Problems with suspend and resume

After the update I am experiencing problems with suspend and resume.
Operating System: Manjaro Linux
KDE Plasma Version: 5.24.5
KDE Frameworks Version: 5.93.0
Qt Version: 5.15.3
Kernel Version: 5.15.38-1-MANJARO (64-bit)
Graphics Platform: X11
Processors: 8 × Intel® Core™ i7-6820HQ CPU @ 2.70GHz
Memory: 31.3 GiB of RAM
Graphics Processor: Quadro M1000M/PCIe/SSE2

I also have the problem that the system often freezes when using Firefox.
I would say this is the most problematic update since I have been using this distro

Can confirm this bug, I switched to the stable Kernel 5.17.6 which does not have this issue.

Otherwise you can also try 5.15.39
But this kernel is not an option for me, because it does not have the vmmon kernel module.

My Sys Info:

System:
  Kernel: 5.17.6-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-5.17-x86_64
    root=UUID=2858d787-58d2-4b32-bfe2-dcd848223859 rw rootflags=subvol=@
    cryptdevice=UUID=ec00de08-393b-4d8c-a1ed-853a4de311ee:cryptroot apparmor=1
    security=apparmor bootsplash.bootfile=bootsplash-themes/manjaro/bootsplash
  Desktop: Xfce v: 4.16.0 tk: Gtk v: 3.24.29 info: xfce4-panel wm: xfwm
    v: 4.16.1 vt: 7 dm: LightDM v: 1.30.0 Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 4204
    date: 02/24/2022
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 31.32 GiB used: 5.92 GiB (18.9%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD Ryzen 9 3900X bits: 64 type: MT MCP arch: Zen 2
    family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701021
  Topology: cpus: 1x cores: 12 tpc: 2 threads: 24 smt: enabled cache:
    L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 6 MiB desc: 12x512 KiB
    L3: 64 MiB desc: 4x16 MiB
  Speed (MHz): avg: 3991 high: 3993 min/max: 2200/4918 boost: disabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 3992 2: 3992
    3: 3992 4: 3992 5: 3992 6: 3991 7: 3992 8: 3991 9: 3992 10: 3989 11: 3992
    12: 3992 13: 3991 14: 3992 15: 3991 16: 3992 17: 3992 18: 3991 19: 3992
    20: 3992 21: 3992 22: 3993 23: 3992 24: 3991 bogomips: 191729
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
    f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
    irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
    msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
    pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
    pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
    rdtscp rep_good sep sev sev_es sha_ni skinit smap smca sme smep ssbd sse
    sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce
    topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme
    vmmcall wbnoinvd wdt x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt
    xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Retpolines, IBPB: conditional, STIBP: conditional, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT]
    vendor: ASUSTeK driver: amdgpu v: kernel pcie: gen: 4 speed: 16 GT/s
    lanes: 16 ports: active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 0b:00.0
    chip-ID: 1002:731f class-ID: 0300
  Device-2: Logitech C922 Pro Stream Webcam type: USB
    driver: snd-usb-audio,uvcvideo bus-ID: 1-1:2 chip-ID: 046d:085c
    class-ID: 0102 serial: <filter>
  Display: x11 server: X.Org v: 21.1.3 compositor: xfwm v: 4.16.1 driver: X:
    loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa
    gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: Samsung SyncMaster
    serial: <filter> built: 2009 res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2
    size: 477x268mm (18.78x10.55") diag: 587mm (23.1") ratio: 16:9, 15:9
    modes: max: 1920x1080 min: 640x480
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab38
    class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0d:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-3: Logitech C922 Pro Stream Webcam type: USB
    driver: snd-usb-audio,uvcvideo bus-ID: 1-1:2 chip-ID: 046d:085c
    class-ID: 0102 serial: <filter>
  Device-4: Logitech [G533 Wireless Headset Dongle] type: USB
    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-1:5 chip-ID: 046d:0a66
    class-ID: 0300
  Device-5: C-Media Auna Mic CM900 type: USB
    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-2:3 chip-ID: 0d8c:0134
    class-ID: 0300
  Sound Server-1: ALSA v: k5.17.6-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.21 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.51 running: yes
Network:
  Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 05:00.0
    chip-ID: 8086:1539 class-ID: 0200
  IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  IF-ID-1: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  IF-ID-2: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
    driver: btusb v: 0.8 bus-ID: 1-2:3 chip-ID: 0a12:0001 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: see --recommends
Logical:
  Message: No logical block device data found.
  Device-1: cryptroot maj-min: 254:0 type: LUKS dm: dm-0 size: 419.26 GiB
  Components:
  p-1: nvme0n1p2 maj-min: 259:3 size: 419.26 GiB
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.82 TiB used: 254.71 GiB (13.7%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 500GB
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: 2B2QEXE7 temp: 50.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung model: SSD 970 EVO 500GB
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: 2B2QEXE7 temp: 27.9 C scheme: GPT
  ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 QVO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 2B6Q scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 419.26 GiB size: 419.26 GiB (100.00%)
    used: 28.98 GiB (6.9%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: cryptroot label: N/A uuid: N/A
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
    used: 26.1 MiB (5.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:2 label: N/A
    uuid: C380-DE14
  ID-3: /home raw-size: 419.26 GiB size: 419.26 GiB (100.00%)
    used: 28.98 GiB (6.9%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: cryptroot label: N/A uuid: N/A
  ID-4: /run/media/pheiduck/Daten raw-size: 931.51 GiB
    size: 931.51 GiB (100.00%) used: 225.71 GiB (24.2%) fs: btrfs dev: /dev/sda1
    maj-min: 8:1 label: N/A uuid: 3704c1e0-6710-4592-8b0b-28322fd45bbd
  ID-5: /run/timeshift/backup raw-size: 419.26 GiB
    size: 419.26 GiB (100.00%) used: 28.98 GiB (6.9%) fs: btrfs dev: /dev/dm-0
    maj-min: 254:0 mapped: cryptroot label: N/A uuid: N/A
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 15.66 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Unmounted:
  ID-1: /dev/nvme1n1p1 maj-min: 259:4 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-2: /dev/nvme1n1p2 maj-min: 259:5 size: 418.61 GiB fs: ntfs
    label: Windoof uuid: 1E16606116603C41
  ID-3: /dev/nvme1n1p3 maj-min: 259:6 size: 565 MiB fs: ntfs label: N/A
    uuid: 30086A240869E974
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-1:2 info: Logitech C922 Pro Stream Webcam type: Video,Audio
    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
    power: 500mA chip-ID: 046d:085c class-ID: 0102 serial: <filter>
  Device-2: 1-2:3 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
    type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 100mA chip-ID: 0a12:0001 class-ID: e001
  Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-1:5 info: Logitech [G533 Wireless Headset Dongle]
    type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 4
    rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 046d:0a66 class-ID: 0300
  Device-2: 3-2:3 info: C-Media Auna Mic CM900 type: Audio,HID
    driver: hid-generic,snd-usb-audio,usbhid interfaces: 3 rev: 1.1
    speed: 12 Mb/s power: 100mA chip-ID: 0d8c:0134 class-ID: 0300
  Device-3: 3-4:4 info: ASUSTek AURA LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA
    chip-ID: 0b05:18f3 class-ID: 0300 serial: <filter>
  Hub-4: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-5: 5-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-6: 5-3:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0608 class-ID: 0900
  Device-1: 5-3.2:4 info: Metadot Das Keyboard 4 type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s
    power: 100mA chip-ID: 24f0:204a class-ID: 0300
  Device-2: 5-4:3 info: Logitech Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
    power: 98mA chip-ID: 046d:c045 class-ID: 0301
  Hub-7: 6-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 42.0 C mobo: 46.0 C gpu: amdgpu temp: 58.0 C
    mem: 54.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Info:
  Processes: 530 Uptime: 2h 3m wakeups: 1 Init: systemd v: 250 tool: systemctl
  Compilers: gcc: 11.2.0 clang: 13.0.1 Packages: 1212 pacman: 1203 lib: 343
  flatpak: 9 Shell: Zsh v: 5.8.1 running-in: xfce4-terminal inxi: 3.3.15

Thanks. I will try to upgrade to kernel 5.17.6

As for Firefox, it seems that the problem is solved by completely clearing the cache.
In any case, I have noticed an “RDD process” which, from time to time, takes up a considerable amount of the CPU

Unfortunately this was not conclusive.
I had to turn off the “lock screen automatically” feature again.
I also activated the option “Never turn off the screen or let it go to sleep”