I have a samba share on an Unraid NAS device running separate from the PC running Manjaro.
Within Manjaro, I can navigate in the Dolphin GUI to the smb share successfully. It shows up under the “Remote” section as expected.
I have security settings on the smb share. You have to log in with a user/pass in order to have read/write access. Otherwise access is read only.
Given this, my access to the share in Manjaro/dolphin is read-only. However, I cannot for the life of me figure out how to connect with my user/pass.
I’ve tried to put my username/password in the URL for the samba share, by right clicking, going to “Edit” and updating the “Location” field in Dolphin to add my user/pass to the samba URL. Doesn’t do anything.
Haven’t been able to find anything under system settings. I checked the ArchWiki, but the samba guides seems to be based around how to set up samba on Manjaro, not how to log into a remote samba share with KDE Plasma.
Anyway, I would appreciate any help! This one has thrown me a for a loop.
1 Like
Hi Fabby! Ty so much here’s the information below. I will post the inxi system output, follow by the smbclient.
System:
Kernel: 5.10.34-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=1cbcf1c0-ca88-4f96-a451-7bf5a4213134 rw quiet apparmor=1
security=apparmor resume=UUID=2478544d-3812-4597-866d-e7e8dafb4ea8
udev.log_priority=3
Desktop: KDE Plasma 5.21.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <filter>
Mobo: ASUSTeK model: ROG CROSSHAIR VIII IMPACT v: Rev X.0x serial: <filter>
UEFI: American Megatrends v: 3402 date: 03/22/2021
Battery:
ID-1: hidpp_battery_0 charge: N/A condition: N/A volts: 4.1 min: N/A
model: Logitech G903 LIGHTSPEED Wireless Gaming Mouse w/ HERO type: N/A
serial: <filter> status: Discharging
Memory:
RAM: total: 62.79 GiB used: 8.46 GiB (13.5%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 16-Core model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3
family: 19 (25) model-id: 21 (33) stepping: 0 microcode: A201009 cache:
L2: 8 MiB bogomips: 217193
Speed: 3883 MHz min/max: 2200/3400 MHz boost: enabled Core speeds (MHz):
1: 3883 2: 3853 3: 2196 4: 2194 5: 2196 6: 2195 7: 2196 8: 2196 9: 3909
10: 3852 11: 3852 12: 3852 13: 3851 14: 4290 15: 3852 16: 3886 17: 4816
18: 2196 19: 2196 20: 2196 21: 2196 22: 2196 23: 2196 24: 3852 25: 2195
26: 2196 27: 3970 28: 3852 29: 3852 30: 4816 31: 2195 32: 2194
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc
cr8_legacy cx16 cx8 de decodeassists erms extapic extd_apicid f16c
flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs
invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor
movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw
overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core
perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt pse pse36 rdpid rdpru
rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd
sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce
topoext tsc tsc_scale umip v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall
vpclmulqdq wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA104 [GeForce RTX 3070] vendor: ASUSTeK driver: nvidia
v: 460.73.01 alternate: nouveau,nvidia_drm bus-ID: 0a:00.0
chip-ID: 10de:2484 class-ID: 0300
Device-2: Logitech C922 Pro Stream Webcam type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 5-2.4:6 chip-ID: 046d:085c
class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver:
loaded: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 3440x1440 s-dpi: 109 s-size: 802x342mm (31.6x13.5")
s-diag: 872mm (34.3")
Monitor-1: DP-2 res: 3440x1440 hz: 60 dpi: 109 size: 798x335mm (31.4x13.2")
diag: 865mm (34.1")
OpenGL: renderer: GeForce RTX 3070/PCIe/SSE2 v: 4.6.0 NVIDIA 460.73.01
direct render: Yes
Audio:
Device-1: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 0a:00.1 chip-ID: 10de:228b class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 0c:00.4 chip-ID: 1022:1487
class-ID: 0403
Device-3: Logitech C922 Pro Stream Webcam type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 5-2.4:6 chip-ID: 046d:085c
class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.10.34-1-MANJARO running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: yes
Sound Server-4: PipeWire v: 0.3.26 running: yes
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus-ID: 05:00.0
chip-ID: 8086:2723 class-ID: 0280
IF: wlp5s0 state: down mac: <filter>
Device-2: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
port: f000 bus-ID: 06:00.0 chip-ID: 8086:1539 class-ID: 0200
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-5:3
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 3.68 TiB used: 292.11 GiB (7.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:4 vendor: Samsung model: SSD 980 PRO 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 rotation: SSD serial: <filter> rev: 2B2QGXA7 temp: 32.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Sabrent model: N/A size: 1.86 TiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4
rotation: SSD serial: <filter> rev: RKT303.4 temp: 28.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 1.75 TiB size: 1.72 TiB (98.37%) used: 31.36 GiB (1.8%)
fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:6 label: N/A
uuid: 1cbcf1c0-ca88-4f96-a451-7bf5a4213134
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 296 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:5
label: NO_LABEL uuid: B1B8-4450
ID-3: /run/media/jake/732fc271-7e1f-455e-9866-e2591b0fb06a
raw-size: 1.85 TiB size: 1.82 TiB (98.37%) used: 260.76 GiB (14.0%) fs: ext4
dev: /dev/nvme1n1p2 maj-min: 259:2 label: N/A
uuid: 732fc271-7e1f-455e-9866-e2591b0fb06a
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 69.06 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:7 label: N/A
uuid: 2478544d-3812-4597-866d-e7e8dafb4ea8
Unmounted:
ID-1: /dev/nvme1n1p1 maj-min: 259:1 size: 300 MiB fs: vfat label: NO_LABEL
uuid: E9E4-1233
ID-2: /dev/nvme1n1p3 maj-min: 259:3 size: 17.15 GiB fs: swap label: N/A
uuid: 7a48a784-0f3b-4f4b-9b05-a5eb87de4209
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-3:2 info: NZXT USB Device type: HID driver: hid-generic,usbhid
interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 1e71:2007
class-ID: 0300 serial: <filter>
Device-2: 1-5:3 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Device-3: 1-6:4 info: ASUSTek AURA LED Controller type: HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA
chip-ID: 0b05:18f3 class-ID: 0300 serial: <filter>
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-6: 5-2:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 1a40:0101 class-ID: 0900
Device-1: 5-2.1:3 info: ZSA Labs ErgoDox EZ Glow type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s
power: 500mA chip-ID: 3297:4976 class-ID: 0300
Device-2: 5-2.2:4 info: Logitech USB Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
power: 98mA chip-ID: 046d:c539 class-ID: 0300
Device-3: 5-2.3:5 info: Logitech PowerPlay Wireless Charging System
type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
rev: 2.0 speed: 12 Mb/s power: 498mA chip-ID: 046d:c53a class-ID: 0300
Device-4: 5-2.4:6 info: Logitech C922 Pro Stream Webcam type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 500mA chip-ID: 046d:085c class-ID: 0102 serial: <filter>
Hub-7: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 62.1 C mobo: 0 C gpu: nvidia temp: 74 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 91%
Info:
Processes: 495 Uptime: 1h 20m wakeups: 3 Init: systemd v: 247
tool: systemctl Compilers: gcc: 10.2.0 Packages: pacman: 1221 lib: 345
flatpak: 0 Shell: Bash v: 5.1.4 running-in: konsole inxi: 3.3.04
smbclient: Can't load /etc/samba/smb.conf - run testparm to debug it
Anonymous login successful
Sharename Type Comment
--------- ---- -------
appdata Disk application data
backups Disk random things i need to save
cloud_backups Disk important docs. backup to g-drive. don't exceed 10GB
media Disk root directory for all media
misc Disk other things that don't go anywhere else
music Disk high quality audio files and backups
music_production Disk assets for music making
photos Disk
IPC$ IPC IPC Service (Media server)
SMB1 disabled -- no workgroup available
You never configured the Samba client and a while ago SMB1 got disabled because of some serious security issues.
So create a config file and add to the [global]
section client min protocol = NT1
if and only if you cannot upgrade your NAS to SMB2 .
OR
Upgrade your NAS ASAP and if it would be advertising its shares to the Internet turn that off right now before you do anything else!!! ¹
After the upgrade, set your NAS to use SMB2 or better: SMB3!
Note 1: Yup, even if you have passwords set because that’s the issue: passwords can be circumvented!
Ty so much Fabby! Investigating this now w/ my NAS OS.
1 Like
Fix:
Turns out you don’t connect to your SMB share in Dolphin - you have to configure it via Manjaro’s system configuration.
Go to System Settings → Network → Settings → Windows Shares, and enter your Username/PS.
This solved my issue. I do admit, if you have multiple SMB shares with different credentials I don’t know what you’d do. But assuming you have one, the above works.
2 Likes
system
Closed
24 September 2021 14:52
7
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.