Sometimes, when I’m at lockscreen, I cannot login without restart of computer. Any ideas?
Welcome to Manjaro!
-
Please read this:
How to provide good information
and post some more information so we can see what’s really going on. Now we know the symptom of the disease, but we need some more probing to know where the origin lies… -
An
inxi --admin --verbosity=7 --filter --no-host --width
would be the minimum required information… (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
P.S. If you enter a bit more details in your profile, we can also see which Desktop Environment you’re using, which CPU/GPU or Kernel, … you have without typing it every time
System: Kernel: 5.10.15-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=94f9602d-02b7-474c-b38c-cdc69c675b4a ro quiet cryptdevice=UUID=11a3a9a0-4090-4f5b-9b7e-d9b0067abf6d:luks-11a3a9a0-4090-4f5b-9b7e-d9b0067abf6d
root=/dev/mapper/luks-11a3a9a0-4090-4f5b-9b7e-d9b0067abf6d apparmor=1 security=apparmor
resume=/dev/mapper/luks-14390a19-60db-4150-8063-c96236d21a19 udev.log_priority=3
Desktop: KDE Plasma 5.20.5 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux Machine: Type: Laptop System: Dell product: Precision 3530 v: N/A serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Dell model: 0T36NT v: A00 serial: <filter> UEFI: Dell v: 1.6.1
date: 01/11/2019
Battery: ID-1: BAT0 charge: 59.3 Wh condition: 59.3/68.0 Wh (87%) volts: 8.5/7.6
model: LGC-LGC8.820 DELL DV9NT92 type: Li-ion serial: <filter> status: Full
Memory: RAM: total: 15.43 GiB used: 2.63 GiB (17.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU: Info: 6-Core model: Intel Core i7-8750H bits: 64 type: MT MCP
arch: Kaby Lake note: check family: 6 model-id: 9E (158) stepping: A (10)
microcode: DE L2 cache: 9 MiB bogomips: 52815 Speed: 801 MHz min/max: 800/4100 MHz Core speeds (MHz): 1: 801 2: 800 3: 800 4: 800 5: 801 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 801
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel UHD Graphics 630 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:3e9b class ID: 0300
Device-2: NVIDIA GP107GLM [Quadro P600 Mobile] driver: nvidia v: 460.39 alternate: nouveau,nvidia_drm bus ID: 01:00.0 chip ID: 10de:1cbc class ID: 0302
Device-3: Realtek Integrated Webcam HD type: USB driver: uvcvideo bus ID: 1-11:3 chip ID: 0bda:568c class ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: loaded: modesetting,nvidia alternate: fbdev,intel,nouveau,nv,vesa
display ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9")
Monitor-1: eDP-1 res: 1920x1080 dpi: 142 size: 344x194mm (13.5x7.6") diag: 395mm (15.5")
OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 20.3.4 direct render: Yes
Audio: Device-1: Intel Cannon Lake PCH cAVS vendor: Dell driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci bus ID: 00:1f.3 chip ID: 8086:a348 class ID: 0403 Sound Server: ALSA v: k5.10.15-1-MANJARO
Network: Device-1: Intel Wireless-AC 9560 [Jefferson Peak] driver: iwlwifi v: kernel port: 4000 bus ID: 00:14.3 chip ID: 8086:a370 class ID: 0280 IF: wlo1 state: down mac: <filter> Device-2: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: efa0 bus ID: 00:1f.6 chip ID: 8086:15bb class ID: 0200 IF: eno2 state: up speed: 1000 Mbps duplex: full mac: <filter> IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter> IP v6: <filter> type: noprefixroute scope: link WAN IP: <filter>
Bluetooth: Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB driver: btusb v: 0.8 bus ID: 1-14:4 chip ID: 8087:0aaa class ID: e001 Message: Required tool hciconfig not installed. Check --recommends
RAID: Message: No RAID data was found.
Drives: Local Storage: total: 707.75 GiB used: 50.11 GiB (7.1%) SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: PC401 NVMe 512GB size: 476.94 GiB block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD serial: <filter> rev: 80007E00 temp: 26.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Patriot model: N/A size: 230.81 GiB block size: physical: 512 B logical: 512 B serial: <filter> rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Message: No Optical or Floppy data was found.
Partition:
ID-1: / raw size: 459.66 GiB size: 451.45 GiB (98.21%) used: 50.11 GiB (11.1%) fs: ext4 dev: /dev/dm-0 maj-min: 254:0 mapped: luks-11a3a9a0-4090-4f5b-9b7e-d9b0067abf6d label: N/A uuid: 94f9602d-02b7-474c-b38c-cdc69c675b4a
ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%) used: 484 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A uuid: 2B36-0EE4
Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 16.97 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/dm-1 maj-min: 254:1 mapped: luks-14390a19-60db-4150-8063-c96236d21a19 label: N/A uuid: 4b7172b6-d687-49c4-a741-d8333b9a3384 Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 3 GiB fs: iso9660 label: MANJARO_KDE_2021 uuid: 2021-01-03-09-07-36-00
ID-2: /dev/sda2 maj-min: 8:2 size: 4 MiB fs: vfat label: MISO_EFI uuid: 7B2D-7571
ID-3: /dev/sda3 maj-min: 8:3 size: 8 GiB fs: ext4 label: DATA uuid: 08d2034b-0658-4702-81af-a87c1eabe31a ID-4: /dev/sda4 maj-min: 8:4 size: 24.19 GiB fs: ext4 label: DATA II uuid: fe9a6fdd-1a52-453f-b4cc-923faaf9dd54 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 Device-1: 1-10:2 info: Broadcom 5880 type: Smart Card driver: N/A interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 0a5c:5832 class ID: 0b00 serial: <filter> Device-2: 1-11:3 info: Realtek Integrated Webcam HD type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0bda:568c class ID: 0e02 serial: <filter> Device-3: 1-14:4 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 8087:0aaa class ID: e001 Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 10 rev: 3.1 speed: 10 Gb/s chip ID: 1d6b:0003 class ID: 0900 Device-1: 2-3:2 info: Kingston Patriot Memory type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 13fe:6000 class ID: 0806 serial: <filter>
Sensors:
System Temperatures: cpu: 41.0 C mobo: N/A
Fan Speeds (RPM): cpu: 2299
Info: Processes: 307 Uptime: 5m wakeups: 1 Init: systemd v: 247 Compilers: gcc: 10.2.0 Packages: pacman: 1307 lib: 380 flatpak: 0 Shell: Bash v: 5.1.0 default: Zsh v: 5.8 running in: konsole inxi: 3.3.01
It happens, when I switch keyboards… Because I have two keyboard layouts I switch, and when I switch them, and freeoffice is running, I cannot login.
I am having the same issue on an Intel NUC. I don’t have two keyboard layouts. I noticed that when this happens the date/time on the logon screen is incorrect.
System:
Kernel: 5.9.16-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.9-x86_64
root=UUID=7f963a81-7f04-4d3b-947f-3ac076075df2 ro quiet apparmor=1
security=apparmor resume=UUID=ce80265c-6292-4dd7-a02d-0f32f620368c
udev.log_priority=3
Desktop: KDE Plasma 5.21.1 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux
Machine:
Type: Mini-pc System: Intel Client Systems product: NUC8i5BEH v: J72747-308
serial: <filter> Chassis: Intel Corporation type: 35 v: 2.0 serial: <filter>
Mobo: Intel model: NUC8BEB v: J72692-310 serial: <filter> UEFI: Intel
v: BECFL357.86A.0087.2020.1209.1115 date: 12/09/2020
Memory:
RAM: total: 15.51 GiB used: 4.47 GiB (28.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Quad Core model: Intel Core i5-8259U bits: 64 type: MT MCP
arch: Kaby Lake note: check family: 6 model-id: 8E (142) stepping: A (10)
microcode: E0 L2 cache: 6 MiB bogomips: 36812
Speed: 900 MHz min/max: 400/3800 MHz Core speeds (MHz): 1: 900 2: 900 3: 900
4: 900 5: 900 6: 899 7: 900 8: 900
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Iris Plus Graphics 655 driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:3ea5 class ID: 0300
Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver:
loaded: intel unloaded: modesetting alternate: fbdev,vesa display ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: DP1 res: 1920x1080 dpi: 81 size: 600x340mm (23.6x13.4")
diag: 690mm (27.2")
OpenGL: renderer: Mesa Intel Iris Plus Graphics 655 (CFL GT3)
v: 4.6 Mesa 20.3.4 direct render: Yes
Audio:
Device-1: Intel Cannon Point-LP High Definition Audio driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci bus ID: 00:1f.3
chip ID: 8086:9dc8 class ID: 0403
Sound Server: ALSA v: k5.9.16-1-MANJARO
Network:
Device-1: Intel Cannon Point-LP CNVi [Wireless-AC] driver: iwlwifi v: kernel
port: 4000 bus ID: 00:14.3 chip ID: 8086:9df0 class ID: 0280
IF: wlp0s20f3 state: down mac: <filter>
Device-2: Intel Ethernet I219-V driver: e1000e v: kernel port: efa0
bus ID: 00:1f.6 chip ID: 8086:15be class ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
IP v4: <filter> scope: global broadcast: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB
driver: btusb v: 0.8 bus ID: 1-10:4 chip ID: 8087:0aaa class ID: e001
Message: Required tool hciconfig not installed. Check --recommends
RAID:
Message: No RAID data was found.
Drives:
Local Storage: total: 2.29 TiB used: 292.03 GiB (12.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Silicon Power
model: SPCC M.2 PCIe SSD size: 476.94 GiB block size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD serial: <filter>
rev: EDFM20.0 temp: 7.8 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 2TB
size: 1.82 TiB block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
rotation: SSD serial: <filter> rev: 4B6Q
Message: No Optical or Floppy data was found.
Partition:
ID-1: / raw size: 459.58 GiB size: 451.37 GiB (98.21%)
used: 16.09 GiB (3.6%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid: 7f963a81-7f04-4d3b-947f-3ac076075df2
ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%)
used: 312 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
uuid: A733-6D2B
ID-3: /mnt/DATA raw size: 1.82 TiB size: 1.79 TiB (98.38%)
used: 275.94 GiB (15.1%) fs: ext4 dev: /dev/sda maj-min: 8:0 label: N/A
uuid: a11920cd-7ba0-4e47-b124-ac8073e4641f
Swap:
Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 17.06 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A
uuid: ce80265c-6292-4dd7-a02d-0f32f620368c
Unmounted:
Message: No Unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900
Device-1: 1-3:2 info: Microsoft Comfort Curve Keyboard 3000
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 1.5 Mb/s chip ID: 045e:07b6 class ID: 0300
Device-2: 1-4:3 info: Chicony Amazon Basics mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
chip ID: 04f2:0939 class ID: 0301
Device-3: 1-10:4 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP)
type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
chip ID: 8087:0aaa class ID: e001
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.1 speed: 10 Gb/s
chip ID: 1d6b:0003 class ID: 0900
Sensors:
System Temperatures: cpu: 45.0 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Info:
Processes: 306 Uptime: 3h 56m wakeups: 0 Init: systemd v: 247 Compilers:
gcc: 10.2.0 Packages: pacman: 1332 lib: 395 flatpak: 0 Shell: Bash v: 5.1.0
running in: konsole inxi: 3.3.01
-
In the future, when providing code/output, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text so that the output looks like this:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
instead of like this:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
(as that makes both our lives much easier as I had to put a bunch of Enter back in after you took them out to make your post readable)
-
No need to do anything right now as I’m an editor here on this site and have fixed it for you already. However, in the future I might not see your post so review my edits by pushing the orange pencil above the post I just fixed.
-
Please reboot using this procedure and provide the output of:
journalctl --system --boot=-1 | tail --lines=30 tail --lines=30 /var/log/Xorg.1.log
@carloss66 If you have a similar issue, better wait for a resolution of the original and if the solution doesn’t work, please feel free to create your own topic linking back to this one and why this one didn’t work.