Gologin Install

I have downloaded the file from gologin website.

System:
  Kernel: 5.15.25-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/vmlinuz-5.15-x86_64
    root=UUID=42afc5bd-6b47-4b00-a928-fe64c89408c6 rw quiet apparmor=1
    security=apparmor resume=UUID=4f624507-5959-4d4f-b32e-b241e784db39
    udev.log_priority=3
  Desktop: KDE Plasma 5.24.2 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASRock model: B550 Phantom Gaming 4/ac
    serial: <superuser required> BIOS: American Megatrends LLC. v: P2.10
    date: 08/02/2021
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 70.6 GiB used: 12.62 GiB (17.9%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3
    family: 0x19 (25) model-id: 0x21 (33) stepping: 0 microcode: 0xA201016
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
    L3: 32 MiB desc: 1x32 MiB
  Speed (MHz): avg: 3090 high: 3872 min/max: 2200/4850 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 3207 2: 2931
    3: 2798 4: 2661 5: 2869 6: 2864 7: 2874 8: 3592 9: 2898 10: 2907 11: 2885
    12: 3707 13: 3872 14: 2902 15: 2873 16: 3602 bogomips: 121415
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
    f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs
    invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor
    movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw
    overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core
    perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt pse pse36 rapl rdpid
    rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep
    ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall
    tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vaes vgif
    vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt xgetbv1 xsave xsavec
    xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
    IBRS_FW, STIBP: always-on, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GA106 [GeForce RTX 3060] vendor: eVga.com. driver: nvidia
    v: 510.54 alternate: nouveau,nvidia_drm pcie: gen: 2 speed: 5 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 05:00.0 chip-ID: 10de:2503
    class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.3 compositor: kwin_x11 driver: X:
    loaded: nvidia gpu: nvidia display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3840x1080 s-dpi: 81 s-size: 1204x343mm (47.4x13.5")
    s-diag: 1252mm (49.3")
  Monitor-1: DP-1 pos: right res: 1920x1080 hz: 75 dpi: 82
    size: 598x336mm (23.5x13.2") diag: 686mm (27")
  Monitor-2: HDMI-0 pos: primary,left res: 1920x1080 hz: 60 dpi: 80
    size: 609x349mm (24.0x13.7") diag: 702mm (27.6")
  OpenGL: renderer: NVIDIA GeForce RTX 3060/PCIe/SSE2 v: 4.6.0 NVIDIA 510.54
    direct render: Yes
Audio:
  Device-1: NVIDIA vendor: eVga.com. driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 05:00.1 chip-ID: 10de:228e
    class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASRock
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 07:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-3: Corsair VIRTUOSO SE USB Gaming Headset type: USB
    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-6:11 chip-ID: 1b1c:0a3d
    class-ID: 0300 serial: <filter>
  Sound Server-1: ALSA v: k5.15.25-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.47 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASRock driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
    port: f000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Intel Dual Band Wireless-AC 3168NGW [Stone Peak] driver: iwlwifi
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 04:00.0
    chip-ID: 8086:24fb class-ID: 0280
  IF: wlp4s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel Wireless-AC 3168 Bluetooth type: USB driver: btusb v: 0.8
    bus-ID: 1-9:3 chip-ID: 8087:0aa7 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 953.87 GiB used: 52.29 GiB (5.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SDSSDH3 1T02
    size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 1000 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 100 GiB size: 97.87 GiB (97.87%) used: 18.51 GiB (18.9%)
    fs: ext4 dev: /dev/sda4 maj-min: 8:4 label: N/A
    uuid: 42afc5bd-6b47-4b00-a928-fe64c89408c6
  ID-2: /boot raw-size: 512 MiB size: 511 MiB (99.80%)
    used: 63.3 MiB (12.4%) fs: vfat dev: /dev/sda2 maj-min: 8:2 label: NO_LABEL
    uuid: 9D8E-5753
  ID-3: /home raw-size: 803.36 GiB size: 789.68 GiB (98.30%)
    used: 33.72 GiB (4.3%) fs: ext4 dev: /dev/sda5 maj-min: 8:5 label: N/A
    uuid: 7695ca94-9e3a-4b3e-8afc-459b963b37ea
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 50 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/sda3 maj-min: 8:3 label: N/A
    uuid: 4f624507-5959-4d4f-b32e-b241e784db39
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 8 MiB fs: <superuser required> label: N/A
    uuid: N/A
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 10 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-4:10 info: Corsair VIRTUOSO SE Wireless Gaming Headset
    type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s
    power: 500mA chip-ID: 1b1c:0a46 class-ID: 0300 serial: <filter>
  Device-2: 1-6:11 info: Corsair VIRTUOSO SE USB Gaming Headset
    type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 5
    rev: 2.0 speed: 12 Mb/s power: 500mA chip-ID: 1b1c:0a3d class-ID: 0300
    serial: <filter>
  Device-3: 1-9:3 info: Intel Wireless-AC 3168 Bluetooth type: Bluetooth
    driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
    chip-ID: 8087:0aa7 class-ID: e001
  Device-4: 1-10:4 info: ASRock LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s
    power: 100mA chip-ID: 26ce:01a2 class-ID: 0300 serial: <filter>
  Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-1:2 info: Razer USA BlackWidow V3 Pro type: Keyboard,Mouse
    driver: hid-generic,usbhid interfaces: 4 rev: 2.0 speed: 12 Mb/s
    power: 500mA chip-ID: 1532:025a class-ID: 0300
  Hub-4: 3-4:3 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s
    chip-ID: 045b:0209 class-ID: 0900
  Hub-5: 3-4.1:4 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s
    chip-ID: 045b:0209 class-ID: 0900
  Device-1: 3-4.1.1:5
    info: Razer USA Gaming Mouse [Basilisk Ultimate Wireless Receiver]
    type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 3 rev: 2.0
    speed: 12 Mb/s power: 500mA chip-ID: 1532:0088 class-ID: 0300
  Hub-6: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-7: 4-4:2 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s
    chip-ID: 045b:0210 class-ID: 0900
  Hub-8: 4-4.1:3 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s
    chip-ID: 045b:0210 class-ID: 0900
Sensors:
  System Temperatures: cpu: N/A mobo: N/A gpu: nvidia temp: 46 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Info:
  Processes: 388 Uptime: 11h 35m wakeups: 0 Init: systemd v: 250
  tool: systemctl Compilers: gcc: 11.2.0 clang: 13.0.1 Packages: 1422
  pacman: 1403 lib: 390 flatpak: 9 snap: 10 Shell: Zsh v: 5.8.1 default: Bash
  v: 5.1.16 running-in: konsole inxi: 3.3.13

How would i continue to install it properly?

How to increase your chances of solving your issue:

Please provide Information:

I dont know if these are relevant to my current problem or if i should address it here if not please let me know. I think I see issues listed.

Mar 07 13:50:30 Omnibeast kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled
Mar 07 13:50:30 Omnibeast kernel: usb 3-2: device descriptor read/64, error -71
Mar 07 13:50:30 Omnibeast kernel: 
Mar 07 13:50:30 Omnibeast kernel: usb 3-2: device descriptor read/64, error -71
Mar 07 13:50:31 Omnibeast kernel: usb 3-2: device descriptor read/64, error -71
Mar 07 13:50:31 Omnibeast kernel: usb 3-2: device descriptor read/64, error -71
Mar 07 13:50:32 Omnibeast kernel: usb 3-2: device not accepting address 5, error -71
Mar 07 13:50:32 Omnibeast kernel: usb 3-2: device not accepting address 6, error -71
Mar 07 13:50:32 Omnibeast kernel: usb usb3-port2: unable to enumerate USB device
Mar 07 13:51:36 Omnibeast systemd-coredump[1798]: Process 1147 (nordpass) of user 1000 dumped core.
                                                  
                                                  Module /snap/nordpass/128/gnome-platform/usr/lib/x86_64-linux-gnu/libX11-xcb.so.1.0.0 with build-id 059afb70fcacfe4e78461d10cd18c886b1a1e61a
                                                  Module /snap/nordpass/128/gnome-platform/usr/lib/x86_64-linux-gnu/libwayland-egl.so.1.0.0 with build-id 6087d2e0157b21c0da46960d7275eef6dfa8c7bf
                                                  Module /lib/x86_64-linux-gnu/libc-2.27.so with build-id ce450eb01a5e5acc7ce7b8c2633b02cc1093339e
                                                  Module /lib/x86_64-linux-gnu/libpthread-2.27.so with build-id 68f36706eb2e6eee4046c4fdca2a19540b2f6113
                                                  Module ld-linux-x86-64.so.2 with build-id 977c39fe87abfa426d3043f6c8e21f7be3f0e876
                                                  Module linux-vdso.so.1 with build-id c92da1914b8d8df59d1e5784659d5e3558731667
                                                  Module keytar.node with build-id 55daab44f6e765229cacfbf0e02b9fad32b3fe41
                                                  Module libkeyutils.so.1 with build-id f463e107b099910463bc32e837c73d341a52c27b
                                                  Module libbsd.so.0 with build-id 9e1246113ee06eb9ea00931d71c142e7387d034a
                                                  Module libcom_err.so.2 with build-id c0cb7e35a4566a443f99dfbc1a54d3a0677c8a10
                                                  Module libplds4.so with build-id 64e1ba5c0c1afed0f5770c1b91e8113792ba7fd6
                                                  Module libplc4.so with build-id 12a25d77902bfa086d0143f1406268107b4fa68f
                                                  Module libexpat.so.1 with build-id 600da1ad8422d35085a2a410735cd67fcaf8cc29
                                                  Module libdbus-1.so.3 with build-id c163c9bb03410c4c05458a989a804ff527d4f63f
                                                  Module libnspr4.so with build-id 19f69293ad4719543fb9f17f98684e62deb3308f
                                                  Module libsmime3.so with build-id a08e74d9aa4dc558dc8167df6fda8dd32e824fdc
                                                  Module libnssutil3.so with build-id adf63b789b64c34c8057aa333ad1729d95ef3b4f
                                                  Module libnss3.so with build-id 34759987b7e827d978bd8f06fde70d2c5e3a79fa
                                                  Module libffmpeg.so with build-id d4aab0a51d28bbc3ab1aec6c0745f0b7b1f32638
                                                  Module nordpass with build-id 17be10f23f85f57671bfb21ecf8c105a64ab6ef1
                                                  Stack trace of thread 1619:
                                                  #0  0x00007f59a6140426 n/a (/lib/x86_64-linux-gnu/libc-2.27.so + 0xb1426)
                                                  ELF object binary architecture: AMD x86-64
░░ Subject: Process 1147 (nordpass) dumped core
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ Documentation: man:core(5)
░░ 
░░ Process 1147 (nordpass) crashed and dumped core.
░░ 
░░ This usually indicates a programming error in the crashing program and
░░ should be reported to its vendor as a bug.
Mar 07 15:02:49 Omnibeast pulseaudio[1002]: org.freedesktop.DBus.Properties.Get /org/bluez/hci0/dev_54_15_89_37_76_28/sep1/fd0 Volume failed: org.freedesktop.DBus.Error.InvalidArgs: No such property 'Volume'
Mar 07 15:13:22 Omnibeast kernel: ntfs3: Unknown parameter 'windows_names'
Mar 07 15:19:14 Omnibeast kernel: ntfs3: Unknown parameter 'windows_names'
Mar 07 15:19:33 Omnibeast kernel: usb 2-2: cmd cmplt err -108
Mar 07 15:19:33 Omnibeast kernel: usb 2-2: cmd cmplt err -108
Mar 07 15:19:33 Omnibeast kernel: blk_update_request: I/O error, dev sdb, sector 500103040 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Mar 07 15:19:33 Omnibeast kernel: blk_update_request: I/O error, dev sdb, sector 500103040 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Mar 07 15:19:33 Omnibeast kernel: Buffer I/O error on dev sdb1, logical block 62512624, async page read
Mar 07 16:38:40 Omnibeast kernel: sd 6:0:0:0: [sdb] No Caching mode page found
Mar 07 16:38:40 Omnibeast kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Mar 07 16:41:06 Omnibeast kernel: sd 7:0:0:0: [sdc] No Caching mode page found
Mar 07 16:41:06 Omnibeast kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Mar 07 16:43:47 Omnibeast kernel: ntfs3: Unknown parameter 'windows_names'
Mar 07 17:04:34 Omnibeast kernel: ntfs3: Unknown parameter 'windows_names'
Mar 07 17:07:42 Omnibeast kernel: ntfs3: Unknown parameter 'windows_names'
Mar 07 17:13:17 Omnibeast kernel: FAT-fs (sdb1): Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
Mar 07 17:18:38 Omnibeast kernel: ntfs3: Unknown parameter 'windows_names'
Mar 07 18:06:47 Omnibeast kernel: ntfs3: Unknown parameter 'windows_names'
Mar 07 18:07:59 Omnibeast kernel: ntfs3: Unknown parameter 'windows_names'
Mar 07 18:26:22 Omnibeast systemd[16783]: Failed to start Update XDG user dir configuration.
░░ Subject: A start job for unit UNIT has failed
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ 
░░ A start job for unit UNIT has finished with a failure.
░░ 
░░ The job identifier is 25 and the job result is failed.
Mar 07 18:48:35 Omnibeast systemd-logind[701]: Failed to start autovt@tty2.service: Transaction for getty@tty2.service/start is destructive (shutdown.target has 'start' job queued, but 'stop' is included in transaction).
Mar 07 18:48:35 Omnibeast pulseaudio[1002]: Lost I/O connection in module "module-gsettings"

@BeastOnEm I am able to launch gologin without any issues. Install .tar file from gologin official website and extract it. Then try launching it with ~/Downloads/GoLogin-2.1.8 (modify command accordingly). If that works then you can put the binary in ~/local/bin. Go through the project’s readme to understand more.

Screenshot

Thank you for getting back to me so quickly I tried that and it worked. Goes to show how much i need to learn about linux. So that .tar file extracted is the program in a sense? and the command ~ tells it to run? sorry im just trying to understand.