Want to show a new inxi with the new kernel as well?
The original, as well as the mhwd output only show an intel.
Though the mhwd profile in use is a hybrid (prime) one.
If prime is working and there is a working nvidia, then you could test it like;
Normal execution (should output intel):
glxinfo | grep 'renderer string'
With prime-run (should output nvidia):
prime-run glxinfo | grep 'renderer string'
➜ ~ git:(master) glxinfo | grep 'renderer string'
OpenGL renderer string: Mesa Intel(R) Graphics (ADL GT2)
The outputs dont show any nvidia device.
Graphics:
Device-1: Intel Alder Lake-P GT1 [UHD Graphics] vendor: Micro-Star MSI
driver: i915 v: kernel arch: Gen-12.2 process: Intel 10nm built: 2021-22+
ports: active: eDP-1 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 00:02.0
chip-ID: 8086:46a3 class-ID: 0300
Device-2: Bison HD Webcam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-6:3 chip-ID: 5986:211b
class-ID: 0e02
Display: x11 server: X.org v: 1.21.1.13 compositor: Picom v: git-89c2c
driver: X: loaded: modesetting alternate: fbdev,vesa dri: iris gpu: i915
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-size: <missing: xdpyinfo>
Monitor-1: eDP-1 model: ChiMei InnoLux 0x1521 built: 2020 res: 1920x1080
hz: 144 dpi: 142 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5")
ratio: 16:9 modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
device: 1 drv: swrast surfaceless: drv: iris x11: drv: iris
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.0.6-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel Graphics (ADL GT2)
device-ID: 8086:46a3 memory: 14.97 GiB unified: yes
Are you sure its in there?
And not disconnected?
Or disabled by BIOS?
What does this mean?
Maybe show us installed packages;
pacman -Qs nvidia
local/egl-wayland 2:1.1.13-1
EGLStream-based Wayland external platform
local/envycontrol 3.4.0-2
Easy GPU switching for Nvidia Optimus laptops
local/lib32-libvdpau 1.5-2
Nvidia VDPAU library
local/lib32-nvidia-utils 550.78-1
NVIDIA drivers utilities (32-bit)
local/lib32-vulkan-nouveau 1:24.0.6-1
Open-source Vulkan driver for Nvidia GPUs - 32-bit
local/libvdpau 1.5-2
Nvidia VDPAU library
local/libxnvctrl 550.78-1
NVIDIA NV-CONTROL X extension
local/mhwd-nvidia 550.78-1
MHWD module-ids for nvidia 550.78
local/mhwd-nvidia-390xx 390.157-10
MHWD module-ids for nvidia 390.157
local/mhwd-nvidia-470xx 470.239.06-1
MHWD module-ids for nvidia 470.239.06
local/nvidia-dkms 550.78-1
NVIDIA drivers - module sources
local/nvidia-prime 1.0-4
NVIDIA Prime Render Offload configuration and utilities
local/nvidia-settings 550.78-1
Tool for configuring the NVIDIA graphics driver
local/nvidia-utils 550.78-1
NVIDIA drivers utilities
local/vulkan-nouveau 1:24.0.6-1
Open-source Vulkan driver for Nvidia GPUs
local/xf86-video-nouveau 1.0.17-3 (xorg-drivers)
Open Source 3D acceleration driver for nVidia cards
I don’t think I disabled it, but I can check in BIOS. But I think it’s not recognized that’s the issue.
You shouldnt have this.
So you did install drivers the wrong way.
sudo pacman -Rns nvidia-dkms
sudo mhwd -f -i pci video-hybrid-intel-nvidia-prime
Then there is
Did you use envycontrol or try some other method to set iGPU only ?
probably i did experiment with prime-select or something yes i used it, i just chedked the history
envycontrol -s integrated
deleting
> Removing video-hybrid-intel-nvidia-prime...
Sourcing /etc/mhwd-x86_64.conf
Has lib32 support: true
Sourcing /var/lib/mhwd/local/pci/video-hybrid-intel-nvidia-prime/MHWDCONFIG
Processing classid: 0300
Sourcing /var/lib/mhwd/scripts/include/0300
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: removing libxnvctrl breaks dependency 'libxnvctrl' required by conky
:: removing libxnvctrl breaks dependency 'libXNVCtrl.so=0-64' required by conky
Error: pacman failed!
Error: script failed!
breaks conky what should i do? remove conky?
I guess so. You can reinstall it again afterwards.
We are just trying to get you on the correct packages (like linux66-nvidia, etc).
You will have the correct dependencies, but its technically uninstalling first.
That might explain it. Assuming there is a working nvidia to find that was there before.
sudo envycontrol -s hybrid
Will put you back in the normal ‘hybrid’ mode.
(By the way - this is how your system would be anyways by default without envycontrol. tools like envycontrol only provide you the ability to switch to iGPU-only or dGPU-only in an easy way)
ok now i did
``
sudo pacman -Rdd conky
and followed your commadns
what’s the next step?
After you switch modes reboot and check your inxi again.
If there is an nvidia visible then check prime-run
When I restart my i3wm doens’t load my wm and it keeps blinking so I use to go to another tty7 and I can see there’s Nvidia 3050
what should I? not sure why the wm doesn’t load it keeps blinking here’s dmesg output
The inxi does list an nvidia now, which is good.
I dont know a whole lot about particulars of nvidia itself, but some blackscreen type issues have been associated with KMS (or the lack thereof).
no i mean i cannot load my wm anymore when i turn on hybrid, i rebuilt the kms and modules and grub again but still no luck, any ideas?
I understand that now with the nvidia no longer disabled you experience desktop errors.
I have mentioned KMS (and DRM-KMS) because they have been related to some nvidia issues. But I do not have an nvidia so I dont know all of their finer points. By the way the KMS instructions were not simply to rebuild intramfs but to ensure certain options are applied.
i see nouveau is loading in xorg how can i force to use nvidia?
I highly doubt that is the issue and/or it is how you perceive it.
According to your inxi output for example the nvidia is set to use the proprietary module;
Device-2: NVIDIA GA107M [GeForce RTX 3050 Mobile] vendor: Micro-Star MSI
driver: nvidia
Besides ensuring those paramaters like shown above my other guess would be another configuration left somewhere from previously. Like with envycontrol … have you placed any xorg configuration files or set any boot options? (and again there are probably boot options you should set, as linked above)
i added all the above link options, rebuild grub and HOOKS still no luck. I didnot change anything since I"M using Manjaro i3wm defaults.
if there’s nothing else i can do, i appeciate your efforts,i will search for more thanks alot.
Looks like you are loading the nouveau driver.
[ 940.340] (II) LoadModule: "nouveau"
[ 940.340] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 940.341] (II) Module nouveau: vendor="X.Org Foundation"
[ 940.341] compiled for 1.21.1.11, module version = 1.0.17
[ 940.341] Module class: X.Org Video Driver
[ 940.341] ABI class: X.Org Video Driver, version 25.2
This driver seems to conflict with the NVidia driver as described below.
https://wiki.manjaro.org/index.php/Configure_NVIDIA_(non-free)_settings_and_load_them_on_Startup
If you look under the troubleshooting section you will see how to fix this issue.