Laptop will not come back after Monitor was in Standby

I have setup my Laptop so, that it will never go to sleep, when it is connected to power. This is fine so far. But sometimes i have to disconnect it from power and use it over standard battery. In this case, the monitor seems to shut off after a while. But i cant it bring back online. I have tried to press some keys on the keyboard, press the power button, functions keys and more, but the monitor will not come back. Keyboard keys are illuminated.

Any idea what’s going on, or where i can have a look?

System:
  Kernel: 5.15.28-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
    root=UUID=8ac9a376-24de-45e0-866b-20343fa36fee rw quiet splash
    udev.log_priority=3 acpi_osi=! "acpi_osi=Windows 2018"
  Desktop: GNOME v: 41.4 tk: GTK v: 3.24.33 wm: gnome-shell dm: GDM v: 41.3
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: Micro-Star product: GP72 7RD v: REV:1.0
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: Micro-Star model: MS-1799 v: REV:1.0 serial: <superuser required>
    UEFI: American Megatrends v: E1799IMS.324 date: 03/23/2018
Battery:
  ID-1: BAT1 charge: 33.5 Wh (98.0%) condition: 34.2/42.4 Wh (80.6%)
    volts: 12.2 min: 10.8 model: MSI BIF0_9 type: Li-ion serial: N/A status: N/A
Memory:
  RAM: total: 15.55 GiB used: 2.43 GiB (15.6%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Core i5-7300HQ bits: 64 type: MCP arch: Kaby Lake
    family: 6 model-id: 0x9E (158) stepping: 9 microcode: 0xEC
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB
    desc: 1x6 MiB
  Speed (MHz): avg: 1285 high: 1366 min/max: 800/3500 scaling:
    driver: intel_pstate governor: powersave cores: 1: 1281 2: 1366 3: 1296
    4: 1200 bogomips: 20004
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt
    cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts
    epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr
    ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid
    invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr
    nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln
    pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep smap
    smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
    tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave
    xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
    mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: disabled, RSB filling
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel HD Graphics 630 vendor: Micro-Star MSI driver: i915
    v: kernel ports: active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0
    chip-ID: 8086:591b class-ID: 0300
  Device-2: NVIDIA GP107M [GeForce GTX 1050 Mobile] vendor: Micro-Star MSI
    driver: nvidia v: 510.54 alternate: nouveau,nvidia_drm pcie: gen: 1
    speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.0
    chip-ID: 10de:1c8d class-ID: 0302
  Display: x11 server: X.Org v: 1.21.1.3 compositor: gnome-shell driver: X:
    loaded: modesetting,nvidia alternate: fbdev,nouveau,nv,vesa gpu: i915
    display-ID: :1 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: ChiMei InnoLux 0x1735 built: 2014 res: 1920x1080
    hz: 60 dpi: 128 gamma: 1.2 size: 382x215mm (15.04x8.46") diag: 438mm (17.3")
    ratio: 16:9 modes: 1920x1080
  OpenGL: renderer: Mesa Intel HD Graphics 630 (KBL GT2) v: 4.6 Mesa 21.3.7
    direct render: Yes
Audio:
  Device-1: Intel CM238 HD Audio vendor: Micro-Star MSI driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a171 class-ID: 0403
  Sound Server-1: ALSA v: k5.15.28-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel Dual Band Wireless-AC 3168NGW [Stone Peak] driver: iwlwifi
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0
    chip-ID: 8086:24fb class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Qualcomm Atheros Killer E2500 Gigabit Ethernet
    vendor: Micro-Star MSI driver: alx v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: d000 bus-ID: 03:00.0 chip-ID: 1969:e0b1 class-ID: 0200
  IF: enp3s0 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel Wireless-AC 3168 Bluetooth type: USB driver: btusb v: 0.8
    bus-ID: 1-10:3 chip-ID: 8087:0aa7 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.94 TiB used: 1.21 TiB (62.7%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: RBUSNS8180S3128GI1
    size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 60B9 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 870 QVO 2TB
    size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 1B6Q scheme: GPT
  Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GUD0N rev: 1.00
    dev-links: cdrom
  Features: speed: 24 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
  ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 44.19 GiB (92.5%)
    fs: ext4 dev: /dev/sdb3 maj-min: 8:19 label: N/A
    uuid: 8ac9a376-24de-45e0-866b-20343fa36fee
  ID-2: /boot/efi raw-size: 300 MiB size: 296 MiB (98.67%)
    used: 50.9 MiB (17.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: SYSTEM
    uuid: 2271-30CB
  ID-3: /mnt/2E44E50D44E4D89B raw-size: 1.58 TiB size: 1.58 TiB (100.00%)
    used: 964.35 GiB (59.6%) fs: ntfs dev: /dev/sdb2 maj-min: 8:18 label: Volume
    uuid: 2E44E50D44E4D89B
  ID-4: /mnt/AE5871BE5871863D raw-size: 117.94 GiB
    size: 117.94 GiB (100.00%) used: 96.76 GiB (82.0%) fs: ntfs dev: /dev/sda3
    maj-min: 8:3 label: Windows uuid: AE5871BE5871863D
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda2 maj-min: 8:2 size: 128 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-2: /dev/sda4 maj-min: 8:4 size: 900 MiB fs: ntfs label: WinRE tools
    uuid: DC5672D25672ACC0
  ID-3: /dev/sdb1 maj-min: 8:17 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-7:6 info: MSI steel series rgb keyboard type: HID
    driver: gt683r_led,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 2mA
    chip-ID: 1770:ff00 class-ID: 0300 serial: <filter>
  Device-2: 1-10:3 info: Intel Wireless-AC 3168 Bluetooth type: Bluetooth
    driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
    chip-ID: 8087:0aa7 class-ID: e001
  Device-3: 1-12:4 info: Realtek RTS5129 Card Reader Controller
    type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
    interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129
    class-ID: ff00 serial: <filter>
  Hub-2: 2-0:1 info: Super-speed hub ports: 8 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 49.0 C pch: 54.0 C mobo: 27.8 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 230 Uptime: 6h 39m wakeups: 3 Init: systemd v: 250
  tool: systemctl Compilers: gcc: 11.2.0 clang: 13.0.1 Packages: 1703
  pacman: 1697 lib: 479 flatpak: 6 Shell: Ba
sh v: 5.1.16
  running-in: gnome-terminal inxi: 3.3.14

Welcome to Manjaro! :smiling_face_with_three_hearts:

  1. Please read the information behind this link. It will help you to post necessary information. [HowTo] Provide System Information
  2. Please press the three dots below your post and then press the :pencil2:
  • If you give us information about your system, we can see what we’re talking about and make better suggestions.
  • You can do this by using inxi in a terminal or in console.
inxi --admin --verbosity=7 --filter --no-host --width
  • Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
  • Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.
  1. Copy the output from inxi (including the command) and paste it into your post.
  • To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

I have added the inxi information.