application.process.id = "835"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.session_id = "2"
		log.level = "0"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-835"
		pipewire.access = "unrestricted"

Client #33
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0-manager"
		pipewire.sec.pid = "901"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "33"
		object.serial = "33"
		application.name = "WirePlumber"
		application.version = "0.5.2"
		wireplumber.daemon = "true"
		wireplumber.profile = "main"
		remote.name = "[pipewire-0-manager,pipewire-0]"
		config.name = "null"
		context.modules.allow-empty = "true"
		application.process.binary = "wireplumber"
		application.language = "en_IN"
		application.process.id = "901"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.session_id = "2"
		window.x11.display = ":1"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-901"
		pipewire.access = "unrestricted"

Client #41
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0-manager"
		pipewire.sec.pid = "901"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "41"
		object.serial = "41"
		application.name = "WirePlumber [export]"
		wireplumber.export-core = "true"
		application.version = "0.5.2"
		wireplumber.daemon = "true"
		wireplumber.profile = "main"
		remote.name = "[pipewire-0-manager,pipewire-0]"
		config.name = "null"
		context.modules.allow-empty = "true"
		application.process.binary = "wireplumber"
		application.language = "en_IN"
		application.process.id = "901"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.session_id = "2"
		window.x11.display = ":1"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-901"
		pipewire.access = "unrestricted"

Client #71
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "843"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "69"
		object.serial = "71"
		pipewire.access.portal.is_portal = "true"
		portal.monitor = "Camera"
		application.name = "xdg-desktop-portal"
		application.process.binary = "xdg-desktop-portal"
		application.language = "en_IN"
		application.process.id = "843"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.session_id = "2"
		window.x11.display = ":1"
		log.level = "0"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-843"
		pipewire.access = "unrestricted"

Client #72
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1063"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "70"
		object.serial = "72"
		application.name = "plasmashell"
		application.process.binary = "plasmashell"
		application.language = "en_IN"
		application.process.id = "1063"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.session_id = "2"
		window.x11.display = ":1"
		log.level = "0"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-1063"
		pipewire.access = "unrestricted"

Client #73
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1437"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "71"
		object.serial = "73"
		config.name = "pipewire-pulse.conf"
		application.name = "pipewire"
		application.process.binary = "pipewire"
		application.language = "en_IN"
		application.process.id = "1437"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.session_id = "2"
		window.x11.display = ":1"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-1437"
		pipewire.access = "unrestricted"

Client #74
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1437"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "72"
		object.serial = "74"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "libcanberra"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "1063"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.binary = "plasmashell"
		application.language = "en_IN"
		window.x11.display = ":1"
		application.process.machine_id = "f12fd9a803634f68a37c72e731df4710"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-1437"
		pipewire.access = "unrestricted"

Client #75
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1437"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "73"
		object.serial = "75"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Plasma PA"
		application.id = "org.kde.plasma-pa"
		application.icon_name = "audio-card"
		application.process.id = "1063"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.binary = "plasmashell"
		application.language = "en_IN"
		window.x11.display = ":1"
		application.process.machine_id = "f12fd9a803634f68a37c72e731df4710"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-1437"
		pipewire.access = "unrestricted"

Client #104
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1437"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "78"
		object.serial = "104"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Firefox"
		application.process.id = "1604"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.binary = "firefox"
		application.language = "en_IN"
		window.x11.display = ":1"
		application.process.machine_id = "f12fd9a803634f68a37c72e731df4710"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-1437"
		pipewire.access = "unrestricted"

Client #157
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0-manager"
		pipewire.sec.pid = "901"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "91"
		object.serial = "157"
		application.name = "WirePlumber"
		application.version = "0.5.2"
		wireplumber.daemon = "true"
		wireplumber.profile = "main"
		remote.name = "[pipewire-0-manager,pipewire-0]"
		config.name = "null"
		context.modules.allow-empty = "true"
		application.process.binary = "wireplumber"
		application.language = "en_IN"
		application.process.id = "901"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.session_id = "2"
		window.x11.display = ":1"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-901"
		pipewire.access = "unrestricted"

Client #224
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1437"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "80"
		object.serial = "224"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.version = "126.0.1"
		application.name = "Firefox"
		application.icon_name = "firefox"
		application.process.id = "1604"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.binary = "firefox"
		application.language = "en_IN"
		window.x11.display = ":1"
		application.process.machine_id = "f12fd9a803634f68a37c72e731df4710"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-1437"
		pipewire.access = "unrestricted"

Client #250
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1437"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "106"
		object.serial = "250"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.process.id = "5053"
		application.process.user = ""
		application.process.host = "anurag-victus"
		application.process.binary = "pactl"
		application.name = "pactl"
		application.language = "en_IN"
		window.x11.display = ":1"
		application.process.machine_id = "f12fd9a803634f68a37c72e731df4710"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.0.7"
		core.name = "pipewire-anurag-1437"
		pipewire.access = "unrestricted"

Sample #0
	Name: audio-volume-change
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Duration: 0.3s
	Size: 56.4 KiB
	Lazy: no
	Filename: n/a
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "libcanberra"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "1063"
		application.process.user = "anurag"
		application.process.host = "anurag-victus"
		application.process.binary = "plasmashell"
		application.language = "en_IN"
		window.x11.display = ":1"
		application.process.machine_id = "f12fd9a803634f68a37c72e731df4710"
		application.process.session_id = "2"
		event.id = "audio-volume-change"
		event.description = "Volume Control Feedback Sound"
		media.role = "event"
		media.name = "audio-volume-change"
		media.filename = "/usr/share/sounds/ocean/stereo/audio-volume-change.oga"

Card #42
	Name: alsa_card.pci-0000_03_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA ATI HDMI at 0xfcaa0000 irq 81"
		api.alsa.card.name = "HDA ATI HDMI"
		api.alsa.path = "hw:0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:03:00.1"
		device.description = "Navi 10 HDMI Audio"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_03_00.1"
		device.nick = "HDA ATI HDMI"
		device.plugged.usec = "7466665"
		device.product.id = "0xab38"
		device.product.name = "Navi 10 HDMI Audio"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "41"
		object.id = "42"
		object.serial = "42"
		object.path = "alsa:pcm:0"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfcaa0000 irq 81"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100700"
		alsa.id = "HDMI"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		HiFi: Play HiFi quality Music (sinks: 1, sources: 0, priority: 8000, available: no)
		pro-audio: Pro Audio (sinks: 1, sources: 0, priority: 1, available: yes)
	Active Profile: off
	Ports:
		[Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 1100, latency offset: 0 usec, availability group: HDMI/DP,pcm=3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "HDMI/DP,pcm=3"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Part of profile(s): HiFi

Card #43
	Name: alsa_card.pci-0000_08_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc9c8000 irq 82"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:08:00.1"
		device.description = "Renoir Radeon High Definition Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_08_00.1"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "7466928"
		device.product.id = "0x1637"
		device.product.name = "Renoir Radeon High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card1"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "41"
		object.id = "43"
		object.serial = "43"
		object.path = "alsa:pcm:1"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc9c8000 irq 82"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100700"
		alsa.id = "Generic"
		device.string = "1"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		HiFi: Play HiFi quality Music (sinks: 1, sources: 0, priority: 8000, available: no)
		pro-audio: Pro Audio (sinks: 1, sources: 0, priority: 1, available: yes)
	Active Profile: off
	Ports:
		[Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 1100, latency offset: 0 usec, availability group: HDMI/DP,pcm=3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "HDMI/DP,pcm=3"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Part of profile(s): HiFi

Card #44
	Name: alsa_card.pci-0000_08_00.6
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc9c0000 irq 83"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:08:00.6"
		device.description = "Family 17h/19h HD Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_08_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "7633894"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "41"
		object.id = "44"
		object.serial = "44"
		object.path = "alsa:pcm:2"
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc9c0000 irq 83"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC245"
		alsa.components = "HDA:10ec0245,103c8934,00100001"
		alsa.id = "Generic_1"
		device.string = "2"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		HiFi: Play HiFi quality Music (sinks: 1, sources: 2, priority: 8000, available: yes)
		pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
	Active Profile: HiFi
	Ports:
		[Out] Speaker: Speaker (type: Speaker, priority: 100, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "speaker"
				device.icon_name = "audio-speakers"
				card.profile.port = "0"
			Part of profile(s): HiFi
		[Out] Headphones: Headphones (type: Headphones, priority: 200, latency offset: 0 usec, availability group: Headphone, not available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Headphone"
				device.icon_name = "audio-headphones"
				card.profile.port = "1"
			Part of profile(s): HiFi
		[In] Mic2: Headphones Stereo Microphone (type: Mic, priority: 200, latency offset: 0 usec, availability group: Mic, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Mic"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "2"
			Part of profile(s): HiFi
		[In] Mic1: Digital Microphone (type: Mic, priority: 100, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "mic"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "3"
			Part of profile(s): HiFi

Card #156
	Name: bluez_card.98_47_44_23_C2_67
	Driver: module-bluez5-device.c
	Owner Module: n/a
	Properties:
		api.bluez5.address = "98:47:44:23:C2:67"
		api.bluez5.class = "0x240404"
		api.bluez5.connection = "disconnected"
		api.bluez5.device = ""
		api.bluez5.icon = "audio-headset"
		api.bluez5.id = "6"
		api.bluez5.path = "/org/bluez/hci0/dev_98_47_44_23_C2_67"
		bluez5.profile = "off"
		device.alias = "realme Buds Wireless 3"
		device.api = "bluez5"
		device.bus = "bluetooth"
		device.description = "realme Buds Wireless 3"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-bluetooth"
		device.name = "bluez_card.98_47_44_23_C2_67"
		device.string = "98:47:44:23:C2:67"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "41"
		object.id = "82"
		object.serial = "156"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		headset-head-unit: Headset Head Unit (HSP/HFP) (sinks: 1, sources: 1, priority: 1, available: yes)
		a2dp-sink-sbc: High Fidelity Playback (A2DP Sink, codec SBC) (sinks: 1, sources: 0, priority: 18, available: yes)
		a2dp-sink-sbc_xq: High Fidelity Playback (A2DP Sink, codec SBC-XQ) (sinks: 1, sources: 0, priority: 17, available: yes)
		a2dp-sink: High Fidelity Playback (A2DP Sink, codec AAC) (sinks: 1, sources: 0, priority: 19, available: yes)
		headset-head-unit-cvsd: Headset Head Unit (HSP/HFP, codec CVSD) (sinks: 1, sources: 1, priority: 2, available: yes)
		headset-head-unit-msbc: Headset Head Unit (HSP/HFP, codec mSBC) (sinks: 1, sources: 1, priority: 3, available: yes)
	Active Profile: a2dp-sink
	Ports:
		headset-output: Headset (type: Headset, priority: 0, latency offset: 0 usec, available)
			Properties:
				port.type = "headset"
			Part of profile(s): a2dp-sink-sbc, a2dp-sink-sbc_xq, a2dp-sink
		headset-hf-input: Handsfree (type: Headset, priority: 0, latency offset: 0 usec, available)
			Properties:
				port.type = "headset"
			Part of profile(s): headset-head-unit, headset-head-unit-cvsd, headset-head-unit-msbc
		headset-hf-output: Handsfree (type: Headset, priority: 0, latency offset: 0 usec, available)
			Properties:
				port.type = "headset"
			Part of profile(s): headset-head-unit, headset-head-unit-cvsd, headset-head-unit-msbc
➜  ~ journalctl -f 
Jun 10 23:45:39 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:45:39 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:45:39 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:45:39 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:45:42 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:45:45 anurag-victus systemd[1]: flatpak-system-helper.service: Deactivated successfully.
Jun 10 23:45:47 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:45:49 anurag-victus plasmashell[1063]: kf.windowsystem.wayland: Failed to recreate shadow for PlasmaQuick::AppletPopup(0x5cd3d56df8d0, name="popupWindow")
Jun 10 23:45:49 anurag-victus plasmashell[1063]: qt.qpa.wayland: eglSwapBuffers failed with 0x300d, surface: 0x0
Jun 10 23:45:49 anurag-victus plasmashell[1063]: file:///usr/share/plasma/plasmoids/org.kde.plasma.volume/contents/ui/main.qml:775:17: QML PlasmoidHeading: Binding loop detected for property "leftInset"
Jun 10 23:45:54 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:05 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:08 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:09 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:09 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:09 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:09 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:09 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:09 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:10 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:10 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:13 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:14 anurag-victus plasmashell[1063]: file:///usr/share/plasma/plasmoids/org.kde.plasma.volume/contents/ui/main.qml:775:17: QML PlasmoidHeading: Binding loop detected for property "leftInset"
Jun 10 23:46:19 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:19 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:22 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:29 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:31 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:31 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:31 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:31 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:31 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:31 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:31 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:31 anurag-victus bluealsa[629]: Device not available: /org/bluez/hci0/dev_98_47_44_23_C2_67/fd3
Jun 10 23:46:32 anurag-victus plasmashell[1063]: file:///usr/share/plasma/plasmoids/org.kde.plasma.volume/contents/ui/main.qml:775:17: QML PlasmoidHeading: Binding loop detected for property "leftInset"

Hi @SenpaiShane ,
Do you have installed bluez-utils?. Please, post the output of the following terminal command:
sudo pacman -Ss bluez-utils

Maybe, you can try to execute the following terminal commands, in order to solve the problem.
sudo systemctl stop bluetooth
sudo rm -rf /var/lib/bluetooth
sudo systemctl start bluetooth

Your a2dp profile is sinked, you will not see it. I wonder whether you could read this post in order to solve the problem. Read section 1.1.1. Using WirePlumber.
Bluetooth headset - ArchWiki

Hope it help, reards