sorry my mistake I have just checked my notebook
Please post the output of
cat /etc/modprobe.d/mhwd-gpu.conf
cat /etc/modprobe.d/supergfxd.conf
cat /etc/modules-load.d/mhwd-gpu.conf
Hi, I have made some “progress”.
I tried to go back to the previous kernel 6.8-MANJARO, and I reinstalled the video driver trough mhwd -a. However, that caused me to boot into a black screen that allowed to use TTY and check that, yes indeed, DRIVERS WERE INSTALLED! Meaning that inxi showed drivers: nvidia and I could run nvidia-smi.
Unfortunately, while trying to get video output (startplasma, startx and sddm.service were giriving me errors) I ended up making the problem worse: at this point I get a black screen at startup and I can’t even get into TTY on all these kernels: 6.9-MANJARO and 6.8-MANJARO.
So now I can only boot TTY from the g14 kernel, where I habe begun the whole journey, and where inxi says driver: N/A and nvidia-smi is not working.
As for your commands (sorry I cant copypaste from tty)
mhwd-gpu.conf is:
blacklist nouveau,
blacklist ttm
blacklist drm_kms_helper
blacklist drm
supergfxd.conf is:
blacklist nouveau
alias nouveau off
options nvidia-drm modeset=1
The /etc/modules-load.d/mhwd-gpu.conf is:
nvidia
nvidia-drm
EDIT: the output of systemctl status sddm.service says Failed to read display number from pipe
I have regained graphics on g14 by running nvidia-xconfig and then startx.
Then, i loaded 6.8-MANJARO (where I previously could read the drivers as installed), and surprisingly I was able to get into tty (pheraps because I ran nvidia-xconfig from the g14 kernel?). So I ran nvidia-xconfig in the 6.8-MANJARO, then I ran startx and it hanged at “loading cofig files”. So, I rebooted and loaded into 6.8-MANJARO, getting again the black screen without tyy.
Then, I rebooted into g14 and I could only get tty again.
In summary, in g14 i can get graphics but not the nvidia drivers, in 6.8-MANJARO i can get only tty but with nvidia drivers working.
On a side note: my pc is now taking forever to shutdown, and I have been forcing it shut from the power button as Ive waited for over 5 minutes once.
nvidia
nvidia-drm
n not N
Sorry, the names were all lowrcase in the computer’s files. My phone added the uppercase when writing in the forum.
curios
please view the output
journalctl -b | grep nvidia
you can test
startplasma-x11
from Terminal to start kde
journalctl -b | grep nvidia ✔
mag 27 23:13:26 davide-manjaro systemd-modules-load[420]: Failed to find module 'nvidia'
mag 27 23:13:26 davide-manjaro systemd-modules-load[420]: Failed to find module 'nvidia-drm'
mag 27 23:13:26 davide-manjaro systemd-modules-load[420]: Failed to find module 'nvidia-uvm'
mag 27 23:13:26 davide-manjaro systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:nvidia_wmi_ec_backlight...
mag 27 23:13:26 davide-manjaro systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:nvidia_wmi_ec_backlight.
mag 27 23:13:27 davide-manjaro supergfxd[694]: ERROR: Action thread errored: The module nvidia_drm is missing
mag 27 23:13:27 davide-manjaro systemd[1]: Started nvidia-powerd service.
mag 27 23:13:27 davide-manjaro supergfxd[694]: DEBUG: Did CommandArgs { inner: ["start", "nvidia-powerd.service"] }
mag 27 23:13:27 davide-manjaro /usr/bin/nvidia-powerd[828]: nvidia-powerd version:1.0(build 1)
mag 27 23:13:27 davide-manjaro /usr/bin/nvidia-powerd[828]: Allocate client failed 89
mag 27 23:13:27 davide-manjaro /usr/bin/nvidia-powerd[828]: Failed to initialize RM Client
mag 27 23:13:27 davide-manjaro systemd[1]: nvidia-powerd.service: Main process exited, code=exited, status=1/FAILURE
mag 27 23:13:27 davide-manjaro systemd[1]: nvidia-powerd.service: Failed with result 'exit-code'.
This was after booting into g14, where i just got the graphics without having to go through TTY. Here are some more outputs from this same instance:
mhwd -li -l ✔
> Installed PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
video-linux 2024.05.06 true PCI
video-hybrid-intel-nvidia-prime 2023.03.23 false PCI
Warning: No installed USB configs!
> 0000:37:00.0 (0200:10ec:8168) Network controller Realtek Semiconductor Co., Ltd.:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
network-r8168 2023.09.12 true PCI
> 0000:01:00.0 (0300:10de:28e0) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-prime 2023.03.23 false PCI
video-nvidia 2024.05.03 false PCI
video-linux 2024.05.06 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
> 0000:00:02.0 (0300:8086:4626) Display controller Intel Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-prime 2023.03.23 false PCI
video-linux 2024.05.06 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
inxi -Fx ✔
System:
Host: davide-manjaro Kernel: 6.9.0-arch1-1.2-g14 arch: x86_64 bits: 64
compiler: gcc v: 14.1.1
Desktop: KDE Plasma v: 6.0.4 Distro: Manjaro base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: ASUS TUF Gaming F15 FX507ZV4_FX507ZV4
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: FX507ZV4 v: 1.0 serial: <superuser required>
UEFI: American Megatrends LLC. v: FX507ZV4.327 date: 02/29/2024
Battery:
ID-1: BAT0 charge: 78.2 Wh (98.0%) condition: 79.8/90.0 Wh (88.7%)
volts: 17.0 min: 15.9 model: AS3GWYF3KC GA50358 status: not charging
CPU:
Info: 14-core (6-mt/8-st) model: 12th Gen Intel Core i7-12700H bits: 64
type: MST AMCP arch: Alder Lake rev: 3 cache: L1: 1.2 MiB L2: 11.5 MiB
L3: 24 MiB
Speed (MHz): avg: 647 high: 1993 min/max: 400/4600:4700:3500 cores: 1: 400
2: 400 3: 918 4: 1993 5: 400 6: 1809 7: 603 8: 400 9: 400 10: 400 11: 1625
12: 400 13: 400 14: 400 15: 400 16: 400 17: 400 18: 400 19: 400 20: 400
bogomips: 107560
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel Alder Lake-P Integrated Graphics vendor: ASUSTeK
driver: i915 v: kernel arch: Gen-12.2 bus-ID: 0000:00:02.0
Device-2: NVIDIA AD107M [GeForce RTX 4060 Max-Q / Mobile] vendor: ASUSTeK
driver: N/A arch: Lovelace bus-ID: 0000:01:00.0
Device-3: Sonix USB2.0 HD UVC WebCam driver: uvcvideo type: USB
bus-ID: 3-7:3
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 23.2.6 driver: X:
loaded: modesetting unloaded: vesa dri: iris gpu: i915
resolution: 1920x1080~144Hz
API: EGL v: 1.5 drivers: iris,swrast platforms:
active: x11,surfaceless,device inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.0.6-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel Graphics (ADL GT2)
API: Vulkan v: 1.3.279 drivers: intel surfaces: xcb,xlib devices: 1
Audio:
Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 0000:00:1f.3
Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 0000:01:00.1
API: ALSA v: k6.9.0-arch1-1.2-g14 status: kernel-api
Server-1: JACK v: 1.9.22 status: off
Server-2: PipeWire v: 1.0.5 status: active
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 0000:00:14.3
IF: wlo1 state: up mac: XXXXXX
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel port: 3000 bus-ID: 0000:37:00.0
IF: enp55s0 state: down mac: XXXXXX
Bluetooth:
Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB
bus-ID: 3-10:4
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
RAID:
Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
v: 0.6 bus-ID: 0000:00:0e.0
Drives:
Local Storage: total: 1.38 TiB used: 462.92 GiB (32.9%)
ID-1: /dev/nvme0n1 vendor: Micron model: 2400 MTFDKBA512QFM
size: 476.94 GiB temp: 37.9 C
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 970 EVO Plus 1TB
size: 931.51 GiB temp: 55.9 C
Partition:
ID-1: / size: 915.52 GiB used: 462.92 GiB (50.6%) fs: ext4 dev: /dev/dm-0
mapped: luks-22a8480d-d2fc-4138-9985-b9f536d46090
ID-2: /boot/efi size: 299.4 MiB used: 452 KiB (0.1%) fs: vfat
dev: /dev/nvme1n1p1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 42.0 C mobo: N/A
Fan Speeds (rpm): cpu: 2500
Info:
Memory: total: 16 GiB available: 15.25 GiB used: 3.15 GiB (20.7%)
Processes: 386 Uptime: 3m Init: systemd
Packages: 1368 Compilers: gcc: 13.2.1 Shell: Zsh v: 5.9 inxi: 3.3.34
nvidia-smi 127 ✘
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.
You definitely should not have this and it would likely break other gfx drivers.
sudo mhwd -r pci video-vesa
I would also probably remove the others besides the prime one and then force reinstall the prime profile.
I dont know why you would have all of them.
But it would not be the first time I saw a user believe it was a good idea to install anything they found in mhwd.
In the future dont do that.
Even once everything is working correctly I would not expect this to function as written.
You have a hybrid system using PRIME.
(or will when the wrong drivers are removed and everything is fixed)
In order for the nvidia card to be used you would need to call it with prime-run
glxinfo | grep 'renderer string'
prime-run glxinfo | grep 'renderer string'
So
prime-run nvidia-smi
PS.
This is not an advisable way to provide system information.
It has not hidden personal information and has not provided a lot of good info like the running kernel.
Please use inxi -Farz.
In fact I am going to edit your output for now so certain text is no longer visible.
Hi, thank you very much for your help. I did as you said (removed video-vesa and reinstalled video-hybrid-intel-nvidia-prime. Here are some outputs from the current instance (6.9.0-arch1-1.2-g14)
prime-run nvidia-smi ✔ 9s
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.
nxi -Farz ✔
System:
Kernel: 6.9.0-arch1-1.2-g14 arch: x86_64 bits: 64 compiler: gcc v: 14.1.1
clocksource: tsc avail: acpi_pm parameters: ibt=off pm_debug_messages
amd_pmc.dyndbg="+p" acpi.dyndbg="file drivers/acpi/x86/s2idle.c +p"
BOOT_IMAGE=/boot/vmlinuz-linux-g14
root=UUID=69f33832-2afa-432a-8bc7-c192477b4244 rw quiet
cryptdevice=UUID=22a8480d-d2fc-4138-9985-b9f536d46090:luks-22a8480d-d2fc-4138-9985-b9f536d46090
root=/dev/mapper/luks-22a8480d-d2fc-4138-9985-b9f536d46090 splash
udev.log_priority=3
Desktop: KDE Plasma v: 6.0.4 tk: Qt v: N/A info: frameworks v: 6.1.0
wm: kwin_x11 vt: 2 dm: SDDM Distro: Manjaro base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: ASUS TUF Gaming F15 FX507ZV4_FX507ZV4
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: FX507ZV4 v: 1.0 serial: <superuser required>
uuid: <superuser required> UEFI: American Megatrends LLC. v: FX507ZV4.327
date: 02/29/2024
Battery:
ID-1: BAT0 charge: 78.2 Wh (98.0%) condition: 79.8/90.0 Wh (88.7%)
volts: 17.0 min: 15.9 model: AS3GWYF3KC GA50358 type: Unknown
serial: <filter> status: not charging
CPU:
Info: model: 12th Gen Intel Core i7-12700H bits: 64 type: MST AMCP
arch: Alder Lake gen: core 12 level: v3 note: check built: 2021+
process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154) stepping: 3
microcode: 0x432
Topology: cpus: 1x cores: 14 mt: 6 tpc: 2 st: 8 threads: 20 smt: enabled
cache: L1: 1.2 MiB desc: d-8x32 KiB, 6x48 KiB; i-6x32 KiB, 8x64 KiB
L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB desc: 1x24 MiB
Speed (MHz): avg: 898 high: 4700 min/max: 400/4600:4700:3500 scaling:
driver: intel_pstate governor: powersave cores: 1: 1344 2: 400 3: 400 4: 400
5: 4700 6: 400 7: 4700 8: 400 9: 400 10: 400 11: 400 12: 400 13: 400
14: 827 15: 400 16: 400 17: 400 18: 400 19: 400 20: 400 bogomips: 107560
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling mitigation: Clear Register File
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
conditional; RSB filling; PBRSB-eIBRS: SW sequence; BHI: BHI_DIS_S
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Alder Lake-P Integrated Graphics vendor: ASUSTeK
driver: i915 v: kernel alternate: xe arch: Gen-12.2 process: Intel 10nm
built: 2021-22+ ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4
bus-ID: 0000:00:02.0 chip-ID: 8086:4626 class-ID: 0300
Device-2: NVIDIA AD107M [GeForce RTX 4060 Max-Q / Mobile] vendor: ASUSTeK
driver: N/A non-free: 550.xx+ status: current (as of 2024-04) arch: Lovelace
code: AD1xx process: TSMC n4 (5nm) built: 2022+ bus-ID: 0000:01:00.0
chip-ID: 10de:28e0 class-ID: 0300
Device-3: Sonix USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-7:3 chip-ID: 322e:2233
class-ID: 0e02
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 23.2.6
compositor: kwin_x11 driver: X: loaded: modesetting alternate: fbdev,vesa
dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: BOE Display NE156FHM-NX6 built: 2022
res: 1920x1080 hz: 144 dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64")
diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
device: 1 drv: swrast surfaceless: drv: iris x11: drv: iris
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.0.6-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel Graphics (ADL GT2)
device-ID: 8086:4626 memory: 14.89 GiB unified: yes
API: Vulkan v: 1.3.279 layers: 5 device: 0 type: integrated-gpu name: Intel
Graphics (ADL GT2) driver: mesa intel v: 24.0.6-manjaro1.1
device-ID: 8086:4626 surfaces: xcb,xlib
Audio:
Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_tgl
bus-ID: 0000:00:1f.3 chip-ID: 8086:51c8 class-ID: 0403
Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 0000:01:00.1 chip-ID: 10de:22be class-ID: 0403
API: ALSA v: k6.9.0-arch1-1.2-g14 status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 0000:00:14.3 chip-ID: 8086:51f0 class-ID: 0280
IF: wlo1 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel port: 3000 bus-ID: 0000:37:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp55s0 state: down mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:4 chip-ID: 8087:0026
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
RAID:
Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
v: 0.6 port: N/A bus-ID: 0000:00:0e.0 chip-ID: 8086:467f rev: class-ID: 0104
Drives:
Local Storage: total: 1.38 TiB used: 462.9 GiB (32.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Micron model: 2400 MTFDKBA512QFM
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: V3MA003 temp: 35.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 2B2QEXM7 temp: 54.9 C scheme: GPT
Partition:
ID-1: / raw-size: 931.21 GiB size: 915.52 GiB (98.32%)
used: 462.9 GiB (50.6%) fs: ext4 dev: /dev/dm-0 maj-min: 254:0
mapped: luks-22a8480d-d2fc-4138-9985-b9f536d46090
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 452 KiB (0.1%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 46.0 C mobo: N/A
Fan Speeds (rpm): cpu: 2500
Repos:
Packages: pm: pacman pkgs: 1367 libs: 450 tools: pamac pm: flatpak pkgs: 0
Active pacman repo servers in: /etc/pacman.conf
1: https://arch.asus-linux.org
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: http://mirror.terrahost.no/linux/manjaro/stable/$repo/$arch
2: http://mirror.datacenter.by/pub/mirrors/manjaro/stable/$repo/$arch
3: https://fosszone.csd.auth.gr/manjaro/stable/$repo/$arch
4: https://uvermont.mm.fcix.net/manjaro/stable/$repo/$arch
5: https://mirror.math.princeton.edu/pub/manjaro/stable/$repo/$arch
6: https://volico.mm.fcix.net/manjaro/stable/$repo/$arch
7: https://mirror.xenyth.net/manjaro/stable/$repo/$arch
8: https://manjaro.c3sl.ufpr.br/stable/$repo/$arch
Info:
Memory: total: 16 GiB available: 15.25 GiB used: 3.42 GiB (22.5%)
Processes: 388 Power: uptime: 1m states: freeze,mem,disk suspend: s2idle
avail: deep wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6.08 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 255 default: graphical
tool: systemctl
Compilers: gcc: 13.2.1 Shell: Zsh v: 5.9 default: Bash v: 5.2.26
running-in: konsole inxi: 3.3.34
mhwd -li -l ✔
> Installed PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-modesetting 2020.01.13 true PCI
video-linux 2024.05.06 true PCI
video-hybrid-intel-nvidia-prime 2023.03.23 false PCI
Warning: No installed USB configs!
> 0000:37:00.0 (0200:10ec:8168) Network controller Realtek Semiconductor Co., Ltd.:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
network-r8168 2023.09.12 true PCI
> 0000:01:00.0 (0300:10de:28e0) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-prime 2023.03.23 false PCI
video-nvidia 2024.05.03 false PCI
video-linux 2024.05.06 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
> 0000:00:02.0 (0300:8086:4626) Display controller Intel Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-prime 2023.03.23 false PCI
video-linux 2024.05.06 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
Also, what about this?
journalctl -b | grep systemd-modules-load ✔
mag 27 23:53:21 davide-manjaro systemd-modules-load[386]: Failed to find module 'acpi_call'
mag 27 23:53:21 davide-manjaro systemd-modules-load[386]: Inserted module 'crypto_user'
mag 27 23:53:21 davide-manjaro systemd-modules-load[386]: Inserted module 'i2c_dev'
mag 27 23:53:21 davide-manjaro systemd-modules-load[386]: Failed to find module 'nvidia'
mag 27 23:53:21 davide-manjaro systemd-modules-load[386]: Failed to find module 'nvidia-drm'
mag 27 23:53:21 davide-manjaro systemd-modules-load[386]: Failed to find module 'nvidia-uvm'
Thank you for the tip con inxi. Also, the pc is now shutting down quickly again.
This probably means something or other has not happened correctly.
Please do;
sudo mhwd -r pci video-linux
sudo mhwd -f -i pci video-hybrid-intel-nvidia-prime
Please show the output of that last command.
EDIT.
Oh. I notice your kernel is some custom thing.
Please use a supported kernel.
mhwd will have tried to give you ,ex, linux66-nvidia … but such a package will not exist for another third party kernel.
sudo mhwd -r pci video-linux ✔
> Removing video-linux...
Sourcing /etc/mhwd-x86_64.conf
Has lib32 support: true
Sourcing /var/lib/mhwd/local/pci/video-linux/MHWDCONFIG
Processing classid: 0300
Sourcing /var/lib/mhwd/scripts/include/0300
Processing classid: 0380
Processing classid: 0302
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: removing libva-mesa-driver breaks dependency 'libva-mesa-driver' required by lib32-libva-mesa-driver
Error: pacman failed!
Error: script failed!
sudo mhwd -f -i pci video-hybrid-intel-nvidia-prime
What does it mean my kernel is a custom thing?
You are not using a supported manjaro kernel.
Please make sure to have, ex, 6.6 LTS installed.
sudo mhwd-kernel -i linux66
And boot into it.
You can select different kernels from Grub.
Grub being the boot loader that happens after BIOS but before login.
PS.
This is why this failed. But we can also skip this part, if only for now.
The kernel is the reason you dont have nvidia modules.
PPS.
Looking … it appears that the kernel you are currently using is linux-g14 from the AUR.
I know nothing about this kernel. But it will not work with mhwd profiles.
Well, I installed manjaro through the official iso and did nothing myself to modify the kernels. Initially I noticed the -g14 but being a newbie and coming from debian I tought it was an arch thing. However, if you look at my preovius posts, I tried installing the drivers on /boot/vmlinuz-6.8-x86_64, and I ended up getting a black screen. I will try now /boot/vmlinuz-6.9-x86_64 because downloading the 6.6 LTS will take a huge time with my connection.
Looking … it appears that the kernel you are currently using is linux-g14 from the AUR.
I know nothing about this kernel. But it will not work with mhwd profiles.
But why is it here then? Might it have soemthing to do with asus?
The ISO would not contain any AUR packages nor ‘upgrade’ to them by default.
In certain circumstances if the AUR is enabled in pamac then packages from the AUR may be pulled in as dependencies and even replace core packages - but I find it difficult to imagine a scenario where this would happen with a niche kernel series.
Only you would know.
Or the logs I suppose;
grep -i g14 /var/log/pacman.log
(pamac still writes to pacmans log)
So i booted into 6.9-MANJARO and I could getonly TTY, reinstalled the nvidia drivers just in case, and then just like in the 6.8-MANJARO the driver show as loaded in inxi and nvidia-smi runs.
However even after rebooting I still only can get into tty. if I run startx it says:
Unable connect to X server: connection refused
So in the Xorg.0.log:
[ 196.863]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 196.865] Current Operating System: Linux davide-manjaro 6.9.0-1-MANJARO #1 SMP PREEMPT_DYNAMIC Mon May 13 07:01:28 UTC 2024 x86_64
[ 196.865] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.9-x86_64 root=UUID=69f33832-2afa-432a-8bc7-c192477b4244 rw quiet cryptdevice=UUID=22a8480d-d2fc-4138-9985-b9f536d46090:luks-22a8480d-d2fc-4138-9985-b9f536d46090 root=/dev/mapper/luks-22a8480d-d2fc-4138-9985-b9f536d46090 splash udev.log_priority=3
[ 196.866]
[ 196.867] Current version of pixman: 0.43.4
[ 196.868] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 196.868] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 196.870] (==) Log file: "/home/davide/.local/share/xorg/Xorg.0.log", Time: Tue May 28 00:31:59 2024
[ 196.872] (==) Using config file: "/etc/X11/xorg.conf"
[ 196.873] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 196.874] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 196.874] (==) ServerLayout "layout"
[ 196.874] (**) |-->Screen "Screen0" (0)
[ 196.874] (**) | |-->Monitor "Monitor0"
[ 196.874] (**) | |-->Device "Device0"
[ 196.874] (**) Allowing byte-swapped clients
[ 196.874] (==) Automatically adding devices
[ 196.874] (==) Automatically enabling devices
[ 196.874] (==) Automatically adding GPU devices
[ 196.874] (==) Automatically binding GPU devices
[ 196.874] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 196.874] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 196.874] Entry deleted from font path.
[ 196.874] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 196.874] Entry deleted from font path.
[ 196.874] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 196.874] Entry deleted from font path.
[ 196.874] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 196.874] Entry deleted from font path.
[ 196.874] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 196.874] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 196.874] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 196.874] (II) Module ABI versions:
[ 196.874] X.Org ANSI C Emulation: 0.4
[ 196.874] X.Org Video Driver: 25.2
[ 196.874] X.Org XInput driver : 24.4
[ 196.874] X.Org Server Extension : 10.0
[ 196.874] (++) using VT number 3
[ 196.875] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 196.875] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 196.875] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 196.876] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 196.876] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 196.876] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 196.876] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 14 paused 0
[ 196.876] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 196.876] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 196.877] (--) PCI:*(0@0:2:0) 8086:4626:1043:277d rev 12, Mem @ 0x622e000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 196.877] (--) PCI: (1@0:0:0) 10de:28e0:1043:277d rev 161, Mem @ 0x5f000000/16777216, 0x6000000000/8589934592, 0x6200000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 196.877] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 196.877] (II) LoadModule: "glx"
[ 196.877] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 196.878] (II) Module glx: vendor="X.Org Foundation"
[ 196.878] compiled for 1.21.1.13, module version = 1.0.0
[ 196.878] ABI class: X.Org Server Extension, version 10.0
[ 196.878] (II) Applying OutputClass "intel" to /dev/dri/card1
[ 196.878] loading driver: modesetting
[ 196.878] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 196.878] loading driver: nvidia
[ 196.878] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 196.878] loading driver: nvidia
[ 197.324] (==) Matched modesetting as autoconfigured driver 0
[ 197.324] (==) Matched nvidia as autoconfigured driver 1
[ 197.324] (==) Matched nouveau as autoconfigured driver 2
[ 197.324] (==) Matched nv as autoconfigured driver 3
[ 197.324] (==) Matched fbdev as autoconfigured driver 4
[ 197.324] (==) Matched vesa as autoconfigured driver 5
[ 197.324] (==) Assigned the driver to the xf86ConfigLayout
[ 197.324] (II) LoadModule: "modesetting"
[ 197.324] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 197.324] (II) Module modesetting: vendor="X.Org Foundation"
[ 197.324] compiled for 1.21.1.13, module version = 1.21.1
[ 197.324] Module class: X.Org Video Driver
[ 197.324] ABI class: X.Org Video Driver, version 25.2
[ 197.324] (II) LoadModule: "nvidia"
[ 197.324] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 197.324] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 197.324] compiled for 1.6.99.901, module version = 1.0.0
[ 197.324] Module class: X.Org Video Driver
[ 197.324] (II) LoadModule: "nouveau"
[ 197.324] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 197.324] (II) Module nouveau: vendor="X.Org Foundation"
[ 197.324] compiled for 1.21.1.11, module version = 1.0.17
[ 197.324] Module class: X.Org Video Driver
[ 197.324] ABI class: X.Org Video Driver, version 25.2
[ 197.324] (II) LoadModule: "nv"
[ 197.324] (WW) Warning, couldn't open module nv
[ 197.324] (EE) Failed to load module "nv" (module does not exist, 0)
[ 197.324] (II) LoadModule: "fbdev"
[ 197.324] (WW) Warning, couldn't open module fbdev
[ 197.324] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 197.324] (II) LoadModule: "vesa"
[ 197.324] (WW) Warning, couldn't open module vesa
[ 197.324] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 197.324] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 197.324] (II) NVIDIA dlloader X Driver 550.78 Sun Apr 14 06:27:13 UTC 2024
[ 197.324] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 197.324] (II) NOUVEAU driver
[ 197.324] (II) NOUVEAU driver for NVIDIA chipset families :
[ 197.324] RIVA TNT (NV04)
[ 197.324] RIVA TNT2 (NV05)
[ 197.324] GeForce 256 (NV10)
[ 197.325] GeForce 2 (NV11, NV15)
[ 197.325] GeForce 4MX (NV17, NV18)
[ 197.325] GeForce 3 (NV20)
[ 197.325] GeForce 4Ti (NV25, NV28)
[ 197.325] GeForce FX (NV3x)
[ 197.325] GeForce 6 (NV4x)
[ 197.325] GeForce 7 (G7x)
[ 197.325] GeForce 8 (G8x)
[ 197.325] GeForce 9 (G9x)
[ 197.325] GeForce GTX 2xx/3xx (GT2xx)
[ 197.325] GeForce GTX 4xx/5xx (GFxxx)
[ 197.325] GeForce GTX 6xx/7xx (GKxxx)
[ 197.325] GeForce GTX 9xx (GMxxx)
[ 197.325] GeForce GTX 10xx (GPxxx)
[ 197.325] (II) modeset(0): using drv /dev/dri/card1
[ 197.325] (II) modeset(G0): using drv /dev/dri/card0
[ 197.325] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 197.325] (**) modeset(0): Depth 24, (--) framebuffer bpp 32
[ 197.325] (==) modeset(0): RGB weight 888
[ 197.325] (==) modeset(0): Default visual is TrueColor
[ 197.325] (II) Loading sub module "glamoregl"
[ 197.325] (II) LoadModule: "glamoregl"
[ 197.325] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 197.326] (II) Module glamoregl: vendor="X.Org Foundation"
[ 197.326] compiled for 1.21.1.13, module version = 1.0.1
[ 197.326] ABI class: X.Org ANSI C Emulation, version 0.4
[ 197.343] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 197.343] (II) modeset(0): glamor initialized
[ 197.343] (==) modeset(0): VariableRefresh: disabled
[ 197.343] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 197.346] (II) modeset(0): Output eDP-1 using monitor section Monitor0
[ 197.346] (II) modeset(0): Output DP-1 has no monitor section
[ 197.346] (II) modeset(0): Output DP-2 has no monitor section
[ 197.346] (II) modeset(0): Output DP-3 has no monitor section
[ 197.346] (II) modeset(0): Output DP-4 has no monitor section
[ 197.348] (II) modeset(0): EDID for output eDP-1
[ 197.348] (II) modeset(0): Manufacturer: BOE Model: b70 Serial#: 0
[ 197.348] (II) modeset(0): Year: 2022 Week: 30
[ 197.348] (II) modeset(0): EDID Version: 1.4
[ 197.348] (II) modeset(0): Digital Display Input
[ 197.348] (II) modeset(0): 8 bits per channel
[ 197.348] (II) modeset(0): Digital interface is DisplayPort
[ 197.348] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 197.348] (II) modeset(0): Gamma: 2.20
[ 197.348] (II) modeset(0): No DPMS capabilities specified
[ 197.348] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 197.348] (II) modeset(0): First detailed timing is preferred mode
[ 197.348] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 197.348] (II) modeset(0): Display is continuous-frequency
[ 197.348] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 197.348] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 197.348] (II) modeset(0): Manufacturer's mask: 0
[ 197.348] (II) modeset(0): Supported detailed timing:
[ 197.348] (II) modeset(0): clock: 144.5 MHz Image Size: 344 x 194 mm
[ 197.348] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 197.348] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1158 v_border: 0
[ 197.348] (II) modeset(0): Ranges: V min: 60 V max: 144 Hz, H min: 167 H max: 167 kHz, PixClock max 355 MHz
[ 197.348] (II) modeset(0): Monitor name: NE156FHM-NX6
[ 197.348] (II) modeset(0): Number of EDID sections to follow: 1
[ 197.348] (II) modeset(0): EDID (in hex):
[ 197.348] (II) modeset(0): 00ffffffffffff0009e5700b00000000
[ 197.348] (II) modeset(0): 1e200104a522137803ee95a3544c9926
[ 197.348] (II) modeset(0): 0f505400000001010101010101010101
[ 197.348] (II) modeset(0): 010101010101743880a070384e403020
[ 197.348] (II) modeset(0): 350058c21000001a000000fd003c90a7
[ 197.348] (II) modeset(0): a723010a202020202020000000fc004e
[ 197.348] (II) modeset(0): 4531353646484d2d4e58360a00000000
[ 197.348] (II) modeset(0): 000000000000000000000000000001d3
[ 197.348] (II) modeset(0): 7020790200220014db4a05847f079f00
[ 197.348] (II) modeset(0): 2f001f0037044d00020004002b000627
[ 197.348] (II) modeset(0): 003c8f00000000000000000000000000
[ 197.348] (II) modeset(0): 00000000000000000000000000000000
[ 197.348] (II) modeset(0): 00000000000000000000000000000000
[ 197.348] (II) modeset(0): 00000000000000000000000000000000
[ 197.348] (II) modeset(0): 00000000000000000000000000000000
[ 197.348] (II) modeset(0): 00000000000000000000000000005d90
[ 197.348] (II) modeset(0): Printing probed modes for output eDP-1
[ 197.348] (II) modeset(0): Modeline "1920x1080"x144.0 346.84 1920 1968 2000 2080 1080 1083 1088 1158 -hsync -vsync (166.8 kHz eP)
[ 197.348] (II) modeset(0): Modeline "1920x1080"x60.0 144.52 1920 1968 2000 2080 1080 1083 1088 1158 +hsync -vsync (69.5 kHz eP)
[ 197.348] (II) modeset(0): Modeline "1920x1080"x60.0 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 197.348] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "1600x900"x60.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "1600x900"x59.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1440x810"x60.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "1440x810"x60.0 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x800"x60.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x800"x60.0 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x720"x60.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x720"x60.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x768"x85.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x768i"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x720"x85.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 197.348] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x576"x60.0 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x576"x60.0 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x600"x59.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x540"x60.0 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x85.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x450"x59.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "800x450"x59.8 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x512"x85.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "700x450"x60.0 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "700x450"x59.9 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x480"x85.1 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 197.348] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "684x384"x59.9 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x400"x59.9 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x400"x60.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x360"x59.8 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 197.348] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 197.348] (II) modeset(0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 197.348] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "432x243"x59.9 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "432x243"x59.6 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 197.348] (II) modeset(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 197.348] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "360x202"x59.5 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 197.348] (II) modeset(0): Modeline "360x202"x59.1 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 197.348] (II) modeset(0): Modeline "360x200"x85.0 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "320x200"x85.3 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): Modeline "320x180"x59.8 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 197.348] (II) modeset(0): Modeline "320x180"x59.3 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 197.348] (II) modeset(0): Modeline "320x175"x85.3 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 197.348] (II) modeset(0): EDID for output DP-1
[ 197.348] (II) modeset(0): EDID for output DP-2
[ 197.348] (II) modeset(0): EDID for output DP-3
[ 197.349] (II) modeset(0): EDID for output DP-4
[ 197.349] (II) modeset(0): Output eDP-1 connected
[ 197.349] (II) modeset(0): Output DP-1 disconnected
[ 197.349] (II) modeset(0): Output DP-2 disconnected
[ 197.349] (II) modeset(0): Output DP-3 disconnected
[ 197.349] (II) modeset(0): Output DP-4 disconnected
[ 197.349] (II) modeset(0): Using exact sizes for initial modes
[ 197.349] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 197.349] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 197.349] (==) modeset(0): DPI set to (96, 96)
[ 197.349] (II) Loading sub module "fb"
[ 197.349] (II) LoadModule: "fb"
[ 197.349] (II) Module "fb" already built-in
[ 197.351] (**) modeset(G0): Depth 24, (--) framebuffer bpp 32
[ 197.351] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 197.351] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 197.351] (==) modeset(G0): RGB weight 888
[ 197.351] (==) modeset(G0): Default visual is TrueColor
[ 197.351] (II) Loading sub module "glamoregl"
[ 197.351] (II) LoadModule: "glamoregl"
[ 197.351] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 197.351] (II) Module glamoregl: vendor="X.Org Foundation"
[ 197.351] compiled for 1.21.1.13, module version = 1.0.1
[ 197.351] ABI class: X.Org ANSI C Emulation, version 0.4
[ 197.369] (II) modeset(G0): glamor X acceleration enabled on NVIDIA GeForce RTX 4060 Laptop GPU/PCIe/SSE2
[ 197.369] (II) modeset(G0): glamor initialized
[ 197.369] (II) modeset(G0): Output DP-1-5 using monitor section Monitor0
[ 197.369] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 197.369] (II) modeset(G0): Output eDP-1-2 has no monitor section
[ 197.369] (II) modeset(G0): EDID for output DP-1-5
[ 197.369] (II) modeset(G0): EDID for output HDMI-1-1
[ 197.369] (II) modeset(G0): EDID for output eDP-1-2
[ 197.369] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 197.369] (==) modeset(G0): DPI set to (96, 96)
[ 197.369] (II) Loading sub module "fb"
[ 197.369] (II) LoadModule: "fb"
[ 197.369] (II) Module "fb" already built-in
[ 197.369] (II) UnloadModule: "nvidia"
[ 197.369] (II) Unloading nvidia
[ 197.369] (II) UnloadModule: "nouveau"
[ 197.369] (II) Unloading nouveau
[ 197.387] (==) modeset(0): Backing store enabled
[ 197.387] (==) modeset(0): Silken mouse enabled
[ 197.427] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 197.428] (**) modeset(0): DPMS enabled
[ 197.428] (II) modeset(0): [DRI2] Setup complete
[ 197.428] (II) modeset(0): [DRI2] DRI driver: iris
[ 197.428] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 197.431] (==) modeset(G0): Backing store enabled
[ 197.431] (==) modeset(G0): Silken mouse enabled
[ 197.431] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 197.431] (**) modeset(G0): DPMS enabled
[ 197.431] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[ 197.431] (II) modeset(G0): [DRI2] Setup complete
[ 197.431] (II) modeset(G0): [DRI2] DRI driver: nouveau
[ 197.431] (II) modeset(G0): [DRI2] VDPAU driver: nouveau
[ 197.431] (II) Initializing extension Generic Event Extension
[ 197.431] (II) Initializing extension SHAPE
[ 197.431] (II) Initializing extension MIT-SHM
[ 197.431] (II) Initializing extension XInputExtension
[ 197.431] (II) Initializing extension XTEST
[ 197.431] (II) Initializing extension BIG-REQUESTS
[ 197.431] (II) Initializing extension SYNC
[ 197.431] (II) Initializing extension XKEYBOARD
[ 197.431] (II) Initializing extension XC-MISC
[ 197.431] (II) Initializing extension SECURITY
[ 197.431] (II) Initializing extension XFIXES
[ 197.432] (II) Initializing extension RENDER
[ 197.432] (II) Initializing extension RANDR
[ 197.432] (II) Initializing extension COMPOSITE
[ 197.432] (II) Initializing extension DAMAGE
[ 197.432] (II) Initializing extension MIT-SCREEN-SAVER
[ 197.432] (II) Initializing extension DOUBLE-BUFFER
[ 197.432] (II) Initializing extension RECORD
[ 197.432] (II) Initializing extension DPMS
[ 197.432] (II) Initializing extension Present
[ 197.432] (II) Initializing extension DRI3
[ 197.432] (II) Initializing extension X-Resource
[ 197.432] (II) Initializing extension XVideo
[ 197.432] (II) Initializing extension XVideo-MotionCompensation
[ 197.432] (II) Initializing extension GLX
[ 197.435] (II) AIGLX: Loaded and initialized iris
[ 197.435] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 197.435] (II) Initializing extension XFree86-VidModeExtension
[ 197.435] (II) Initializing extension XFree86-DGA
[ 197.435] (II) Initializing extension XFree86-DRI
[ 197.435] (II) Initializing extension DRI2
[ 197.435] (EE) modeset(G0): Failed to create pixmap
[ 197.435] (EE)
Fatal server error:
[ 197.435] (EE) failed to create screen resources(EE)
[ 197.435] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 197.435] (EE) Please also check the log file at "/home/davide/.local/share/xorg/Xorg.0.log" for additional information.
[ 197.435] (EE)
[ 197.435] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 197.463] (EE) Server terminated with error (1). Closing log file.
Here is the output for your command (20 may is when I installed manjaro) (today I updated kernels before doing any other change and nothing changed)
grep -i g14 /var/log/pacman.log ✔
[2024-05-20T12:31:31+0200] [ALPM] upgraded libpamac (11.6.4+1+g3fe0f42-1 -> 11.6.4+2+g1421283-1)
[2024-05-20T12:31:31+0200] [ALPM] upgraded libpamac-flatpak-plugin (11.6.4+1+g3fe0f42-1 -> 11.6.4+2+g1421283-1)
[2024-05-20T15:27:45+0200] [PACMAN] Running 'pacman -S linux-g14 6.9.1.arch1-1'
[2024-05-20T15:28:05+0200] [PACMAN] Running 'pacman -S linux-g14'
[2024-05-20T15:28:21+0200] [ALPM] installed linux-g14 (6.9.arch1-1.2)
[2024-05-20T15:28:22+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-20T15:28:22+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-20T15:28:22+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-20T15:28:25+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-20T15:28:29+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-20T15:28:29+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-20T15:28:29+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-20T15:28:39+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-20T15:28:50+0200] [ALPM-SCRIPTLET] Found linux image: /boot/vmlinuz-linux-g14
[2024-05-20T15:28:50+0200] [ALPM-SCRIPTLET] Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-g14.img
[2024-05-20T15:28:50+0200] [ALPM-SCRIPTLET] Found initrd fallback image: /boot/initramfs-linux-g14-fallback.img
[2024-05-20T15:29:09+0200] [PACMAN] Running 'pacman -S linux-g14-headers'
[2024-05-20T15:29:19+0200] [ALPM] installed linux-g14-headers (6.9.arch1-1.2)
[2024-05-22T22:47:48+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-22T22:47:48+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-22T22:47:48+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-22T22:47:52+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-22T22:47:55+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-22T22:47:55+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-22T22:47:55+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-22T22:48:05+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-22T22:48:48+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-22T22:48:48+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-22T22:48:48+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-22T22:48:51+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-22T22:48:55+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-22T22:48:55+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-22T22:48:55+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-22T22:49:04+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-22T23:12:29+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-22T23:12:29+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-22T23:12:29+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-22T23:12:33+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-22T23:12:37+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-22T23:12:37+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-22T23:12:37+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-22T23:12:47+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-22T23:13:30+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-22T23:13:30+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-22T23:13:30+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-22T23:13:33+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-22T23:13:37+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-22T23:13:37+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-22T23:13:37+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-22T23:13:46+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T00:08:56+0200] [PACMAN] Running 'pacman -S linux-g14-headers'
[2024-05-23T00:09:02+0200] [ALPM] reinstalled linux-g14-headers (6.9.arch1-1.2)
[2024-05-23T00:51:22+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T00:51:22+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T00:51:22+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:51:25+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T00:51:29+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T00:51:29+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T00:51:29+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:51:39+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T00:52:24+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T00:52:24+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T00:52:24+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:52:28+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T00:52:31+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T00:52:31+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T00:52:31+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:52:41+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T00:54:26+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T00:54:26+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T00:54:26+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:54:29+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T00:54:33+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T00:54:33+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T00:54:33+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:54:43+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T00:57:19+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T00:57:19+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T00:57:19+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:57:22+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T00:57:26+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T00:57:26+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T00:57:26+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:57:35+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T00:58:47+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T00:58:47+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T00:58:47+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:58:50+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T00:58:53+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T00:58:53+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T00:58:53+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:59:03+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T00:59:52+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T00:59:52+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T00:59:52+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T00:59:55+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T00:59:58+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T00:59:58+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T00:59:58+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T01:00:08+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T11:59:39+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T11:59:39+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T11:59:39+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T11:59:43+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T11:59:47+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T11:59:47+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T11:59:47+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T11:59:57+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T12:00:44+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T12:00:44+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T12:00:44+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T12:00:47+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T12:00:51+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T12:00:51+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T12:00:51+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T12:01:01+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T12:02:47+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T12:02:47+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T12:02:47+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T12:02:51+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T12:02:55+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T12:02:55+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T12:02:55+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T12:03:05+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-23T17:14:37+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod acpi_call/1.2.2 -k 6.9.0-arch1-1.2-g14
[2024-05-23T17:14:38+0200] [ALPM-SCRIPTLET] Error! Bad return status for module build on kernel: 6.9.0-arch1-1.2-g14 (x86_64)
[2024-05-23T17:14:38+0200] [ALPM-SCRIPTLET] ==> WARNING: `dkms install --no-depmod acpi_call/1.2.2 -k 6.9.0-arch1-1.2-g14' exited 10
[2024-05-23T17:15:13+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-23T17:15:13+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-23T17:15:13+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T17:15:17+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-23T17:15:20+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-23T17:15:20+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-23T17:15:21+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-23T17:15:31+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-24T20:10:01+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-24T20:10:01+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-24T20:10:01+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-24T20:10:05+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-24T20:10:09+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-24T20:10:09+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-24T20:10:09+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-24T20:10:19+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-24T20:11:04+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-24T20:11:04+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-24T20:11:04+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-24T20:11:08+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-24T20:11:11+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-24T20:11:11+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-24T20:11:11+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-24T20:11:21+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-24T20:13:45+0200] [PACMAN] Running 'pacman -S linux-modules-nvidia-6.9.0-arch1-1.2-g14'
[2024-05-24T20:35:41+0200] [ALPM-SCRIPTLET] Found linux image: /boot/vmlinuz-linux-g14
[2024-05-24T20:35:41+0200] [ALPM-SCRIPTLET] Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-g14.img
[2024-05-24T20:35:41+0200] [ALPM-SCRIPTLET] Found initrd fallback image: /boot/initramfs-linux-g14-fallback.img
[2024-05-27T23:26:10+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod acpi_call/1.2.2 -k 6.9.0-arch1-1.2-g14
[2024-05-27T23:26:11+0200] [ALPM-SCRIPTLET] Error! Bad return status for module build on kernel: 6.9.0-arch1-1.2-g14 (x86_64)
[2024-05-27T23:26:11+0200] [ALPM-SCRIPTLET] ==> WARNING: `dkms install --no-depmod acpi_call/1.2.2 -k 6.9.0-arch1-1.2-g14' exited 10
[2024-05-27T23:27:17+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-27T23:27:17+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-27T23:27:17+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-27T23:27:21+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-27T23:27:24+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-27T23:27:24+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-27T23:27:24+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-27T23:27:33+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-27T23:48:42+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-27T23:48:42+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-27T23:48:42+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-27T23:48:46+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-27T23:48:49+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-27T23:48:49+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-27T23:48:49+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-27T23:48:59+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-27T23:50:17+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-27T23:50:17+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-27T23:50:17+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-27T23:50:21+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-27T23:50:24+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-27T23:50:24+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-27T23:50:24+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.0-arch1-1.2-g14'
[2024-05-27T23:50:34+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-28T00:01:53+0200] [ALPM] upgraded linux-g14 (6.9.arch1-1.2 -> 6.9.2.arch1-1.1)
[2024-05-28T00:01:54+0200] [ALPM] upgraded linux-g14-headers (6.9.arch1-1.2 -> 6.9.2.arch1-1.1)
[2024-05-28T00:01:55+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod acpi_call/1.2.2 -k 6.9.2-arch1-1.1-g14
[2024-05-28T00:01:56+0200] [ALPM-SCRIPTLET] Error! Bad return status for module build on kernel: 6.9.2-arch1-1.1-g14 (x86_64)
[2024-05-28T00:01:56+0200] [ALPM-SCRIPTLET] ==> WARNING: `dkms install --no-depmod acpi_call/1.2.2 -k 6.9.2-arch1-1.1-g14' exited 10
[2024-05-28T00:01:56+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-28T00:01:56+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-28T00:01:56+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.2-arch1-1.1-g14'
[2024-05-28T00:02:00+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-28T00:02:03+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-28T00:02:03+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-28T00:02:03+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.2-arch1-1.1-g14'
[2024-05-28T00:02:13+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-28T00:02:24+0200] [ALPM-SCRIPTLET] Found linux image: /boot/vmlinuz-linux-g14
[2024-05-28T00:02:24+0200] [ALPM-SCRIPTLET] Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-g14.img
[2024-05-28T00:02:24+0200] [ALPM-SCRIPTLET] Found initrd fallback image: /boot/initramfs-linux-g14-fallback.img
[2024-05-28T00:22:43+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-28T00:22:43+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-28T00:22:43+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.2-arch1-1.1-g14'
[2024-05-28T00:22:47+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-28T00:22:50+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-28T00:22:50+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-28T00:22:50+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.2-arch1-1.1-g14'
[2024-05-28T00:23:00+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
[2024-05-28T00:24:18+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'default'
[2024-05-28T00:24:18+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14.img
[2024-05-28T00:24:18+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.2-arch1-1.1-g14'
[2024-05-28T00:24:21+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14.img'
[2024-05-28T00:24:24+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-g14.preset: 'fallback'
[2024-05-28T00:24:24+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-g14 -g /boot/initramfs-linux-g14-fallback.img -S autodetect
[2024-05-28T00:24:24+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.9.2-arch1-1.1-g14'
[2024-05-28T00:24:34+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux-g14-fallback.img'
I was wondering if I should run nvidia-xconfig somewhere sometime?
So at least we have assured that it is only g14 that does not load modules, the other two kernels work fine.
So on the 20th of May it was installed.
Why I do not know.
Yes, as expected you never had the nvidia modules.
Though I dont know exactly what you mean by ‘install nvidia’ - hopefully it was to use mhwd again.
If you dont have a reason for the g14 kernel then please remove it.
When you have removed the kernel and booted into a supported one then please perform the
sudo mhwd -f -i pci video-hybrid-intel-nvidia-prime
We would like to see the output from this.
Probably not. You should not be booting into using the nvidia … so you would not want to make nvidia-specific xorg configurations that apply generally.
Or if you do … then pay attention and make sure it is applied only to the nvidia - maybe making use of something like /etc/X11/xorg.conf.d/nvidia.conf - which you likely already have some version of.
So, I booted into TTY of 6.9-MANJARO, where nvidia divers were installed and loaded and everything (but the acreen is black and the system only usable with tty). I ran startx and it gave me the error that I posted before. So I ran nvidia-xconfig, and then i ran startx again which hanged my system. I am looking at the xorg log file but I’m on tty and I don’t know how to get that text copied here on my phone.
I will definitepy remove g14. Yes I have an nvidida.conf. also every time i installed or removed video drivers was via mhwd -a pci nonfree 0300 or mhwd -r etc.
If I recall there were issues with the 6.9 kernel and nvidia.
Make sure to check other kernels. Right now the latest Long Term Support kernel is 6.6.
But you may also want to make sure to do the KMS and DRM-KMS steps like here:
Just to add, news: i tried rebooting into 6.9-manjaro after i forced it shut because startx freezed the system, and now I get a purely black screen without even tty.
If I remember correctly from a couple of days ago when this happened already, now on order to fix it I have to run nvidia-xconfig from g14, and then maybe again on 6.9-manjaro and then I should be able to get the desktop back in g14.
I could try the lts kernel, tomorrow. However notice in my previous answers that I also tried the 6.8-manjaro kernel getting the same stuff as the 6.9-manjaro kernel (only tty or black screen without tty, drivers appearingly installed and working).
Do you suggest me to do some kind of driver/confif/xorg purge of data before retrying in lts kernel?
So remember when 6.9_MANJARO was showing a black screen at boot not even allowing me to run TTY? I hypotised that KDE was actually starting correctly, but it was starting on the dGPU card while my monitor, powered by the intel card, was black because it had nothing to show.
I confirmed this by forcing the “ultimate” dGPU-mode BIOS-wide. And as I suspected, 6.9-MANJARO showed my KDE desktop. I tried playing around creating corg config file via the nbidia-xsettings or the nvidia-settings gui but i still can’t see manjaro in hybrid mode.