I installed manjaro linux on my hp envy x360 laptop but no wifi are showing up. I managed to update my system though bluetooth tethering but nothing changed.
I found someone who had to reset his bios settings (https://forum.manjaro.org/t/i-cant-connect-to-wifi/119330) before being able to connect to his wifi and I think I have the same issue because when I type the following commands, I get the exact same results:
> sudo rmmod b43
rmmod: ERROR: Module b43 is not currently loaded
> sudo rmmod ssb
mmod: ERROR: Module ssb is not currently loaded
> sudo rmmod bcma
rmmod: ERROR: Module bcma is not currently loaded
> sudo modprobe -r wl
> sudo modprobe wl
I reset my bios settings twice but I still get the same outputs. I also couldn’t find the option to enable uefi or ahci.
Does someone have an idea what I could do?
Sorry, here is my inxi output:
System:
Kernel: 5.15.85-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=16d5ae98-ac98-413e-8071-6f9bb1acc02f rw quiet
cryptdevice=UUID=061f4376-ca0f-4d1f-a90e-f40883e44068:luks-061f4376-ca0f-4d1f-a90e-f40883e44068
root=/dev/mapper/luks-061f4376-ca0f-4d1f-a90e-f40883e44068
udev.log_priority=3
Desktop: KDE Plasma v: 5.26.4 tk: Qt v: 5.15.7 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Convertible System: HP product: HP ENVY x360 Convertible 15-eu0xxx
v: N/A serial: <superuser required> Chassis: type: 31
serial: <superuser required>
Mobo: HP model: 888A v: 63.49 serial: <superuser required> UEFI: AMI
v: F.06 date: 07/28/2021
Battery:
ID-1: BAT0 charge: 51.1 Wh (100.0%) condition: 51.1/51.1 Wh (100.0%)
volts: 12.9 min: 11.6 model: 333-27-3A-A BN03051XL type: Li-ion
serial: <filter> status: full cycles: 54
Device-1: hid-0018:04F3:2CFF.000A-battery model: ELAN2514:00 04F3:2CFF
serial: N/A charge: N/A status: N/A
Memory:
RAM: total: 14.98 GiB used: 3.12 GiB (20.9%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 2 gen: 3 level: v3 note: check built: 2020-22
process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x68 (104) stepping: 1
microcode: 0x8608103
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 8 MiB
desc: 2x4 MiB
Speed (MHz): avg: 1684 high: 3693 min/max: 1400/4056 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 3693 2: 2201
3: 1485 4: 1532 5: 1455 6: 1473 7: 1394 8: 1393 9: 1397 10: 1397 11: 1397
12: 1397 bogomips: 50322
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs
irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1
sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc
tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall
wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP
protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel
arch: GCN-5.1 code: Vega-2 process: TSMC n7 (7nm) built: 2018-21 pcie: gen: 3
speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports:
active: DP-1,eDP-1 empty: HDMI-A-1 bus-ID: 04:00.0 chip-ID: 1002:164c
class-ID: 0300 temp: 48.0 C
Display: x11 server: X.Org v: 21.1.6 compositor: kwin_x11 driver: X:
loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 5360x1440 s-dpi: 96 s-size: 1418x381mm (55.83x15.00")
s-diag: 1468mm (57.81")
Monitor-1: DP-1 mapped: DisplayPort-0 pos: primary,top-left
model: Gigabyte M34WQ serial: <filter> built: 2022 res: 3440x1440 hz: 144
dpi: 109 gamma: 1.2 size: 800x335mm (31.5x13.19") diag: 867mm (34.1")
modes: max: 3440x1440 min: 720x400
Monitor-2: eDP-1 mapped: eDP pos: bottom-r model: LG Display 0x069b
built: 2019 res: 1920x1080 hz: 60 dpi: 142 gamma: 1.2
size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: OpenGL v: 4.6 Mesa 22.3.1 renderer: AMD Radeon Graphics (renoir LLVM
14.0.6 DRM 3.42 5.15.85-1-MANJARO) direct render: Yes
Audio:
Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 04:00.1 chip-ID: 1002:1637
class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard
driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x,snd_pci_acp5x
pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s
bus-ID: 04:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 04:00.6 chip-ID: 1022:15e3
class-ID: 0403
Sound API: ALSA v: k5.15.85-1-MANJARO running: yes
Sound Server-1: JACK v: 1.9.21 running: no
Sound Server-2: PulseAudio v: 16.1 running: yes
Sound Server-3: PipeWire v: 0.3.63 running: yes
Network:
Device-1: Realtek RTL8852AE 802.11ax PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: N/A modules: wl pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 02:00.0 chip-ID: 10ec:8852 class-ID: 0280
IF-ID-1: bnep0 state: unknown speed: N/A duplex: N/A mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8
bus-ID: 3-3:2 chip-ID: 0bda:2852 class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
Device-1: luks-061f4376-ca0f-4d1f-a90e-f40883e44068 maj-min: 254:0
type: LUKS dm: dm-0 size: 244.14 GiB
Components:
p-1: nvme0n1p5 maj-min: 259:5 size: 244.14 GiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 476.94 GiB used: 13.01 GiB (2.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix
model: BC711 HFM512GD3JX013N size: 476.94 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: HPS1 temp: 31.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 244.14 GiB size: 239.25 GiB (98.00%) used: 12.95 GiB (5.4%)
fs: ext4 dev: /dev/dm-0 maj-min: 254:0
mapped: luks-061f4376-ca0f-4d1f-a90e-f40883e44068 label: N/A
uuid: 16d5ae98-ac98-413e-8071-6f9bb1acc02f
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%)
used: 65.5 MiB (25.6%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
label: SYSTEM uuid: 6645-7B97
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 231.92 GiB fs: bitlocker
label: N/A uuid: N/A
ID-3: /dev/nvme0n1p4 maj-min: 259:4 size: 616 MiB fs: ntfs
label: Windows RE tools uuid: FEC4FBB5C4FB6DF1
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Realtek RTS5411 Hub ports: 6 rev: 2.1 speed: 480 Mb/s
chip-ID: 0bda:5411 class-ID: 0900
Device-1: 1-1.1:4 info: ROCCAT Kain 120 Aimo type: Mouse,HID
driver: hid-generic,usbhid interfaces: 4 rev: 1.1 speed: 12 Mb/s power: 500mA
chip-ID: 1e7d:2d5c class-ID: 0300
Device-2: 1-1.2:5 info: ROCCAT Vulcan AIMO type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 4 rev: 2.0 speed: 12 Mb/s power: 500mA
chip-ID: 1e7d:3098 class-ID: 0300
Device-3: 1-1.6:6 info: Realtek HID Device type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 0bda:1100 class-ID: 0300
Device-4: 1-4:3 info: Elan Micro ELAN:ARM-M4 type: <vendor specific>
driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA
chip-ID: 04f3:0c4c class-ID: 0000
Hub-3: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-4: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-3:2 info: Realtek Bluetooth Radio type: Bluetooth driver: btusb
interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA chip-ID: 0bda:2852
class-ID: e001 serial: <filter>
Hub-5: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 52.0 C mobo: N/A gpu: amdgpu temp: 47.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 296 Uptime: 1h 52m wakeups: 9 Init: systemd v: 252
default: graphical tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6
Packages: pm: pacman pkgs: 1252 libs: 322 tools: pamac pm: flatpak pkgs: 0
Shell: Zsh v: 5.9 default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.24
It looks like you do not have the driver installed. It requires the following driver and you will also need the appropriate linux headers for your kernel as well as dkms installed.
https://aur.archlinux.org/packages/rtw89-dkms-git
In terminal:
pamac build rtw89-dkms-git
or install via pamac GUI and reboot
Also you don’t have a swapfile or swap partition. It would be a good idea to create one or the other.
system
28 December 2022 23:39
6
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
