Well, it went pretty well, given my config it’s pretty normal (5.4 LTS kernel , Xfce, Intel processor and Intel graphic chipset). I still had to hack a little to get Ninja-IDE to work (AUR (en) - Accounts & Python 3.9 break ninja-ide · Issue #2112 · ninja-ide/ninja-ide · GitHub) and reinstall all my Python user modules. Only pyarrow (essential for the covidify module) is a problem for me (pyarrow wheel for python 3.9 · Issue #9081 · apache/arrow · GitHub). I have to wait for a wheel to be available for Python 3.9.
Hi, I saw the notification from the homepage, I seem to be affected. can I ask If I’ll have an issue after updating, I’m kinda Noob, still just learning. What must I do before updating?
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "", LC_ALL = (unset), LC_MONETARY = "en_US.UTF-8", LC_MEASUREMENT = "en_SG.UTF-8", LC_TIME = "en_US.UTF-8", LC_NUMERIC = "en_GB.UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Host: Lair Kernel: 5.4.80-2-MANJARO x86_64 bits: 64 Desktop: KDE Plasma 5.20.4 Distro: Manjaro Linux Machine: Type: Laptop System: Dell product: Inspiron 5558 v: N/A serial: <superuser/root required> Mobo: Dell model: 0TYKPW v: A00 serial: <superuser/root required> UEFI: Dell v: A17 date: 05/14/2019 CPU: Info: Dual Core Intel Core i5-5200U [MT MCP] speed: 1685 MHz min/max: 500/2700 MHz Graphics: Device-1: Intel HD Graphics 5500 driver: i915 v: kernel Device-2: NVIDIA GK208BM [GeForce 920M] driver: N/A Device-3: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo Display: x11 server: X.Org 1.20.10 driver: intel resolution: 1920x1080~60Hz OpenGL: renderer: Mesa Intel HD Graphics 5500 (BDW GT2) v: 4.6 Mesa 20.2.3 Network: Device-1: Intel Wireless 3160 driver: iwlwifi Device-2: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169 Drives: Local Storage: total: 1.20 TiB used: 688.13 GiB (56.0%) Info: Processes: 191 Uptime: 1h 16m Memory: 7.69 GiB used: 3.09 GiB (40.1%) Shell: Bash inxi: 3.1.08
It worked (i had no doubt); i installed the rebuild-checker, and performed the system update with the italian mirrors, that are, for some for me unknwon reasons, a lot faster than the -f 3 argument (2-3 mbits against 200-300 kbits); thanks a lot Wollie.
This particular update gave me issues with audio popping/clicking noise when any program started or stopped using my sound card (Intel 7 Series/C216 Family High Definition Audio)… quite annoying with headphones. The “solution” I found was to disable power saving for the snd_hda_intel module, but I’m not too happy about having to do that. It was working fine for almost 2 years, and I haven’t modified my audio settings in those 2 years, so I’m not sure what’s going on.
package grub-customizer is not compatible with this update:
:: grub and grub-customizer are in conflict. Remove grub-customizer? [y/N]
Hi. I gave a second chance to manjaro. After clean installing OS I’m still struggling with the same problem. On first boot after installing whole OS i see in mhwd GUI that there is a 455 version of drivers are available to install. I am such a user that before using system I let the system update itself. That’s what I did, and unfortunately for me in mhwd GUI I lost all NVIDIA driver versions except 390 available to install. I have a GTX 650 Ti Super GPU and according to the NVIDIA website, for the latest released driver (455) my card is supported.
How to fix that to install latest NVIDIA driver 455 via mhwd?
inxi -Fazy
System:
Kernel: 5.10.2-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=c79209d9-8416-47b1-a8a9-472b737df337 rw quiet apparmor=1
security=apparmor resume=UUID=d358d149-6ed5-41f5-b20d-7683346173ac
udev.log_priority=3
Desktop: KDE Plasma 5.20.4 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux
Machine:
Type: Desktop Mobo: MSI model: Z270 PC MATE (MS-7A72) v: 1.0
serial: <filter> UEFI: American Megatrends v: 1.A0 date: 07/04/2018
CPU:
Info: Dual Core model: Intel Pentium G4560 bits: 64 type: MT MCP
arch: Kaby Lake family: 6 model-id: 9E (158) stepping: 9 microcode: DE
L2 cache: 3 MiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28009
Speed: 800 MHz min/max: 800/3500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800
4: 800
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GK106 [GeForce GTX 650 Ti] vendor: Micro-Star MSI
driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:11c6
Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: nouveau
unloaded: modesetting alternate: fbdev,nv,vesa display ID: :0 screens: 1
Screen-1: 0 s-res: 2880x900 s-dpi: 96 s-size: 762x238mm (30.0x9.4")
s-diag: 798mm (31.4")
Monitor-1: DVI-I-1 res: 1440x900 hz: 60 dpi: 89 size: 410x257mm (16.1x10.1")
diag: 484mm (19.1")
Monitor-2: DVI-D-1 res: 1440x900 hz: 60 dpi: 90 size: 408x255mm (16.1x10.0")
diag: 481mm (18.9")
OpenGL: renderer: NVE6 v: 4.3 Mesa 20.3.1 direct render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:a2f0
Device-2: NVIDIA GK106 HDMI Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:0e0b
Sound Server: ALSA v: k5.10.2-2-MANJARO
Network:
Device-1: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e
v: kernel port: f000 bus ID: 00:1f.6 chip ID: 8086:15b8
IF: enp0s31f6 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 698.65 GiB used: 9.85 GiB (1.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 250GB size: 232.89 GiB block size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 2B2QEXM7
temp: 33.9 C
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST500DM002-1BD142
size: 465.76 GiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: KC44
Partition:
ID-1: / raw size: 223.79 GiB size: 219.28 GiB (97.98%) used: 9.85 GiB (4.5%)
fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%)
used: 312 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: nouveau temp: 27.0 C
Fan Speeds (RPM): N/A gpu: nouveau fan: 1080
Info:
Processes: 189 Uptime: 45m wakeups: 0 Memory: 7.73 GiB
used: 2.15 GiB (27.8%) Init: systemd v: 247 Compilers: gcc: N/A Packages:
pacman: 1273 lib: 381 flatpak: 0 Shell: Bash v: 5.1.0 running in: konsole
inxi: 3.2.01
find /var/lib/mhwd -type f -name "*.old"
/var/lib/mhwd/db/pci/graphic_drivers/hybrid-intel-nvidia-prime/MHWDCONFIG.old
/var/lib/mhwd/db/pci/graphic_drivers/nvidia/MHWDCONFIG.old
/var/lib/mhwd/db/pci/graphic_drivers/hybrid-amd-nvidia-prime/MHWDCONFIG.old
/var/lib/mhwd/ids/pci/nvidia.ids.old
mhwd -la
> All PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-virtualmachine 2020.03.26 true PCI
video-sisusb 2020.01.18 true PCI
video-linux 2018.05.04 true PCI
video-nvidia-390xx 2020.11.30 false PCI
video-s3 2020.01.18 true PCI
video-vesa 2017.03.12 true PCI
video-voodoo 2017.03.12 true PCI
video-hybrid-intel-nvidia-390xx-bumblebee 2020.11.30 false PCI
video-modesetting 2020.01.13 true PCI
video-openchrome 2020.01.18 true PCI
video-rendition 2020.01.18 true PCI
network-rt3562sta 2013.12.07 true PCI
network-slmodem 2013.12.07 true PCI
network-r8168 2016.04.20 true PCI
network-broadcom-wl 2018.10.07 true PCI
Warning: No USB configs found!
dont care about fisrt post , so you dont read
sudo mhwd -a pci nonfree 0300
I updated my system then rebooted and got the following message on screen:-
Warning: /lib/modules/5.10.2-2-MANJARO/modules.devname not found - ignoring
mount: /new_root: unknown filesystem type ‘ext4’.
You are now being dropped into an emergency shell.
sh: can’t access tty; job control turned off
[rootfs ]#
My keyboard and mouse don’t work when this message is displayed.
Please help
Do you still have another kernel version installed?
Enter grub menu by press and hold ESC key.
In grub, go to advanced options (not sure how exactly it is called) and try the fallback image or another kernel version if installed.
If you get into your system again, reinstall the kernel:
sudo pacman -S linux510
If not, you will need to chroot into you install. Follow @stephane’s link for instructions.
I assume this is for the btrfs filesystem? At the same time, the #DefaultFileSystemType
in /etc/systemd/homed.conf
changed from ext4
to btrfs
.
No, had this on XFS not on BTRFS
Testing XFS in VM
Same problem here on my daughters computer. She has a NVidia card.
Hi @Katharsisdrill,
Please see here. I believe it’s either the same or related.
I sincerely hope this helps.
So after updating I ran the command:
sudo mhwd -a pci nonfree 0300
and when I try to play CS GO using Steam I get 9fps.
I’m using kernal 5.10.2-2 and nvidia-390xx
Thanks Taylor. I didn’t have a Timeshift backup but uninstalling the Nvidia drivers and mhwd allowed me to boot Manjaro up again. I have installed kernel 5.10 and the package linux510-nvidia however 455 driver is not listed for install in Manjaro Settings Manager.
The new nVidia package is now called video-nvidia
See also: My switch to the 5.10 kernel with update 2020-12-30
Hello,
I don’t want have troubles, when I do a complete update.
On my other System with nVidia I can not use xbacklight anymore, and the Update made some strange changes which I don’t understand. I don’t understand how I can solve my nVidia Problems.
What means
Kann Abhängigkeiten nicht erfüllen:
- das Entfernen von mhwd-db verletzt Abhängigkeit von ‘mhwd-db’ benötigt von mhwd,
- wenn möglich, entferne mhwd und versuche es erneut
Also if I ignore all needed updates and want only update FF, this message appear.
What have FF to do with mhwd? confused
There are a lot packages with “mhwd” installed. Or does it mean, that I only have to uninstall the package mhwd-db 0.6.5-4? And otherwise the update ist not running fine?
On my actual bootet System there is no nVidia driver, so I guess there will be no problems when I update? Kernel 5.4.85-1
[me@me ~]$ mhwd -l
> 0000:01:00.0 (0300:10de:11bd) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-nvidia-418xx 2020.10.04 false PCI
video-nvidia-390xx 2020.10.04 false PCI
video-nvidia-340xx 2020.10.04 false PCI
video-linux 2018.05.04 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
Thx TM
I’ve got installed nvidia-utils and linux510-nvidia and nothing else. Still I can’t manage to install any nvidia drivers with mhwd -a pci nonfree 0300 or listed in Manjaro Hardware Configuration.