Hello,
I’m using Manjaro with KDE Plasma. Further information about my configuration and hardware is in my profile. I have a pretty annoying issue: sometimes after waking up from standby (by opening the lid of my laptop) the login screen is completely frozen. Sometimes it shows the login background, sometimes just a black screen. More symptoms are:
- I can’t move my mouse pointer
- I can’t switch to a terminal session with Ctrl + Alt + F2/F3/F4
- When I close the lid again it does not go into standby again, the screen stays on
- When I press the power button nothing happens
The only thing I found to resolve this is to hold the power button for a few seconds to hard reset the laptop and boot again. I read about people with similar issues but did not really find a solution. Also my problem seems to be a bit different since I can’t even switch to a terminal session.
The issue does not occur every time. I suspect that it has something to do with unplugging an external display. But I failed to find a reliable way to reproduce or mitigate it. I tried unplugging the display when in standby, on login screen and while in use. It does not seem to make a difference.
Since I’m pretty new to Manjaro I don’t really know where to look for error logs for this issue and also I don’t know for what I need to search. All help is appreciated.
Regards
Joshua
Edit:
Some more information (the whole output can be found at https://paste.ubuntu.com/p/tg5RXjYdfw/ )
#################### inxi -Fxzc0 ########################
System: Kernel: 5.10.13-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1
Desktop: KDE Plasma 5.20.5 Distro: Manjaro Linux
Machine: Type: Laptop System: HUAWEI product: MACHC-WAX9 v: M1080 serial: <filter>
Mobo: HUAWEI model: MACHC-WAX9-PCB v: M1080 serial: <filter> UEFI: HUAWEI v: 1.07
date: 03/05/2020
Battery: ID-1: BAT0 charge: 55.7 Wh condition: 58.2/55.2 Wh (105%)
model: DYNAPACK HB4593R1ECW-22T status: Unknown
Device-1: hidpp_battery_1 model: Logitech Wireless Mouse MX Master
charge: 100% (should be ignored) status: Discharging
CPU: Info: Quad Core model: Intel Core i5-10210U bits: 64 type: MT MCP arch: Kaby Lake
note: check rev: C L2 cache: 6 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 33615
Speed: 800 MHz min/max: 400/4200 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800
5: 800 6: 800 7: 800 8: 800
Graphics: Device-1: Intel UHD Graphics driver: i915 v: kernel bus ID: 00:02.0
Device-2: NVIDIA GP108BM [GeForce MX250] driver: N/A bus ID: 01:00.0
Device-3: Cheng Uei Precision Industry (Foxlink) HD Camera type: USB driver: uvcvideo
bus ID: 1-7:2
Display: x11 server: X.Org 1.20.10 driver: loaded: modesetting unloaded: intel
resolution: 1: 3000x2000~60Hz 2: 2560x1440~75Hz
OpenGL: renderer: Mesa Intel UHD Graphics (CML GT2) v: 4.6 Mesa 20.3.4
direct render: Yes
Audio: Device-1: Intel driver: snd_hda_intel v: kernel bus ID: 00:1f.3
Device-2: C-Media USB Audio Device type: USB driver: hid-generic,snd-usb-audio,usbhid
bus ID: 1-2.2.2:8
Sound Server: ALSA v: k5.10.13-2-MANJARO
Network: Device-1: Intel Wireless-AC 9462 driver: iwlwifi v: kernel port: 4000 bus ID: 00:14.3
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152
bus ID: 4-1.1:4
IF: enp58s0u1u1 state: down mac: <filter>
Bluetooth: Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB driver: btusb v: 0.8
bus ID: 1-10:3
Message: Required tool hciconfig not installed. Check --recommends
Drives: Local Storage: total: 476.94 GiB used: 269.55 GiB (56.5%)
ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLB512HAJQ-00000 size: 476.94 GiB
temp: 39.9 C
Partition: ID-1: / size: 287.83 GiB used: 269.51 GiB (93.6%) fs: ext4 dev: /dev/nvme0n1p8
ID-2: /boot/efi size: 96 MiB used: 38.4 MiB (40.0%) fs: vfat dev: /dev/nvme0n1p1
Swap: Alert: No Swap data was found.
Sensors: System Temperatures: cpu: 46.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 287 Uptime: 2h 52m Memory: 15.38 GiB used: 6.78 GiB (44.0%) Init: systemd
Compilers: gcc: 10.2.0 clang: 11.0.1 Packages: 1469 Client: KDE Plasma v: 5.20.5
inxi: 3.3.00
I also tried to insert a part of the output of journalctl -b -0
here but if I try to post I just get 502 Bad gateway
, it’s probably too much for the forum. You can find the whole information under the link above.