Hi folks, I ran into some issues after the removal of optimus-manager from my laptop with intel/nvidia dual graphics. I did that, because nvidia-prime seems to be the way to handle optimus-switching in the future.
Because my system did some unexpected things in steam games after the optimus-manager removal, I deleted and re-installed the non-free nvidia drivers. I also removed the intel-, nvidia- and mhwd-config-files in /etc/X11/xorg.conf.d . After that I ran mhwd -lh.
Right now most things seem to work, but my scanner software VueScan has a massive startup lag - even after re-installing it several times from the AUR or as a flatpack. When I start it (with or without prime-run), it freezes at the small startup-window, but the actual program starts after around 7 minutes. And I still have some quirks in certain games.
Probably I broke a config somewhere, but I don’t know where to look at… Any suggestions?
- Please read this:
[HowTo] Provide System Information
and post some more information so we can see what’s really going on. Now we know the symptom of the disease, but we need some more probing to know where the origin lies…
- An
inxi --admin --verbosity=7 --filter --no-host --widthwould be the minimum required information for us to be able to help you. (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
Also, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text. - Executing VueScan in a terminal and providing the output would be helpful as well.
P.S. If you enter a bit more details in your profile, we can also see which Desktop Environment you’re using, which exact CPU/GPU or Kernel, … you have without typing it every time
System:
Kernel: 5.13.5-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64
root=UUID=9e744c1a-ec40-4c90-b092-da43ca14110d rw quiet
cryptdevice=UUID=3352fb98-8855-4902-9528-db429256c07d:luks-3352fb98-8855-4902-9528-db429256c07d
root=/dev/mapper/luks-3352fb98-8855-4902-9528-db429256c07d
resume=/dev/mapper/luks-3352fb98-8855-4902-9528-db429256c07d apparmor=1
security=apparmor udev.log_priority=3
Desktop: Xfce 4.16.0 tk: Gtk 3.24.29 info: xfce4-panel wm: xfwm 4.16.1
dm: LightDM 1.30.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Micro-Star product: GE73 Raider RGB 8RF v: REV:1.0
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Micro-Star model: MS-17C5 v: REV:1.0 serial: <filter>
UEFI: American Megatrends v: E17C5IMS.10F date: 05/20/2019
Battery:
ID-1: BAT1 charge: 39.3 Wh (97.3%) condition: 40.4/53.4 Wh (75.6%)
volts: 11.9 min: 10.9 model: MSI BIF0_9 type: Li-ion serial: N/A
status: Unknown
Memory:
RAM: total: 15.48 GiB used: 2.08 GiB (13.4%)
Array-1: capacity: 32 GiB slots: 2 EC: None max-module-size: 16 GiB
note: est.
Device-1: ChannelA-DIMM0 size: 16 GiB speed: 2667 MT/s type: DDR4
detail: synchronous bus-width: 64 bits total: 64 bits manufacturer: Samsung
part-no: M471A2K43CB1-CTD serial: <filter>
Device-2: ChannelB-DIMM0 size: No Module Installed
CPU:
Info: 6-Core model: Intel Core i7-8750H socket: U3E1 bits: 64 type: MT MCP
arch: Kaby Lake note: check family: 6 model-id: 9E (158) stepping: A (10)
microcode: EA cache: L1: 384 KiB L2: 9 MiB L3: 9 MiB bogomips: 52815
Speed: 4095 MHz min/max: 800/4100 MHz base/boost: 2100/8300 volts: 0.8 V
ext-clock: 100 MHz Core speeds (MHz): 1: 4095 2: 4057 3: 4102 4: 4100
5: 4101 6: 4100 7: 4098 8: 4086 9: 4001 10: 4099 11: 4092 12: 4000
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Micro-Star MSI
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3e9b class-ID: 0300
Device-2: NVIDIA GP104M [GeForce GTX 1070 Mobile] vendor: Micro-Star MSI
driver: nvidia v: 470.57.02 alternate: nouveau,nvidia_drm bus-ID: 01:00.0
chip-ID: 10de:1ba1 class-ID: 0300
Device-3: Acer HD Webcam type: USB driver: uvcvideo bus-ID: 1-13:13
chip-ID: 5986:1140 class-ID: 0e02 serial: <filter>
Device-4: Logitech HD Pro Webcam C920 type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-4.1:8 chip-ID: 046d:082d
class-ID: 0102 serial: <filter>
Display: server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver:
loaded: modesetting,nvidia alternate: fbdev,intel,nouveau,nv,vesa
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP-1 res: 1920x1080 dpi: 128 size: 381x214mm (15.0x8.4")
diag: 437mm (17.2")
Monitor-2: HDMI-1-0 res: 1920x1080 hz: 60 dpi: 92
size: 531x298mm (20.9x11.7") diag: 609mm (24")
OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 21.1.5
direct render: Yes
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
Device-2: Logitech HD Pro Webcam C920 type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-4.1:8 chip-ID: 046d:082d
class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.13.5-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 1.9.19 running: no
Sound Server-4: PulseAudio v: 14.2 running: no
Sound Server-5: PipeWire v: 0.3.32 running: yes
Network:
Device-1: Intel Cannon Lake PCH CNVi WiFi driver: iwlwifi v: kernel
port: 6000 bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280
IF: wlo1 state: down mac: <filter>
Device-2: Qualcomm Atheros Killer E2500 Gigabit Ethernet
vendor: Micro-Star MSI driver: alx v: kernel port: 3000 bus-ID: 03:00.0
chip-ID: 1969:e0b1 class-ID: 0200
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-3: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152
bus-ID: 2-3.4.4:5 chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
IF: enp0s20f0u3u4u4 state: down mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB
driver: btusb v: 0.8 bus-ID: 1-14:15 chip-ID: 8087:0aaa class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 1 state: up address: <filter>
Logical:
Message: No logical block device data found.
Device-1: luks-654e7435-e8ca-4b13-8abb-18733a64eff7 maj-min: 254:1
type: LUKS dm: dm-1 size: 1.82 TiB
Components:
p-1: sda1 maj-min: 8:1 size: 1.82 TiB
Device-2: luks-3352fb98-8855-4902-9528-db429256c07d maj-min: 254:0
type: LUKS dm: dm-0 size: 237.47 GiB
Components:
p-1: nvme0n1p2 maj-min: 259:2 size: 237.47 GiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 2.05 TiB used: 1.26 TiB (61.5%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: RBUSNS8154P3256GJ
size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 15.8 Gb/s
lanes: 2 type: SSD serial: <filter> rev: E8FK11.C temp: 41.9 C scheme: GPT
SMART: yes health: PASSED on: 30d 6h cycles: 1,127
read-units: 13,241,884 [6.77 TB] written-units: 11,227,076 [5.74 TB]
ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT2000MX500SSD1
family: Micron Client SSDs size: 1.82 TiB block-size: physical: 512 B
logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD serial: <filter> rev: 023
temp: 31 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 122d 16h cycles: 1047
written: 7.4 TiB
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 237.47 GiB size: 232.74 GiB (98.01%)
used: 136.37 GiB (58.6%) fs: ext4 block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-3352fb98-8855-4902-9528-db429256c07d label: N/A
uuid: 9e744c1a-ec40-4c90-b092-da43ca14110d
ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%)
used: 444 KiB (0.0%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
maj-min: 259:1 label: N/A uuid: 6C3E-CC70
ID-3: /home raw-size: 1.82 TiB size: 1.79 TiB (98.38%)
used: 1.13 TiB (63.1%) fs: ext4 block-size: 4096 B dev: /dev/dm-1
maj-min: 254:1 mapped: luks-654e7435-e8ca-4b13-8abb-18733a64eff7 label: N/A
uuid: eebc0eac-242a-49fb-b6d2-968d79f5c330
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-1:2 info: Razer USA BlackWidow Lite (2018) type: Keyboard,Mouse
driver: razerkbd,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 500mA
chip-ID: 1532:0235 class-ID: 0300
Device-2: 1-2:3 info: Razer USA DeathAdder Elite type: Mouse,Keyboard
driver: razermouse,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 500mA
chip-ID: 1532:005c class-ID: 0300
Hub-2: 1-3:4 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
chip-ID: 0bda:5411 class-ID: 0900
Hub-3: 1-3.4:16 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
chip-ID: 0bda:5411 class-ID: 0900
Hub-4: 1-4:5 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
chip-ID: 2109:2815 class-ID: 0900
Device-1: 1-4.1:8 info: Logitech HD Pro Webcam C920 type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 500mA chip-ID: 046d:082d class-ID: 0102 serial: <filter>
Device-2: 1-6:7 info: SteelSeries ApS SteelSeries ALC type: HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 300mA chip-ID: 1038:1124 class-ID: 0300
Device-3: 1-7:10 info: Realtek RTS5129 Card Reader Controller
type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129
class-ID: ff00 serial: <filter>
Device-4: 1-9:11 info: SteelSeries ApS SteelSeries KLC type: HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 300mA chip-ID: 1038:1122 class-ID: 0300
Device-5: 1-13:13 info: Acer HD Webcam type: Video driver: uvcvideo
interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 5986:1140
class-ID: 0e02 serial: <filter>
Device-6: 1-14:15 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP)
type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 8087:0aaa class-ID: e001
Hub-5: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-6: 2-3:2 info: Realtek Hub ports: 4 rev: 3.0 speed: 5 Gb/s
chip-ID: 0bda:0411 class-ID: 0900
Hub-7: 2-3.4:4 info: Realtek Hub ports: 4 rev: 3.0 speed: 5 Gb/s
chip-ID: 0bda:0411 class-ID: 0900
Device-1: 2-3.4.4:5 info: Realtek RTL8153 Gigabit Ethernet Adapter
type: Network driver: r8152 interfaces: 1 rev: 3.0 speed: 5 Gb/s
power: 256mA chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
Hub-8: 2-4:3 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.2 speed: 5 Gb/s
chip-ID: 2109:0815 class-ID: 0900
Sensors:
System Temperatures: cpu: 48.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 351 Uptime: 4m wakeups: 1 Init: systemd v: 248 tool: systemctl
Compilers: gcc: 11.1.0 alt: 10 clang: 12.0.1 Packages: 1961 note: see --pkg
pacman: 1933 lib: 483 flatpak: 25 snap: 3 Shell: Zsh (sudo) v: 5.8
default: Bash v: 5.1.8 running-in: terminator inxi: 3.3.06
Executing vuescan via terminal generates no output at all. I presume, that it is scanning for hardware (i.e. available scanners/cameras) during the startup every time.
Another oddity after removing optimus-manager and the mentioned files in xorg.conf.d is, that mouse and external keyboard (both Razer products) are available when I have to enter the disk encryption password, than are not available at the xfce password screen (I have to use the laptop keyboard) and than also need some time (~1-2min) to be detected when the desktop is already booted. Keyboard and mouse become available, when the bluetooth icon is appearing. So could it probably be a USB config issue?
please install both 5.4 and 5.10 LTS (Long Time Support) and see which one of the two troubles you least.
Does this also happen when you create a new user and log in there? (E.G. fumum_vendidi2)
Well, I don’t think it is a kernel issue, because I was on 5.13.5-1 before and did not have any trouble until removing the mentioned program/config files. I already tried a fallback on 5.10 LTS and the issues were the same.
edit:
- Same VueScan behaviour with different user.
- Meanwhile I did some more testing and it seams to be an issue with messed up hardware detection. I ran VueScan via terminal an tried to run mhwd and inxi in other terminal windows during the lag phase. Both inxi and mhwd stalled. Other operations in terminal windows (i.e. nano, etc.) worked normally.
How do I fix a messed up mhwd / hardware detection config? Uninstalling and re-installing mhwd made no difference.
I still couldn’t fix my issues, but now I am quite convinced it has something to do with hardware detection. The detection of external mouse and keyboard takes much longer than before the mentioned removal of optimus-manager and config files. The slow startup of VueScan also seems to be an issue of laggy hardware detection. Maybe it has something to do with Xorg and/or Lightdm.
Does nobody have an idea how to find the issue and fix it? I really don’t want to re-install the whole system from scratch.
gscan2pdf is available from the community repository and works fine here in infrequent use. Maybe give that one a try?
Well, VueScan does work fine after about 7 or so minutes. My intention is to fix the underlying problem.