[Stable Update] 2024-07-01 - Kernels, Systemd, KDE Gear, LibreOffice, Firefox, Wine, Qemu

[Aragorn]

@hanny00

checkrebuild prints foreign khotkeys python-manjaro-sdk

Both of those packages have been dropped from the repos. You should remove them, as they are no longer supported.

[jackdinn]

Also bluetooth USB device will not power on any more. I have downgraded bluez-qt back to 6.2.0.1 where it was before this update but it still wont work?

[bluetooth]# [CHG] Controller 8C:88:4B:46:ED:7C PowerState: off-enabling
[bluetooth]# Failed to set power on: org.bluez.Error.Failed
[bluetooth]# [CHG] Controller 8C:88:4B:46:ED:7C PowerState: on
[bluetooth]# show
Controller 8C:88:4B:46:ED:7C (public)
        Manufacturer: 0x005d (93)
        Version: 0x0a (10)
        Name: greg-optiplex7050 #1
        Alias: greg-optiplex7050 #1
        Class: 0x00000000 (0)
        Powered: no
        PowerState: on
        Discoverable: no
        DiscoverableTimeout: 0x000000b4 (180)
        Pairable: yes
        UUID: A/V Remote Control        (0000110e-0000-1000-8000-00805f9b34fb)
        UUID: Handsfree Audio Gateway   (0000111f-0000-1000-8000-00805f9b34fb)
        UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
        UUID: Audio Sink                (0000110b-0000-1000-8000-00805f9b34fb)
        UUID: Audio Source              (0000110a-0000-1000-8000-00805f9b34fb)
        UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
        UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)
        UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
        UUID: Device Information        (0000180a-0000-1000-8000-00805f9b34fb)
        UUID: Vendor specific           (03b80e5a-ede8-4b33-a751-6ce34ec4c700)
        UUID: Handsfree                 (0000111e-0000-1000-8000-00805f9b34fb)
        Modalias: usb:v1D6Bp0246d054C
        Discovering: no
        Roles: central
        Roles: peripheral
Advertising Features:
        ActiveInstances: 0x00 (0)
        SupportedInstances: 0x04 (4)
        SupportedIncludes: tx-power
        SupportedIncludes: appearance
        SupportedIncludes: local-name
        SupportedSecondaryChannels: 1M
        SupportedSecondaryChannels: 2M
        SupportedSecondaryChannels: Coded
[bluetooth]#

Im about to roll back the system as iv got boot errors (as bellow) and bluetooth failure.

A start job is running for /dev/tpmrm0 (1min 5s / 1lmin 34Ys)
Timed out waiting for device /dev/tpmrm0

I dont know what else to do.

[hanny00]

Fehler: Vorgang konnte nicht erfolgreich vorbereitet werden:
Kann Abhängigkeiten nicht erfüllen:

• das Entfernen von python-manjaro-sdk verletzt Abhängigkeit ‘python-manjaro-sdk’ benötigt von web-installer-url-handler

Error: Operation could not be prepared successfully:
Cannot satisfy dependencies:

• removing python-manjaro-sdk violates dependency ‘python-manjaro-sdk’ required by web-installer-url-handler

[Aragorn]

Sorry, maar ik spreek geen Duits. Deze discussie bevindt zich in de internationale (en dus Engels-gesproken) sectie van het forum.

[Dementus]

… but all the better in Dutch

[Denis_Pom]

@hanny00

removing python-manjaro-sdk violates dependency ‘python-manjaro-sdk’ required by web-installer-url-handler

This package is no more in repo ! You should remove it before running the update.

[Aragorn]

@hanny00

Error: Operation could not be prepared successfully:
Cannot satisfy dependencies:

• removing python-manjaro-sdk violates dependency ‘python-manjaro-sdk’ required by web-installer-url-handler

Remove all of those packages then. Every time a discontinued package cannot be removed because of a dependency on another package, you should remove the dependency as well. It’s most likely an AUR package — in which case you can install it again afterwards — or another discontinued package.

[lee_mdk]

Kernel 5.4 fails at boot with this message after update. I tried reinstalling the kernel and modules but it did not help.

Fail Pic

[orkutmuratyilmaz]

@scotty65 thank you for highlighting that, I was lost in search results:)

After manjaro-chroot login to my installation, I’ve edited the /etc/default/grub file and edited the relevant line as below:

GRUB_CMDLINE_LINUX_DEFAULT="XXXXXXXXXXX SYSTEMD_CGROUP_ENABLE_LEGACY_FORCE=1 systemd.unified_cgroup_hierarchy=0"

and then sudo grub-install && sudo update-grub

and then rebooted my computer.

Now I can go back to my Monday routine, peacefully:))

[Astalacoucougnasse]

had another issue when rebooting.
I had to power off the computer after grub at Freeze state.
When restarting I switched to my kde session without any issue but I didn’t enter grub kernel selection

[hanny00]

the Update was installed as i noticed it when i called protontricks, and it had problems with python.

[Teo]

Just edited the wiki post with the workaround for not having internet in virtual machines if UFW is enabled

sudo ufw allow in on virbr0
sudo ufw allow out on virbr0

[soundofthunder]

@Aragorn

@notageek

octopi notifier does not start automatically anymore

Confirmed. I’ve now added it to the Plasma Autostart section.

Octopi starts as expected (on a fresh KDE install) after update is applied. It might be something else in play on some systems.

Go ahead, ask me, did I remember to reboot?!

Octopi Notifier does not autostart; just as described…
Add it to Plasma Autostart as previously indicated.

…otherwise, no obvious issues…

[kwacorn]

I thought Plasma 6.1 might make an appearance too, but:

[Testing Update] 2024-07-01 - Kernels, Gstreamer, Thunderbird, Pipewire, Mesa, Firefox, Gnome, Phosh, Nvidia, Qt6

We won’t update to 6.1 Plasma any time soon. There are serious bugs which prevents that. You can find the Plasma 6 upstream release schedule and see when bug fixes are expected. Switch to unstable to help testing. Testing branch is a preparation branch for the Stable branch. So we will see when Plasma 6.1 is enough stable from our end to land here.

As an end user I appreciate the Manjaro team and testers doing their thing to bring us an eventual stable Plasma 6.1 system with our patience.

[simewn]

Here is the output of systemctl plasmashell service if that helps,

file:///usr/share/plasma/plasmoids/org.kde.plasma.kicker/contents/ui/main.qml:45: TypeError: Value is null and could not be converted to an object
 file:///usr/share/plasma/plasmoids/org.kde.plasma.private.systemtray/contents/ui/main.qml:162:21: QML KSortFilterProxyModel: Binding loop detected for property "sourceModel"
 file:///usr/share/plasma/plasmoids/org.kde.plasma.private.systemtray/contents/ui/main.qml:162:21: QML KSortFilterProxyModel: Binding loop detected for property "sourceModel"
 qml: SystemTray ItemLoader: Invalid state, cannot determine source!
 qt.core.qobject.connect: QObject::connect: No such signal Solid::Backends::Fstab::FstabStorageAccess::repairRequested(QString)
 qt.core.qobject.connect: QObject::connect: No such signal Solid::Backends::Fstab::FstabStorageAccess::repairDone(Solid::ErrorType, QVariant, QString)
 qt.dbus.integration: Could not connect "org.cups.cupsd.Notifier" to PrinterFinishingsChanged(QString, QString, QString, uint, QString, bool) :
 QFont::setPointSizeF: Point size <= 0 (0.000000), must be greater than 0
 file:///usr/share/plasma/plasmoids/org.kde.plasma.battery/contents/ui/CompactRepresentation.qml:62:17: Unable to assign [undefined] to int
 QFont::setPointSizeF: Point size <= 0 (0.000000), must be greater than 0

[reinheaven]

sudo pacman -Syyu didn’t show any updates for me. Had to sudo pacman-mirrors -c Germany && sudo pacman -Syyu to find them.

Trying to understand, can anyone explain? Found that solution on the forums.

[Teo]

Your previous mirrors were not synced yet. Refreshing with pacman-mirrors makes a pool only from synced ones. Alternatively you could have waited an hour or two.

[Aragorn]

@Teo

Alternatively you could have waited an hour or two.

Or — gasp! — one could actually look at the man pages…

man pacman
man pacman-mirrors

[soundofthunder]

@Aragorn

Or — gasp! — one could actually look at the man pages…

Surely not…

[reinheaven]

Thank you for explaining!