Hi,
I’m new to this forum and Manjaro in general. I migrated a few days ago.
Also, I use an external monitor (Eizo EV2360). Both of my displays are of 16:10 ratio.
I currently use open source drivers and I see no major problems using my laptop, but the performance sometimes could be better. Also, I’m unable to launch any game using lutris (I get an error message at startup informing that it is impossible to create a window).
My graphics card can be configured in BIOS in two modes: “Dynamic” and “Discrete”. Neither of these however work well with NVidia drivers.
In “Dynamic” mode only the built-in display works. My external screen is detected, but stays off and I can’t switch it on. An attempt to do so causes the screen to blink and return to the previous state immediately.
In “Discrete” mode both of the screens are on, but I can’t select resolution for my built-in display. There’s only one option: 2560x1600, which makes all the items way too small.
I’d like to use NVidia drivers to fully benefit from the power of my graphics card and continue using both of my displays.
As I said, I’m new to this forum. Can you tell me, what pieces of my system configuration I need to provide here?
Regards,
PS: I tried posting a picture of my “Hardware configuration” menu, but looks like I’m not allowed to post pictures here.
Welcome to the forum!
Difficulty: ★☆☆☆☆
Rather than providing the commercial reference of a computer or piece of hardware, it is usually better to directly ask the system to describe itself. On top of saving time to everyone, this also often provides more details, including something specific to the running system.
Below is a (not exhaustive) list of commands for retrieving system information.
[HowTo] Use the terminal / TTY …
I suggest using the proprietary NVIDIA drivers, then. See Configure NVIDIA (non-free) settings and load them on Startup - Manjaro
Hi @Yochanan
Thanks for the hints. As it’s getting quite late here, I’ll give it a go tomorrow.
System:
Kernel: 5.19.7-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.19-x86_64
root=UUID=9efecacd-fae6-4ed8-a120-f610bbc9eb3b rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME v: 42.4 tk: GTK v: 3.24.34 wm: gnome-shell dm: GDM v: 42.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 82N6 v: Legion 7 16ACHg6
serial: <superuser required> Chassis: type: 10 v: Legion 7 16ACHg6
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0T76461 WIN
serial: <superuser required> UEFI: LENOVO v: GKCN49WW date: 11/08/2021
Battery:
ID-1: BAT0 charge: 77.3 Wh (100.0%) condition: 77.3/80.0 Wh (96.6%)
volts: 17.3 min: 15.4 model: Celxpert L20C4PC1 type: Li-poly
serial: <filter> status: full cycles: 99
Memory:
RAM: total: 27.27 GiB used: 9.21 GiB (33.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: AMD Ryzen 7 5800H with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 gen: 4 level: v3 built: 2021-22 process: TSMC n7 (7nm)
family: 0x19 (25) model-id: 0x50 (80) stepping: 0 microcode: 0xA50000C
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 1479 high: 3200 min/max: 1200/4462 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1276 2: 1397
3: 1200 4: 1200 5: 1200 6: 3200 7: 1200 8: 1197 9: 1200 10: 1200 11: 1397
12: 3200 13: 1198 14: 1200 15: 1200 16: 1200 bogomips: 102267
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA104M [GeForce RTX 3070 Mobile / Max-Q] vendor: Lenovo
driver: nouveau v: kernel non-free: 515.xx+ status: current (as of 2022-08)
arch: Ampere code: GAxxx process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 3 speed: 8 GT/s lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16
ports: active: HDMI-A-1 empty: DP-1,DP-2,eDP-1 bus-ID: 01:00.0
chip-ID: 10de:24dd class-ID: 0300
Device-2: AMD Cezanne vendor: Lenovo driver: amdgpu v: kernel
arch: GCN-5.1 code: Vega-2 process: TSMC n7 (7nm) built: 2018-21 pcie:
gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports:
active: eDP-2 empty: none bus-ID: 05:00.0 chip-ID: 1002:1638
class-ID: 0300
Device-3: Chicony Integrated Camera type: USB driver: uvcvideo
bus-ID: 1-3:3 chip-ID: 04f2:b67d class-ID: 0e02
Display: wayland server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.3
compositor: gnome-shell driver: X: loaded: amdgpu,nvidia
unloaded: modesetting,nouveau,radeon alternate: fbdev,nv,vesa
gpu: amdgpu,nouveau display-ID: 0
Monitor-1: HDMI-A-1 model: EIZO NANAO EV2360 serial: <filter> built: 2021
res: 1920x1200 dpi: 100 gamma: 1.2 size: 489x298mm (19.25x11.73")
diag: 573mm (22.5") ratio: 15:9 modes: max: 1920x1200 min: 720x400
Monitor-2: eDP-2 model-id: CSO 0x1609 built: 2021 res: 2560x1600 dpi: 188
gamma: 1.2 size: 345x215mm (13.58x8.46") diag: 407mm (16") ratio: 16:10
modes: max: 2560x1600 min: 640x480
OpenGL: renderer: AMD RENOIR (LLVM 14.0.6 DRM 3.47 5.19.7-1-MANJARO) v: 4.6
Mesa 22.1.7 direct render: Yes
Audio:
Device-1: NVIDIA GA104 High Definition Audio driver: snd_hda_intel v: kernel
pcie: bus-ID: 1-2.1:4 gen: 3 chip-ID: 1038:12aa class-ID: 0300 speed: 8 GT/s
serial: <filter> lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 01:00.1 chip-ID: 10de:228b class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Lenovo driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 05:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-3: SteelSeries ApS Arctis 5 type: USB
driver: hid-generic,snd-usb-audio,usbhid
Sound Server-1: ALSA v: k5.19.7-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.1 running: yes
Sound Server-4: PipeWire v: 0.3.57 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 2000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 vendor: Rivet Networks Killer™
driver: iwlwifi v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 04:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp4s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-4:3
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 3 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 953.87 GiB used: 212.33 GiB (22.3%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: MZVLB1T0HBLR-000L2 size: 953.87 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 3L1QEXF7 temp: 39.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 195.58 GiB size: 191.45 GiB (97.89%) used: 47.31 GiB
(24.7%) fs: ext4 dev: /dev/nvme0n1p5 maj-min: 259:5 label: Manjaro
uuid: 9efecacd-fae6-4ed8-a120-f610bbc9eb3b
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 35.3 MiB
(13.8%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: SYSTEM_DRV
uuid: 9466-7FDD
ID-3: /home/beko raw-size: N/A size: 191.45 GiB used: 47.31 GiB (24.7%)
fs: ecryptfs source: ERR-102
ID-4: /nix raw-size: 130.48 GiB size: 127.37 GiB (97.62%) used: 48.26 GiB
(37.9%) fs: ext4 dev: /dev/nvme0n1p9 maj-min: 259:8 label: nix
uuid: ece59e86-8f89-4f2b-9778-ab99fce86c50
ID-5: /vm raw-size: 166.02 GiB size: 162.35 GiB (97.79%) used: 69.41 GiB
(42.8%) fs: ext4 dev: /dev/nvme0n1p7 maj-min: 259:6 label: VMs
uuid: 6e0d0eec-a232-40df-a7af-255907d7026e
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p11 maj-min: 259:9 size: 46.77 GiB fs: ext4 label: Backup
uuid: dec8cfbb-9478-4a15-b49d-27d99b353e6b
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 122.54 GiB fs: ntfs
label: Windows-SSD uuid: 146C671E6C66F9BE
ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 244.14 GiB fs: ntfs
label: Programy uuid: E078431F7842F436
ID-5: /dev/nvme0n1p8 maj-min: 259:7 size: 1000 MiB fs: ntfs
label: WINRE_DRV uuid: C2C86784C8677597
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-2:2 info: Genesys Logic Hub ports: 3 rev: 2.1 speed: 480 Mb/s
chip-ID: 05e3:0610 class-ID: 0900
Device-1: 1-2.1:4 info: SteelSeries ApS Arctis 5 type: Audio,HID
driver: hid-generic,snd-usb-audio,usbhid interfaces: 6 rev: 2.0
speed: 12 Mb/s power: 250mA chip-ID: 1038:12aa class-ID: 0300
serial: <filter>
Hub-3: 1-2.3:6 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 1a40:0101 class-ID: 0900
Device-1: 1-2.3.1:7 info: ROCCAT Kone XTD Mouse type: Mouse,Keyboard
driver: koneplus,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 200mA
chip-ID: 1e7d:2e22 class-ID: 0300
Device-2: 1-2.3.2:8 info: ROCCAT Suora FX Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 4 rev: 1.1 speed: 12 Mb/s
power: 500mA chip-ID: 1e7d:3246 class-ID: 0300 serial: <filter>
Device-3: 1-3:3 info: Chicony Integrated Camera type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 04f2:b67d class-ID: 0e02
Device-4: 1-4:5 info: Integrated Express ITE Device(8258) type: Keyboard
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 048d:c968 class-ID: 0301
Hub-4: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-5: 2-2:2 info: Genesys Logic GL3523 Hub ports: 3 rev: 3.2
speed: 5 Gb/s chip-ID: 05e3:0620 class-ID: 0900
Hub-6: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-4:3 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Hub-7: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 44.6 C mobo: N/A gpu: amdgpu temp: 39.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 421 Uptime: 2h 49m wakeups: 1 Init: systemd v: 251
default: graphical tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6
Packages: 1407 pm: nix-default pkgs: 0 pm: nix-sys pkgs: 0 pm: nix-usr
pkgs: 72 libs: 13 pm: pacman pkgs: 1335 libs: 351
tools: gnome-software,pamac pm: flatpak pkgs: 0 Shell: Zsh v: 5.9
running-in: gnome-terminal inxi: 3.3.21
brahma
26 September 2022 06:41
4
alojzy.leszcz:
driver: nouveau
you dont have installed the nvidia drivers, you are running on open source drivers, so install the proprietary ones via system settings/manjaro settings/hardware configuration and click on ‘auto install proprietary drivers’sudo mhwd -a pci nonfree 0300
alojzy.leszcz:
Display: wayland server
you are also using wayland, so if you have still issues after installing the nvidia drivers, switch to xorg/x11
6x12
26 September 2022 07:45
5
This guy describes installing arch: Lenovo Legion 7 (2021) and Arch Linux
Hi,
Thanks for the response.
I re-run inxi with NVidia installed (and my external screen being detected, but failing to start):
System:
Kernel: 5.19.7-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.19-x86_64
root=UUID=9efecacd-fae6-4ed8-a120-f610bbc9eb3b rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME v: 42.4 tk: GTK v: 3.24.34 wm: gnome-shell dm: GDM v: 42.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 82N6 v: Legion 7 16ACHg6
serial: <superuser required> Chassis: type: 10 v: Legion 7 16ACHg6
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0T76461 WIN
serial: <superuser required> UEFI: LENOVO v: GKCN49WW date: 11/08/2021
Battery:
ID-1: BAT0 charge: 77.3 Wh (100.0%) condition: 77.3/80.0 Wh (96.6%)
volts: 17.3 min: 15.4 model: Celxpert L20C4PC1 type: Li-poly
serial: <filter> status: full cycles: 99
Memory:
RAM: total: 27.27 GiB used: 3.27 GiB (12.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: AMD Ryzen 7 5800H with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 gen: 4 level: v3 built: 2021-22 process: TSMC n7 (7nm)
family: 0x19 (25) model-id: 0x50 (80) stepping: 0 microcode: 0xA50000C
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 1251 high: 1491 min/max: 1200/4462 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1361 2: 1267
3: 1197 4: 1200 5: 1200 6: 1200 7: 1200 8: 1198 9: 1351 10: 1200 11: 1366
12: 1200 13: 1200 14: 1200 15: 1200 16: 1491 bogomips: 102254
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA104M [GeForce RTX 3070 Mobile / Max-Q] vendor: Lenovo
driver: nvidia v: 515.65.01 alternate: nouveau,nvidia_drm non-free: 515.xx+
status: current (as of 2022-08) arch: Ampere code: GAxxx process: TSMC n7
(7nm) built: 2020-22 pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:24dd class-ID: 0300
Device-2: AMD Cezanne vendor: Lenovo driver: amdgpu v: kernel
arch: GCN-5.1 code: Vega-2 process: TSMC n7 (7nm) built: 2018-21 pcie:
gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports:
active: eDP-1 empty: none bus-ID: 05:00.0 chip-ID: 1002:1638
class-ID: 0300
Device-3: Chicony Integrated Camera type: USB driver: uvcvideo
bus-ID: 1-3:3 chip-ID: 04f2:b67d class-ID: 0e02
Display: x11 server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.3
compositor: gnome-shell driver: X: loaded: amdgpu,nvidia
unloaded: modesetting,nouveau,radeon alternate: fbdev,nv,vesa gpu: amdgpu
display-ID: :1 screens: 1
Screen-1: 0 s-res: 3840x1200 s-size: <missing: xdpyinfo>
Monitor-1: HDMI-1-0 size-res: N/A modes: N/A
Monitor-2: eDP pos: primary res: 1920x1200 hz: 165 dpi: 141
size: 345x215mm (13.58x8.46") diag: 407mm (16") modes: N/A
OpenGL: renderer: AMD RENOIR (LLVM 14.0.6 DRM 3.47 5.19.7-1-MANJARO) v: 4.6
Mesa 22.1.7 direct render: Yes
Audio:
Device-1: NVIDIA GA104 High Definition Audio driver: snd_hda_intel v: kernel
pcie: bus-ID: 1-2.1:4 gen: 3 chip-ID: 1038:12aa speed: 8 GT/s class-ID: 0300
lanes: 8 serial: <filter> link-max: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 01:00.1 chip-ID: 10de:228b class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Lenovo driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 05:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-3: SteelSeries ApS Arctis 5 type: USB
driver: hid-generic,snd-usb-audio,usbhid
Sound Server-1: ALSA v: k5.19.7-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.1 running: yes
Sound Server-4: PipeWire v: 0.3.57 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 2000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 vendor: Rivet Networks Killer™
driver: iwlwifi v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 04:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp4s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-4:2
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 953.87 GiB used: 213.52 GiB (22.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: MZVLB1T0HBLR-000L2 size: 953.87 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 3L1QEXF7 temp: 33.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 195.58 GiB size: 191.45 GiB (97.89%) used: 47.91 GiB
(25.0%) fs: ext4 dev: /dev/nvme0n1p5 maj-min: 259:5 label: Manjaro
uuid: 9efecacd-fae6-4ed8-a120-f610bbc9eb3b
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 35.3 MiB
(13.8%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: SYSTEM_DRV
uuid: 9466-7FDD
ID-3: /home/beko raw-size: N/A size: 191.45 GiB used: 47.91 GiB (25.0%)
fs: ecryptfs source: ERR-102
ID-4: /nix raw-size: 130.48 GiB size: 127.37 GiB (97.62%) used: 48.26 GiB
(37.9%) fs: ext4 dev: /dev/nvme0n1p9 maj-min: 259:8 label: nix
uuid: ece59e86-8f89-4f2b-9778-ab99fce86c50
ID-5: /vm raw-size: 166.02 GiB size: 162.35 GiB (97.79%) used: 69.41 GiB
(42.8%) fs: ext4 dev: /dev/nvme0n1p7 maj-min: 259:6 label: VMs
uuid: 6e0d0eec-a232-40df-a7af-255907d7026e
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p11 maj-min: 259:9 size: 46.77 GiB fs: ext4 label: Backup
uuid: dec8cfbb-9478-4a15-b49d-27d99b353e6b
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 122.54 GiB fs: ntfs
label: Windows-SSD uuid: 146C671E6C66F9BE
ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 244.14 GiB fs: ntfs
label: Programy uuid: E078431F7842F436
ID-5: /dev/nvme0n1p8 maj-min: 259:7 size: 1000 MiB fs: ntfs
label: WINRE_DRV uuid: C2C86784C8677597
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-2:2 info: Genesys Logic Hub ports: 3 rev: 2.1 speed: 480 Mb/s
chip-ID: 05e3:0610 class-ID: 0900
Device-1: 1-2.1:4 info: SteelSeries ApS Arctis 5 type: Audio,HID
driver: hid-generic,snd-usb-audio,usbhid interfaces: 6 rev: 2.0
speed: 12 Mb/s power: 250mA chip-ID: 1038:12aa class-ID: 0300
serial: <filter>
Hub-3: 1-2.3:6 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 1a40:0101 class-ID: 0900
Device-1: 1-2.3.1:7 info: ROCCAT Kone XTD Mouse type: Mouse,Keyboard
driver: koneplus,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 200mA
chip-ID: 1e7d:2e22 class-ID: 0300
Device-2: 1-2.3.2:8 info: ROCCAT Suora FX Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 4 rev: 1.1 speed: 12 Mb/s
power: 500mA chip-ID: 1e7d:3246 class-ID: 0300 serial: <filter>
Device-3: 1-3:3 info: Chicony Integrated Camera type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 04f2:b67d class-ID: 0e02
Device-4: 1-4:5 info: Integrated Express ITE Device(8258) type: Keyboard
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 048d:c968 class-ID: 0301
Hub-4: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-5: 2-2:2 info: Genesys Logic GL3523 Hub ports: 3 rev: 3.2
speed: 5 Gb/s chip-ID: 05e3:0620 class-ID: 0900
Hub-6: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-4:2 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Hub-7: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 38.6 C mobo: N/A gpu: amdgpu temp: 33.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 387 Uptime: 3m wakeups: 1 Init: systemd v: 251 default: graphical
tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: 1414
pm: nix-default pkgs: 0 pm: nix-sys pkgs: 0 pm: nix-usr pkgs: 72 libs: 13
pm: pacman pkgs: 1342 libs: 353 tools: gnome-software,pamac pm: flatpak
pkgs: 0 Shell: Zsh v: 5.9 running-in: gnome-terminal inxi: 3.3.21
Re the article about Arch: that’s what I’ve done.But I’ll double check, thanks for posting.
I’ve just found this post:
monitor-detected-but-black-screen/32391
(Sorry for formatting, but the forum says I can’t add links in my posts)
It’s a bit old, but it says:
The NVIDIA driver currently cannot be used as an output sink when the output source driver is xf86-video-amdgpu.
which makes sense in my case, as I use amdgpu. Do I need to follow the suggestion and use optimus-manager?
EDIT:
I’ve made some progress:
Switched my Graphics card in BIOS to “Discrete” mode.
Installed NVidia drivers.
After reboot both the built-in and the external displays work.
However, the built-in screen operates only in one resolution: 2560x1600, which makes everything too small.
xrandr:
HDMI-0 connected primary 1920x1200+2560+0 (normal left inverted right x axis y axis) 489mm x 298mm
1920x1200 59.95*+
1920x1080 59.94 50.00
1680x1050 59.95
1600x1200 60.00
1600x900 60.00
1280x1024 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 59.94
640x480 59.94
DP-4 connected 2560x1600+0+0 (normal left inverted right x axis y axis) 345mm x 215mm
2560x1600 60.01*+ 165.02
I tried changing the resolution in nvidia-settings and it works, but everything comes back to 2560x1600 after a reboot, despite the fact I saved xorg.conf.
Any idea why does my system show only one resolution for the built-in display?
6x12
27 September 2022 05:26
8
Can you post the output of:mhwd -l && mhwd -li
In the post I linked above the bios settings are described as “GPU MUX Switch (Dedicated + Optimus Graphics)”.
This offered choice will need a decision before you install/setup the driver.
set to ‘dedicated’ run mhwd -l && mhwd -li and
install the offered nvidia (only) driver
or set to optimus/‘dynamic’ run mhwd -l && mhwd -li
install the offered video-hybrid-amd-nvidia-prime optimus driver
In both cases video-nvidia (nouveau) needs to be removed but that seems already have been done. I’m on an intel/nvidia optimus, in a ‘optimus-setup’ my mhwd -l && mhwd -li looks like this:
> 0000:01:00.0 (0302:10de:1392) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-prime 2021.11.04 false PCI
video-hybrid-intel-nvidia-470xx-prime 2021.11.04 false PCI
video-hybrid-intel-nvidia-390xx-bumblebee 2021.11.26 false PCI
video-nvidia 2021.11.04 false PCI
video-nvidia-470xx 2021.11.04 false PCI
video-nvidia-390xx 2021.11.26 false PCI
video-linux 2018.05.04 true PCI
> 0000:00:02.0 (0300:8086:0416) Display controller Intel Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-prime 2021.11.04 false PCI
video-hybrid-intel-nvidia-470xx-prime 2021.11.04 false PCI
video-hybrid-intel-nvidia-390xx-bumblebee 2021.11.26 false PCI
video-linux 2018.05.04 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
> Installed PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-470xx-prime 2021.11.04 false PCI
video-modesetting 2020.01.13 true PCI
brahma
27 September 2022 07:32
9
you should be able to change the scale from system settings, to 200% and see if it looks better
Thanks for the replay.
video-hybrid-amd-nvidia-prime in “dynamic” graphics mode
video-nvidia in “discrete” mode
In the first case I can use only one of my displays (either the one built-in or the external one; seems to be random, which one exactly). In the second case I can only use one resolution (2560x1600) on my built-in screen, which is too small to see things.
Here’s output for mhwd -l && mhwd -li executed in “dynamic” mode:
> 0000:03:00.0 (0200:10ec:8168) Network controller Realtek Semiconductor Co., Ltd.:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
network-r8168 2016.04.20 true PCI
> 0000:01:00.0 (0300:10de:24dd) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-amd-nvidia-prime 2021.11.04 false PCI
video-hybrid-amd-nvidia-470xx-prime 2021.11.04 false PCI
video-nvidia 2021.11.04 false PCI
video-nvidia-470xx 2021.11.04 false PCI
video-linux 2018.05.04 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
> 0000:05:00.0 (0300:1002:1638) Display controller ATI Technologies Inc:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-amd-nvidia-prime 2021.11.04 false PCI
video-hybrid-amd-nvidia-470xx-prime 2021.11.04 false PCI
video-linux 2018.05.04 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
> Installed PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-amd-nvidia-prime 2021.11.04 false PCI
video-linux 2018.05.04 true PCI
Warning: No installed USB configs!
If you can’t see anything concerning, no worries. I think I’ll wait for the new major release of the most popular distros to see if they fix the problem with my card by any chance.
Hi, thanks for the hint.
Hi all,
FYI: I moved my problem to NVidia Dev forum and managed to find answers there.Problems with hybrid NVidia RTX 3070 in Linux - #19 by alojzy.leszcz - Linux - NVIDIA Developer Forums
Many thanks for all the hints. These helped me to move in the right direction.
system
4 October 2022 07:40
13
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
