This issue was reported allready, but no answers. Do i have to worry about this?
I have auto-login activated and no probs so far with lightdm.
I think this message is new for some month.
journalctl -b -p err
[john1@manjaro ~]$ journalctl -b -p err
Aug 09 14:06:03 manjaro kernel: Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
Aug 09 14:06:03 manjaro kernel: pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid
Aug 09 14:06:03 manjaro systemd-udevd[244]: /etc/udev/rules.d/40-libsane.rules:26: GOTO="libsane_rules_end" has no matching label, ignoring
Aug 09 14:06:03 manjaro systemd-udevd[244]: /etc/udev/rules.d/S99-2000S1.rules:26: GOTO="libsane_rules_end" has no matching label, ignoring
Aug 09 14:06:04 manjaro kernel: intel-spi 0000:00:1f.5: invalid resource
Aug 09 14:06:04 manjaro kernel: i801_smbus 0000:00:1f.4: Transaction timeout
Aug 09 14:06:04 manjaro kernel: i801_smbus 0000:00:1f.4: Failed terminating the transaction
Aug 09 14:06:04 manjaro kernel: i801_smbus 0000:00:1f.4: SMBus is busy, can't use it!
Aug 09 14:06:04 manjaro kernel:
Aug 09 14:06:05 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20200925/evgpe-839)
Aug 09 14:06:05 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20200925/evgpe-839)
Aug 09 14:06:05 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20200925/evgpe-839)
Aug 09 14:06:05 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20200925/evgpe-839)
Aug 09 14:06:05 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20200925/evgpe-839)
Aug 09 14:06:05 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20200925/evgpe-839)
Aug 09 14:06:05 manjaro kernel: sd 0:0:0:0: [sda] No Caching mode page found
Aug 09 14:06:05 manjaro kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Aug 09 14:06:05 manjaro kernel: sd 1:0:0:0: [sdb] No Caching mode page found
Aug 09 14:06:05 manjaro kernel: sd 1:0:0:0: [sdb] Assuming drive cache: write through
Aug 09 14:06:06 manjaro kernel: snd_hda_codec_hdmi ehdaudio0D2: Monitor plugged-in, Failed to power up codec ret=[-13]
Aug 09 14:06:09 manjaro lightdm[755]: gkr-pam: couldn't unlock the login keyring.
Aug 09 14:06:28 manjaro kernel: irq 9: nobody cared (try booting with the "irqpoll" option)
Aug 09 14:06:28 manjaro kernel: handlers:
Aug 09 14:06:28 manjaro kernel: [<000000003954cc57>] acpi_irq
Aug 09 14:06:28 manjaro kernel: Disabling IRQ #9
General info:
Generated on 2022-08-09 14:11:1660047114
#################### inxi -Fxzc0 ########################
System:
Kernel: 5.10.135-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.1.1 Desktop: Xfce v: 4.16.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 81RS v: Lenovo Yoga S740-14IIL serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0J40709 WIN serial: <superuser required> UEFI: LENOVO
v: BYCN39WW date: 05/28/2021
Battery:
ID-1: BAT0 charge: 63.0 Wh (96.5%) condition: 65.3/62.0 Wh (105.3%) volts: 17.0 min: 15.4
model: LGC L19L4PD2 status: full
CPU:
Info: quad core model: Intel Core i7-1065G7 bits: 64 type: MT MCP arch: Ice Lake rev: 5 cache:
L1: 320 KiB L2: 2 MiB L3: 8 MiB
Speed (MHz): avg: 1138 high: 1201 min/max: 400/3900 cores: 1: 1200 2: 1201 3: 1200 4: 1108
5: 1100 6: 1100 7: 1100 8: 1100 bogomips: 23968
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel Iris Plus Graphics G7 vendor: Lenovo driver: i915 v: kernel arch: Gen-11
bus-ID: 00:02.0
Device-2: NVIDIA GP108M [GeForce MX250] vendor: Lenovo driver: nvidia v: 515.65.01
arch: Pascal bus-ID: 2b:00.0
Device-3: Chicony Integrated Camera type: USB driver: uvcvideo bus-ID: 3-5:5
Display: x11 server: X.Org v: 21.1.4 driver: X: loaded: modesetting,nvidia unloaded: nouveau
gpu: i915 resolution: 1: 1920x1080~60Hz 2: N/A
OpenGL: renderer: Mesa Intel Iris Plus Graphics (ICL GT2) v: 4.6 Mesa 22.1.4
direct render: Yes
Audio:
Device-1: Intel Ice Lake-LP Smart Sound Audio vendor: Lenovo driver: sof-audio-pci
bus-ID: 00:1f.3
Sound Server-1: ALSA v: k5.10.135-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: PulseAudio v: 16.1 running: no
Sound Server-4: PipeWire v: 0.3.56 running: yes
Network:
Device-1: Intel Ice Lake-LP PCH CNVi WiFi driver: iwlwifi v: kernel bus-ID: 00:14.3
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus-ID: 2-1.4:4
IF: enp0s13f0u1u4 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: pan1 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-10:9
Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends
Drives:
Local Storage: total: 1.86 TiB used: 393.52 GiB (20.7%)
ID-1: /dev/nvme0n1 vendor: Micron model: MTFDHBA1T0TCK size: 953.87 GiB temp: 44.9 C
ID-2: /dev/sda type: USB vendor: Western Digital model: WD10EARX-00N0YB0 size: 931.51 GiB
ID-3: /dev/sdb type: USB vendor: Kingston model: DataTraveler 2.0 size: 14.54 GiB
Partition:
ID-1: / size: 57.85 GiB used: 35.76 GiB (61.8%) fs: ext4 dev: /dev/nvme0n1p8
ID-2: /boot/efi size: 259.5 MiB used: 113.6 MiB (43.8%) fs: vfat dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: partition size: 16.67 GiB used: 0 KiB (0.0%) dev: /dev/nvme0n1p9
Sensors:
System Temperatures: cpu: 47.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 268 Uptime: 7m Memory: 15.2 GiB used: 1.79 GiB (11.8%) Init: systemd Compilers:
gcc: 12.1.1 clang: 14.0.6 Packages: 1774 Client: Unknown Client: wrapper-2.0 inxi: 3.3.20
Google could not clearify this ( … for my poor knowledge )
Thanks!