[demo@Manjaro ~]$ systemctl --user list-units
UNIT LOAD ACTIVE SUB DE>
sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2deDP\x2d1-intel_backlight.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-bluetooth-hci0-hci0:1.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-bluetooth-hci0.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:14.3-net-wlan0.device loaded active plugged Co>
sys-devices-pci0000:00-0000:00:14.3-ptp-ptp0.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-rtsx_pci_sdmmc.0-mmc_host-mmc0-mmc0:59b4-block-mmcblk0-mmcblk0p1.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-rtsx_pci_sdmmc.0-mmc_host-mmc0-mmc0:59b4-block-mmcblk0.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p1.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p10.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p11.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p12.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p13.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p2.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p3.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p4.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p5.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p6.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p7.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p8.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1-nvme0n1p9.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1d.4-0000:3c:00.0-nvme-nvme0-nvme0n1.device loaded active plugged Sa>
sys-devices-pci0000:00-0000:00:1f.3-skl_hda_dsp_generic-sound-card0-controlC0.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:1f.5-spi_master-spi0-spi0.0-mtd-mtd0-mtd1.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:1f.5-spi_master-spi0-spi0.0-mtd-mtd0-mtd1ro.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:1f.5-spi_master-spi0-spi0.0-mtd-mtd0.device loaded active plugged /s>
sys-devices-pci0000:00-0000:00:1f.5-spi_master-spi0-spi0.0-mtd-mtd0ro.device loaded active plugged /s>
sys-devices-platform-MSFT0101:00-tpm-tpm0.device loaded active plugged /s>
sys-devices-platform-MSFT0101:00-tpmrm-tpmrm0.device loaded active plugged /s>
sys-devices-platform-serial8250-serial8250:0-serial8250:0.0-tty-ttyS0.device loaded active plugged /s>
sys-devices-platform-serial8250-serial8250:0-serial8250:0.1-tty-ttyS1.device loaded active plugged /s>
sys-devices-platform-serial8250-serial8250:0-serial8250:0.2-tty-ttyS2.device loaded active plugged /s>
sys-devices-platform-serial8250-serial8250:0-serial8250:0.3-tty-ttyS3.device loaded active plugged /s>
sys-devices-virtual-misc-rfkill.device loaded active plugged /s>
sys-devices-virtual-net-tailscale0.device loaded active plugged /s>
sys-module-configfs.device loaded active plugged /s>
sys-module-fuse.device loaded active plugged /s>
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /s>
sys-subsystem-bluetooth-devices-hci0:1.device loaded active plugged /s>
sys-subsystem-net-devices-tailscale0.device loaded active plugged /s>
sys-subsystem-net-devices-wlan0.device loaded active plugged Co>
-.mount loaded active mounted Ro>
boot-efi.mount loaded active mounted /b>
dev-hugepages.mount loaded active mounted /d>
dev-mqueue.mount loaded active mounted /d>
home.mount loaded active mounted /h>
proc-sys-fs-binfmt_misc.mount loaded active mounted /p>
run-credentials-systemd\x2djournald.service.mount loaded active mounted /r>
run-credentials-systemd\x2dnetworkd.service.mount loaded active mounted /r>
run-credentials-systemd\x2dresolved.service.mount loaded active mounted /r>
run-user-1000-doc.mount loaded active mounted /r>
run-user-1000-gvfs.mount loaded active mounted /r>
run-user-1000.mount loaded active mounted /r>
sys-fs-fuse-connections.mount loaded active mounted /s>
sys-kernel-config.mount loaded active mounted /s>
sys-kernel-debug.mount loaded active mounted /s>
sys-kernel-tracing.mount loaded active mounted /s>
tmp.mount loaded active mounted /t>
pacnew-checker.path loaded active waiting "M>
app-com.vivaldi.Vivaldi-3684.scope loaded active running ap>
init.scope loaded active running Sy>
app-arch\x2dupdate\x2dtray@autostart.service loaded active running Ar>
app-geoclue\x2ddemo\x2dagent@autostart.service loaded active running Ge>
app-msm_kde_notifier@autostart.service loaded active running MS>
app-org.kde.discover.notifier@autostart.service loaded active running Di>
app-org.kde.kalendarac@autostart.service loaded active running Ca>
app-org.kde.kdeconnect.daemon@autostart.service loaded active running KD>
app-org.moson.matray@autostart.service loaded active running ma>
app-plank@autostart.service loaded active running Pl>
app-variety@autostart.service loaded active running Va>
app-xscreensaver@autostart.service loaded active running XS>
at-spi-dbus-bus.service loaded active running Ac>
bamfdaemon.service loaded active running BA>
dbus-:1.1-org.kde.kwalletd6@0.service loaded active running db>
dbus-:1.62-org.a11y.atspi.Registry@0.service loaded active running db>
dbus-broker.service loaded active running D->
dconf.service loaded active running Us>
gnome-keyring-daemon.service loaded active running GN>
gvfs-afc-volume-monitor.service loaded active running Vi>
gvfs-daemon.service loaded active running Vi>
gvfs-gphoto2-volume-monitor.service loaded active running Vi>
gvfs-mtp-volume-monitor.service loaded active running Vi>
gvfs-udisks2-volume-monitor.service loaded active running Vi>
pipewire-pulse.service loaded active running Pi>
pipewire.service loaded active running Pi>
plasma-gmenudbusmenuproxy.service loaded active running Pr>
plasma-kaccess.service loaded active running KA>
plasma-kactivitymanagerd.service loaded active running KA>
plasma-kded6.service loaded active running KD>
plasma-kglobalaccel.service loaded active running KD>
plasma-kscreen.service loaded active running KS>
plasma-ksmserver.service loaded active running KD>
plasma-kwin_x11.service loaded active running KD>
plasma-plasmashell.service loaded active running KD>
plasma-polkit-agent.service loaded active running KD>
plasma-powerdevil.service loaded active running Po>
plasma-xdg-desktop-portal-kde.service loaded active running Xd>
plasma-xembedsniproxy.service loaded active running Ha>
wireplumber.service loaded active running Mu>
xdg-desktop-portal.service loaded active running Po>
xdg-document-portal.service loaded active running fl>
xdg-permission-store.service loaded active running sa>
-.slice loaded active active Ro>
app-dbus\x2d:1.1\x2dorg.freedesktop.Notifications.slice loaded active active Sl>
app-dbus\x2d:1.1\x2dorg.kde.KSplash.slice loaded active active Sl>
app-dbus\x2d:1.1\x2dorg.kde.kwalletd6.slice loaded active active Sl>
app-dbus\x2d:1.62\x2dorg.a11y.atspi.Registry.slice loaded active active Sl>
app.slice loaded active active Us>
background.slice loaded active active Us>
session.slice loaded active active Us>
dbus.socket loaded active running D->
dirmngr.socket loaded active listening Gn>
gcr-ssh-agent.socket loaded active listening GC>
gnome-keyring-daemon.socket loaded active running GN>
gpg-agent-browser.socket loaded active listening Gn>
gpg-agent-extra.socket loaded active listening Gn>
gpg-agent-ssh.socket loaded active listening Gn>
gpg-agent.socket loaded active listening Gn>
keyboxd.socket loaded active listening Gn>
p11-kit-server.socket loaded active listening p1>
pipewire-pulse.socket loaded active running Pi>
pipewire.socket loaded active running Pi>
basic.target loaded active active Ba>
bluetooth.target loaded active active Bl>
default.target loaded active active Ma>
graphical-session-pre.target loaded active active Se>
graphical-session.target loaded active active Cu>
paths.target loaded active active Pa>
plasma-core.target loaded active active KD>
plasma-workspace-x11.target loaded active active pl>
plasma-workspace.target loaded active active KD>
sockets.target loaded active active So>
timers.target loaded active active Ti>
xdg-desktop-autostart.target loaded active active St>
arch-update.timer loaded active waiting Ru>
Legend: LOAD → Reflects whether the unit definition was properly loaded.
ACTIVE → The high-level unit activation state, i.e. generalization of SUB.
SUB → The low-level unit activation state, values depend on unit type.
134 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[demo@Manjaro ~]$
[demo@Manjaro ~]$
[demo@Manjaro ~]$
[demo@Manjaro ~]$
[demo@Manjaro ~]$ ls -lAh ~/.config/autostart/
total 36K
-rw------- 1 demo demo 188 Dec 9 2024 arch-update-tray.desktop
-rw-r--r-- 1 demo demo 155 May 17 13:01 bluetooth_device_start.desktop
-rwxr-xr-x 1 demo demo 146 Jul 19 2023 discord.desktop
-rw-r--r-- 1 demo demo 625 Oct 31 2024 io.optimus_manager.OptimusManagerQt.desktop
-rw-r--r-- 1 demo demo 190 Dec 25 2022 org.moson.matray.desktop
-rw------- 1 demo demo 159 Feb 13 2025 plank.desktop
-rw-r--r-- 1 demo demo 297 Dec 25 2022 ulauncher.desktop
-rw-r--r-- 1 demo demo 457 Mar 2 19:53 variety.desktop
-rw-r--r-- 1 demo demo 191 Feb 9 2024 xscreensaver.desktop
[demo@Manjaro ~]$ systemctl --user list-units --type=automount --type=mount
UNIT LOAD ACTIVE SUB DESCRIPTION
-.mount loaded active mounted Root Mount
boot-efi.mount loaded active mounted /boot/efi
dev-hugepages.mount loaded active mounted /dev/hugepages
dev-mqueue.mount loaded active mounted /dev/mqueue
home.mount loaded active mounted /home
proc-sys-fs-binfmt_misc.mount loaded active mounted /proc/sys/fs/binfmt_misc
run-credentials-systemd\x2djournald.service.mount loaded active mounted /run/credentials/systemd-journald.service
run-credentials-systemd\x2dnetworkd.service.mount loaded active mounted /run/credentials/systemd-networkd.service
run-credentials-systemd\x2dresolved.service.mount loaded active mounted /run/credentials/systemd-resolved.service
run-user-1000-doc.mount loaded active mounted /run/user/1000/doc
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
sys-fs-fuse-connections.mount loaded active mounted /sys/fs/fuse/connections
sys-kernel-config.mount loaded active mounted /sys/kernel/config
sys-kernel-debug.mount loaded active mounted /sys/kernel/debug
sys-kernel-tracing.mount loaded active mounted /sys/kernel/tracing
tmp.mount loaded active mounted /tmp
Legend: LOAD → Reflects whether the unit definition was properly loaded.
ACTIVE → The high-level unit activation state, i.e. generalization of SUB.
SUB → The low-level unit activation state, values depend on unit type.
17 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[demo@Manjaro ~]$
[demo@Manjaro ~]$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=385A-127E /boot/efi vfat umask=0077 0 2
UUID=45ca132d-4a37-4dc3-afa0-be2e80d6a4a2 / ext4 defaults,noatime 0 1
UUID=1f7a0eb8-f3e9-46ef-a88a-e3ae0ed0233d /home ext4 defaults,noatime 0 2
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
#UUID=1b9cd8e2-756a-4a24-9641-d3cdd3bed29a none swap sw 0 0
#/dev/sda1 /mnt/lfs ext4 defaults 1 1
[demo@Manjaro ~]$
[demo@Manjaro ~]$ systemctl list-units --type=automount --type=mount
UNIT LOAD ACTIVE SUB DESCRIPTION
home-demo-mnt-data-backup.automount loaded active waiting Automount backup partition
home-demo-mnt-server-music.automount loaded active waiting server music mount
proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
-.mount loaded active mounted Root Mount
boot-efi.mount loaded active mounted /boot/efi
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
proc-sys-fs-binfmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
run-user-1000-doc.mount loaded active mounted /run/user/1000/doc
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-config.mount loaded active mounted Kernel Configuration File System
sys-kernel-debug.mount loaded active mounted Kernel Debug File System
sys-kernel-tracing.mount loaded active mounted Kernel Trace File System
tmp.mount loaded active mounted /tmp
To answer your other questions:
When I start it from the terminal the long pause also happens and there are no messages shown.
It is an external drive that I had connected for putting backup files on.
I disconnected it when I was done. So I thought.
It keeps trying to connect to it when dolphin starts it looks like.
If I hook up the drive it works fine.
Actually after I disabled that one it then hung up the music one.
I disabled both and problem went away.
So do I need to start a new post with this problem?
I looked again I do have WantedBy=multi-user.target in there
I re enabled the music mount and the system hung up on booting this time.
Something is wonky with the systemd mount service.
Maybe my kernel is affecting this . I have been testing with rc kernel.
I will try my other kernel and see if I have the problem there also.
OK I went over my files and they seem correct to me.
I have been struggling with this all morning and can’t get anywhere.
My problem now is the system is taking 2 minutes to boot to the login screen when I activate the .automount file.
I will repost the 2 files and let me know if you see something a miss.
I don’t see any nofail option for systemd mount. It comes up when I search and get fstab examples.
[demo@Manjaro ~]$ cat /etc/systemd/system/home-demo-mnt-server-music.mount
[Unit]
Description=server music mount
[Mount]
What=//192.168.68.15/Music
Where=/home/demo/mnt/server/music
Type=cifs
Options=_netdev,rw,file_mode=0700,dir_mode=0700,uid=1000,gid=1000,iocharset=utf8
TimeoutSec=10
[Install]
WantedBy=multi-user.target
[demo@Manjaro ~]$
[demo@Manjaro ~]$ cat /etc/systemd/system/home-demo-mnt-server-music.automount
[Unit]
Description=server music mount
Requires=home-demo-mnt-server-music.mount
[Automount]
Where=/home/demo/mnt/server/music
TimeoutIdleSec=30
[Install]
WantedBy=multi-user.target
Edit:
I just noticed the automount is disconnecting itself
I have to keep starting it over and over for it to be there.
