You need to follow the right steps and flash android image using usb burning tool.
Maybe you can press and hold reset key which is either on the sides or the bottom
If you connect cable into otg usb-A to Usb-A when thr burning tool is opened and ready to flash then it should automatically detect the device.
It just can not be detectedâŚI wiped out all the data in EMMC using GParted in SDCardâs manjaro system(also tried not format the EMMC and format to EXT4, nothing different)
Are you using the Burning tool windows application? I have tested it many times and it have always worked fine with or without anything on eMMC.
Please follow these steps:
These are the steps in Official Tutorial and have always works for me. If it doesnât work for you then please check if the USB-A to USB-A cable is functional, the Windows pc have the right drivers needed.
Good Luck.
Unfortunately, I follow the Official Tutorial and tried more than ten times(include USB Cable Flash and SD Card Flash), but still canât recognize my device. It can be recognized before I flashed Manjaro into the emmc. I donât know if it is caused by the loss of recovery or other errors.
Is there anyway to flash the Android OS into EMMC from SD Cardâs Manjaro system?
No we donât have flashable Android image.
You should try pressing and holding reset key or maskrom key when connecting the power button for it to enter into recovery mode from where you can flash Android using burning tool.
Are you using Windows 10 ? I had issues getting it detected in burning tool too.
Yes I use Windows 10 20H2 Version.
And this is how I do with them⌠Just nothing happen
Does it make usb connection sound?
If not then either your cable or USB port have a problem, even when device is not in recovery mode it will establish a usb connection with the host pc.
Try a different cable or different port.
Another then this i donât have any other option.
Noďźbut it used have the sound (before I flash the Manjaro into EMMC), I will try another USB Cable this afternoon, I think itâs not the USB Portâs problem because Iâve tried the same operation in 3 different PC.
Update: Still no usb connection sound after new USB Cable connected. I will try last time when I go home with my old Computer, If still doesnât work, It may be that there is a problem with the USB Port(OTG) of the machine itself
PS: Finally!!! I tried power cable and usb cable plugin-in, and still press the reset Btn, it make sound!!!
Thx for @spikerguy 's Help!! Thx everyone!
Hi all,
i tried to install manjaro arm xfce vim3 for my tv boxes, HG680P and Polytron PDBF2 , amlogic s905X
i use meson-gxl-p212.dtb
its work fine on armbian before
but im facing the problem on firstboot
i got error âfailed to start light display manager see systemctl status lightdm.serviceâ
i try enter tty console and run command âsystemctl status lightdm.serviceâ
give me
Lightdm.service - Light Display Manager
Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Thu 2020-10-04 01:13:17 WIB; 33 min ago
Docs: man:lightdm(1)
Process: 769 ExecStart=/usr.bin/lightdm (code=exited, status=1/Failure)
Main PID: 769 (code=exited, status=1/Failure)
oct 04 01 01:13:17 pep systemd[1]: lightdm.service: Scheduled restart job, restart counter is at 5.
oct 04 01 01:13:17 pep systemd[1]: Stopped Light Display Manager.
oct 04 01 01:13:17 pep systemd[1]: lightdm.service: Start request repeated too quickly.
oct 04 01 01:13:17 pep systemd[1]: lightdm.service: Failed with result âexit-codeâ.
oct 04 01 01:13:17 pep systemd[1]: Failed to start Light Display Manager
i got some problen on both devices and both image (Vim2, Vim3)
recently i tried vim1 without any succes, never got boot setup
any solution?
its first time i use manjaro and still understanding linux os
No idea about this, the same images are working fine on their respective boards.
I cannot think of something that would be causing the lightdm to stop.
Currently Iâve been super busy in my day job and will be busy in the coming weeks so I wonât be able to reply fast.
Maybe someone who have a similar board can try it for you.
Hi,
I have tried both files meson-g12a-sei510.dtb and meson-sm1-sei610.dtb on my A95X F3 Air (S905X3) tv box.
www aliexpress com/i/4000298674631.html
But it does not work, hold the reset button, and no booting from SD card at all. no picture in the monitor. any one got it working before?
I do not have much experience with sm1 boards maybe @TheMojoMan or @dante6913 can advice something
What is the kernel that you are using?
Did you tried the for_linux-vim-5101.tar â ĐŻĐ˝Đ´ĐľĐşŃ ĐиŃĐş u-boot.ext?
Hi and thank you for all the hard work.
I still have a few questions.
It works on most Amlogic SoCs as it does for CoreElec I guess?
Is the system stable and usable on a daily basis? And are there any limitations?
In the list above I donât see the Minix U22-XJ, does that mean it doesnât work on it? And among all the Android boxes with SoC S922X (AM6 Plus, GT-King Pro etc âŚ) which do you think is the fastest and works the best?
Thank you .
Hello and welcome to the forum,
Depends on what you want to do with ur.
Limitation: gpu support is not stable yet.
There is no vpu support so all video playback is over software acceleration.
Technically it should work but it is not tested so cannot confirm anything until you try it.
Most are same just a little difference in ram and emmc speed doesnât really make much if a difference.
Good luck.
Update: Download link changed to Manjaro Arm 21.02 image
Booted on A95X F3 Air using sei610 dtb after 3 reboots
Hmm, wifi and sound doesnât work. Any idea how to fix?
I tried using A95X F3 Air mainline dtb from LibreElec, but didnât help
F3 likely has mt7664 wifi, forget about it working in near future. Ethernet and sound may work.
Share aplay - l output
Mine X96 Max Plus (S905X3) with Manjaro Arm 20.12 Mate, Kernel 5.10.8-1, glmark2 2014.03 Score: 167
Already tried latest Release 21, but seems the GL renderer fall back to llvmpipe and much lower glmark2 score. (<80)
Please kindly advise where can download/rollback to past kernel Linux-Vim-5.10.8-1-aarch64.pkg.tar.xz ( & tar.xz.sig ) ?