Scared to reboot - HOOKS migration required?

Then you have not merged your .pacnew.

The idea is that you would merge the files. Do not blindly copy the .pacnew over the existing configuration file, but also do not ignore the .pacnew — it exists for a reason, i.e. that new options and/or new defaults were introduced by upstream.

In this particular case, the .pacnew introduces new options, which allow you to disable the new behavior — the new behavior being that it adds all of your EFI boot manager entries to the grub menu by default.

After merging the changes from the .pacnew into your existing /etc/default/grub, run… :backhand_index_pointing_down:

sudo update-grub

I have never done it before - hence my insecurity.

sudo pacdiff

==> pacnew file found for /etc/cups/cupsd.conf

choose: S for Skip, then continue until GRUB comes up?

choose: M

You shouldn’t need sudo to run pacdiff -o, which should list all your .pacnews. I normally use meld for examining and merging.

I’d open both the original file and its pacnew in meld, then compare & merge where needed and save the resulting merged file. :wink:

I’ll just add an important observation here, about pacnew handling…

If you encounter a .pacnew file, open it in Meld (or, however you may have it set up) – and you have no clue what to merge or what to keep – this is a prime time to learn.

That there is a .pacnew file often does not demand that you do something with it right now – one can leave it unattended for a few hours, if need be, while researching what the configuration file does, what needs to be changed, merged or kept as-is.

If you frame it that way to yourself, it becomes an excellent learning opportunity.

Good starting point is the user manual

You can leave pacnews even for weeks, so asking here should not be a problem. Just don’t leave them for years.

You are all right about the way it should be handled. Learning, oh boy, I should have had enough of that, or perhaps have only begun to do so.

I need now to copy:

# Disable generating menu entries for other EFI boot manager entries detected
GRUB_DISABLE_BOOTNEXT=true

# Skip EFI boot manager entries that are marked inactive
# when when generating bootnext entries
GRUB_BOOTNEXT_OMIT_INACTIVE=true

exacty like above under

#GRUB_ROOT_FS_RO=true

And that’s what is to be done?

Why don’t I just paste both…

the GRUB:

GRUB_DEFAULT=saved
GRUB_TIMEOUT=2
GRUB_TIMEOUT_STYLE=menu
GRUB_DISTRIBUTOR="Manjaro"
GRUB_CMDLINE_LINUX_DEFAULT="quiet udev.log_priority=3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1"
GRUB_CMDLINE_LINUX=""

# If you want to enable the save default function, uncomment the following
# line, and set GRUB_DEFAULT to saved.
GRUB_SAVEDEFAULT=true

# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command 'videoinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment this option to enable os-prober execution in the grub-mkconfig command
GRUB_DISABLE_OS_PROBER=false

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/usr/share/grub/background.png"
GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to ensure that the root filesystem is mounted read-only so that
# systemd-fsck can run the check automatically. We use 'fsck' by default, which
# needs 'rw' as boot parameter, to avoid delay in boot-time. 'fsck' needs to be
# removed from 'mkinitcpio.conf' to make 'systemd-fsck' work.
# See also Arch-Wiki: https://wiki.archlinux.org/index.php/Fsck#Boot_time_checking
#GRUB_ROOT_FS_RO=true

grub.pacnew:

# GRUB boot loader configuration

GRUB_DEFAULT=saved
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Manjaro"
GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=3 rd.udev.log_level=3"
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Set to 'countdown' or 'menu' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=hidden

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command 'videoinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/usr/share/grub/background.png"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
GRUB_SAVEDEFAULT=true

# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y

# Uncomment this option to enable os-prober execution in the grub-mkconfig command
#GRUB_DISABLE_OS_PROBER=false

# Uncomment to ensure that the root filesystem is mounted read-only so that
# systemd-fsck can run the check automatically. We use 'fsck' by default, which
# needs 'rw' as boot parameter, to avoid delay in boot-time. 'fsck' needs to be
# removed from 'mkinitcpio.conf' to make 'systemd-fsck' work.
# See also Arch-Wiki: https://wiki.archlinux.org/title/Fsck#Boot_time_checking
#GRUB_ROOT_FS_RO=true

# Disable generating menu entries for other EFI boot manager entries detected
GRUB_DISABLE_BOOTNEXT=true

# Skip EFI boot manager entries that are marked inactive
# when when generating bootnext entries
GRUB_BOOTNEXT_OMIT_INACTIVE=true

Bear with me…

Mod edit: Pasted the pastebin output here for easier reference, and because pastebin deletes content after some time. :wink:

The idea is that you merge the new changes into your old config. You should end up with the new config but with your custom configuration still in place (assuming it’s still valid).

Here’s a merged version, please compare the three versions so you can see how to handle it in future.

# GRUB boot loader configuration

GRUB_DEFAULT=saved
GRUB_TIMEOUT=2
GRUB_DISTRIBUTOR="Manjaro"
GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=3 rd.udev.log_level=3 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1"
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Set to 'countdown' or 'menu' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=menu

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command 'videoinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/usr/share/grub/background.png"
GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
GRUB_SAVEDEFAULT=true

# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y

# Uncomment this option to enable os-prober execution in the grub-mkconfig command
GRUB_DISABLE_OS_PROBER=false

# Uncomment to ensure that the root filesystem is mounted read-only so that
# systemd-fsck can run the check automatically. We use 'fsck' by default, which
# needs 'rw' as boot parameter, to avoid delay in boot-time. 'fsck' needs to be
# removed from 'mkinitcpio.conf' to make 'systemd-fsck' work.
# See also Arch-Wiki: https://wiki.archlinux.org/title/Fsck#Boot_time_checking
#GRUB_ROOT_FS_RO=true

# Disable generating menu entries for other EFI boot manager entries detected
GRUB_DISABLE_BOOTNEXT=true

# Skip EFI boot manager entries that are marked inactive
# when when generating bootnext entries
GRUB_BOOTNEXT_OMIT_INACTIVE=true

Sometimes, the officially recommended way to do the things is also the easiest. One doesn’t need to reinvent the wheel.
Install meld. Then

DIFFPROG=meld pacdiff -s

Then hit V and meld will open with colors bells and whistles, and arrows..and then you won’t have to ask where goes what, because it will be positioned automatically. If the pacnew is left, there will be green blocks with an arrow. Click on the arrow and the whole block gets copied in the old file.
After you are ready, click save on the right file, close meld and choose to delete the pacnew, it will ask for the next one.

It becomes even easier if you add

DIFFPROG=/usr/bin/meld

to your file /etc/environment. Then you only need to type

$ pacdiff -s

Homework :wink:
Me personally i did it in .profile and then sourced the profile through .bashrc.

Or diffuse (gtk), or kompare (qt). :wink:

done. you rock guys.

finally - sudo rm /etc/default/grub.pacnew

am I right?

Yes. Unless of course you want to keep it around for future reference. Or for archaeological reasons. Or as inspiration for a sci-fi thriller.

We’re not judgmental, and all that. :stuck_out_tongue:

They’d make nice, geeky wallpaper, if enough were collected.

With some luck and several pieces of info slash commands, I have been saved. Peace

wink wink LOL LOL2

Those are easy. Wait till you get to the Axl Rose commands. Those are a lot more difficult.

:grin: