Problem mounting ntfs partition drive

I recently moved to manjaro . i installed manjaro on my ssd and i have 3 ntfs partition in my hdd. At first i couldn’t write to my drives but only in my ssd. Then i followed some links to fix this using kde partition manager. I think i made some mistakes while using partition manager. Now i can mount one of my partition only if i click the other two the following error shows

“An error occurred while accessing ‘Home’, the system responded: The requested operation has failed: Error mounting system-managed device /dev/sdb4: Unknown error when mounting /run/media/”

System:
  Kernel: 5.15.28-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
    root=UUID=b77508cd-8214-4bf8-a420-6b33a303e82f rw quiet apparmor=1
    security=apparmor udev.log_priority=3
  Desktop: KDE Plasma v: 5.24.3 tk: Qt v: 5.15.3 wm: kwin_wayland vt: 2
    dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X509DJ_D509DJ
    v: 1.0 serial: <superuser required>
  Mobo: ASUSTeK model: X509DJ v: 1.0 serial: <superuser required>
    UEFI: American Megatrends v: X509DJ.307 date: 10/08/2021
Battery:
  ID-1: BAT0 charge: 23.9 Wh (95.2%) condition: 25.1/32.1 Wh (78.1%)
    volts: 7.8 min: 7.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
    status: charging cycles: 205
Memory:
  RAM: total: 5.8 GiB used: 1.73 GiB (29.8%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx bits: 64
    type: MT MCP arch: Zen/Zen+ note: check family: 0x17 (23)
    model-id: 0x18 (24) stepping: 1 microcode: 0x8108109
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
    desc: 1x4 MiB
  Speed (MHz): avg: 1462 high: 1942 min/max: 1400/2100 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1942 2: 1293
    3: 1226 4: 1225 5: 1427 6: 1408 7: 1426 8: 1756 bogomips: 33550
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb cpuid
    cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid
    fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf lahf_lm lbrv lm
    mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc
    nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq
    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse
    pse36 rapl rdrand rdseed rdtscp rep_good sep sev sev_es sha_ni skinit smap
    smca sme smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 succor svm svm_lock
    syscall tce topoext tsc tsc_scale v_vmsave_vmload vgif vmcb_clean vme
    vmmcall wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GP108M [GeForce MX230] vendor: ASUSTeK driver: nouveau
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 4 link-max: gen: 3
    speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 10de:1d11 class-ID: 0302
  Device-2: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series]
    vendor: ASUSTeK driver: amdgpu v: kernel pcie: gen: 3 speed: 8 GT/s
    lanes: 16 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0
    chip-ID: 1002:15d8 class-ID: 0300
  Device-3: IMC Networks USB2.0 VGA UVC WebCam type: USB driver: uvcvideo
    bus-ID: 3-2.2:5 chip-ID: 13d3:5a11 class-ID: 0e02
  Display: wayland server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.0
    compositor: kwin_wayland driver: X: loaded: amdgpu,modesetting
    alternate: fbdev,vesa gpu: nouveau,amdgpu display-ID: 0
  Monitor-1: eDP-1 res: 1920x1080 size: N/A modes: N/A
  OpenGL: renderer: AMD Radeon Vega 8 Graphics (RAVEN DRM 3.42.0
    5.15.28-1-MANJARO LLVM 13.0.1)
    v: 4.6 Mesa 21.3.7 direct render: Yes
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 03:00.1
    chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor driver: snd_pci_acp3x
    v: kernel alternate: snd_rn_pci_acp3x,snd_pci_acp5x pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h/19h HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound Server-1: ALSA v: k5.15.28-1-MANJARO running: yes
  Sound Server-2: sndio v: N/A running: no
  Sound Server-3: JACK v: 1.9.20 running: no
  Sound Server-4: PulseAudio v: 15.0 running: yes
  Sound Server-5: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter
    vendor: AzureWave driver: rtl8821ce v: N/A modules: rtw88_8821ce,8821ce
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 02:00.0
    chip-ID: 10ec:c821 class-ID: 0280
  IF: wlp2s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: IMC Networks Bluetooth Radio type: USB driver: btusb v: 0.8
    bus-ID: 3-2.1:4 chip-ID: 13d3:3529 class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.03 TiB used: 43.87 GiB (4.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: PNY model: CS2040 128GB SSD
    size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: BB.3 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000LM035-1RK172
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    type: HDD rpm: 5400 serial: <filter> rev: 0001 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.95 GiB size: 116.52 GiB (97.96%)
    used: 17.81 GiB (15.3%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
    uuid: b77508cd-8214-4bf8-a420-6b33a303e82f
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 288 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: NO_LABEL
    uuid: C32C-1BF8
  ID-3: /run/media raw-size: 310.46 GiB size: 310.46 GiB (100.00%)
    used: 26.05 GiB (8.4%) fs: ntfs dev: /dev/sdb2 maj-min: 8:18
    label: New_Volume1 uuid: 7C281C6D281C28A2
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sdb1 maj-min: 8:17 size: 128 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-2: /dev/sdb3 maj-min: 8:19 size: 310.52 GiB fs: ntfs label: new_volume3
    uuid: 6DCDC3472A0485CE
  ID-3: /dev/sdb4 maj-min: 8:20 size: 310.4 GiB fs: ntfs label: New_Volume2
    uuid: 72B42BE8B42BAD93
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-3:2 info: A4Tech USB Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
    power: 100mA chip-ID: 09da:c10a class-ID: 0301
  Device-2: 1-4:3 info: Logitech Keyboard K120 type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s
    power: 90mA chip-ID: 046d:c31c class-ID: 0300
  Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-1:2 info: Realtek RTS5129 Card Reader Controller
    type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
    interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129
    class-ID: ff00 serial: <filter>
  Hub-4: 3-2:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    power: 100mA chip-ID: 05e3:0608 class-ID: 0900
  Device-1: 3-2.1:4 info: IMC Networks Bluetooth Radio type: Bluetooth
    driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 500mA
    chip-ID: 13d3:3529 class-ID: e001 serial: <filter>
  Device-2: 3-2.2:5 info: IMC Networks USB2.0 VGA UVC WebCam type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 13d3:5a11 class-ID: 0e02
  Hub-5: 4-0:1 info: Super-speed hub ports: 1 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 59.0 C mobo: N/A
  Fan Speeds (RPM): cpu: 1700
  GPU: device: nouveau temp: 45.0 C device: amdgpu temp: 58.0 C
Info:
  Processes: 258 Uptime: 28m wakeups: 1 Init: systemd v: 250 tool: systemctl
  Compilers: gcc: 11.2.0 clang: 13.0.1 Packages: pacman: 1303 lib: 363
  flatpak: 0 Shell: Zsh v: 5.8.1 default: Bash v: 5.1.16 running-in: konsole
  inxi: 3.3.14

As i am new . it will be pretty helpful if someone helps me solve this

Then post /etc/fstab.

/etc/fstab                                                                                       127 ✘ 
zsh: permission denied: /etc/fstab

sudo or root -> /etc/fstab

i tried to run the command. but don,t know if i could do so properly.

sudo /etc/fstab                                                                                      ✔ 
[sudo] password for alamin: 
sudo: /etc/fstab: command not found

again i tried to search manually the /etc/fstab. Couldn’t find one.
fstab
I think my problem has to something with the mount point because when i changed something mount point of hdd became none. the i didn’t know what to do. Then changed all of them to /run/media


ssd

  GNU nano 6.2                                         /etc/fstab                                                   
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=C32C-1BF8                              /boot/efi     vfat   umask=0077   0 2
UUID=b77508cd-8214-4bf8-a420-6b33a303e82f   /             ext4   noatime      0 1

/dev/sdb2                                   /run/media/   ntfs   defaults     0 0
/dev/sdb3                                   /run/media/   ntfs   defaults     0 0
/dev/sdb4                                   /run/media/   ntfs   defaults     0 0

You cannot mount all of those partitions on the same mountpoint. Or that is to say, you can, but then only the last mounted partition’s content will be shown, and the other two’s content will be obscured.

Use different mountpoints. And don’t use ntfs as the filesystem type, because that driver does not support writing. Use ntfs-3g instead.

Lastly, the choice of defaults as a mount option for NTFS is not a good one. See the following tutorials… :arrow_down:

1 Like

can i use any other two folder in /run folder other than /media for my other two additional drives?

First of all, /run/media exists in virtual memory, so it’s not an ideal place to mount those volumes, because those “folders” are not persistent — see my tutorials for recommendations. Secondly, you can create different “folders” for each of those volumes — again, see my tutorial.

1 Like

ensure you have shutdown windows clean - no hibernation - no fast startup

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.