Alarg
September 6, 2020, 1:11pm
1
Using KDE Manjaro Stable (latest build, updated) on Lenovo Ideapad S540-14IWL
When I plug in the headphones via 3.5mm jack, sound keeps going through the speakers only. Headphones work, as tested on my mobile phone.
I’m relatively new to Linux so I can’t start searching for the problem at all. I hope someone could help me push this through.
Regards,
1 Like
mielouk
September 6, 2020, 2:01pm
2
Hello and welcome to Manjaro.
Either you have to select the the output via the means of KDE or you install pavucontrol-qt with which it should be quite easy to select the source.
1 Like
Alarg
September 6, 2020, 5:51pm
4
Hey!
Thanks for the suggestion. I tried it and I can’t see any attached devices, which is strange. I’ve just switched to Windows (dual booted) and the headphones work there.
I’ll keep looking further and let others know if I solved this.
Regards,
BG405
September 6, 2020, 6:23pm
5
@Alarg : I may not be able to help specifically but outputs of inxi --full --admin --verbosity=7 --filter --no-hostpacmd list-sinks
1 Like
Alarg
September 6, 2020, 7:20pm
6
Thanks! I’m attaching them below:
System: Kernel: 5.8.3-2-MANJARO x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.8-x86_64 root=UUID=982e11fd-ce8c-4ee8-ba1a-2514517a0246 rw quiet
apparmor=1 security=apparmor resume=UUID=b02c7e05-f919-41c9-abd6-1700a9c0cca3 udev.log_priority=3
Desktop: KDE Plasma 5.19.4 tk: Qt 5.15.0 wm: kwin_x11 dm: SDDM Distro: Manjaro Linux
Machine: Type: Laptop System: LENOVO product: 81ND v: Lenovo IdeaPad S540-14IWL serial: <filter> Chassis: type: 10
v: Lenovo IdeaPad S540-14IWL serial: <filter>
Mobo: LENOVO model: LNVNB161216 v: No DPK serial: <filter> UEFI: LENOVO v: AHCN32WW(V2.09) date: 07/15/2020
Battery: ID-1: BAT1 charge: 41.3 Wh condition: 41.3/45.0 Wh (92%) volts: 17.3/15.4
model: 0x53 0x4D 0x50 0x00 0x32 0x30 0x PABAS0241231 type: Li-ion serial: <filter> status: Full cycles: 169
Memory: RAM: total: 7.62 GiB used: 1.32 GiB (17.3%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: Quad Core model: Intel Core i5-8265U bits: 64 type: MT MCP arch: Kaby Lake family: 6
model-id: 8E (142) stepping: C (12) microcode: D6 L2 cache: 6144 KiB bogomips: 28808
Speed: 799 MHz min/max: 400/3900 MHz Core speeds (MHz): 1: 801 2: 800 3: 800 4: 800 5: 800 6: 800 7: 799
8: 800
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities arch_perfmon art avx avx2 bmi1
bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept
ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify
ibpb ibrs ibrs_enhanced ida intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx
msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2
tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves
xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds mitigation: TSX disabled
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel UHD Graphics 620 vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:3ea0
Device-2: NVIDIA GP108M [GeForce MX250] driver: N/A alternate: nouveau, nvidia_drm, nvidia bus ID: 01:00.0
chip ID: 10de:1d13
Device-3: Chicony Integrated Camera type: USB driver: uvcvideo bus ID: 1-6:3 chip ID: 04f2:b61e
serial: <filter>
Display: x11 server: X.Org 1.20.8 compositor: kwin_x11 driver: modesetting display ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9")
Monitor-1: eDP-1 res: 1920x1080 hz: 60 dpi: 158 size: 309x174mm (12.2x6.9") diag: 355mm (14")
OpenGL: renderer: Mesa Intel UHD Graphics 620 (WHL GT2) v: 4.6 Mesa 20.1.6 direct render: Yes
Audio: Device-1: Intel Cannon Point-LP High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel
alternate: snd_soc_skl,snd_sof_pci bus ID: 00:1f.3 chip ID: 8086:9dc8
Sound Server: ALSA v: k5.8.3-2-MANJARO
Network: Device-1: Intel Cannon Point-LP CNVi [Wireless-AC] driver: iwlwifi v: kernel port: 4000 bus ID: 00:14.3
chip ID: 8086:9df0
IF: wlp0s20f3 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Drives: Local Storage: total: 238.47 GiB used: 40.85 GiB (17.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFS256GD9TNG-L3A0B size: 238.47 GiB block size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 80040C10 scheme: GPT
Message: No Optical or Floppy data was found.
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 50.00 GiB size: 48.97 GiB (97.93%) used: 21.78 GiB (44.5%) fs: ext4 dev: /dev/nvme0n1p6
label: N/A uuid: 982e11fd-ce8c-4ee8-ba1a-2514517a0246
ID-2: /boot/efi raw size: 100.0 MiB size: 96.0 MiB (96.00%) used: 25.3 MiB (26.3%) fs: vfat
dev: /dev/nvme0n1p1 label: N/A uuid: BA9B-6A66
ID-3: /home raw size: 150.36 GiB size: 147.00 GiB (97.77%) used: 19.05 GiB (13.0%) fs: ext4
dev: /dev/nvme0n1p7 label: N/A uuid: d647bcdb-0f81-412f-b6c4-a1ecfd198122
Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.00 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p3 label: N/A
uuid: b02c7e05-f919-41c9-abd6-1700a9c0cca3
Unmounted: ID-1: /dev/nvme0n1p2 size: 16.0 MiB fs: <superuser/root required> label: N/A uuid: N/A
ID-2: /dev/nvme0n1p4 size: 29.50 GiB fs: ntfs label: N/A uuid: EABEB95DBEB922CD
ID-3: /dev/nvme0n1p5 size: 505.0 MiB fs: ntfs label: N/A uuid: 40AAD50FAAD501F8
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 1-2:2 info: Lenovo Lenovo 300 Wireless Compact Mouse type: Mouse driver: hid-generic,usbhid
interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 17ef:60ac
Device-2: 1-6:3 info: Chicony Integrated Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0
speed: 480 Mb/s chip ID: 04f2:b61e serial: <filter>
Device-3: 1-7:4 info: Shenzhen Goodix Fingerprint Reader type: <vendor specific> driver: N/A interfaces: 1
rev: 2.0 speed: 480 Mb/s chip ID: 27c6:55b4
Device-4: 1-10:5 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 8087:0aaa
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.1 speed: 10 Gb/s chip ID: 1d6b:0003
Sensors: System Temperatures: cpu: 38.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 249 Uptime: 5h 31m Init: systemd v: 246 Compilers: gcc: 10.2.0 alt: 9 Packages: 1589 pacman: 1584
lib: 470 flatpak: 5 Shell: Zsh v: 5.8 running in: konsole inxi: 3.1.05
also:
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 36043 / 55% / -15,58 dB, front-right: 36043 / 55% / -15,58 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX8070 Analog"
alsa.id = "CX8070 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0x9431c000 irq 148"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9dc8"
device.product.name = "Cannon Point-LP High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "384000"
device.buffering.fragment_size = "192000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Conexant CX8070"
alsa.components = "HDA:14f11f86,17aa3811,00100100 HDA:8086280b,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
active port: <analog-output-speaker>
Alarg
September 6, 2020, 7:21pm
7
Also, after plugging in the headphones:
System: Kernel: 5.8.3-2-MANJARO x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.8-x86_64 root=UUID=982e11fd-ce8c-4ee8-ba1a-2514517a0246 rw quiet
apparmor=1 security=apparmor resume=UUID=b02c7e05-f919-41c9-abd6-1700a9c0cca3 udev.log_priority=3
Desktop: KDE Plasma 5.19.4 tk: Qt 5.15.0 wm: kwin_x11 dm: SDDM Distro: Manjaro Linux
Machine: Type: Laptop System: LENOVO product: 81ND v: Lenovo IdeaPad S540-14IWL serial: <filter> Chassis: type: 10
v: Lenovo IdeaPad S540-14IWL serial: <filter>
Mobo: LENOVO model: LNVNB161216 v: No DPK serial: <filter> UEFI: LENOVO v: AHCN32WW(V2.09) date: 07/15/2020
Battery: ID-1: BAT1 charge: 41.3 Wh condition: 41.3/45.0 Wh (92%) volts: 17.3/15.4
model: 0x53 0x4D 0x50 0x00 0x32 0x30 0x PABAS0241231 type: Li-ion serial: <filter> status: Full cycles: 169
Memory: RAM: total: 7.62 GiB used: 1.28 GiB (16.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: Quad Core model: Intel Core i5-8265U bits: 64 type: MT MCP arch: Kaby Lake family: 6
model-id: 8E (142) stepping: C (12) microcode: D6 L2 cache: 6144 KiB bogomips: 28808
Speed: 800 MHz min/max: 400/3900 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800
8: 800
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities arch_perfmon art avx avx2 bmi1
bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept
ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify
ibpb ibrs ibrs_enhanced ida intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx
msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2
tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves
xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds mitigation: TSX disabled
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel UHD Graphics 620 vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:3ea0
Device-2: NVIDIA GP108M [GeForce MX250] driver: N/A alternate: nouveau, nvidia_drm, nvidia bus ID: 01:00.0
chip ID: 10de:1d13
Device-3: Chicony Integrated Camera type: USB driver: uvcvideo bus ID: 1-6:3 chip ID: 04f2:b61e
serial: <filter>
Display: x11 server: X.Org 1.20.8 compositor: kwin_x11 driver: modesetting display ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9")
Monitor-1: eDP-1 res: 1920x1080 hz: 60 dpi: 158 size: 309x174mm (12.2x6.9") diag: 355mm (14")
OpenGL: renderer: Mesa Intel UHD Graphics 620 (WHL GT2) v: 4.6 Mesa 20.1.6 direct render: Yes
Audio: Device-1: Intel Cannon Point-LP High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel
alternate: snd_soc_skl,snd_sof_pci bus ID: 00:1f.3 chip ID: 8086:9dc8
Sound Server: ALSA v: k5.8.3-2-MANJARO
Network: Device-1: Intel Cannon Point-LP CNVi [Wireless-AC] driver: iwlwifi v: kernel port: 4000 bus ID: 00:14.3
chip ID: 8086:9df0
IF: wlp0s20f3 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Drives: Local Storage: total: 238.47 GiB used: 40.86 GiB (17.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFS256GD9TNG-L3A0B size: 238.47 GiB block size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 80040C10 scheme: GPT
Message: No Optical or Floppy data was found.
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 50.00 GiB size: 48.97 GiB (97.93%) used: 21.78 GiB (44.5%) fs: ext4 dev: /dev/nvme0n1p6
label: N/A uuid: 982e11fd-ce8c-4ee8-ba1a-2514517a0246
ID-2: /boot/efi raw size: 100.0 MiB size: 96.0 MiB (96.00%) used: 25.3 MiB (26.3%) fs: vfat
dev: /dev/nvme0n1p1 label: N/A uuid: BA9B-6A66
ID-3: /home raw size: 150.36 GiB size: 147.00 GiB (97.77%) used: 19.05 GiB (13.0%) fs: ext4
dev: /dev/nvme0n1p7 label: N/A uuid: d647bcdb-0f81-412f-b6c4-a1ecfd198122
Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.00 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p3 label: N/A
uuid: b02c7e05-f919-41c9-abd6-1700a9c0cca3
Unmounted: ID-1: /dev/nvme0n1p2 size: 16.0 MiB fs: <superuser/root required> label: N/A uuid: N/A
ID-2: /dev/nvme0n1p4 size: 29.50 GiB fs: ntfs label: N/A uuid: EABEB95DBEB922CD
ID-3: /dev/nvme0n1p5 size: 505.0 MiB fs: ntfs label: N/A uuid: 40AAD50FAAD501F8
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 1-2:2 info: Lenovo Lenovo 300 Wireless Compact Mouse type: Mouse driver: hid-generic,usbhid
interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 17ef:60ac
Device-2: 1-6:3 info: Chicony Integrated Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0
speed: 480 Mb/s chip ID: 04f2:b61e serial: <filter>
Device-3: 1-7:4 info: Shenzhen Goodix Fingerprint Reader type: <vendor specific> driver: N/A interfaces: 1
rev: 2.0 speed: 480 Mb/s chip ID: 27c6:55b4
Device-4: 1-10:5 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 8087:0aaa
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.1 speed: 10 Gb/s chip ID: 1d6b:0003
Sensors: System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 247 Uptime: 5h 35m Init: systemd v: 246 Compilers: gcc: 10.2.0 alt: 9 Packages: 1589 pacman: 1584
lib: 470 flatpak: 5 Shell: Zsh v: 5.8 running in: konsole inxi: 3.1.05
again:
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 36043 / 55% / -15,58 dB, front-right: 36043 / 55% / -15,58 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX8070 Analog"
alsa.id = "CX8070 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0x9431c000 irq 148"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9dc8"
device.product.name = "Cannon Point-LP High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "384000"
device.buffering.fragment_size = "192000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Conexant CX8070"
alsa.components = "HDA:14f11f86,17aa3811,00100100 HDA:8086280b,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
active port: <analog-output-speaker>
Alarg
September 8, 2020, 3:06pm
8
After the new stable update pushed out, everything seems to be working fine. Either way, weird. Update your rolling release distro lmao
Thanks for your help, everyone!
1 Like
BG405
September 8, 2020, 4:56pm
9
It’s easy to overlook that, but yes, things do break sometimes only to be fixed with a subsequent update. Really pleased it’s working for you now.
1 Like
The update did not fix things for me.
inxi --full --admin --verbosity=7 --filter --no-host
System: Kernel: 5.7.19-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.7-x86_64 root=UUID=b841b317-5f27-4086-9390-595dff39a5c8
rw quiet apparmor=1 security=apparmor udev.log_priority=3
Desktop: KDE Plasma 5.19.5 tk: Qt 5.15.0 wm: kwin_x11 dm: SDDM Distro: Manjaro Linux
Machine: Type: Desktop Mobo: Micro-Star model: Z390-A PRO (MS-7B98) v: 1.0 serial: <filter>
UEFI: American Megatrends v: 1.80 date: 12/25/2019
Memory: RAM: total: 15.58 GiB used: 2.98 GiB (19.1%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: 6-Core model: Intel Core i5-9600K bits: 64 type: MCP arch: Kaby Lake family: 6
model-id: 9E (158) stepping: C (12) microcode: D6 L2 cache: 9216 KiB bogomips: 44412
Speed: 800 MHz min/max: 800/4700 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 5: 800
6: 800
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de
ds_cpl dtes64 dtherm dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr
hle ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single
lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe
pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand rdseed rdtscp
rep_good rtm sdbg sep smap smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2
tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec
xsaveopt xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT disabled
Graphics: Device-1: NVIDIA TU106 [GeForce RTX 2070] driver: nvidia v: 450.66
alternate: nouveau,nvidia_drm bus ID: 01:00.0 chip ID: 10de:1f02
Display: x11 server: X.Org 1.20.8 compositor: kwin_x11 driver: nvidia display ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 81 s-size: 602x343mm (23.7x13.5") s-diag: 693mm (27.3")
Monitor-1: DP-0 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2") diag: 686mm (27")
OpenGL: renderer: GeForce RTX 2070/PCIe/SSE2 v: 4.6.0 NVIDIA 450.66 direct render: Yes
Audio: Device-1: Intel Cannon Lake PCH cAVS vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
alternate: snd_soc_skl,snd_sof_pci bus ID: 00:1f.3 chip ID: 8086:a348
Device-2: NVIDIA TU106 High Definition Audio driver: snd_hda_intel v: kernel bus ID: 01:00.1
chip ID: 10de:10f9
Device-3: Logitech type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.3:4 chip ID: 046d:085b
serial: <filter>
Sound Server: ALSA v: k5.7.19-2-MANJARO
Network: Device-1: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e v: 3.2.6-k port: efa0
bus ID: 00:1f.6 chip ID: 8086:15bc
IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: ovpntun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> virtual: stable-privacy scope: link
WAN IP: <filter>
Drives: Local Storage: total: 912.89 GiB used: 81.73 GiB (9.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda vendor: Samsung model: SSD 840 EVO 500GB size: 465.76 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: DB6Q scheme: GPT
ID-2: /dev/sdb vendor: Kingston model: SA400S37480G size: 447.13 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 0102 scheme: GPT
Message: No Optical or Floppy data was found.
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 154.16 GiB size: 150.74 GiB (97.78%) used: 81.69 GiB (54.2%) fs: ext4
dev: /dev/sdb1 label: N/A uuid: b841b317-5f27-4086-9390-595dff39a5c8
ID-2: /boot/efi raw size: 100.0 MiB size: 96.0 MiB (96.00%) used: 35.0 MiB (36.5%) fs: vfat
dev: /dev/sda2 label: N/A uuid: 3E6D-7A34
Swap: Alert: No Swap data was found.
Unmounted: ID-1: /dev/sda1 size: 499.0 MiB fs: ntfs label: Recupera\xc3\xa7\xc3\xa3o
uuid: 6C326B69326B36EC
ID-2: /dev/sda3 size: 16.0 MiB fs: <superuser/root required> label: N/A uuid: N/A
ID-3: /dev/sda4 size: 379.86 GiB fs: ntfs label: N/A uuid: DE0A70890A706107
ID-4: /dev/sda5 size: 477.0 MiB fs: ext4 label: N/A uuid: 8058d62b-c13b-4508-b305-df7f16dcc3c1
ID-5: /dev/sda6 size: 84.83 GiB fs: ext4 label: N/A uuid: 81074b3c-60da-40ea-b821-aaea2cdaaaac
ID-6: /dev/sdb2 size: 292.97 GiB fs: ntfs label: Novo volume uuid: AC2AA6782AA63EE8
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub: 1-1:2 info: Genesys Logic Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610
Device-1: 1-1.3:4 info: Logitech type: Video,Audio driver: snd-usb-audio,uvcvideo
interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 046d:085b serial: <filter>
Device-2: 1-1.4:6 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: Bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0a12:0001
Device-3: 1-9:3 info: Kingston HX-KB4BL1-US [HYPERX Alloy FPS Pro] type: Keyboard,Mouse,HID
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 0951:16d2
Device-4: 1-10:5 info: Kingsis ZOWIE Gaming mouse type: Mouse driver: hid-generic,usbhid
interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 3057:0001
Hub: 2-0:1 info: Full speed (or root) Hub ports: 10 rev: 3.1 speed: 10 Gb/s chip ID: 1d6b:0003
Hub: 2-1:2 info: Genesys Logic hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0616
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s chip ID: 1d6b:0003
Sensors: System Temperatures: cpu: 35.0 C mobo: N/A gpu: nvidia temp: 32 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 45%
Info: Processes: 225 Uptime: 44m Init: systemd v: 246 Compilers: gcc: 10.2.0 alt: 8/9 Packages: 1460
pacman: 1458 lib: 406 flatpak: 0 snap: 2 Shell: Bash v: 5.0.18 running in: konsole
inxi: 3.1.05
and
pacmd list-sinks
index: 0#0 ”#0 ”
analog-output-headphones: Fones de ouvido (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-lineout>
BG405
September 8, 2020, 7:21pm
11
Hi, your question definitely deserves its own topic, as your issue might be different and your machine certainly is.
system
September 11, 2020, 7:21pm
12
This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.
Cheers!