Is this behavior normal? Plasma Shell and other things too many entries

Hey, everyone. Recently I moved back to KDE (2 weeks old install) fully updated.

Looking at Htop this looks very weird to me. Never seen such behavior in previous installs of KDE (arch and ubuntu-based),

You can check it here:

qBittorrent has a lot of entries too.

The first screenshot is right after a reboot.
The second one is after a couple of hours of usage. And my system becomes sluggish and stuff is opening a lot slower.

  Kernel: 5.10.7-3-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64 
  root=UUID=59eab1cd-71fd-4073-a7e5-e54f837e4eec ro quiet udev.log_priority=3 
  Desktop: KDE Plasma 5.20.5 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM 
  Distro: Manjaro Linux 
  Type: Laptop System: Acer product: Aspire ES1-512 v: V1.10 serial: <filter> 
  Mobo: Acer model: Aspire ES1-512 v: V1.10 serial: <filter> UEFI: Insyde 
  v: 1.10 date: 12/15/2014 
  ID-1: BAT0 charge: 26.3 Wh condition: 26.3/36.7 Wh (72%) volts: 12.3/11.4 
  model: LGC AC14B18J type: Li-ion serial: <filter> status: Full 
  Info: Dual Core model: Intel Celeron N2840 bits: 64 type: MCP 
  arch: Silvermont family: 6 model-id: 37 (55) stepping: 8 microcode: 838 
  L2 cache: 1024 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 8671 
  Speed: 556 MHz min/max: 500/2582 MHz Core speeds (MHz): 1: 556 2: 588 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds mitigation: Clear CPU buffers; SMT disabled 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass status: Not affected 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, 
  IBRS_FW, STIBP: disabled, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display 
  vendor: Acer Incorporated ALI driver: i915 v: kernel bus ID: 00:02.0 
  chip ID: 8086:0f31 
  Device-2: Chicony VGA Webcam type: USB driver: uvcvideo bus ID: 1-4:4 
  chip ID: 04f2:b47f serial: <filter> 
  Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: 
  loaded: intel unloaded: modesetting alternate: fbdev,vesa display ID: :0 
  screens: 1 
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0") 
  s-diag: 414mm (16.3") 
  OpenGL: renderer: Mesa DRI Intel HD Graphics (BYT) v: 4.2 Mesa 20.3.3 
  compat-v: 3.0 direct render: Yes 
  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio 
  vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel 
  bus ID: 00:1b.0 chip ID: 8086:0f04 
  Sound Server: ALSA v: k5.10.7-3-MANJARO 
  Device-1: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter 
  vendor: Lite-On driver: ath9k v: kernel port: 2000 bus ID: 02:00.0 
  chip ID: 168c:0036 
  IF: wls2 state: down mac: <filter> 
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Acer Incorporated ALI driver: r8169 v: kernel port: 1000 
  bus ID: 03:00.0 chip ID: 10ec:8168 
  IF: ens3 state: up speed: 100 Mbps duplex: full mac: <filter> 
  Device-3: Lite-On Atheros AR3012 Bluetooth type: USB driver: btusb 
  bus ID: 1-3.1:7 chip ID: 04ca:300b 
  Local Storage: total: 931.51 GiB used: 121.9 GiB (13.1%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10JPVX-22JC3T0 
  size: 931.51 GiB block size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s 
  serial: <filter> rev: 1A01 
  ID-1: / raw size: 931.22 GiB size: 915.6 GiB (98.32%) 
  used: 121.9 GiB (13.3%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 
  ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%) 
  used: 312 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 
  Alert: No Swap data was found. 
  System Temperatures: cpu: 47.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
  Processes: 172 Uptime: 5h 01m wakeups: 1 Memory: 3.73 GiB 
  used: 2.12 GiB (56.9%) Init: systemd v: 247 Compilers: gcc: N/A 
  Packages: 1169 pacman: 1159 lib: 358 snap: 10 Shell: Bash v: 5.1.0 
  running in: yakuake inxi: 3.2.02

New members are limited - that is intentional - as images are not searchable and therefore useless.

But you can however post the output from terminal - and do remember to select all pasted text - then click </> in the post toolbar - to properly format the pasted text.

I am no a KDE user primarily because Plasma shell can quickly become a resource hog - that is how it is - you need to constantly watch it - that is how it is - and I don’t want to spent my time tracking resource usage.

Please take a look at this topic on how to provide usable information

Thanks, added the hardware.
From the rest not sure what exactly to add.