Hey everyone, I’ve been trying to dual-boot Manjaro KDE alongside Windows 10, and I’ve hit some roadblocks. Here’s my setup: Disk 1: Windows 10 only Disk 2: Contains my personal files + newly created partitions for Manjaro: One partition for Root (/) One partition for /boot/efi I installed Manj…

Thank you everyone for the support—I found the issue. It was my SATA enclosure. The enclosure was connected using IDE mode, which doesn’t support loading the kernel. Unfortunately, my BIOS doesn’t allow me to force the enclosure to use an AHCI connection. So, I mounted my boot mount point on a disk…

recheck info for linux in your UEFI disable secure boot disable fastboot disks on AHCI no legacy no CSM UEFI only or others ( not windows ) create profile for linux you should see UEFI < USB vendor name > < partition 1 > → boot in EFI reboot on USB live manjaro and recheck all ( report if any …

Hey Thanks for the support, i tried everything you have mentioned, Here is the complete konsole log. everything seems to be fine yet i still gets the Issue, (even before grubmenu) “error: Environment block too small. error: failure reading sector 0x38a96d80 fron ‘hd2’ error: you need to load th…

have you installed this ? -> Running post hook: [sbctl] Secureboot key directory doesn't exist, not signing! you should read carefully [image] [root tip] [How To] Manjaro and Windows - Secure Boot - using repo only Tutorials About Secure Boot Secure Boot is…

I’m sorry but confused with you question. I have disabled my sercue boot in my BIOS settings and not cleared Sercue boot keys. Do i need to do so ? Also do i need to install sbctl and follow all the commands in given url ? That seems like huge work

i cant go further , because you cant boot with secure boot with USB live iso. can you explain where come this sbctl ? have you used a script / git / github ? @linux-aarhus : is there a solution , because this need a chroot , and we cant activate secure boot with USB live iso

[image] Da_Yvez: I have disabled my sercue boot in my BIOS settings and not cleared Sercue boot keys. Do i need to do so ? No that is not necessary - disabling secure boot is prerequisite to boot a Manjaro ISO. [image] Da_Yvez: Also do i need to install sbctl and follow all the commands …

One notice before everything Basically my root mount point on a disk which is connected via my cd/dvd rom. coz im tryina install this to old lap which doesnt have any extra storage. As per @stephane ’s instructions i booted into live usb (secure boot off) and logged into chroot and tired grub-insta…

[image] Da_Yvez: after executing that is the part where i got that sbctl error yet the execution completes. It is not an error - it is an information. Just like these are warning messages … [image] Da_Yvez: ==> WARNING: Possibly missing firmware for module: 'wd719x' ==> WARNING: Possibl…

[image] linux-aarhus: This is a message telling you the key is not present - this is not an error - unless you expect the keys to be present - and you don’t - right? Yes, I dont need those keys im already booting windows with rescue boot off. Does that using Sata enclose mounted disk for my …

[image] Da_Yvez: I have disabled my sercue boot in my BIOS settings and not cleared Sercue boot keys. Do i need to do so ? Generally, yes, but please see your mainboard BIOS manual to verify the exact procedure; it can vary per manufacturer. [image] Da_Yvez: grub-install --target=x86_64-…

Manjaro KDE Bootloader - dual disk issue

Support

stephane 5 May 2025 19:57 4

have you installed this ?

  -> Running post hook: [sbctl]
Secureboot key directory doesn't exist, not signing!

you should read carefully