Hi,
yesterday I installed Manjaro xfce and I noticed that ethernet connection works only if I reboot the pc. I’d like to solve this problem and make the ethernet adapter works also on first turn on ('cause having to reboot every time is very annoying). Hope you can help me. Bye!
Hi @jamalito ,
Welcome to the forum, I wonder whether you are able to provide any additional information about your system. Please, read the following post:
‘[HowTo] Provide System Information’
Maybe, you can post the output of the following terminal command:
inxi --admin --verbosity=7 --filter --width
Regards,
Hi @j8a ,
here the outputs.
On the first startup (when ethernet connection doesn’t work):
System:
Kernel: 6.1.22-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
root=UUID=1e460060-1a1b-4829-a662-b70c4a4c8f2f rw quiet splash
udev.log_priority=3
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: M52AD_M12AD_A_F_K31AD v: Rev X.0x
serial: <superuser required> BIOS: American Megatrends v: 0501
date: 12/04/2014
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 7.7 GiB used: 756.1 MiB (9.6%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i3-4160 bits: 64 type: MT MCP arch: Haswell
gen: core 4 level: v3 note: check built: 2013-15 process: Intel 22nm
family: 6 model-id: 0x3C (60) stepping: 3 microcode: 0x28
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 800 min/max: 800/3600 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 28745
Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2
bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts epb erms est f16c flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs
invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe msr
mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good sdbg sep smep ss
ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tsc tsc_adjust
tsc_deadline_timer vme xsave xsaveopt xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GK208 [GeForce GT 720] vendor: ASUSTeK driver: nvidia
v: 470.182.03 alternate: nouveau,nvidia_drm non-free: series: 470.xx+
status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx
process: TSMC 28nm built: 2012-18 pcie: gen: 1 speed: 2.5 GT/s lanes: 4
link-max: gen: 2 speed: 5 GT/s lanes: 8 bus-ID: 01:00.0 chip-ID: 10de:1286
class-ID: 0300
Display: x11 server: X.Org v: 21.1.8 compositor: xfwm v: 4.18.0 driver: X:
loaded: nvidia gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 101 s-size: 483x272mm (19.02x10.71")
s-diag: 554mm (21.82")
Monitor-1: VGA-0 res: 1920x1080 hz: 60 dpi: 102
size: 477x268mm (18.78x10.55") diag: 547mm (21.54") modes: N/A
API: OpenGL Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
class-ID: 0403
Device-2: NVIDIA GK208 HDMI/DP Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 4 link-max: gen: 2
speed: 5 GT/s lanes: 8 bus-ID: 01:00.1 chip-ID: 10de:0e0f class-ID: 0403
API: ALSA v: k6.1.22-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.67 status: off tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel Ethernet I217-V vendor: ASUSTeK driver: N/A modules: e1000e
port: f040 bus-ID: 00:19.0 chip-ID: 8086:153b class-ID: 0200
WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 931.51 GiB used: 33.16 GiB (3.6%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10EZEX-22BN5A0
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: 1A01 scheme: MBR
Optical-1: /dev/sr0 vendor: ASUS DVD model: RAM GHC1N rev: AS00
dev-links: cdrom
Features: speed: 12 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 931.51 GiB size: 915.81 GiB (98.31%) used: 33.16 GiB (3.6%)
fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A
uuid: 1e460060-1a1b-4829-a662-b70c4a4c8f2f
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:8008 class-ID: 0900
Hub-3: 2-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:8000 class-ID: 0900
Hub-5: 3-0:1 info: Hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-3:2 info: Darfon Optical Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
power: 100mA chip-ID: 0d62:a100 class-ID: 0301
Device-2: 3-4:3 info: Primax USB Wired Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s
power: 100mA chip-ID: 0461:4dbf class-ID: 0300
Device-3: 3-8:4 info: Realtek USB 2.0 multicard reader type: Mass Storage
driver: ums-realtek interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 0bda:0158 class-ID: 0806 serial: <filter>
Hub-6: 4-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 26.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 167 Uptime: 6m wakeups: 0 Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
pkgs: 980 libs: 313 tools: pamac Shell: Bash v: 5.1.16
running-in: xfce4-terminal inxi: 3.3.26
And after reboot (when ethernet connection works):
System:
Kernel: 6.1.22-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
root=UUID=1e460060-1a1b-4829-a662-b70c4a4c8f2f rw quiet splash
udev.log_priority=3
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: M52AD_M12AD_A_F_K31AD v: Rev X.0x
serial: <superuser required> BIOS: American Megatrends v: 0501
date: 12/04/2014
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 7.72 GiB used: 773.4 MiB (9.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i3-4160 bits: 64 type: MT MCP arch: Haswell
gen: core 4 level: v3 note: check built: 2013-15 process: Intel 22nm
family: 6 model-id: 0x3C (60) stepping: 3 microcode: 0x28
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1500 high: 3600 min/max: 800/3600 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 3600 2: 800 3: 800 4: 800
bogomips: 28745
Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2
bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts epb erms est f16c flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs
invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe msr
mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good sdbg sep smep ss
ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tsc tsc_adjust
tsc_deadline_timer vme xsave xsaveopt xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GK208 [GeForce GT 720] vendor: ASUSTeK driver: nvidia
v: 470.182.03 alternate: nouveau,nvidia_drm non-free: series: 470.xx+
status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx
process: TSMC 28nm built: 2012-18 pcie: gen: 2 speed: 5 GT/s lanes: 4
link-max: lanes: 8 bus-ID: 01:00.0 chip-ID: 10de:1286 class-ID: 0300
Display: x11 server: X.Org v: 21.1.8 compositor: xfwm v: 4.18.0 driver: X:
loaded: nvidia gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 101 s-size: 483x272mm (19.02x10.71")
s-diag: 554mm (21.82")
Monitor-1: VGA-0 res: 1920x1080 hz: 60 dpi: 102
size: 477x268mm (18.78x10.55") diag: 547mm (21.54") modes: N/A
API: OpenGL Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
class-ID: 0403
Device-2: NVIDIA GK208 HDMI/DP Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 4 link-max: lanes: 8
bus-ID: 01:00.1 chip-ID: 10de:0e0f class-ID: 0403
API: ALSA v: k6.1.22-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.67 status: off tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel Ethernet I217-V vendor: ASUSTeK driver: e1000e v: kernel
port: f040 bus-ID: 00:19.0 chip-ID: 8086:153b class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 931.51 GiB used: 33.16 GiB (3.6%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10EZEX-22BN5A0
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: 1A01 scheme: MBR
Optical-1: /dev/sr0 vendor: ASUS DVD model: RAM GHC1N rev: AS00
dev-links: cdrom
Features: speed: 12 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 931.51 GiB size: 915.81 GiB (98.31%) used: 33.16 GiB (3.6%)
fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A
uuid: 1e460060-1a1b-4829-a662-b70c4a4c8f2f
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:8008 class-ID: 0900
Hub-3: 2-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:8000 class-ID: 0900
Hub-5: 3-0:1 info: Hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-3:2 info: Darfon Optical Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
power: 100mA chip-ID: 0d62:a100 class-ID: 0301
Device-2: 3-4:3 info: Primax USB Wired Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s
power: 100mA chip-ID: 0461:4dbf class-ID: 0300
Device-3: 3-8:4 info: Realtek USB 2.0 multicard reader type: Mass Storage
driver: ums-realtek interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 0bda:0158 class-ID: 0806 serial: <filter>
Hub-6: 4-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 28.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 170 Uptime: 8m wakeups: 0 Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
pkgs: 980 libs: 313 tools: pamac Shell: Bash v: 5.1.16
running-in: xfce4-terminal inxi: 3.3.26
Hope you can help me, thanks!!!
The driver doesn’t seem to be loaded in the first case (when it doesn’t work), driver is e1000e as I can see.
You can confirm this with
lsmod | grep e1000e # it should be listed out
It’s not a solution but you can try manually forcing / loading the module via modprobe (-r variant is to unload it but probably not needed)
sudo modprobe -r e1000e
sudo modprobe e1000e
…and if it fails to load for some reason, then run in parallel in terminal the journalctl -r (or similar) at the same time as calling the modprobe
It could be that the problem is related to WoL, and the solution could be to turn of all the WoL features in the Windows Intel driver if you have a dual boot installation.
Another option could be to restart the network-manager after cold boot:
sudo service network-manager restart
Have also a look into this thread:
Hi @dragan,
I tried
sudo modprobe -r e1000e
sudo modprobe e1000e
but this not worked. The output it gaves me:
[riccarobi@riccarobi-PC ~]$ journalctl -r
apr 14 19:45:33 riccarobi-PC kernel: audit: type=1106 audit(1681494333.495:103)>
apr 14 19:45:33 riccarobi-PC kernel: e1000e: probe of 0000:00:19.0 failed with >
apr 14 19:45:33 riccarobi-PC sudo[1495]: pam_unix(sudo:session): session closed>
apr 14 19:45:33 riccarobi-PC audit[1495]: CRED_DISP pid=1495 uid=1000 auid=1000>
apr 14 19:45:33 riccarobi-PC audit[1495]: USER_END pid=1495 uid=1000 auid=1000 >
apr 14 19:45:32 riccarobi-PC kernel: e1000e 0000:00:19.0: Interrupt Throttling >
apr 14 19:45:32 riccarobi-PC kernel: e1000e: Copyright(c) 1999 - 2015 Intel Cor>
apr 14 19:45:32 riccarobi-PC kernel: e1000e: Intel(R) PRO/1000 Network Driver
apr 14 19:45:32 riccarobi-PC kernel: audit: type=1105 audit(1681494332.469:102)>
apr 14 19:45:32 riccarobi-PC kernel: audit: type=1110 audit(1681494332.469:101)>
apr 14 19:45:32 riccarobi-PC audit[1495]: USER_START pid=1495 uid=1000 auid=100>
apr 14 19:45:32 riccarobi-PC sudo[1495]: pam_unix(sudo:session): session opened>
apr 14 19:45:32 riccarobi-PC audit[1495]: CRED_REFR pid=1495 uid=1000 auid=1000>
apr 14 19:45:32 riccarobi-PC sudo[1495]: riccarobi : TTY=pts/1 ; PWD=/home/ricc>
apr 14 19:45:32 riccarobi-PC audit[1495]: USER_ACCT pid=1495 uid=1000 auid=1000>
apr 14 19:45:32 riccarobi-PC kernel: audit: type=1101 audit(1681494332.465:100)>
apr 14 19:45:32 riccarobi-PC sudo[1495]: pam_systemd_home(sudo:account): system>
apr 14 19:45:32 riccarobi-PC dbus-daemon[510]: [system] Activation via systemd >
apr 14 19:45:32 riccarobi-PC dbus-daemon[510]: [system] Activating via systemd:>
apr 14 19:45:30 riccarobi-PC kernel: audit: type=1104 audit(1681494330.325:99):>
apr 14 19:45:30 riccarobi-PC kernel: audit: type=1106 audit(1681494330.325:98):>
apr 14 19:45:30 riccarobi-PC audit[1491]: CRED_DISP pid=1491 uid=1000 auid=1000>
apr 14 19:45:30 riccarobi-PC audit[1491]: USER_END pid=1491 uid=1000 auid=1000 >
lines 1-23...skipping...
apr 14 19:45:33 riccarobi-PC kernel: audit: type=1106 audit(1681494333.495:103): pid=1495
uid=1000 auid=1000 ses=2 msg='op=PAM:session_close
grantors=pam_systemd_home,pam_limits,pam_unix,pa>
apr 14 19:45:33 riccarobi-PC kernel: e1000e: probe of 0000:00:19.0 failed with error -3
apr 14 19:45:33 riccarobi-PC sudo[1495]: pam_unix(sudo:session): session closed for user root
apr 14 19:45:33 riccarobi-PC audit[1495]: CRED_DISP pid=1495 uid=1000 auid=1000 ses=2
msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root"
exe="/usr/bin/sud>
apr 14 19:45:33 riccarobi-PC audit[1495]: USER_END pid=1495 uid=1000 auid=1000 ses=2
msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit
acct="root" exe="/usr>
apr 14 19:45:32 riccarobi-PC kernel: e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
apr 14 19:45:32 riccarobi-PC kernel: e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
apr 14 19:45:32 riccarobi-PC kernel: e1000e: Intel(R) PRO/1000 Network Driver
apr 14 19:45:32 riccarobi-PC kernel: audit: type=1105 audit(1681494332.469:102): pid=1495
uid=1000 auid=1000 ses=2 msg='op=PAM:session_open
grantors=pam_systemd_home,pam_limits,pam_unix,pam>
apr 14 19:45:32 riccarobi-PC kernel: audit: type=1110 audit(1681494332.469:101): pid=1495
uid=1000 auid=1000 ses=2 msg='op=PAM:setcred
grantors=pam_faillock,pam_permit,pam_env,pam_faillock >
apr 14 19:45:32 riccarobi-PC audit[1495]: USER_START pid=1495 uid=1000 auid=1000 ses=2
msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit
acct="root" exe="/us>
apr 14 19:45:32 riccarobi-PC sudo[1495]: pam_unix(sudo:session): session opened for user
root(uid=0) by (uid=1000)
apr 14 19:45:32 riccarobi-PC audit[1495]: CRED_REFR pid=1495 uid=1000 auid=1000 ses=2
msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root"
exe="/usr/bin/sud>
apr 14 19:45:32 riccarobi-PC sudo[1495]: riccarobi : TTY=pts/1 ; PWD=/home/riccarobi ;
USER=root ; COMMAND=/usr/bin/modprobe e1000e
apr 14 19:45:32 riccarobi-PC audit[1495]: USER_ACCT pid=1495 uid=1000 auid=1000 ses=2
msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="riccarobi"
exe="/usr/bin/sudo" hostn>
apr 14 19:45:32 riccarobi-PC kernel: audit: type=1101 audit(1681494332.465:100): pid=1495
uid=1000 auid=1000 ses=2 msg='op=PAM:accounting
grantors=pam_unix,pam_permit,pam_time acct="riccaro>
apr 14 19:45:32 riccarobi-PC sudo[1495]: pam_systemd_home(sudo:account): systemd-homed
is not available: Unit dbus-org.freedesktop.home1.service not found.
apr 14 19:45:32 riccarobi-PC dbus-daemon[510]: [system] Activation via systemd failed for unit
'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
apr 14 19:45:32 riccarobi-PC dbus-daemon[510]: [system] Activating via systemd: service
name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.42'
(uid=0 pi>
apr 14 19:45:30 riccarobi-PC kernel: audit: type=1104 audit(1681494330.325:99): pid=1491
uid=1000 auid=1000 ses=2 msg='op=PAM:setcred
grantors=pam_faillock,pam_permit,pam_faillock acct="roo>
apr 14 19:45:30 riccarobi-PC kernel: audit: type=1106 audit(1681494330.325:98): pid=1491
uid=1000 auid=1000 ses=2 msg='op=PAM:session_close
grantors=pam_systemd_home,pam_limits,pam_unix,pam>
apr 14 19:45:30 riccarobi-PC audit[1491]: CRED_DISP pid=1491 uid=1000 auid=1000 ses=2
msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root"
exe="/usr/bin/sudo" hostn>
apr 14 19:45:30 riccarobi-PC audit[1491]: USER_END pid=1491 uid=1000 auid=1000 ses=2
msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit
acct="root" exe="/usr>
apr 14 19:45:30 riccarobi-PC sudo[1491]: pam_unix(sudo:session): session closed for user root
apr 14 19:45:30 riccarobi-PC kernel: audit: type=1105 audit(1681494330.299:97): pid=1491
uid=1000 auid=1000 ses=2 msg='op=PAM:session_open
grantors=pam_systemd_home,pam_limits,pam_unix,pam_>
apr 14 19:45:30 riccarobi-PC kernel: audit: type=1110 audit(1681494330.299:96): pid=1491
uid=1000 auid=1000 ses=2 msg='op=PAM:setcred
grantors=pam_faillock,pam_permit,pam_faillock acct="roo>
apr 14 19:45:30 riccarobi-PC kernel: audit: type=1101 audit(1681494330.299:95): pid=1491
uid=1000 auid=1000 ses=2 msg='op=PAM:accounting
grantors=pam_unix,pam_permit,pam_time acct="riccarob>
apr 14 19:45:30 riccarobi-PC kernel: audit: type=1100 audit(1681494330.299:94): pid=1491
uid=1000 auid=1000 ses=2 msg='op=PAM:authentication
grantors=pam_faillock,pam_permit,pam_faillock ac>
apr 14 19:45:30 riccarobi-PC sudo[1491]: pam_unix(sudo:session): session opened for user
root(uid=0) by (uid=1000)
apr 14 19:45:30 riccarobi-PC audit[1491]: USER_START pid=1491 uid=1000 auid=1000 ses=2
msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit
acct="root" exe="/us>
apr 14 19:45:30 riccarobi-PC audit[1491]: CRED_REFR pid=1491 uid=1000 auid=1000 ses=2
msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root"
exe="/usr/bin/sudo" hostn>
apr 14 19:45:30 riccarobi-PC sudo[1491]: riccarobi : TTY=pts/1 ; PWD=/home/riccarobi ;
USER=root ; COMMAND=/usr/bin/modprobe -r e1000e
apr 14 19:45:30 riccarobi-PC audit[1491]: USER_ACCT pid=1491 uid=1000 auid=1000 ses=2
msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="riccarobi"
exe="/usr/bin/sudo" hostn>
apr 14 19:45:30 riccarobi-PC audit[1491]: USER_AUTH pid=1491 uid=1000 auid=1000 ses=2
msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="riccarobi"
exe="/usr/bin>
apr 14 19:45:26 riccarobi-PC sudo[1491]: pam_systemd_home(sudo:auth): systemd-homed is
not available: Unit dbus-org.freedesktop.home1.service not found.
apr 14 19:45:26 riccarobi-PC dbus-daemon[510]: [system] Activation via systemd failed for unit
'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
apr 14 19:45:26 riccarobi-PC dbus-daemon[510]: [system] Activating via systemd: service
name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.41'
(uid=0 pi>
apr 14 19:45:07 riccarobi-PC dbus-daemon[958]: [session uid=1000 pid=958] Successfully
activated service 'org.xfce.Xfconf'
apr 14 19:45:07 riccarobi-PC dbus-daemon[958]: [session uid=1000 pid=958] Activating service
name='org.xfce.Xfconf' requested by ':1.14' (uid=1000 pid=1032 comm="xfsettingsd")
@Wollie in the thread you linked the problem is solved disabling “wake on lan” from Windows, but I’haven’t Windows anymore. Bye!
You didn’t provide the lsmod grep - there could be more modules related.
Wollie gave you a good link there, you can try and reset the pci device, or remove rescan (is hard variant of it). Find your ethernet device path (lspci etc., see the archlinux link), and send echo 1 >${PCIPATH}/remove then echo 1 >/sys/bus/pci/rescan - that hard resets the pci device. Worth a try maybe.
https://unix.stackexchange.com/questions/29775/reset-a-pci-device-in-linux