Hi, I have a similar issue. I ran the latest update and boot hangs at
Starting Terminate Plymouth Boot Screen…
I was able to open a tty and login.
I ran inxi -zv8:
System:
Kernel: 6.6.46-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1 clocksource: tsc
avail: hpet,acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
root=UUID=65fa15e3-00f9-4999-a851-54fd48aac08e rw quiet splash
resume=UUID=95f4dfc2-204b-4e44-933a-17fb71c740e4 udev.log_priority=3
Console: tty 2 DM: SDDM Distro: Manjaro base: Arch Linux
Machine:
Type: Desktop System: CORSAIR product: CORSAIR ONE i160 v: V3 serial: <superuser required>
Mobo: Micro-Star model: Z370I C2018 (MS-7B43) v: 1.0 serial: <superuser required>
part-nu: CS-9020003-NA uuid: <superuser required> UEFI: American Megatrends v: 2.QJ
date: 05/22/2019
Battery:
ID-1: hidpp_battery_0 charge: 100% condition: N/A volts: 4.2 min: N/A model: Logitech G Pro
Wireless Gaming Mouse type: N/A serial: <filter> status: full
Memory:
System RAM: total: 32 GiB available: 31.27 GiB used: 782.8 MiB (2.4%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 64 GiB slots: 4 modules: 2 EC: None max-module-size: 16 GiB note: est.
Device-1: ChannelA-DIMM0 type: DDR4 detail: synchronous unbuffered (unregistered) size: 16 GiB
speed: 2667 MT/s volts: curr: 1 width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CM4B16G2L2666A18K2 serial: N/A
Device-2: ChannelA-DIMM1 type: no module installed
Device-3: ChannelB-DIMM0 type: DDR4 detail: synchronous unbuffered (unregistered) size: 16 GiB
speed: 2667 MT/s volts: curr: 1 width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CM4B16G2L2666A18K2 serial: N/A
Device-4: ChannelB-DIMM1 type: no module installed
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i9-9900K bits: 64 type: MT MCP arch: Coffee Lake gen: core 9 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 0xC (12)
microcode: 0xF8
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 801 high: 829 min/max: 800/5000 scaling: driver: intel_pstate
governor: powersave cores: 1: 829 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800 8: 800 9: 800
10: 800 11: 800 12: 800 13: 800 14: 800 15: 800 16: 800 bogomips: 115232
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de
ds_cpl dtes64 dtherm dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase
fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid lahf_lm lm mca
mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq
pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand rdseed rdtscp rep_good sdbg sep
smap smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves
xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling mitigation: Microcode
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional; RSB filling;
PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: NVIDIA TU102 [GeForce RTX 2080 Ti Rev. A] vendor: Micro-Star MSI driver: N/A
alternate: nouveau non-free: 550.xx+ status: current (as of 2024-06; EOL~2026-12-xx)
arch: Turing code: TUxxx process: TSMC 12nm FF built: 2018-2022 pcie: gen: 1 speed: 2.5 GT/s
lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 10de:1e07 class-ID: 0300
Display: unspecified server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.2 driver: X:
loaded: N/A failed: nvidia gpu: N/A tty: 215x45
Monitor-1: Unknown-1 size-res: N/A in console modes: 3440x1440
API: EGL v: 1.5 platforms: device: 0 drv: swrast surfaceless: drv: swrast
inactive: gbm,wayland,x11
API: OpenGL v: 4.5 vendor: mesa v: 24.1.6-arch1.1 note: console (EGL sourced)
renderer: llvmpipe (LLVM 18.1.8 256 bits)
API: Vulkan Message: No Vulkan data available.
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
alternate: snd_soc_avs bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0403
Device-2: NVIDIA TU102 High Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1
chip-ID: 10de:10f7 class-ID: 0403
API: ALSA v: k6.6.46-1-MANJARO status: kernel-api with: aoss type: oss-emulator
tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.2.3 status: off with: 1: pipewire-pulse status: off 2: wireplumber
status: off 3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 bus-ID: 07:00.0 chip-ID: 8086:24fd class-ID: 0280
IF: wlp7s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-11:6 chip-ID: 8087:0a2b class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 2.29 TiB used: 347 GiB (14.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLW512HMJP-00000 size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: CXY7501Q temp: 46.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000LM015-2E8174 size: 1.82 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: SDM1 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 1.79 TiB size: 1.76 TiB (98.37%) used: 347 GiB (19.3%) fs: ext4 dev: /dev/sda2
maj-min: 8:2 label: N/A uuid: 65fa15e3-00f9-4999-a851-54fd48aac08e
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 296 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 84D1-91B8
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes compressor: zstd
max-pool: 20%
ID-1: swap-1 type: partition size: 34.4 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
maj-min: 8:3 label: swap uuid: 95f4dfc2-204b-4e44-933a-17fb71c740e4
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-3:2 info: Logitech Unifying Receiver type: keyboard,mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 98mA chip-ID: 046d:c52b class-ID: 0300
Device-2: 1-7:3 info: Corsair ONE type: keyboard driver: hid-generic,usbhid interfaces: 1
rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 1b1c:0c14
class-ID: 0300
Device-3: 1-9:4 info: Cooler Master MASTERKEYS PRO S with intelligent RGB type: keyboard,HID
driver: hid-generic,usbhid interfaces: 3 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 2516:003c class-ID: 0300
Device-4: 1-10:5 info: Logitech PowerPlay Wireless Charging System type: keyboard,mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 498mA chip-ID: 046d:c53a class-ID: 0300
Device-5: 1-11:6 info: Intel Bluetooth wireless interface type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 8087:0a2b class-ID: e001
Hub-2: 2-0:1 info: super-speed hub ports: 10 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1
mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900
Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 5-2:2 info: Logitech Lightspeed Receiver type: keyboard,mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 98mA chip-ID: 046d:c539 class-ID: 0300
Hub-6: 6-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1
mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (rpm): N/A
Repos:
Packages: 1806 pm: pacman pkgs: 1799 libs: 377 tools: pamac pm: flatpak pkgs: 7
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirrors.atlas.net.co/manjaro/stable/$repo/$arch
2: https://gsl-syd.mm.fcix.net/manjaro/stable/$repo/$arch
3: https://fastmirror.pp.ua/manjaro/stable/$repo/$arch
4: https://ftpmirror1.infania.net/mirror/manjaro/stable/$repo/$arch
5: https://mirror.freedif.org/Manjaro/stable/$repo/$arch
6: https://mirror.2degrees.nz/manjaro/stable/$repo/$arch
7: https://mirrors.jlu.edu.cn/manjaro/stable/$repo/$arch
8: http://mirror.is.co.za/mirrors/manjaro.org/stable/$repo/$arch
Processes:
CPU top: 5 of 247
1: cpu: 0.9% command: init pid: 1 mem: 12.1 MiB (0.0%)
2: cpu: 0.4% command: surfsharkd.js started-by: gjs pid: 788 mem: 35.5 MiB (0.1%)
3: cpu: 0.3% command: systemd-udevd pid: 440 mem: 10.4 MiB (0.0%)
4: cpu: 0.3% command: NetworkManager pid: 656 mem: 24.2 MiB (0.0%)
5: cpu: 0.2% command: systemd-journald pid: 394 mem: 19.2 MiB (0.0%)
Memory top: 5 of 247
1: mem: 59.3 MiB (0.1%) command: packagekitd pid: 822 cpu: 0.2%
2: mem: 35.5 MiB (0.1%) command: surfsharkd.js started-by: gjs pid: 788 cpu: 0.4%
3: mem: 24.2 MiB (0.0%) command: NetworkManager pid: 656 cpu: 0.3%
4: mem: 22.3 MiB (0.0%) command: sddm pid: 750 cpu: 0.0%
5: mem: 19.2 MiB (0.0%) command: systemd-journald pid: 394 cpu: 0.2%
Info:
Processes: 247 Power: uptime: 2m states: freeze,mem,disk suspend: deep avail: s2idle wakeups: 0
hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 12.49 GiB Init: systemd
v: 256 default: graphical tool: systemctl
Compilers: clang: 18.1.8 gcc: 14.2.1 Shell: Bash (login) v: 5.2.32 running-in: tty 2
inxi: 3.3.35
Edit: Should I open a separate issue ?