Scared to reboot - HOOKS migration required?

Just installed the new STABLE update and now I need reassurance my system does boot next time I reboot my machine. :slight_smile:

sudo diff -u /etc/default/grub /etc/default/grub.pacnew
sudo diff -u /etc/mkinitcpio.conf /etc/mkinitcpio.conf.pacnew

included here:

should I add these?
sudo diff -u /etc/pam.d/sddm /etc/pam.d/sddm.pacnew
sudo diff -u /etc/pam.d/kde /etc/pam.d/kde.pacnew

before starting the HOOK migration?

suggested method to follow - is it proper one?

 # 1. Backup your old config
sudo cp /etc/mkinitcpio.conf /etc/mkinitcpio.conf.backup

# 2. Merge the new config (carefully!)
# The safest way is to replace HOOKS line manually, but let's do it safely:
sudo sed -i 's/^HOOKS=.*/HOOKS=(base systemd autodetect microcode modconf kms keyboard sd-vconsole block filesystems fsck)/' /etc/mkinitcpio.conf

# 3. Verify the change
grep "^HOOKS" /etc/mkinitcpio.conf

# 4. REBUILD ALL INITRAMFS IMAGES WITH THE NEW CONFIG
sudo mkinitcpio -P

Instead of blindly following oneliners some ai spitted out, if you really want to understand the config, just open it with a text editor.
I am not a sed expert so no idea if the automatic replacement will work, but the array with hooks looks ok.
You also have remnants of kernel 5.19 which you can delete and the preset.
Passwd should not be touched, tpm.pacnew can be replaced with the new version. The grub pacnew is only important if you have too many boot entries.
No idea for ssdm and kde stuff - if you want advice better post the new and old one so man can compare.
The proper way by the way to work with pacnews is pacdiff -s.

I do not wish to follow AI. I need users’ input, but second opinion is always valuable.

here goes:

[~]$ sudo diff -u /etc/pam.d/sddm /etc/pam.d/sddm.pacnew

diff: /etc/pam.d/sddm: No such file or directory

$ sudo diff -u /etc/pam.d/kde /etc/pam.d/kde.pacnew
diff: /etc/pam.d/kde: No such file or directory

Soooo …the files just do not exist?!
I am no kde user, somebody with kde should look at it and say if those have to be there and if there is pacnew.

i think its quiet a while since your last update.
i just looked up the files. I do have a /etc/pam.d/sddm which is from 2024 which seems outdated cause of pam_kwallet5.so ?

/etc/pam.d/sddm
#%PAM-1.0

auth		include		system-login
auth		optional	pam_kwallet5.so
account		include		system-login
password	include		system-login
session		include		system-login
session		optional	pam_kwallet5.so auto_start

but no /etc/pam.d/kde (only the standard on in /usr/lib/pam.d which looks like

#%PAM-1.0

auth       include                     system-local-login

account    include                     system-local-login

password   include                     system-local-login

session    include                     system-local-login

hope it helps…

I would recommend using meld for comparison … it makes it much easier to understand the changes.

Update:
just browsed your pastebin…
Got the grub.conf.pacnew myself. The only thing i changed was adding the rd. infront of udev.log_priority=3. So your line will look:

GRUB_CMDLINE_LINUX_DEFAULT="quiet rd.udev.log_priority=3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1"

i also addes the new variables at the end but commented it out.

# See also Arch-Wiki: https://wiki.archlinux.org/title/Fsck#Boot_time_checking
#GRUB_ROOT_FS_RO=true
# Disable generating menu entries for other EFI boot manager entries detected
#GRUB_DISABLE_BOOTNEXT=true

# Skip EFI boot manager entries that are marked inactive
# when when generating bootnext entries
#GRUB_BOOTNEXT_OMIT_INACTIVE=true

Edit the HOOKs in your /etc/mkinitcpio.conf to
HOOKS=(base systemd autodetect microcode modconf kms block keyboard sd-vconsole filesystems fsck)
so its ok to run the 4 commands in your post.

with that it should be save to reboot.
but dont forget to check also the rest of the pacnews.

It is tad complicated for my brain.

first this:
GRUB_CMDLINE_LINUX_DEFAULT=“quiet rd.udev.log_priority=3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1”

then the 4 commands suggested above?

in this particular order? exactly in this order?

# 1. Backup your old config
sudo cp /etc/mkinitcpio.conf /etc/mkinitcpio.conf.backup

# 2. Merge the new config (carefully!)
# The safest way is to replace HOOKS line manually, but let's do it safely:
sudo sed -i 's/^HOOKS=.*/HOOKS=(base systemd autodetect microcode modconf kms keyboard sd-vconsole block filesystems fsck)/' /etc/mkinitcpio.conf

# 3. Verify the change
grep "^HOOKS" /etc/mkinitcpio.conf

# 4. REBUILD ALL INITRAMFS IMAGES WITH THE NEW CONFIG
sudo mkinitcpio -P

If you mean 1-4: One usually backs up something before doing the change, not after :winking_face_with_tongue: So yes, backup if you want, change, verify if you want, regenerate config, obligatory.
The hooks are fine. Their order is extremely important. I would still do it manually in a text editor like micro, just to see how the file looks like.

This is the main reason i wrote maxi (without AI, so it may contain human errors)
:footprints:

Summary
> maxi
maxi v0.7.28 (2026-07-26 17:15)
Currently running: 7.2.9-1-MANJARO (linux72)
 linux612 vmlinuz-6.12-x86_64 initramfs-6.12-x86_64.img=227M fallback=429M
 linux618 vmlinuz-6.18-x86_64 initramfs-6.18-x86_64.img=323M fallback=525M
 linux72  vmlinuz-7.2-x86_64  initramfs-7.2-x86_64.img =331M fallback=543M
Info about: /lib/modules
 modules612 6.12.112-1-MANJARO=170M <none>=
 modules618 6.18.55-1-MANJARO =176M <none>=
 modules72  7.2.9-1-MANJARO   =180M <none>=
> maxi -g
maxi v0.7.28 (2026-07-26 17:15)
Currently running: 7.2.9-1-MANJARO (linux72)
Info about: /etc/default/grub
 Please update grub.cfg:/boot/grub/grub.cfg <is older than> /etc/default/grub
   GRUB_DEFAULT              =saved
   GRUB_TIMEOUT              =5
   GRUB_DISTRIBUTOR          ="Manjaro"
 # GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=3 rd.udev.log_level=3"
   GRUB_CMDLINE_LINUX_DEFAULT="apparmor=1 security=apparmor loglevel=3 rd.udev.log_level=3"
   GRUB_CMDLINE_LINUX        =""
   GRUB_PRELOAD_MODULES      ="part_gpt part_msdos"
 # GRUB_TIMEOUT_STYLE        =hidden
   GRUB_TIMEOUT_STYLE        =menu
   GRUB_THEME                ="/usr/share/grub/themes/manjaro/theme.txt"
   GRUB_SAVEDEFAULT          =false
   GRUB_DISABLE_OS_PROBER    =false
[~]$ sha256sum /usr/local/bin/maxi
b15a083beafe952e462f3b48b780f8b3818387ef0eceb387e4821a5a077bae1f  /usr/local/bin/maxi
[rafal@estudio ~]$ sudo chmod -c a+x /usr/local/bin/maxi
mode of '/usr/local/bin/maxi' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x)
[rafal@estudio ~]$ maxi -kmf
maxi v0.7.28 (2026-07-26 17:15)
Currently running: 6.18.49-1-MANJARO (linux618)
 linux612 vmlinuz-6.12-x86_64 initramfs-6.12-x86_64.img=22M fallback=<none>
 linux618 vmlinuz-6.18-x86_64 initramfs-6.18-x86_64.img=22M fallback=<none>
Info about: /lib/modules
 modules612 6.12.112-1-MANJARO=346M <none>=
 modules618 6.18.55-1-MANJARO =365M <none>=

Press ENTER to proceed.


[~]$ maxi -kmsgeif
maxi v0.7.28 (2026-07-26 17:15)
Currently running: 6.18.49-1-MANJARO (linux618)
 linux612 vmlinuz-6.12-x86_64∑502d~4292 initramfs-6.12-x86_64.img=22M fallback=<none>∑<sha?>
 linux618 vmlinuz-6.18-x86_64∑61c0~1af1 initramfs-6.18-x86_64.img=22M fallback=<none>∑<sha?>
Info about: /lib/modules Checksumming all modules may take a while
 modules612 6.12.112-1-MANJARO=346M∑<sha?> <none>=∑<sha?>
 modules618 6.18.55-1-MANJARO =365M∑<sha?> <none>=∑<sha?>
Info about: /etc/default/grub
 GRUB_DEFAULT              =saved
 GRUB_TIMEOUT              =2
 GRUB_TIMEOUT_STYLE        =menu
 GRUB_DISTRIBUTOR          ="Manjaro"
 GRUB_CMDLINE_LINUX_DEFAULT="quiet udev.log_priority=3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1"
 GRUB_CMDLINE_LINUX        =""
 GRUB_SAVEDEFAULT          =true
 GRUB_PRELOAD_MODULES      ="part_gpt part_msdos"
 GRUB_DISABLE_OS_PROBER    =false
 GRUB_THEME                ="/usr/share/grub/themes/manjaro/theme.txt"
Info about: /etc/mkinitcpio.conf
   MODULES                   =()
   BINARIES                  =()
   FILES                     =()
   HOOKS                     =(base udev autodetect modconf kms block keyboard keymap consolefont filesystems fsck)
 # COMPRESSION               ="gzip"
 # COMPRESSION               ="bzip2"
 # COMPRESSION               ="lzma"
 # COMPRESSION               ="xz"
 # COMPRESSION               ="lzop"
 # COMPRESSION               ="lz4"
 # COMPRESSION               ="zstd"
 # COMPRESSION_OPTIONS       =()
 # MODULES_DECOMPRESS        ="yes"
Info about: efi bootloaders
 7a57~b0e7 164K /boot/grub/x86_64-efi/grub.efi /include/grub
 7a57~b0e7 164K /boot/grub/x86_64-efi/core.efi /include/grub
Info about: efi vars (needs efibootmgr)
 Boot0000* Manjaro              HD(5,GPT,ebcd389e-dcb1-8546-8108-3ccf44722d0b,0x1fef6800,0x96000)
 Boot0001* Windows Boot Manager HD(1,GPT,2a2420df-fd06-4071-935a-7261bb91bf5f,0x800,0x32000)

now we have all the info we need, right? YES, i am still waiting for the approval of my steps… bear with me.

In my opinion the infos are fine.
To get the big picture you could post the output of inxi -zv8. (to satisfy [HowTo] Request support I’m really surprised that no one has complained yet)
Okay, I’ll summarize it briefly:

  1. (optional and redundant when comment out the old HOOKs line and add the new line under the old) Backup your old config sudo cp /etc/mkinitcpio.conf /etc/mkinitcpio.conf.backup

  2. Edit the HOOKS line in your /etc/mkinitcpio.conf by using one of the following options
    Option a) execute this in your shell: sudo sed -i 's/^HOOKS=.*/HOOKS=(base systemd autodetect microcode modconf kms block keyboard sd-vconsole filesystems fsck)/' /etc/mkinitcpio.conf
    OR
    Option b) (usual the prevered way) open the file in editor with
    sudo nano /etc/mkinitcpio.conf and add a # at the beginning of the existing HOOKS= line ( disables the line by marking it as a comment)
    and add the new HOOKS line beneath the old one:
    HOOKS=(base systemd autodetect microcode modconf kms block keyboard sd-vconsole filesystems fsck)

  3. regenerate mikinitcpio by using
    sudo mkinitcpio -P

  4. edit the /etc/default/grub by using this:

    • open the file in editor: sudo nano /etc/default/grub
    • change the line GRUB_CMDLINE_LINUX_DEFAULT=... by addig a rd. in front of udev. so the result looks like this:
      GRUB_CMDLINE_LINUX_DEFAULT="quiet rd.udev.log_priority=3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1"
    • save the file with CTRL + o and confirm with ENTER
    • exit nano with CTRL + x
  5. regenerate Grub using sudo grub-mkconfig -o /boot/grub/grub.cfg

after that it should be save to reboot.

Next, you should check the .pacnew files using the following command:
DIFFPROG=meld pacdiff -s
Assuming you have meld installed—which I highly recommend, since it allows you to view the changes and edit the files directly in the same window.
You can install meld with pacman -S meld.

How about reboot, check what happens and go from there. As it is now, it’s all mental gymnastics

for /etc/default/grub, the GRUB boot parameters must be changed and GRUB updated before system restart

Untitled (0p2u6wsy) - PasteCode.io
$ sudo diff -u /etc/default/grub /etc/default/grub.pacnew
— /etc/default/grub 2025-12-12 12:18:27.975690585 +0100
+++ /etc/default/grub.pacnew 2026-10-28 17:46:29.000000000 +0100
@@ -1,23 +1,21 @@
+# GRUB boot loader configuration

-GRUB_CMDLINE_LINUX_DEFAULT=“quiet udev.log_priority=3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1”
+GRUB_CMDLINE_LINUX_DEFAULT=“quiet loglevel=3 rd.udev.log_level=3”

I would also recommend using meld to compare files, but KDE users may prefer to use kcompare

There are 2 Kernels installed, and the initramdisk for them is present

You will see Grub menu for 2 Seconds, but you need to merge the .pacnew for grub first.

Your EFI Bootloaders (including fallback) are present, and you have EFI Vars pointing to your Bootloaders

That’s no guarantee that everything will go smoothly. But the “usual suspects”—the common causes for a system failing to boot—are all fine.

If this were my computer, I wouldn’t be worried about booting it up (after merging the .pacnews) :wink:
:footprints:

System:
  Kernel: 6.18.49-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 16.2.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.18-x86_64
    root=UUID=d540af20-98bf-4853-84e1-5bce691c998d rw quiet
    udev.log_priority=3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1
  Desktop: KDE Plasma v: 6.7.5 tk: Qt v: N/A info: frameworks v: 6.30.0
    wm: kwin_x11 with: krunner vt: 2 dm: N/A Distro: Manjaro base: Arch Linux
Machine:
  Type: Laptop System: Acer product: Swift SF314-511 v: V1.10
    serial: <superuser required>
  Mobo: TGL model: Sake_TL v: V1.10 serial: <superuser required>
    part-nu: 0000000000000000 uuid: <superuser required> Firmware: UEFI
    vendor: Insyde v: 1.10 date: 09/16/2021
Battery:
  ID-1: BAT1 charge: 22.2 Wh (55.5%) condition: 40/56 Wh (71.5%) volts: 14.73
    min: 15.4 model: SMP AP18C7M type: Li-ion serial: <filter> charging:
    status: discharging cycles: 84
Memory:
  System RAM: total: 16 GiB available: 15.41 GiB used: 5.3 GiB (34.4%)
  Message: For most reliable report, use superuser + dmidecode.
  Array-1: capacity: 16 GiB slots: 8 modules: 8 EC: None
    max-module-size: 2 GiB note: est.
  Device-1: Controller0-ChannelA type: LPDDR4 detail: synchronous
    size: 2 GiB speed: 4267 MT/s volts: curr: 0.6 width (bits): data: 16
    total: 16 manufacturer: Micron Technology part-no: 53E1G32D2NP-046
    serial: N/A
  Device-2: Controller0-ChannelB type: LPDDR4 detail: synchronous
    size: 2 GiB speed: 4267 MT/s volts: curr: 0.6 width (bits): data: 16
    total: 16 manufacturer: Micron Technology part-no: 53E1G32D2NP-046
    serial: N/A
  Device-3: Controller0-ChannelC type: LPDDR4 detail: synchronous
    size: 2 GiB speed: 4267 MT/s volts: curr: 0.6 width (bits): data: 16
    total: 16 manufacturer: Micron Technology part-no: 53E1G32D2NP-046
    serial: N/A
  Device-4: Controller0-ChannelD type: LPDDR4 detail: synchronous
    size: 2 GiB speed: 4267 MT/s volts: curr: 0.6 width (bits): data: 16
    total: 16 manufacturer: Micron Technology part-no: 53E1G32D2NP-046
    serial: N/A
  Device-5: Controller1-ChannelA type: LPDDR4 detail: synchronous
    size: 2 GiB speed: 4267 MT/s volts: curr: 0.6 width (bits): data: 16
    total: 16 manufacturer: Micron Technology part-no: 53E1G32D2NP-046
    serial: N/A
  Device-6: Controller1-ChannelB type: LPDDR4 detail: synchronous
    size: 2 GiB speed: 4267 MT/s volts: curr: 0.6 width (bits): data: 16
    total: 16 manufacturer: Micron Technology part-no: 53E1G32D2NP-046
    serial: N/A
  Device-7: Controller1-ChannelC type: LPDDR4 detail: synchronous
    size: 2 GiB speed: 4267 MT/s volts: curr: 0.6 width (bits): data: 16
    total: 16 manufacturer: Micron Technology part-no: 53E1G32D2NP-046
    serial: N/A
  Device-8: Controller1-ChannelD type: LPDDR4 detail: synchronous
    size: 2 GiB speed: 4267 MT/s volts: curr: 0.6 width (bits): data: 16
    total: 16 manufacturer: Micron Technology part-no: 53E1G32D2NP-046
    serial: N/A
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP
    arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020
    process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xBE
  Topology: cpus: 1x dies: 1 clusters: 4 cores: 4 threads: 8 tpc: 2
    smt: enabled cache: L1: 320 KiB desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB
    desc: 4x1.2 MiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 1111 min/max: 400/2400 scaling: driver: intel_pstate
    governor: powersave cores: 1: 1111 2: 1111 3: 1111 4: 1111 5: 1111 6: 1111
    7: 1111 8: 1111 bogomips: 38707
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 avx512_bitalg avx512_vbmi2
    avx512_vnni avx512_vp2intersect avx512_vpopcntdq avx512bw avx512cd
    avx512dq avx512f avx512ifma avx512vbmi avx512vl bmi1 bmi2 bts cat_l2
    cdp_l2 clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16
    cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
    flush_l1d fma fpu fsgsbase fsrm fxsr gfni ht hwp hwp_act_window hwp_epp
    hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt ida intel_pt invpcid
    lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b movdiri msr mtrr
    nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs
    pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed rdt_a rdtscp
    rep_good sdbg sep sha_ni smap smep split_lock_detect ss ssbd sse sse2
    sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
    tsc_deadline_timer tsc_known_freq umip user_shstk vaes vme vmx vnmi
    vpclmulqdq vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology
    xtpr
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: ghostwrite status: Not affected
  Type: indirect_target_selection mitigation: Aligned branch/return thunks
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: old_microcode status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
    conditional; PBRSB-eIBRS: SW sequence; BHI: SW loop, KVM: SW loop
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics]
    vendor: Acer Incorporated ALI driver: i915 v: kernel arch: Xe
    process: Intel 10nm built: 2020-21 ports: active: eDP-1
    empty: DP-1,DP-2,HDMI-A-1 bus-ID: 0000:00:02.0 chip-ID: 8086:9a49
    class-ID: 0300
  Device-2: Chicony HD User Facing driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-5:4 chip-ID: 04f2:b6dd
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 21.1.24 with: Xwayland v: 24.1.13
    compositor: kwin_x11 driver: X: loaded: modesetting alternate: fbdev,vesa
    dri: iris gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: AU Optronics 0xda91 built: 2020 res:
    mode: 1920x1080 hz: 60 scale: 100% (1) dpi: 158 gamma: 1.2 chroma: red:
    x: 0.651 y: 0.329 green: x: 0.290 y: 0.608 blue: x: 0.149 y: 0.055 white:
    x: 0.314 y: 0.329 size: 309x174mm (12.17x6.85") diag: 355mm (14")
    ratio: 16:9 modes: 1920x1080
  API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
    device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris x11: drv: iris
    inactive: wayland
  API: OpenGL v: 4.6 vendor: intel mesa v: 26.2.4-arch1.1 glx-v: 1.4
    direct-render: yes renderer: Mesa Intel Iris Xe Graphics (TGL GT2)
    device-ID: 8086:9a49 memory: 15.05 GiB unified: yes
  API: Vulkan v: 1.4.363 layers: 2 device: 0 type: integrated-gpu name: Intel
    Iris Xe Graphics (TGL GT2) driver: mesa intel v: 26.2.4-arch1.1
    device-ID: 8086:9a49 surfaces: N/A
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
    de: kscreen-console,kscreen-doctor wl: wayland-info
    x11: xdpyinfo, xprop, xrandr
Audio:
  Device-1: Intel 500 Series Family On-Package High Definition Audio
    vendor: Acer Incorporated ALI driver: sof-audio-pci-intel-tgl
    bus-ID: 0000:00:1f.3 chip-ID: 8086:a0c8 class-ID: 0401
  Device-2: AOKEO LCS_USB_Audio driver: snd-usb-audio type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-1:15 chip-ID: 2e3c:4444
    class-ID: 0102 serial: <filter>
  API: ALSA v: k6.18.49-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: JACK v: 1.9.22 status: off tools: N/A
  Server-3: PipeWire v: 1.6.9 status: off with: pipewire-media-session
    status: off tools: pw-cat,pw-cli
  Server-4: PulseAudio v: 17.0-98-gb096 status: active with: pulseaudio-alsa
    type: plugin tools: pacat,pactl,pavucontrol
Network:
  Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel bus-ID: 0000:00:14.3
    chip-ID: 8086:a0f0 class-ID: 0280
  IF: wlp0s20f3 state: down mac: <filter>
  Device-2: ASIX AX88179 Gigabit Ethernet driver: cdc_ncm type: USB rev: 3.2
    speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-1:73 chip-ID: 0b95:1790
    class-ID: 0a00 serial: <filter>
  IF: enp0s13f0u1c2 state: up speed: 100 Mbps duplex: unknown mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:6 chip-ID: 8087:0026
    class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
    v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:9a0b rev: class-ID: 0104
Drives:
  Local Storage: total: 476.94 GiB used: 96.21 GiB (20.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: MZVL2512HCJQ-00BT7 size: 476.94 GiB block-size: physical: 512 B
    logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: GXA7302Q temp: 25.9 C scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 220.17 GiB size: 215.65 GiB (97.95%)
    used: 96.21 GiB (44.6%) fs: ext4 dev: /dev/nvme0n1p6 maj-min: 259:6
    label: N/A uuid: d540af20-98bf-4853-84e1-5bce691c998d
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 344 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p5 maj-min: 259:5
    label: NO_LABEL uuid: 375E-CC05
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 100 MiB fs: vfat label: ESP
    uuid: 44A6-6A0A
  ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 255.37 GiB fs: ntfs label: Acer
    uuid: EE4AA6FE4AA6C327
  ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 1024 MiB fs: ntfs
    label: Recovery uuid: 782CA7A32CA75B40
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:73 info: ASIX AX88179 Gigabit Ethernet
    type: communication,CDC-data driver: cdc_ncm interfaces: 2 rev: 3.2
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 184mA
    chip-ID: 0b95:1790 class-ID: 0a00 serial: <filter>
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-1:15 info: AOKEO LCS_USB_Audio type: audio
    driver: snd-usb-audio interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 2e3c:4444 class-ID: 0102
    serial: <filter>
  Device-2: 3-3:3 info: Areson Corp 2.4G Wireless Receiver
    type: keyboard,mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 25a7:fa10 class-ID: 0301
  Device-3: 3-5:4 info: Chicony HD User Facing type: video driver: uvcvideo
    interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
    power: 500mA chip-ID: 04f2:b6dd class-ID: 0e02 serial: <filter>
  Device-4: 3-7:5 info: LighTuning EgisTec EH575 type: <vendor specific>
    driver: N/A interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 1c7a:0575 class-ID: ff00 serial: <filter>
  Device-5: 3-10:6 info: Intel AX201 Bluetooth type: bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 100mA chip-ID: 8087:0026 class-ID: e001
  Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 33.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: 2007 pm: pacman pkgs: 1981 libs: 457 tools: octopi,pamac,yay
    pm: flatpak pkgs: 11 pm: snap pkgs: 15
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://mirror.dkm.cz/manjaro/stable/$repo/$arch
    2: https://manjaro.mirror.wearetriple.com/stable/$repo/$arch
    3: https://ftp.halifax.rwth-aachen.de/manjaro/stable/$repo/$arch
    4: https://www.mirrorservice.org/sites/repo.manjaro.org/repos/stable/$repo/$arch
    5: https://manjaro.ipacct.com/manjaro/stable/$repo/$arch
    6: https://manjaro.mirror.garr.it/manjaro/stable/$repo/$arch
    7: https://ftpmirror1.infania.net/mirror/manjaro/stable/$repo/$arch
    8: https://ba.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
Processes:
  CPU top: 5 of 263
  1: cpu: 19.0% command: konsole pid: 523683 mem: 110.7 MiB (0.7%)
  2: cpu: 5.3% command: firefox pid: 511502 mem: 621.4 MiB (3.9%)
  3: cpu: 3.7% command: firefox pid: 511715 mem: 877.2 MiB (5.5%)
  4: cpu: 3.7% command: firefox pid: 515028 mem: 506.0 MiB (3.2%)
  5: cpu: 3.2% command: signal-desktop pid: 514594 mem: 345.3 MiB (2.1%)
  Memory top: 5 of 263
  1: mem: 877.2 MiB (5.5%) command: firefox pid: 511715 cpu: 3.7%
  2: mem: 621.4 MiB (3.9%) command: firefox pid: 511502 cpu: 5.3%
  3: mem: 611.0 MiB (3.8%) command: baloo_file pid: 1324 cpu: 0.0%
  4: mem: 507.8 MiB (3.2%) command: plasmashell pid: 1374 cpu: 0.1%
  5: mem: 506.0 MiB (3.2%) command: firefox pid: 515028 cpu: 3.7%
Info:
  Processes: 263 Power: uptime: 28d 18h 4m states: freeze,mem,disk
    suspend: s2idle avail: deep wakeups: 128 hibernate: platform avail: shutdown,
    reboot, suspend, test_resume image: 6.11 GiB
    services: org_kde_powerdevil,upowerd Init: systemd v: 261
    default: graphical tool: systemctl
  Compilers: clang: 23.1.1 gcc: 16.2.1 Shell: Bash v: 5.3.20
    running-in: konsole inxi: 3.3.41

Mission accomplished, and the success of which is dedicated to you, guys.

BTW, now the boot menu has soooo many entries.

Checked mine- already set to true. I should get used to seeing this list of entries by now?

You have to sudo update-grub after changing it.

They are still present, even though the

GRUB_DISABLE_BOOTNEXT=true
GRUB_BOOTNEXT_OMIT_INACTIVE=true

Then the grub you are updating is not the grub you are booting through. :face_with_raised_eyebrow:

they are to be found in my

grub.pacnew

.
they are not present in

grub

.