I have a Lenovo Yoga 500-14ISK. The touchscreen works in Windows but isn’t showing up in Manjaro via lsusb, lspci, or inxi. Please help. I am familiar with Linux and bash, but I haven’t messed around with low level configuration and files before.
Welcome to Manjaro!
- Please read this:
How to provide good information
and press the three dots … below your post and press the
to give us more information so we can see what’s really going on.
Now we know the symptom of the disease, but we need some more probing to know where the origin lies…
- An
inxi --admin --verbosity=7 --filter --no-host --widthwould be the minimum required information for us to be able to help you. (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
Also, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text.
Please post the output of the following commands:
sudo timeout 3 libinput debug-events
ls /sys/bus/{acpi,i2c,hid}/devices/
1 Like
@Fabby The output to inxi --admin --verbosity=7 --filter --no-host --width is:
System:
Kernel: 5.13.12-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64
root=UUID=627b3b47-b880-4200-8cf4-2d279a3a7786 rw quiet splash apparmor=1
security=apparmor resume=UUID=2a228369-5b99-4713-9ae0-6efe56039559
udev.log_priority=3
Desktop: GNOME 40.4 tk: GTK 3.24.30 wm: gnome-shell dm: GDM 40.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 80R5 v: Lenovo Yoga 500-14ISK
serial: <filter> Chassis: type: 10 v: Lenovo Yoga 500-14ISK serial: <filter>
Mobo: LENOVO model: Lenovo Yoga 500-14ISK v: SDK0J40679 WIN serial: <filter>
UEFI: LENOVO v: D3CN39WW date: 06/26/2018
Battery:
ID-1: BAT0 charge: 30.2 Wh (62.5%) condition: 48.3/52.5 Wh (92.0%)
volts: 11.7 min: 11.4 model: LGC L15L3PB0 type: Li-poly serial: <filter>
status: Discharging
Memory:
RAM: total: 3.64 GiB used: 2.62 GiB (71.9%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Dual Core model: Intel Core i5-6200U bits: 64 type: MT MCP
arch: Skylake family: 6 model-id: 4E (78) stepping: 3 microcode: EA cache:
L2: 3 MiB bogomips: 19204
Speed: 680 MHz min/max: 400/2300 MHz Core speeds (MHz): 1: 680 2: 647 3: 748
4: 638
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Lenovo driver: i915
v: kernel bus-ID: 00:02.0 chip-ID: 8086:1916 class-ID: 0300
Device-2: NVIDIA GK208BM [GeForce 920M] vendor: Lenovo driver: nouveau
v: kernel bus-ID: 01:00.0 chip-ID: 10de:1299 class-ID: 0302
Display: wayland server: X.org 1.20.13 compositor: gnome-shell driver:
loaded: nouveau note: n/a (using device driver) - try sudo/root
display-ID: 0 resolution: <missing: xdpyinfo>
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 21.2.1
direct render: Yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo
driver: snd_hda_intel v: kernel alternate: snd_soc_skl bus-ID: 00:1f.3
chip-ID: 8086:9d70 class-ID: 0403
Device-2: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel v: kernel
bus-ID: 01:00.1 chip-ID: 10de:0e0f class-ID: 0403
Sound Server-1: ALSA v: k5.13.12-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.33 running: yes
Network:
Device-1: Intel Dual Band Wireless-AC 3165 Plus Bluetooth driver: iwlwifi
v: kernel port: d000 bus-ID: 02:00.0 chip-ID: 8086:3166 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel port: c000 bus-ID: 03:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp3s0 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
bus-ID: 1-8:3 chip-ID: 8087:0a2a class-ID: e001
Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 476.94 GiB used: 21.68 GiB (4.5%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Intel model: SSDSC2KW512G8
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 004C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 369.46 GiB size: 362.59 GiB (98.14%)
used: 21.33 GiB (5.9%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
uuid: 627b3b47-b880-4200-8cf4-2d279a3a7786
ID-2: /boot/efi raw-size: 500 MiB size: 499 MiB (99.80%)
used: 25.6 MiB (5.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: NO_LABEL
uuid: 2ABA-9241
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 5.87 GiB used: 334 MiB (5.6%)
priority: -2 dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: 2a228369-5b99-4713-9ae0-6efe56039559
Unmounted:
ID-1: /dev/sda4 maj-min: 8:4 size: 101.12 GiB fs: ntfs label: N/A
uuid: 3414C4D714C49D6C
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-8:3 info: Intel Bluetooth wireless interface type: Bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
chip-ID: 8087:0a2a class-ID: e001
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 39.0 C mobo: 39.0 C gpu: nouveau temp: 41.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 256 Uptime: 42m wakeups: 8 Init: systemd v: 248 tool: systemctl
Compilers: gcc: 11.1.0 Packages: 1257 pacman: 1252 lib: 305 flatpak: 5
Shell: Zsh v: 5.8 running-in: gnome-terminal inxi: 3.3.06
@pobrn The output to sudo timeout 3 libinput debug-events is:
-event2 DEVICE_ADDED Power Button seat0 default group1 cap:k
-event7 DEVICE_ADDED Video Bus seat0 default group2 cap:k
-event8 DEVICE_ADDED Video Bus seat0 default group2 cap:k
-event0 DEVICE_ADDED Lid Switch seat0 default group3 cap:S
-event1 DEVICE_ADDED Sleep Button seat0 default group4 cap:k
-event4 DEVICE_ADDED Ideapad extra buttons seat0 default group5 cap:k
-event3 DEVICE_ADDED AT Translated Set 2 keyboard seat0 default group6 cap:k
-event6 DEVICE_ADDED ETPS/2 Elantech Touchpad seat0 default group7 cap:pg size 98x61mm tap(dl off) left scroll-nat scroll-2fg-edge click-buttonareas-clickfinger dwt-on
-event16 DEVICE_ADDED SPA8000B (AVRCP) seat0 default group8 cap:k
The output to ls /sys/bus/{acpi,i2c,hid}/devices/ is:
/sys/bus/acpi/devices/:
ACPI0003:00 device:25 device:4c IDEA0100:00 INT3472:06 LNXTHERM:00
ACPI000C:00 device:26 device:4d IMPJ0003:00 INT3472:07 LNXTHERM:01
device:00 device:27 device:4e INT0000:00 INT3F0D:00 LNXVIDEO:00
device:01 device:28 device:4f INT0800:00 LNXCPU:00 LNXVIDEO:01
device:02 device:29 device:50 INT0E0C:00 LNXCPU:01 MSFT0101:00
device:03 device:2a device:51 INT3394:00 LNXCPU:02 PNP0000:00
device:04 device:2b device:52 INT339B:00 LNXCPU:03 PNP0100:00
device:05 device:2c device:53 INT33A1:00 LNXCPU:04 PNP0103:00
device:06 device:2d device:54 INT33A2:00 LNXCPU:05 PNP0A08:00
device:07 device:2e device:55 INT33A3:00 LNXCPU:06 PNP0B00:00
device:08 device:2f device:56 INT33D1:00 LNXCPU:07 PNP0C02:00
device:09 device:30 device:57 INT33D3:00 LNXPOWER:00 PNP0C02:01
device:0a device:31 device:58 INT33D6:00 LNXPOWER:01 PNP0C02:02
device:0b device:32 device:59 INT33E1:00 LNXPOWER:02 PNP0C02:03
device:0c device:33 device:5a INT3420:00 LNXPOWER:03 PNP0C02:04
device:0d device:34 device:5b INT3420:01 LNXPOWER:04 PNP0C02:05
device:0e device:35 device:5c INT343D:00 LNXPOWER:05 PNP0C04:00
device:0f device:36 device:5d INT343E:00 LNXPOWER:06 PNP0C09:00
device:10 device:37 device:5e INT3440:00 LNXPOWER:07 PNP0C0A:00
device:11 device:38 device:5f INT3441:00 LNXPOWER:08 PNP0C0D:00
device:12 device:39 device:60 INT3443:00 LNXPOWER:09 PNP0C0E:00
device:13 device:3a device:61 INT3444:00 LNXPOWER:0a PNP0C0F:00
device:14 device:3b device:62 INT3445:00 LNXPOWER:0b PNP0C0F:01
device:15 device:3c device:63 INT3446:00 LNXPOWER:0c PNP0C0F:02
device:16 device:3d device:64 INT3447:00 LNXPOWER:0d PNP0C0F:03
device:17 device:3e device:65 INT3448:00 LNXPOWER:0e PNP0C0F:04
device:18 device:3f device:66 INT3449:00 LNXPOWER:0f PNP0C0F:05
device:19 device:40 device:67 INT344A:00 LNXPOWER:10 PNP0C0F:06
device:1a device:41 device:68 INT344B:00 LNXPOWER:11 PNP0C0F:07
device:1b device:42 device:69 INT3471:00 LNXPOWER:12 PNP0C14:00
device:1c device:43 device:6a INT3471:01 LNXPOWER:13 PNP0C14:01
device:1d device:44 device:6b INT3471:02 LNXPOWER:14 PNP0C14:02
device:1e device:45 device:6c INT3471:03 LNXPOWER:15 VPC2004:00
device:1f device:46 device:6d INT3472:00 LNXPOWER:16 XXXX0000:00
device:20 device:47 device:6e INT3472:01 LNXPOWER:17 XXXX0000:01
device:21 device:48 device:6f INT3472:02 LNXPWRBN:00 ZIC0201:00
device:22 device:49 device:70 INT3472:03 LNXSYBUS:00
device:23 device:4a ETD0633:00 INT3472:04 LNXSYBUS:01
device:24 device:4b FPNT_DIS:00 INT3472:05 LNXSYSTM:00
/sys/bus/hid/devices/:
0018:0416:C300.0001
/sys/bus/i2c/devices/:
1-0052 i2c-10 i2c-13 i2c-16 i2c-3 i2c-6 i2c-9
i2c-0 i2c-11 i2c-14 i2c-17 i2c-4 i2c-7 i2c-INT33D1:00
i2c-1 i2c-12 i2c-15 i2c-2 i2c-5 i2c-8
-
In the future, when providing code/output, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text so that the output looks like this:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.instead of like this:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.`
(as that makes both our lives much easier)
-
No need to do anything right now as I’m a moderator here on this site and have fixed it for you already. However, in the future I might not see your post so review my edits by pushing the orange pencil above the post I just fixed.
-
We won’t charge you more
if you make longer posts that combine all required information into one. 
-
Do you have a compelling reason to be on 5.13 Stable?
-
That seems rather old: have you tried updating your UEFI firmware yet???
Could you also run
head /sys/bus/acpi/devices/*/modalias
?
hey sorry im new to markdown formatting. yes im sorry for not providing adequate information but i had no idea how to use inxi and whenever i previously tried using it, i ended up with way too much information about my computer i couldnt make heads or tales of. my UEFI firmare, which i presume means my BIOS version, hasn’t been updated by Lenovo since 2016. this laptop was launched in 2014-16 if my memory serves me right. as for 5.13 stable, I have absolutely no idea. I just installed manjaro, ran sudo pacman -Syu, and started using the laptop. i don’t know what kernel headers etc are, i don’t know how to change kernel versions. all i know is that uname -r shows the kernel version.
UPDATE: I spent half an hour trying to use it in Windows, the hardware is malfunctioning never mind. thanks regardless, fabby and pobrn
Topic closed as the hardware was malfunctioning (Windows had the same issues)