Unable to boot past Mobo/Manjaro Loading screen after 09/02 update

Support System Updates
1

Hello, before the update my computer was running normally. I did the update and restarted and now my computer will post to bios and then gets stuck on a black screen. I tried seeing if it was a gui problem and tried switching tty to CRL+ALT +F2/F1 but its also is a black screen. I’ve tried restarting multiple times to no avail. I can’t access a terminal so I don’t know exactly what logs or anything I can get to be helpful.
I have
amd GPU and CPU
kernel 6.10
Nvme SSD
Ddr5 expo ram
Gnome for my desktop

I can access the menu by hitting shift on boot
I’m on kernel 6.10 I’m gonna try booting to 6.9 and see if that helps… Did not help going to try plugging my monitor into my motherboard instead and use integrated graphics…uh it did something, now instead of a black screen it get stuck at just showing the Manjaro boot w/ Mobo logo instead of black screen and I can switch w/ CRL alt f2 but instead of being a black screen it stops input to the monitor and monitor goes into standby. I think I may be approaching the issue? A problem w/ amd gpu integrated or discrete graphics? Going to restart and see if problem persists… Yup now consistently doing the same thing. Flashes Mobo/Manjaro logo goes black then switched to loading version, three loading dots all flash then go into done loading version of three dots and gets stuck there. Versus would finish loading and then go to black screen when it was plugged into discrete amd GPU…

Should I consider my desktop bricked and reinstall fresh?

2

Are you able to chroot into the system using a Live USB?

manjaro-chroot -a

If so, could you provide the results of inxi-zv8 for us (highlight the pasted text and press the </> button at the top of the reply window).

Also the 6.9 Kernel is EOL. Having that on the system will likely cause issues with updates. I’d suggest remove that, then maybe try linux66 and / or linux61 (both LTS) as well.

If you are able to chroot and remove the linux69 kernel, you could try re-running the update.

Also: do you have any Timeshift snapshots etc.?

1 Like
3

I will go try to chroot with a live usb now to get inxi and remove linux69, I dont think i have any timeshift snaps or anything but i can check.

1 Like
4

When you chroot in Live boot:
I recommend to remove quiet and splash in your grub file, you can edit it with sudo nano /etc/default/grub after saving.

sudo update-grub

This shows everything around your boot, it probably also could cure your blackscreen problem.

3 Likes
5

Okay chroot was easier to do than i thought it would be, first here is inxi -zv8

CPU: 12-core AMD Ryzen 9 7900X (-MT MCP-) speed/min/max: 711/400/5733 MHz
Kernel: 6.9.12-3-MANJARO x86_64 Up: 3m Mem: 3.29/61.98 GiB (5.3%)
Storage: 3.69 TiB (5.4% used) Procs: 528 Shell: 0:0h-events_highpri
inxi: 3.3.35
[manjaro-gnome /]# sudo inxi -zv8
System:
  Kernel: 6.9.12-3-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
    misobasedir=manjaro misolabel=MANJARO_GNOME_2407 quiet
    systemd.show_status=1 splash driver=free nouveau.modeset=1 i915.modeset=1
    radeon.modeset=1
  Desktop: GNOME v: 46.4 tk: GTK v: 3.24.43 wm: gnome-shell
    tools: gsd-screensaver-proxy dm: N/A Distro: Manjaro base: Arch Linux
Machine:
  Type: Desktop Mobo: Micro-Star model: MAG X670E TOMAHAWK WIFI (MS-7E12)
    v: 1.0 serial: N/A UEFI: American Megatrends LLC. v: 1.80 date: 02/06/2024
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 64 GiB available: 61.98 GiB used: 3.94 GiB (6.3%)
  Array-1: capacity: 128 GiB slots: 4 modules: 2 EC: None
    max-module-size: 32 GiB note: est.
  Device-1: DIMMA1 type: no module installed
  Device-2: DIMMA2 type: DDR5 detail: synchronous unbuffered (unregistered)
    size: 32 GiB speed: spec: 4800 MT/s actual: 6000 MT/s volts: curr: 1.1
    min: 1.1 max: 1.1 width (bits): data: 64 total: 64 manufacturer: N/A
    part-no: F5-6000J3040G32G serial: <filter>
  Device-3: DIMMB1 type: no module installed
  Device-4: DIMMB2 type: DDR5 detail: synchronous unbuffered (unregistered)
    size: 32 GiB speed: spec: 4800 MT/s actual: 6000 MT/s volts: curr: 1.1
    min: 1.1 max: 1.1 width (bits): data: 64 total: 64 manufacturer: N/A
    part-no: F5-6000J3040G32G serial: <filter>
PCI Slots:
  Slot: 1 type: PCIe gen: 1 status: in use length: short volts: 3.3
    bus-ID: 00:01.1 children: 1: 01:00.0 class-ID: 0604 type: bridge children:
    1: 02:00.0 class-ID: 0604 type: bridge children: 1: 03:00.0 class-ID: 0300
    type: display 2: 03:00.1 class-ID: 0403 type: audio
  Slot: N/A type: N/A status: in use info: M.2, J3502 length: short
    volts: 3.3 bus-ID: 00:01.2 children: 1: 04:00.0 class-ID: 0108
    type: mass-storage
  Slot: 3 type: PCIe gen: 3 status: in use length: short volts: 3.3
    bus-ID: 00:02.2 children: 1: 18:00.0 class-ID: 0300 type: display 2: 18:00.1
    class-ID: 0403 type: audio
  Slot: 4 type: PCIe gen: 4 status: in use length: short volts: 3.3
    bus-ID: 00:02.1 children: 1: 05:00.0 class-ID: 0604 type: bridge children:
    1: 06:00.0 class-ID: 0604 type: bridge children: 1: 07:00.0 class-ID: 0108
    type: mass-storage 2: 06:04.0 class-ID: 0604 type: bridge children:
    1: 08:00.0 class-ID: 0200 type: network 3: 06:05.0 class-ID: 0604
    type: bridge 4: 06:06.0 class-ID: 0604 type: bridge 5: 06:07.0
    class-ID: 0604 type: bridge 6: 06:08.0 class-ID: 0604 type: bridge
    children: 1: 0c:00.0 class-ID: 0604 type: bridge children: 1: 0d:00.0
    class-ID: 0604 type: bridge 2: 0d:04.0 class-ID: 0604 type: bridge
    children: 1: 0f:00.0 class-ID: 0280 type: network 3: 0d:05.0
    class-ID: 0604 type: bridge 4: 0d:06.0 class-ID: 0604 type: bridge
    5: 0d:07.0 class-ID: 0604 type: bridge 6: 0d:08.0 class-ID: 0604
    type: bridge 7: 0d:0c.0 class-ID: 0604 type: bridge children: 1: 14:00.0
    class-ID: 0c03 type: serialbus 8: 0d:0d.0 class-ID: 0604 type: bridge
    children: 1: 15:00.0 class-ID: 0106 type: mass-storage 7: 06:0c.0
    class-ID: 0604 type: bridge children: 1: 16:00.0 class-ID: 0c03
    type: serialbus 8: 06:0d.0 class-ID: 0604 type: bridge children:
    1: 17:00.0 class-ID: 0106 type: mass-storage
CPU:
  Info: model: AMD Ryzen 9 7900X socket: AM5 bits: 64 type: MT MCP arch: Zen 4
    gen: 5 level: v4 note: check built: 2022+ process: TSMC n5 (5nm)
    family: 0x19 (25) model-id: 0x61 (97) stepping: 2 microcode: 0xA601206
  Topology: cpus: 1x cores: 12 tpc: 2 threads: 24 smt: enabled cache:
    L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 12 MiB desc: 12x1024 KiB
    L3: 64 MiB desc: 2x32 MiB
  Speed (MHz): avg: 803 high: 3755 min/max: 400/5733 base/boost: 4700/5700
    scaling: driver: amd-pstate-epp governor: powersave volts: 1.3 V
    ext-clock: 100 MHz cores: 1: 400 2: 3755 3: 400 4: 3534 5: 400 6: 400
    7: 400 8: 400 9: 400 10: 400 11: 400 12: 3599 13: 400 14: 400 15: 400
    16: 400 17: 400 18: 400 19: 400 20: 400 21: 400 22: 400 23: 400 24: 400
    bogomips: 225675
  Flags: 3dnowprefetch abm adx aes amd_lbr_pmc_freeze amd_lbr_v2 aperfmperf
    apic arat avic avx avx2 avx512_bf16 avx512_bitalg avx512_vbmi2
    avx512_vnni avx512_vpopcntdq avx512bw avx512cd avx512dq avx512f
    avx512ifma avx512vbmi avx512vl bmi1 bmi2 bpext cat_l3 cdp_l3 clflush
    clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm
    cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de
    decodeassists erms extapic extd_apicid f16c flush_l1d flushbyasid fma fpu
    fsgsbase fsrm fxsr fxsr_opt gfni ht hw_pstate ibpb ibrs ibrs_enhanced ibs
    invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor
    movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw
    overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core
    perfctr_llc perfctr_nb perfmon_v2 pfthreshold pge pku pni popcnt pse
    pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp
    succor svm svm_lock syscall tce topoext tsc tsc_scale umip user_shstk
    v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vnmi
    vpclmulqdq wbnoinvd wdt x2avic xgetbv1 xsave xsavec xsaveerptr xsaveopt
    xsaves xtopology
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow mitigation: Safe RET
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
    conditional; STIBP: always-on; RSB filling; PBRSB-eIBRS: Not affected;
    BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] vendor: XFX
    driver: amdgpu v: kernel arch: RDNA-3 code: Navi-3x process: TSMC n5 (5nm)
    built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: none
    empty: DP-4, DP-5, DP-6, HDMI-A-2, Writeback-1 bus-ID: 03:00.0
    chip-ID: 1002:744c class-ID: 0300
  Device-2: NVIDIA GA102 [GeForce RTX 3090] vendor: eVga.com.
    driver: nouveau v: kernel alternate: nvidia_drm,nvidia non-free: 550.xx+
    status: current (as of 2024-06; EOL~2026-12-xx) arch: Ampere code: GAxxx
    process: TSMC n7 (7nm) built: 2020-2023 pcie: gen: 1 speed: 2.5 GT/s
    lanes: 4 link-max: gen: 4 speed: 16 GT/s lanes: 16 ports: active: none
    empty: DP-1, DP-2, DP-3, HDMI-A-1 bus-ID: 18:00.0 chip-ID: 10de:2204
    class-ID: 0300
  Device-3: AMD Raphael vendor: Micro-Star MSI driver: amdgpu v: kernel
    arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
    gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-7 empty: DP-8, DP-9,
    HDMI-A-3, Writeback-2 bus-ID: 19:00.0 chip-ID: 1002:164e class-ID: 0300
    temp: 42.0 C
  Device-4: Logitech Logitech Webcam C925e driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-5:5
    chip-ID: 046d:085b class-ID: 0102 serial: <filter>
  Display: server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.2
    compositor: gnome-shell driver: X: loaded: amdgpu,nvidia
    unloaded: modesetting,nouveau,radeon alternate: fbdev,nv,vesa
    dri: radeonsi gpu: amdgpu display-ID: :0
  Monitor-1: DP-7 model: MSI G271CQR serial: <filter> built: 2023
    res: 2560x1440 dpi: 110 gamma: 1.2 chroma: red: x: 0.663 y: 0.329 green:
    x: 0.271 y: 0.596 blue: x: 0.133 y: 0.118 white: x: 0.314 y: 0.329
    size: 597x336mm (23.5x13.23") diag: 676mm (26.6") ratio: 16:9
    modes: 2560x1440, 1920x1200, 1920x1080, 1600x1200, 1280x1440, 1680x1050,
    1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 720x576,
    720x480, 640x480, 720x400
  API: EGL v: 1.5 hw: drv: nvidia nouveau drv: amd radeonsi platforms:
    device: 0 drv: nouveau device: 1 drv: radeonsi device: 2 drv: radeonsi
    device: 3 drv: swrast gbm: drv: nouveau surfaceless: drv: nouveau
    inactive: wayland,x11
  API: OpenGL v: 4.6 compat-v: 4.3 vendor: mesa v: 24.1.6-arch1.1
    note: incomplete (EGL sourced) renderer: NV172, AMD Radeon RX 7900 GRE
    (radeonsi navi31 LLVM 18.1.8 DRM 3.57 6.9.12-3-MANJARO), AMD Radeon
    Graphics (radeonsi raphael_mendocino LLVM 18.1.8 DRM 3.57
    6.9.12-3-MANJARO), llvmpipe (LLVM 18.1.8 256 bits)
  API: Vulkan Message: No Vulkan data available.
Audio:
  Device-1: AMD Navi 31 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab30
    class-ID: 0403
  Device-2: NVIDIA GA102 High Definition Audio vendor: eVga.com.
    driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 4
    link-max: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 18:00.1
    chip-ID: 10de:1aef class-ID: 0403
  Device-3: AMD Rembrandt Radeon High Definition Audio
    vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 4
    speed: 16 GT/s lanes: 16 bus-ID: 19:00.1 chip-ID: 1002:1640 class-ID: 0403
  Device-4: AMD Family 17h/19h HD Audio vendor: Micro-Star MSI
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 19:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Device-5: Schiit Audio Modi+ driver: snd-usb-audio type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2:2 chip-ID: 30be:100c
    class-ID: 0102
  Device-6: Logitech Logitech Webcam C925e driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-5:5
    chip-ID: 046d:085b class-ID: 0102 serial: <filter>
  Device-7: Razer USA Seiren V2 X driver: hid-generic,snd-usb-audio,usbhid
    type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 7-2:2
    chip-ID: 1532:0543 class-ID: 0300 serial: <filter>
  API: ALSA v: k6.9.12-3-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.2.3 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169
    v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 08:00.0
    chip-ID: 10ec:8125 class-ID: 0200
  IF: enp8s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter
    driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1
    bus-ID: 0f:00.0 chip-ID: 14c3:0616 class-ID: 0280
  IF: wlp15s0 state: down mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
  WAN IP: <filter>
Bluetooth:
  Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-7:6 chip-ID: 0e8d:0616
    class-ID: e001 serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
    lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c0104
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 3.69 TiB used: 205.76 GiB (5.4%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
    model: WD BLACK SN850X 2000GB size: 1.82 TiB block-size: physical: 512 B
    logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 620331WD temp: 37.9 C
  ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Western Digital
    model: WD BLACK SN850X 2000GB size: 1.82 TiB block-size: physical: 512 B
    logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 620331WD temp: 33.9 C
  ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: Cruzer Glide
    size: 57.33 GiB block-size: physical: 512 B logical: 512 B type: USB
    rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter>
    fw-rev: 1.00
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 205.76 GiB (11.2%)
    fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
    uuid: be15d9bb-ccae-498e-a904-a946b7a29d5c
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 296 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: N/A uuid: C790-D242
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 3.68 GiB fs: N/A
    label: MANJARO_GNOME_2407 uuid: 2024-08-21-01-38-09-00
  ID-2: /dev/sda2 maj-min: 8:2 size: 4 MiB fs: N/A label: MISO_EFI
    uuid: 1031-2CEB
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-6:2 info: SanDisk Cruzer Glide type: mass storage
    driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 power: 200mA chip-ID: 0781:5575 class-ID: 0806
    serial: <filter>
  Device-2: 1-7:3 info: Micro Star MYSTIC LIGHT type: HID
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 0db0:0076 class-ID: 0300
    serial: <filter>
  Hub-2: 2-0:1 info: super-speed hub ports: 6 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-2:2 info: Schiit Audio Modi+ type: audio driver: snd-usb-audio
    interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
    power: 500mA chip-ID: 30be:100c class-ID: 0102
  Device-2: 3-3:3 info: Razer USA Naga Trinity type: mouse,keyboard
    driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 1532:0067 class-ID: 0300
    serial: <filter>
  Device-3: 3-4:4 info: Razer USA BlackWidow V4 Pro type: keyboard,mouse,HID
    driver: hid-generic,usbhid interfaces: 5 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 1532:028d class-ID: 0300
  Device-4: 3-5:5 info: Logitech Logitech Webcam C925e type: video,audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 046d:085b class-ID: 0102 serial: <filter>
  Device-5: 3-7:6 info: MediaTek Wireless_Device type: bluetooth
    driver: btusb interfaces: 3 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 0e8d:0616 class-ID: e001 serial: <filter>
  Hub-4: 4-0:1 info: super-speed hub ports: 5 rev: 3.1
    speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 5-2:2 info: Microsoft Xbox Elite Series 2 Controller (model
    1797) type: <vendor specific> driver: xpad interfaces: 3 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 500mA
    chip-ID: 045e:0b00 class-ID: ff00 serial: <filter>
  Hub-6: 6-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-7: 7-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 7-2:2 info: Razer USA Seiren V2 X type: audio,HID
    driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 500mA
    chip-ID: 1532:0543 class-ID: 0300 serial: <filter>
  Hub-8: 8-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-9: 9-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-10: 10-0:1 info: Linux Foundation 3.0 root hub ports: N/A rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 64.5 C mobo: 34.0 C
  Fan Speeds (rpm): N/A
  GPU: device: amdgpu temp: 43.0 C device: amdgpu temp: 41.0 C mem: 58.0 C
    fan: 0 watts: 18.00
Repos:
  Packages: 1531 pm: pacman pkgs: 1506 libs: 485 tools: gnome-software,pamac
    pm: rpm pkgs: 0 pm: flatpak pkgs: 25
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://volico.mm.fcix.net/manjaro/stable/$repo/$arch
    2: https://forksystems.mm.fcix.net/manjaro/stable/$repo/$arch
    3: https://mirror.csclub.uwaterloo.ca/manjaro/stable/$repo/$arch
    4: https://manjaro.ynh.ovh/stable/$repo/$arch
    5: https://mirror.phoepsilonix.love/manjaro/stable/$repo/$arch
    6: https://mirrors.ft.uam.es/manjaro/stable/$repo/$arch
    7: http://ossmirror.mycloud.services/os/linux/manjaro/stable/$repo/$arch
    8: https://mirror.truenetwork.ru/manjaro/stable/$repo/$arch
Processes:
  CPU top: 5 of 539
  1: cpu: 32.9% command: firefox pid: 3672 mem: 480.8 MiB (0.7%)
  2: cpu: 9.7% command: nautilus pid: 2729 mem: 296.4 MiB (0.4%)
  3: cpu: 3.4% command: firefox pid: 3969 mem: 191.1 MiB (0.3%)
  4: cpu: 2.4% command: gnome-shell pid: 1650 mem: 321.7 MiB (0.5%)
  5: cpu: 2.0% command: firefox pid: 3832 mem: 143.2 MiB (0.2%)
  Memory top: 5 of 539
  1: mem: 480.8 MiB (0.7%) command: firefox pid: 3672 cpu: 32.9%
  2: mem: 321.7 MiB (0.5%) command: gnome-shell pid: 1650 cpu: 2.4%
  3: mem: 296.4 MiB (0.4%) command: nautilus pid: 2729 cpu: 9.7%
  4: mem: 191.1 MiB (0.3%) command: firefox pid: 3969 cpu: 3.4%
  5: mem: 143.2 MiB (0.2%) command: firefox pid: 3832 cpu: 2.0%
Info:
  Processes: 539 Power: uptime: 4m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 24.75 GiB services: gsd-power,
    power-profiles-daemon, upowerd Init: systemd v: 256 default: graphical
    tool: systemctl
  Compilers: clang: 18.1.8 gcc: 14.2.1 alt: 13 Shell: 2:0-events (sudo)
    default: Bash v: 5.2.32 running-in: kthreadd inxi: 3.3.35

Okay so awkward question, I can’t seem to be able to remove linux69 because my liveboot usb is running linux69 how can i update the live usb kernel? I literally just downloaded this one off manjaro website. I also removed quiet and splash from grub file like Kobold recommended. I also have no timeshift snapshots I should make one before i update from now on…

6

This is surprising to be honest; in chroot it should be able to manage the installed kernels regardless, but I guess you could try a (not too much) older .ISO (although this isn’t generally recommended) with e.g. the 66 kernel.

1 Like
7

I’ll try that, I confirmed i chrooted into the correct mnt and im simply running

[manjaro-gnome /]# mhwd-kernel -r linux69
Error: You can't remove your current kernel.

Ill go try and find a linux66 iso

8

You create only a timeshift snapshot when your system is running fine… normally you would do this before you update your system.

1 Like
9

Wait, i just removed it with pacman and its gone… I don’t know why i couldn’t do it with mhwd-kernel.

10

Should be. Try rebooting, going into chroot again and issuing

mhwd-kernel -li

(you might get away with just exiting and then re-entering the chroot environment).
:slight_smile:

1 Like
12

Okay, so the kernel was for sure removed. I tried booting back into the original drive and it shows a screen that states something about early hooks and then something about how a hub failed? Then it just shows an underline for a terminal in the top left of the screen that is unblinking. If i switch tty it just turns into a blinking underline. I’m guessing omega bricked? I tried both linux66 and linux610.
Ill try to get a picture so i can see what it says better…

So it states…

running early hook [udev]
running hook [udev]
tiggering uevents
3.181042 hub 10-0:1.0: config failed, hub doesnt have any ports!

It then at least runs through the starting manjaro code but still goes to the still underline in the top left of the monitor…

13

You replied to yourself btw.

You may want to chroot again from live boot and try if you don’t missed any updates?

You could also may copy your Grub Code in here, hopefully you don’t do a mistake while editing Grub.

14

@Kobold
Heres my grub file

# GRUB boot loader configuration

GRUB_DEFAULT=saved
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Manjaro"
GRUB_CMDLINE_LINUX_DEFAULT="apparmor=1 security=apparmor udev.log_priority=3"
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices

#GRUB_ENABLE_CRYPTODISK=y

# Set to 'countdown' or 'menu' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=hidden

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command 'videoinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/usr/share/grub/background.png"
GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
GRUB_SAVEDEFAULT=true

# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y

# Uncomment this option to enable os-prober execution in the grub-mkconfig command
GRUB_DISABLE_OS_PROBER=false

# Uncomment to ensure that the root filesystem is mounted read-only so that
# systemd-fsck can run the check automatically. We use 'fsck' by default, which
# needs 'rw' as boot parameter, to avoid delay in boot-time. 'fsck' needs to be
# removed from 'mkinitcpio.conf' to make 'systemd-fsck' work.
# See also Arch-Wiki: https://wiki.archlinux.org/index.php/Fsck#Boot_time_checking
#GRUB_ROOT_FS_RO=true
15

Chroot from Live Boot and try to update again?

sudo pacman -Syu && pamac update

TBH i have no experience around this error.

1 Like
17

It said its all up to date when i tried that, at this rate im guessing reinstalling is the best option. How can i get a folder out of chroot? Im trying to use the cp command but it doesnt seem to be able to find my internal harddrive…
I’ve been trying different variations of this but no matter what it cant seem to find my other internal drive…

sudo cp -r /home/abog/Documents/MineCraftServer /dev/nvme1n1/
18

If you have chrooted it should be mounted… but you can also mount it in dolphin, if you want.

Next time use a external drive for Timeshift (Rsync) with a ext4 partition…
then you don’t have to reinstall in future.

1 Like
19

Its mounted but its not showing up in the file explorer only my secondary drive and the manjaro usb weirdly. Ill keep looking around.

20

This shows all drives:

lsblk -f

But for a better overview you can also open Gparted, if you want.

1 Like
21

I found it in the file explorer from that, thank you. I got everything i needed from the main drive to my secondary. Time to fresh reinstall. Thank you!

1 Like
22

Goodluck :slight_smile: