Olli
28 August 2022 05:42
2
hello xlord,
i read only “acer and hdmi” and already recognized that you’re not running nvidia in permanent and for this reason it does not work. that said from an acer-predator user that had the same issue. but before please give us the following basic informations. post the output of
inxi --admin --verbosity=7 --filter --no-host --width
and
echo $XDG_SESSION_TYPE
and
glxinfo | egrep -i server
if the app “glxinfo” is not installed install the package “mesa-utils” to run the command
and use the described formatting rules of the forum that are described below, otherwise it’s a pain to struggle with
Welcome to Manjaro!
Please read this:
[HowTo] Provide System Information
and press the three dots … below your post and press the to give us more information so we can see what’s really going on.
Now we know the symptom of the disease, but we need some more probing to know where the origin lies…
An inxi --admin --verbosity=7 --filter --no-host --width
would be the minimum required information for us to be able to help you. (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
Also, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text .
1 Like
Hello again !
During this time, I really didn’t have the motivation to reinstall Manjaro because I have installed it more than 170 times and I had to delete it because I didn’t get the result, but when you love something, you have no choice but to retest! :))
These are the intended outputs
inxi --admin --verbosity=7 --filter --no-host --width
System:
Kernel: 5.15.60-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.1.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=db97918b-d36e-43cb-9d9e-2a6895d261cf rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME v: 42.4 tk: GTK v: 3.24.34 wm: gnome-shell dm: GDM v: 42.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Acer product: Aspire VN7-592G v: V1.12
serial: <superuser required>
Mobo: Acer model: Aspire VN7-592G v: V1.12 serial: <superuser required>
UEFI: Insyde v: 1.12 date: 10/06/2016
Battery:
ID-1: BAT0 charge: 33.6 Wh (100.0%) condition: 33.6/52.5 Wh (64.1%)
volts: 12.6 min: 11.4 model: LGC AC14A8L type: Li-ion serial: <filter>
status: not charging
Memory:
RAM: total: 15.49 GiB used: 1.91 GiB (12.3%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: Intel Core i7-6700HQ bits: 64 type: MT MCP arch: Skylake-S
gen: core 6 level: v3 built: 2015 process: Intel 14nm family: 6
model-id: 0x5E (94) stepping: 3 microcode: 0xF0
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 805 high: 843 min/max: 800/3500 scaling:
driver: intel_pstate governor: powersave cores: 1: 800 2: 800 3: 800 4: 800
5: 800 6: 800 7: 800 8: 843 bogomips: 41621
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida
intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor
movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp
rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi
vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 530 vendor: Acer Incorporated ALI driver: i915
v: kernel arch: Gen-9 process: Intel 14n built: 2015-16 ports: active: eDP-1
empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:191b
class-ID: 0300
Device-2: NVIDIA GM107M [GeForce GTX 960M] vendor: Acer Incorporated ALI
driver: nvidia v: 515.65.01 alternate: nouveau,nvidia_drm non-free: 515.xx+
status: current (as of 2022-08) arch: Maxwell code: GMxxx
process: TSMC 28nm built: 2014-19 pcie: gen: 1 speed: 2.5 GT/s lanes: 16
link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 10de:139b
class-ID: 0302
Device-3: Chicony HD WebCam type: USB driver: uvcvideo bus-ID: 1-9:3
chip-ID: 04f2:b520 class-ID: 0e02
Display: x11 server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.3
compositor: gnome-shell driver: X: loaded: modesetting,nvidia
alternate: fbdev,nouveau,nv,vesa gpu: i915 display-ID: :1 screens: 1
Screen-1: 0 s-res: 1920x1080 s-size: <missing: xdpyinfo>
Monitor-1: eDP-1 model: LG Display 0x046f built: 2014 res: 1920x1080
hz: 60 dpi: 141 gamma: 1.2 size: 345x194mm (13.58x7.64") diag: 396mm (15.6")
ratio: 16:9 modes: 1920x1080
OpenGL: renderer: Mesa Intel HD Graphics 530 (SKL GT2) v: 4.6 Mesa 22.1.6
direct render: Yes
Audio:
Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Acer
Incorporated ALI driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
chip-ID: 8086:a170 class-ID: 0401
Sound Server-1: ALSA v: k5.15.60-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.1 running: yes
Sound Server-4: PipeWire v: 0.3.56 running: yes
Network:
Device-1: Qualcomm Atheros AR9462 Wireless Network Adapter vendor: Lite-On
driver: ath9k v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
bus-ID: 06:00.0 chip-ID: 168c:0034 class-ID: 0280
IF: wlp6s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Acer Incorporated ALI driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 07:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp7s0 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Lite-On Atheros AR3012 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 1-7:2 chip-ID: 04ca:300d class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.82 TiB used: 11.27 GiB (0.6%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 type: SSD serial: <filter> rev: 2B4QFXO7 temp: 35.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ02ABD100H
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 5400 serial: <filter> rev: 5A scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 48.44 GiB size: 47.38 GiB (97.81%) used: 11.27 GiB (23.8%)
fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: db97918b-d36e-43cb-9d9e-2a6895d261cf
ID-2: /boot/efi raw-size: 400 MiB size: 399.2 MiB (99.80%) used: 312 KiB
(0.1%) fs: vfat dev: /dev/sda2 maj-min: 8:2 label: NO_LABEL
uuid: 1354-8D11
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 100 MiB fs: vfat label: N/A
uuid: 763F-98C1
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 837.66 GiB fs: ntfs label: N/A
uuid: 9C744DBA744D9842
ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 604 MiB fs: ntfs label: N/A
uuid: 00FA566AFA565BCA
ID-5: /dev/sda1 maj-min: 8:1 size: 882.68 GiB fs: ntfs label: N/A
uuid: 3C34B5F734B5B46C
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-7:2 info: Lite-On Atheros AR3012 Bluetooth type: Bluetooth
driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA
chip-ID: 04ca:300d class-ID: e001
Device-2: 1-9:3 info: Chicony HD WebCam type: Video driver: uvcvideo
interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b520
class-ID: 0e02
Device-3: 1-10:4 info: Realtek RTS5129 Card Reader Controller
type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129
class-ID: ff00 serial: <filter>
Hub-2: 2-0:1 info: Super-speed hub ports: 8 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 40.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 272 Uptime: 3m wakeups: 1 Init: systemd v: 251 default: graphical
tool: systemctl Compilers: gcc: 12.1.1 clang: 14.0.6 Packages: pm: pacman
pkgs: 1186 libs: 294 tools: gnome-software,pamac pm: flatpak pkgs: 0
Shell: Zsh v: 5.9 running-in: gnome-terminal inxi: 3.3.21
echo $XDG_SESSION_TYPE
x11
glxinfo | egrep -i server
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
Please put me out of this despair Thank you
Olli
1 September 2022 03:47
4
the intel-driver cannot access the hdmi-port. first install “optimus-manager” from package-manager. DO NOT SWITCH ANYTHING ! Just install it and post the output of
systemctl status optimus-manager
after this step we can proceed to switch but this step by step. give a reply
xlordx
1 September 2022 06:09
6
here you are
```
Loaded: loaded (/usr/lib/systemd/system/optimus-manager.service; enabled; preset: disabled)
Active: active (running) since Thu 2022-09-01 09:50:34 +0430; 1min 28s ago
Process: 519 ExecStartPre=/usr/bin/python3 -u -m optimus_manager.hooks.pre_daemon_start (code=exited, status=0/SUCCESS)
Process: 636 ExecStartPre=/usr/bin/python3 -u -m optimus_manager.hooks.pre_xorg_start (code=exited, status=0/SUCCESS)
Main PID: 648 (python3)
Tasks: 1 (limit: 19003)
Memory: 14.8M
CPU: 376ms
CGroup: /system.slice/optimus-manager.service
└─648 /usr/bin/python3 -u -m optimus_manager.daemon
Sep 01 09:50:34 lord python3[636]: [75] INFO: Unloading modules [‘nvidia_drm’, ‘nvidia_modeset’, ‘nvidia_uvm’, ‘nvidia’] (if loaded)
Sep 01 09:50:34 lord python3[636]: [80] INFO: switching=none, nothing to do
Sep 01 09:50:34 lord python3[636]: [133] INFO: Found MHWD-generated Xorg config file at /etc/X11/xorg.conf.d/90-mhwd.conf. Removing.
Sep 01 09:50:34 lord python3[636]: [133] INFO: Writing to /etc/X11/xorg.conf.d/10-optimus-manager.conf
Sep 01 09:50:34 lord python3[636]: [133] INFO: Writing state {‘type’: ‘pending_post_xorg_start’, ‘switch_id’: ‘20220901T095034’, ‘requested_mode’: ‘integrated’}
Sep 01 09:50:34 lord python3[636]: [133] INFO: Xorg pre-start hook completed successfully.
Sep 01 09:50:34 lord systemd[1]: Started Optimus Manager Commands Daemon.
Sep 01 09:50:34 lord python3[648]: [1] INFO: # Commands daemon
Sep 01 09:50:34 lord python3[648]: [1] INFO: Opening UNIX socket
Sep 01 09:50:34 lord python3[648]: [1] INFO: Awaiting commands
xlordx
2 September 2022 07:32
7
Friends, do you have any comments regarding this problem?
Olli
2 September 2022 07:39
8
edit GRUB_CMDLINE_LINUX_DEFAULT=" with sudo
and add the following to the existing entries
optimus-manager.startup=nvidia nvidia_drm.modeset=1
sudo update-grub
sudo mkinitcpio -P
after reboot
sudo systemctl enable nvidia-persistenced
1 Like
xlordx
2 September 2022 07:53
9
So I did this and what is the next step?
xlordx
2 September 2022 08:15
11
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
server glx extensions:
Olli
2 September 2022 08:16
12
okay that’s fine, nvidia is active. post the output of
xrandr | grep connect
and
inxi -Fza | grep Monitor
xlordx
2 September 2022 08:17
13
eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 345mm x 194mm
DP-1-1 disconnected (normal left inverted right x axis y axis)
HDMI-1-1 disconnected (normal left inverted right x axis y axis)
DP-1-2 disconnected (normal left inverted right x axis y axis)
HDMI-1-2 disconnected (normal left inverted right x axis y axis)
onitor-1: eDP-1 mapped: eDP-1-1 model: LG Display 0x046f built: 2014
Olli
2 September 2022 08:18
14
and your external monitor ? from here it is not physical attached and turned off
xlordx
2 September 2022 08:20
15
After connecting the monitor to the laptop, the monitor remains off and does not turn on.
Olli
2 September 2022 08:21
16
turn it on, go to system settings → display and activate the display
xlordx
2 September 2022 08:23
17
The monitor is on, but no monitor is displayed in the settings!
Olli
2 September 2022 08:26
18
leave the external on, try a reboot and check again. to be honest from here it is just a question of the system settings ! your external display is working. there is only one possibilty that the hdmi-cable wouldn’t match the hardware-version, but that is rare.
xlordx
2 September 2022 08:29
19
I have repeated this but it didn’t work even after restarting the system!
When I try Windows with the same cable, Mintor turns on and shows the image!
In addition to the monitor, the system microphone also does not work and was not recognized!
Olli
2 September 2022 08:38
20
check your system settings !!!
xlordx
2 September 2022 08:42
21
I’m sorry, but I don’t understand what you mean by settings! In the screen settings, when the second monitor is not specified, no settings are displayed for it! On the Ubuntu operating system, when the system boots, the monitor turns on for only a few seconds and the system logs are displayed, and then nothing is displayed again like now.
For the microphone issue I suggest you start a new topic in Support > Sound category and post more information about audio devices detected in ALSA
--sudo alsa-info.sh --upload