Ok,
I’ve stopped trying to be smart and went on install stock manjaro, just clicking next, next, continue. Only setting up LUKS partition encryption.
I booted into the machine, see SDDM login (i.e. graphics are working), enter my password…and then the whole system gets stuck on loading bar. Not really sure what can I do about it.
Hey, this can probably be fixed, but to help you (or help yourself) some more info in required. A starting point is this post: How to provide good information
Can you post the partitioning ?
The issue appears to resolve itself on second boot. Which is great. Anyhow to fill in the required data:
partitioning:
[nmiculinic@atlas ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
nvme0n1 259:0 0 953,9G 0 disk
├─nvme0n1p1 259:1 0 5G 0 part /boot/efi
├─nvme0n1p2 259:2 0 300G 0 part
│ └─luks-e4dc2010-467e-4b24-89c7-00f6be12d428 254:0 0 300G 0 crypt /
├─nvme0n1p3 259:3 0 16M 0 part
└─nvme0n1p4 259:4 0 648,9G 0 part
System:
Kernel: 5.10.36-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=9ffa1fca-9f13-4de2-84e9-b4a563a13a88 rw quiet
cryptdevice=UUID=e4dc2010-467e-4b24-89c7-00f6be12d428:luks-e4dc2010-467e-4b24-89c7-00f6be12d428
root=/dev/mapper/luks-e4dc2010-467e-4b24-89c7-00f6be12d428 apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma 5.21.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: ROG MAXIMUS XI EXTREME v: Rev 1.xx
serial: <filter> UEFI: American Megatrends v: 1302 date: 09/02/2019
Battery:
Device-1: hidpp_battery_0
model: Logitech MX Vertical Advanced Ergonomic Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: Discharging
Memory:
RAM: total: 31.28 GiB used: 2.29 GiB (7.3%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 8-Core model: Intel Core i9-9900K bits: 64 type: MT MCP
arch: Kaby Lake note: check family: 6 model-id: 9E (158) stepping: D (13)
microcode: DE cache: L2: 16 MiB bogomips: 115232
Speed: 800 MHz min/max: 800/5000 MHz Core speeds (MHz): 1: 800 2: 800 3: 800
4: 800 5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 13: 800
14: 800 15: 800 16: 800
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities
arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc
cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms
est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ibrs_enhanced ida intel_pt invpcid
invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr
nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni
popcnt pse pse36 pts rdrand rdseed rdtscp rep_good sdbg sep smap smep smx ss
ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec
xsaveopt xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds mitigation: TSX disabled
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: NVIDIA TU104 [GeForce RTX 2080 SUPER] vendor: Micro-Star MSI
driver: nouveau v: kernel bus-ID: 01:00.0 chip-ID: 10de:1e81 class-ID: 0300
Device-2: Huawei HiCamera type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-3.4:11 chip-ID: 12d1:4321 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver:
loaded: modesetting,nouveau alternate: fbdev,nv,vesa display-ID: :0
screens: 1
Screen-1: 0 s-res: 3440x1440 s-dpi: 96 s-size: 910x381mm (35.8x15.0")
s-diag: 987mm (38.8")
Monitor-1: DP-3 res: 3440x1440 hz: 60 dpi: 109 size: 800x335mm (31.5x13.2")
diag: 867mm (34.1")
OpenGL: renderer: NV164 v: 4.3 Mesa 21.0.3 direct render: Yes
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci bus-ID: 00:1f.3
chip-ID: 8086:a348 class-ID: 0403
Device-2: NVIDIA TU104 HD Audio vendor: Micro-Star MSI driver: snd_hda_intel
v: kernel bus-ID: 01:00.1 chip-ID: 10de:10f8 class-ID: 0403
Device-3: RODE Microphones RODE NT-USB type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-3.3:10 chip-ID: 19f7:0003
class-ID: 0300
Device-4: Huawei HiCamera type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-3.4:11 chip-ID: 12d1:4321 class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.10.36-2-MANJARO running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: yes
Sound Server-4: PipeWire v: 0.3.28 running: no
Network:
Device-1: Intel Wireless-AC 9560 [Jefferson Peak] driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280
IF: wlo1 state: down mac: <filter>
Device-2: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel
port: efa0 bus-ID: 00:1f.6 chip-ID: 8086:15bc class-ID: 0200
IF: eno2 state: down mac: <filter>
Device-3: Aquantia AQC111 NBase-T/IEEE 802.3bz Ethernet [AQtion]
vendor: ASUSTeK driver: atlantic v: kernel port: 3000 bus-ID: 04:00.0
chip-ID: 1d6a:11b1 class-ID: 0200
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB
driver: btusb v: 0.8 bus-ID: 1-14:6 chip-ID: 8087:0aaa class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
Device-1: luks-e4dc2010-467e-4b24-89c7-00f6be12d428 maj-min: 254:0
type: LUKS dm: dm-0 size: 300 GiB
Components:
p-1: nvme0n1p2 maj-min: 259:2 size: 300 GiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 953.87 GiB used: 9.03 GiB (0.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 PRO 1TB
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 rotation: SSD serial: <filter> rev: 1B2QEXP7 temp: 38.9 C
scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 300 GiB size: 294.23 GiB (98.08%) used: 8.87 GiB (3.0%)
fs: ext4 dev: /dev/dm-0 maj-min: 254:0
mapped: luks-e4dc2010-467e-4b24-89c7-00f6be12d428 label: N/A
uuid: 9ffa1fca-9f13-4de2-84e9-b4a563a13a88
ID-2: /boot/efi raw-size: 5 GiB size: 4.99 GiB (99.80%)
used: 165.7 MiB (3.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
label: N/A uuid: 501B-DA92
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p3 maj-min: 259:3 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/nvme0n1p4 maj-min: 259:4 size: 648.85 GiB fs: ntfs label: N/A
uuid: 6AFEFC54FEFC1A51
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-2:2 info: ASMedia ASM1074 High-Speed hub ports: 4 rev: 2.1
speed: 480 Mb/s power: 100mA chip-ID: 174c:2074 class-ID: 0900
Hub-3: 1-3:3 info: Texas Instruments ports: 6 rev: 2.1 speed: 480 Mb/s
chip-ID: 0451:8442 class-ID: 0900
Device-1: 1-3.1:9 info: Alcor Micro Keyboard type: Keyboard,HID
driver: maltron,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 50mA
chip-ID: 058f:9410 class-ID: 0300
Device-2: 1-3.2:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
power: 98mA chip-ID: 046d:c52b class-ID: 0300
Device-3: 1-3.3:10 info: RODE Microphones RODE NT-USB type: Audio,HID
driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1
speed: 12 Mb/s power: 100mA chip-ID: 19f7:0003 class-ID: 0300
Device-4: 1-3.4:11 info: Huawei HiCamera type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 2mA chip-ID: 12d1:4321 class-ID: 0102 serial: <filter>
Device-5: 1-3.5:7 info: Texas Instruments type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s
chip-ID: 0451:82ff class-ID: 0300 serial: <filter>
Hub-4: 1-13:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 05e3:0610 class-ID: 0900
Device-1: 1-13.3:8 info: ASUSTek AURA LED Controller type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 0b05:1872 class-ID: 0300 serial: <filter>
Device-2: 1-14:6 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP)
type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 8087:0aaa class-ID: e001
Hub-5: 2-0:1 info: Full speed (or root) Hub ports: 10 rev: 3.1
speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900
Hub-6: 2-2:2 info: ASMedia ASM1074 SuperSpeed hub ports: 4 rev: 3.0
speed: 5 Gb/s power: 8mA chip-ID: 174c:3074 class-ID: 0900
Hub-7: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-8: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-9: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-10: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 27.8 C mobo: N/A gpu: nouveau temp: 31.0 C
Fan Speeds (RPM): N/A gpu: nouveau fan: 760
Info:
Processes: 372 Uptime: 12m wakeups: 2 Init: systemd v: 247 tool: systemctl
Compilers: gcc: 10.2.0 Packages: pacman: 1212 lib: 330 flatpak: 0
Shell: Bash v: 5.1.8 running-in: yakuake inxi: 3.3.04
(manjaro log helper)
https://paste.ubuntu.com/p/mjfR6qbFQQ/
If you see some potential issue that’d be great
Hi,
One option to check is if the nvidia drivers produce the same issue after install , the nouveau drivers are open source, the nvidia are closed. For nvidia cards my experience is that this matters and running one or the other can greatly improve your experience depending on the specific hardware one is running. See the manjaro wiki for guidance on installing the drivers on a running system.
If installing again is your preferred option to check, booting with propriety drivers enabled would be the same albeit more lengthy process. iirc this forces the installation of the propriety drivers during installation but is has been a while since I installed on hardware.
I’m not using nvidia drivers since I’m connected via Display Port…and in latest updates they borked DP support, causing me to have to reinstall everything.