Kernels installed in /boot and /boot/efi, grub shows only kernels in /boot/efi

Support
, ,
1

As part of the procedure of converting the root filesystem of my computer to btrfs, I chrooted into it and reinstalled grub. Followed this guide: GRUB/Restore the GRUB Bootloader - Manjaro .

I also removed and installed some kernels, using pacman (mhwd-kernel didn’t work in chroot), and did mkinitcpio -P and grub-mkconfig.
Removed two dkms modules that were causing issues, anbox-ashmem and anbox-binder.
More info about how I got in this situation in my previous forum post.

Now, booted into the actual system, new kernel images are installed into /boot, but grub only shows the kernel images located in /boot/efi/.
I am unable to boot from any kernel images apart from the ones located in /boot/efi/

What should I do to restore regular system functions, i.e. boot from the newest installed kernel?

test -d /sys/firmware/efi && echo efi || echo bios
efi

ls -R /boot

cat /etc/default/grub

GRUB_DEFAULT=0
GRUB_TIMEOUT=1
GRUB_TIMEOUT_STYLE=hidden
GRUB_DISTRIBUTOR=“Manjaro”
GRUB_CMDLINE_LINUX_DEFAULT=“quiet splash loglevel=3 sysrq_always_enabled=1 udev.log_priority=3”
GRUB_CMDLINE_LINUX=""

If you want to enable the save default function, uncomment the following

line, and set GRUB_DEFAULT to saved.

#GRUB_SAVEDEFAULT=true

Preload both GPT and MBR modules so that they are not missed

GRUB_PRELOAD_MODULES=“part_gpt part_msdos”

Uncomment to enable booting from LUKS encrypted devices

#GRUB_ENABLE_CRYPTODISK=y

Uncomment to use basic console

GRUB_TERMINAL_INPUT=console

Uncomment to disable graphical terminal

#GRUB_TERMINAL_OUTPUT=console

The resolution used on graphical terminal

note that you can use only modes which your graphic card supports via VBE

you can see them in real GRUB with the command ‘videoinfo’

GRUB_GFXMODE=auto

Uncomment to allow the kernel use the same resolution used by grub

GRUB_GFXPAYLOAD_LINUX=keep

Uncomment if you want GRUB to pass to the Linux kernel the old parameter

format “root=/dev/xxx” instead of “root=/dev/disk/by-uuid/xxx”

#GRUB_DISABLE_LINUX_UUID=true

Uncomment to disable generation of recovery mode menu entries

GRUB_DISABLE_RECOVERY=true

Uncomment this option to enable os-prober execution in the grub-mkconfig command

GRUB_DISABLE_OS_PROBER=false

Uncomment and set to the desired menu colors. Used by normal and wallpaper

modes only. Entries specified as foreground/background.

GRUB_COLOR_NORMAL=“light-gray/black”
GRUB_COLOR_HIGHLIGHT=“green/black”

Uncomment one of them for the gfx desired, a image background or a gfxtheme

#GRUB_BACKGROUND="/usr/share/grub/background.png"
GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"

Uncomment to get a beep at GRUB start

#GRUB_INIT_TUNE=“480 440 1”

Uncomment to ensure that the root filesystem is mounted read-only so that

systemd-fsck can run the check automatically. We use ‘fsck’ by default, which

needs ‘rw’ as boot parameter, to avoid delay in boot-time. ‘fsck’ needs to be

removed from ‘mkinitcpio.conf’ to make ‘systemd-fsck’ work.

See also Arch-Wiki: fsck - ArchWiki

#GRUB_ROOT_FS_RO=true

inxi -Fazy

System:
Kernel: 5.10.70-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/vmlinuz-5.10-x86_64
root=UUID=ea10f93b-0ef1-4889-80e9-b0ca11f6999f rw rootflags=subvol=root
quiet splash loglevel=3 sysrq_always_enabled=1 udev.log_priority=3
Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Notebook product: P95xER v: N/A serial: N/A
Chassis: No Enclosure type: 10 serial: N/A
Mobo: Notebook model: P95xER serial: N/A UEFI: American Megatrends
v: 1.07.15 date: 11/16/2018
Battery:
ID-1: BAT0 charge: 45.4 Wh (89.4%) condition: 50.8/53.2 Wh (95.4%)
volts: 16.6 min: 15.2 model: Notebook BAT type: Li-ion serial:
status: Unknown
CPU:
Info: 6-Core model: Intel Core i7-8750H socket: BGA1440 (U3E1) note: check
bits: 64 type: MT MCP arch: Kaby Lake note: check family: 6
model-id: 9E (158) stepping: A (10) microcode: 9A cache: L1: 384 KiB
L2: 9 MiB L3: 9 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 52815
Speed: 800 MHz min/max: 800/4100 MHz base/boost: 2079/8300 volts: 0.8 V
ext-clock: 100 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 5: 800
6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: CLEVO/KAPOK
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3e9b class-ID: 0300
Device-2: NVIDIA GP104M [GeForce GTX 1070 Mobile] vendor: CLEVO/KAPOK
driver: nouveau v: kernel bus-ID: 01:00.0 chip-ID: 10de:1ba1 class-ID: 0300
Device-3: Chicony Chicony USB 2.0 Camera type: USB driver: uvcvideo
bus-ID: 1-8:3 chip-ID: 04f2:b5a7 class-ID: 0e02
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver:
loaded: modesetting display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 676x380mm (26.6x15.0")
s-diag: 775mm (30.5")
Monitor-1: eDP-1 res: 2560x1440 hz: 60 dpi: 188 size: 345x194mm (13.6x7.6")
diag: 396mm (15.6")
OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 21.2.3
direct render: Yes
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: CLEVO/KAPOK
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci
bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
Device-2: NVIDIA GP104 High Definition Audio driver: snd_hda_intel v: kernel
bus-ID: 01:00.1 chip-ID: 10de:10f0 class-ID: 0403
Sound Server-1: ALSA v: k5.10.70-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 1.9.19 running: no
Sound Server-4: PulseAudio v: 15.0 running: no
Sound Server-5: PipeWire v: 0.3.38 running: no
Network:
Device-1: Intel Wireless-AC 9260 vendor: Rivet Networks driver: iwlwifi
v: kernel port: 4000 bus-ID: 03:00.0 chip-ID: 8086:2526 class-ID: 0280
IF: wlp3s0 state: up mac:
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: CLEVO/KAPOK driver: r8169 v: kernel port: 3000 bus-ID: 04:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp4s0 state: down mac:
Bluetooth:
Device-1: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb
v: 0.8 bus-ID: 1-14:5 chip-ID: 8087:0025 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Drives:
Local Storage: total: 2.05 TiB used: 260.45 GiB (12.4%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 960 EVO 250GB
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: rev: 3B7QCXE7 temp: 36.9 C scheme: GPT
SMART: yes health: PASSED on: 169d 19h cycles: 2,095
read-units: 22,961,369 [11.7 TB] written-units: 32,327,264 [16.5 TB]
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000LX001-1RG174
family: FireCuda 2.5 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: HDD rpm: 5400
serial: rev: SDM1 temp: 37 C
SMART: yes state: enabled health: PASSED on: 275d 5h cycles: 2094
read: 27.35 TiB written: 7.67 TiB Pre-Fail: reallocated sector: 100
threshold: 36 attribute: Spin_Retry_Count value: 100 worst: 100
threshold: 97
Partition:
ID-1: / raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 87.77 GiB (37.7%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 63.4 MiB (21.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
maj-min: 259:1
ID-3: /home raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 172.62 GiB (9.3%) fs: btrfs block-size: 4096 B dev: /dev/sda
maj-min: 8:0
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 57.0 C mobo: N/A gpu: nouveau temp: 40.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 331 Uptime: 3h 25m wakeups: 2 Memory: 31.21 GiB
used: 3.63 GiB (11.6%) Init: systemd v: 249 tool: systemctl Compilers:
gcc: 11.1.0 alt: 10 clang: 12.0.1 Packages: 1873 pacman: 1863 lib: 453
flatpak: 10 Shell: Bash (su) v: 5.1.8 running-in: yakuake inxi: 3.3.06

efibootmgr -v

BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,0006,0000
Boot0000* Windows Boot Manager VenHw(99e275e7-75a0-4b37-a2e6-c5385e6c00cb)WINDOWS…x…B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}…u…
Boot0001* manjaro HD(1,GPT,dd2eae74-f0b5-a041-a448-763d2bcf8fa8,0x1000,0x96000)/File(\EFI\manjaro\grubx64.efi)
Boot0006* UEFI OS HD(1,GPT,dd2eae74-f0b5-a041-a448-763d2bcf8fa8,0x1000,0x96000)/File(\EFI\BOOT\BOOTX64.EFI)…BO

2

The system had a sudden, apparently random, hard poweroff today. I’ve read a few forum posts elsewhere stating it’s a regular problem for this laptop model.
After powering on again, it now runs the newest installed kernel, 5.14 :thinking:

The 5.10 kernel still resides in /boot/efi/, and the 5.14 kernel still resides in /boot/.

I will mark this topic as solved if the issue doesn’t reappear until tomorrow night.

journalctl -b -0 | tail -n 100

okt. 11 19:20:36 jacob-p950er sudo[9457]: jacob : TTY=pts/2 ; PWD=/home/jacob ; USER=root ; COMMAND=/usr/bin/dmesg
okt. 11 19:20:36 jacob-p950er audit[9457]: USER_START pid=9457 uid=1000 auid=1000 ses=2 msg=‘op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct=“root
" exe=”/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/2 res=success’
okt. 11 19:20:36 jacob-p950er sudo[9457]: pam_unix(sudo:session): session opened for user root(uid=0) by jacob(uid=1000)
okt. 11 19:20:36 jacob-p950er kernel: audit: type=1101 audit(1633972836.771:152): pid=9457 uid=1000 auid=1000 ses=2 msg=‘op=PAM:accounting grantors=pam_unix,pam_pe
rmit,pam_time acct=“jacob” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/2 res=success’
okt. 11 19:20:36 jacob-p950er kernel: audit: type=1110 audit(1633972836.771:153): pid=9457 uid=1000 auid=1000 ses=2 msg=‘op=PAM:setcred grantors=pam_faillock,pam_p
ermit,pam_faillock acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/2 res=success’
okt. 11 19:20:36 jacob-p950er kernel: audit: type=1105 audit(1633972836.771:154): pid=9457 uid=1000 auid=1000 ses=2 msg=‘op=PAM:session_open grantors=pam_limits,pa
m_unix,pam_permit acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/2 res=success’
okt. 11 19:20:36 jacob-p950er sudo[9457]: pam_unix(sudo:session): session closed for user root
okt. 11 19:20:36 jacob-p950er audit[9457]: USER_END pid=9457 uid=1000 auid=1000 ses=2 msg=‘op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct=“root”
exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/2 res=success’
okt. 11 19:20:36 jacob-p950er audit[9457]: CRED_DISP pid=9457 uid=1000 auid=1000 ses=2 msg=‘op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct=“root
" exe=”/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/2 res=success’
okt. 11 19:20:36 jacob-p950er kernel: audit: type=1106 audit(1633972836.784:155): pid=9457 uid=1000 auid=1000 ses=2 msg=‘op=PAM:session_close grantors=pam_limits,p
am_unix,pam_permit acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/2 res=success’
okt. 11 19:20:36 jacob-p950er kernel: audit: type=1104 audit(1633972836.784:156): pid=9457 uid=1000 auid=1000 ses=2 msg=‘op=PAM:setcred grantors=pam_faillock,pam_p
ermit,pam_faillock acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/2 res=success’
okt. 11 19:20:38 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:39 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:41 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:44 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:51 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:53 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:54 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:56 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:57 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:20:59 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:02 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:03 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:12 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:15 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:17 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:20 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:21 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:30 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:32 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:33 jacob-p950er dbus-daemon[529]: [system] Activating via systemd: service name=‘org.freedesktop.locale1’ unit=‘dbus-org.freedesktop.locale1.service’
requested by ‘:1.192’ (uid=1000 pid=9651 comm=“pamac checkupdates -q --refresh-tmp-files-dbs --us”)
okt. 11 19:21:33 jacob-p950er audit: BPF prog-id=38 op=LOAD
okt. 11 19:21:33 jacob-p950er audit: BPF prog-id=39 op=LOAD
okt. 11 19:21:33 jacob-p950er audit: BPF prog-id=40 op=LOAD
okt. 11 19:21:33 jacob-p950er systemd[1]: Starting Locale Service…
okt. 11 19:21:33 jacob-p950er kernel: audit: type=1334 audit(1633972893.059:157): prog-id=38 op=LOAD
okt. 11 19:21:33 jacob-p950er kernel: audit: type=1334 audit(1633972893.059:158): prog-id=39 op=LOAD
okt. 11 19:21:33 jacob-p950er kernel: audit: type=1334 audit(1633972893.059:159): prog-id=40 op=LOAD
okt. 11 19:21:33 jacob-p950er dbus-daemon[529]: [system] Successfully activated service ‘org.freedesktop.locale1’
okt. 11 19:21:33 jacob-p950er systemd[1]: Started Locale Service.
okt. 11 19:21:33 jacob-p950er audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-localed comm=“systemd” exe="/usr/lib/systemd/sys
temd" hostname=? addr=? terminal=? res=success’
okt. 11 19:21:33 jacob-p950er kernel: audit: type=1130 audit(1633972893.102:160): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-localed comm=“system
d” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
okt. 11 19:21:35 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:41 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:42 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:44 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:48 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:50 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:54 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:56 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:57 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:21:59 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:00 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:02 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:03 jacob-p950er systemd[1]: systemd-localed.service: Deactivated successfully.
okt. 11 19:22:03 jacob-p950er audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-localed comm=“systemd” exe="/usr/lib/systemd/syst
emd" hostname=? addr=? terminal=? res=success’
okt. 11 19:22:03 jacob-p950er kernel: audit: type=1131 audit(1633972923.138:161): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-localed comm=“system
d” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
okt. 11 19:22:03 jacob-p950er audit: BPF prog-id=40 op=UNLOAD
okt. 11 19:22:03 jacob-p950er audit: BPF prog-id=39 op=UNLOAD
okt. 11 19:22:03 jacob-p950er audit: BPF prog-id=38 op=UNLOAD
okt. 11 19:22:03 jacob-p950er kernel: audit: type=1334 audit(1633972923.238:162): prog-id=40 op=UNLOAD
okt. 11 19:22:03 jacob-p950er kernel: audit: type=1334 audit(1633972923.238:163): prog-id=39 op=UNLOAD
okt. 11 19:22:03 jacob-p950er kernel: audit: type=1334 audit(1633972923.238:164): prog-id=38 op=UNLOAD
okt. 11 19:22:03 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:05 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:12 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:14 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:15 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:17 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:18 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:21 jacob-p950er plasmashell[864]: qml: temp unit: 0
okt. 11 19:22:23 jacob-p950er plasmashell[864]: qml: temp unit: 0

inxi -Fazy

System:
Kernel: 5.14.10-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/root/boot/vmlinuz-5.14-x86_64
root=UUID=ea10f93b-0ef1-4889-80e9-b0ca11f6999f rw rootflags=subvol=root
quiet splash loglevel=3 sysrq_always_enabled=1 udev.log_priority=3
Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Notebook product: P95xER v: N/A serial:
Chassis: No Enclosure type: 10 serial:
Mobo: Notebook model: P95xER serial: UEFI: American Megatrends
v: 1.07.15 date: 11/16/2018
Battery:
ID-1: BAT0 charge: 45.8 Wh (89.6%) condition: 51.1/53.2 Wh (96.1%)
volts: 16.6 min: 15.2 model: Notebook BAT type: Li-ion serial:
status: Unknown
CPU:
Info: 6-Core model: Intel Core i7-8750H bits: 64 type: MT MCP
arch: Kaby Lake note: check family: 6 model-id: 9E (158) stepping: A (10)
microcode: EA cache: L2: 9 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 52815
Speed: 893 MHz min/max: 800/4100 MHz Core speeds (MHz): 1: 893 2: 900 3: 868
4: 890 5: 894 6: 864 7: 898 8: 891 9: 887 10: 866 11: 883 12: 886
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: CLEVO/KAPOK
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3e9b class-ID: 0300
Device-2: NVIDIA GP104M [GeForce GTX 1070 Mobile] vendor: CLEVO/KAPOK
driver: nouveau v: kernel bus-ID: 01:00.0 chip-ID: 10de:1ba1 class-ID: 0300
Device-3: Chicony Chicony USB 2.0 Camera type: USB driver: uvcvideo
bus-ID: 1-8:2 chip-ID: 04f2:b5a7 class-ID: 0e02
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver:
loaded: modesetting display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 676x380mm (26.6x15.0")
s-diag: 775mm (30.5")
Monitor-1: eDP-1 res: 2560x1440 hz: 60 dpi: 188 size: 345x194mm (13.6x7.6")
diag: 396mm (15.6")
OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 21.2.3
direct render: Yes
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: CLEVO/KAPOK
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
Device-2: NVIDIA GP104 High Definition Audio driver: snd_hda_intel v: kernel
bus-ID: 01:00.1 chip-ID: 10de:10f0 class-ID: 0403
Sound Server-1: ALSA v: k5.14.10-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 1.9.19 running: no
Sound Server-4: PulseAudio v: 15.0 running: no
Sound Server-5: PipeWire v: 0.3.38 running: yes
Network:
Device-1: Intel Wireless-AC 9260 vendor: Rivet Networks driver: iwlwifi
v: kernel port: 4000 bus-ID: 03:00.0 chip-ID: 8086:2526 class-ID: 0280
IF: wlp3s0 state: up mac:
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: CLEVO/KAPOK driver: r8169 v: kernel port: 3000 bus-ID: 04:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp4s0 state: down mac:
Bluetooth:
Device-1: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb
v: 0.8 bus-ID: 1-14:4 chip-ID: 8087:0025 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Drives:
Local Storage: total: 2.05 TiB used: 262.27 GiB (12.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 960 EVO 250GB
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: rev: 3B7QCXE7 temp: 35.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000LX001-1RG174
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 5400 serial: rev: SDM1
Partition:
ID-1: / raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
used: 88.41 GiB (38.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 63.4 MiB (21.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 173.8 GiB (9.3%) fs: btrfs dev: /dev/sda maj-min: 8:0
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 53.0 C mobo: N/A gpu: nouveau temp: 38.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 355 Uptime: 2h 58m wakeups: 2 Memory: 31.21 GiB
used: 5.28 GiB (16.9%) Init: systemd v: 249 tool: systemctl Compilers:
gcc: 11.1.0 alt: 10 clang: 12.0.1 Packages: 1876 pacman: 1866 lib: 454
flatpak: 10 Shell: Bash v: 5.1.8 running-in: yakuake inxi: 3.3.06

3

A possibly related issue has shown itself, so I’ll keep this post open. sudo iotop no longer displays swap or IO for any processes. I tried both yakuake and konsole.

This error message is displayed:
CONFIG_TASK_DELAY_ACCT not enabled in kernel, cannot determine SWAPIN and IO % 20 be/4 root 0.00 B/s 0.00 B/s ?unavailable? [cpuhp/1]

The process names(?) in [square brackets] change sporadically.

screenshot of yakuake:

iotop_noSwap_noIO
iotop_noSwap_noIO1998×519 96.8 KB

4

Please do not post screenshots of text:

1 Like
5

I posted a screenshot of the application as well as a the error message in question to better illustrate what was going on.
Will refrain from doing so in the future.

6

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.