Hi, All I can’t find a printer driver that allows me to use the printer on the above. I’m attaching system information, I hope someone can help me. Thanks in advance.
Operating System: Manjaro Linux
KDE Plasma Version: 6.3.3
KDE Frameworks Version: 6.12.0
Qt Version: 6.8.2
Kernel Version: 6.12.19-1-MANJARO (64-bit)
Graphics Platform: X11
Processors: 4 × Intel® Core™ i3-3220 CPU @ 3.30GHz
Memory: 15.6 GiB of RAM
Graphics Processor: NVC1
Same answer as here:
Network printer added but does not print (Cannon Pixma mx-410) - #4 by Nachlese
it doesn’t need a driver when connected via network.
AirPrint / IPP everywhere are keywords …
Or look here:
→
Information provided from *-fetch type applications might be fine for someone wishing to buy your computer, but for Support purposes it’s best to ask your system directly. Please provide system information as described (below).
Regards.
Welcome to the Manjaro community
As a new or infrequent forum user, please take some time to familiarise yourself with Forum requirements, and the many ways to use the forum to your benefit:
The Update Announcements contain important information and a Known Issues and Solutions section that should generally be checked before posting a request for support.
Output of this command (formatted according to forum requirements) may be useful for those wishing to help:
inxi --filter --verbosity=8
or the short form:
inxi -zv8
Be prepared to provide more information and outputs from other commands whenever asked.
Regards.
Thanks soundofthunder. Here is the link where I uploaded the result of the command you instructed me to use.
System:
Kernel: 6.12.19-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.12-x86_64
root=UUID=e7de8309-daa4-4ca6-9e5b-6db656352a28 rw quiet splash
udev.log_priority=3
Desktop: KDE Plasma v: 6.3.3 tk: Qt v: N/A info: frameworks v: 6.12.0
wm: kwin_x11 vt: 2 dm: SDDM Distro: Manjaro base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: H61M-S serial: <superuser required>
uuid: <superuser required> UEFI: American Megatrends v: P1.60
date: 07/11/2012
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 16 GiB available: 15.58 GiB used: 2.65 GiB (17.0%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 16 GiB slots: 2 modules: 2 EC: None
max-module-size: 8 GiB note: est.
Device-1: ChannelA-DIMM0 type: DDR3 detail: synchronous size: 8 GiB
speed: 1067 MT/s volts: N/A width (bits): data: 64 total: 64
manufacturer: Micron part-no: CT102464BD160B.C16 serial: <filter>
Device-2: ChannelB-DIMM0 type: DDR3 detail: synchronous size: 8 GiB
speed: 1067 MT/s volts: N/A width (bits): data: 64 total: 64
manufacturer: Micron part-no: CT102464BD160B.C16 serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i3-3220 bits: 64 type: MT MCP arch: Ivy Bridge
gen: core 3 level: v2 built: 2012-15 process: Intel 22nm family: 6
model-id: 0x3A (58) stepping: 9 microcode: 0x21
Topology: cpus: 1x dies: 1 clusters: 2 cores: 2 threads: 4 tpc: 2
smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB
desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 3300 min/max: 1600/3300 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 3300 2: 3300 3: 3300 4: 3300 bogomips: 26350
Flags: acpi aperfmperf apic arat arch_perfmon avx bts clflush cmov
constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb
ept erms est f16c flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs
lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae
pat pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts
rdtscp rep_good sep smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid xsave
xsaveopt xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW;
STIBP: conditional; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GF108 [GeForce GT 620] vendor: Point of View BV
driver: nouveau v: kernel non-free: series: 390.xx+
status: legacy (EOL~2022-11-22) last: release: 390.157 kernel: 6.0
xorg: 1.21 arch: Fermi code: GF1xx process: 40/28nm built: 2010-2016 pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: HDMI-A-1
empty: DVI-I-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:0f01 class-ID: 0300
temp: 49.0 C
Device-2: Arkmicro USB2.0 PC CAMERA driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 2-1.2:4
chip-ID: 18ec:3399 class-ID: 0102
Display: x11 server: X.Org v: 21.1.16 with: Xwayland v: 24.1.6
compositor: kwin_x11 driver: X: loaded: modesetting alternate: fbdev,vesa
dri: nouveau gpu: nouveau display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93") monitors: <missing: xrandr>
Monitor-1: HDMI-A-1 model: 27N1 serial: <filter> built: 2021
res: 1920x1080 dpi: 81 gamma: 1.2 chroma: red: x: 0.659 y: 0.329 green:
x: 0.325 y: 0.612 blue: x: 0.149 y: 0.059 white: x: 0.310 y: 0.337
size: 527x296mm (20.75x11.65") diag: 685mm (27") ratio: 16:9
modes: 1920x1080, 1920x1080i, 1680x1050, 1280x1024, 1280x960, 1280x720,
1024x768, 800x600, 720x576, 720x480, 640x480, 720x400
API: EGL v: 1.5 hw: drv: nvidia nouveau platforms: device: 0 drv: nouveau
device: 1 drv: swrast gbm: drv: nouveau surfaceless: drv: nouveau x11:
drv: nouveau inactive: wayland
API: OpenGL v: 4.5 compat-v: 4.3 vendor: mesa v: 25.0.1-arch1.2 glx-v: 1.4
direct-render: yes renderer: NVC1 device-ID: 10de:0f01 memory: 1.94 GiB
unified: no
API: Vulkan Message: No Vulkan data available.
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor wl: wayland-info x11: xdpyinfo,xprop
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: ASRock driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:1c20 class-ID: 0403
Device-2: NVIDIA GF108 High Definition Audio vendor: Point of View BV
driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 16
bus-ID: 01:00.1 chip-ID: 10de:0bea class-ID: 0403
Device-3: Arkmicro USB2.0 PC CAMERA driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 2-1.2:4
chip-ID: 18ec:3399 class-ID: 0102
API: ALSA v: k6.12.19-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.4.1 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE driver: r8169 v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 port: d000 bus-ID: 02:00.0 chip-ID: 10ec:8125
class-ID: 0200
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Qualcomm Atheros AR8152 v2.0 Fast Ethernet vendor: ASRock
driver: atl1c v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: c000
bus-ID: 03:00.0 chip-ID: 1969:2062 class-ID: 0200
IF: enp3s0 state: down mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.3:3 chip-ID: 0bda:a725
class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 2.38 TiB used: 42.52 GiB (1.7%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST500DM002-1BD142
size: 465.76 GiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: HP74 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST31000524AS
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: JC4B scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 vendor: Crucial model: CT1000MX500SSD1
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
tech: SSD serial: <filter> fw-rev: 046 scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Generic model: USB size: 111.79 GiB
block-size: physical: 512 B logical: 512 B type: USB rev: 2.0 spd: 480 Mb/s
lanes: 1 mode: 2.0 tech: N/A serial: <filter> fw-rev: 9.02 scheme: MBR
Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH24NSD5 rev: LV00
dev-links: cdrom
Features: speed: 12 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 146.49 GiB size: 143.13 GiB (97.71%)
used: 42.48 GiB (29.7%) fs: ext4 dev: /dev/sdc8 maj-min: 8:40 label: N/A
uuid: e7de8309-daa4-4ca6-9e5b-6db656352a28
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
used: 37.8 MiB (39.3%) fs: vfat dev: /dev/sdc4 maj-min: 8:36 label: N/A
uuid: 2272-631C
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 1 KiB fs: <superuser required> label: N/A
uuid: N/A
ID-2: /dev/sda5 maj-min: 8:5 size: 465.76 GiB fs: ntfs label: N/A
uuid: 01DA68249D4C8500
ID-3: /dev/sdb1 maj-min: 8:17 size: 1 KiB fs: <superuser required>
label: N/A uuid: N/A
ID-4: /dev/sdb5 maj-min: 8:21 size: 931.51 GiB fs: ntfs label: N/A
uuid: 01DA682499BF8DB0
ID-5: /dev/sdc1 maj-min: 8:33 size: 100 MiB fs: ntfs label: Riservato per
il sistema uuid: 74F84A41F84A01BA
ID-6: /dev/sdc2 maj-min: 8:34 size: 291.01 GiB fs: ntfs label: N/A
uuid: 38104B26104AEA88
ID-7: /dev/sdc3 maj-min: 8:35 size: 292.97 GiB fs: ntfs label: Volume
uuid: EC967C34967C017E
ID-8: /dev/sdc5 maj-min: 8:37 size: 99.65 GiB fs: ext4 label: N/A
uuid: f86673f8-c65d-438e-a9a8-b7c73276e0f6
ID-9: /dev/sdc6 maj-min: 8:38 size: 100.44 GiB fs: ext4 label: N/A
uuid: 390f4c3d-8458-46a9-8cc9-6884834d5c59
ID-10: /dev/sdc7 maj-min: 8:39 size: 773 MiB fs: ntfs label: N/A
uuid: C234269A34269189
ID-11: /dev/sdd1 maj-min: 8:49 size: 111.79 GiB fs: ext4 label: Bkup
uuid: 2701671c-d6ef-0a48-8570-6aaeecab88cc
USB:
Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:0024
class-ID: 0900
Device-1: 1-1.3:3 info: Realtek Bluetooth Radio type: bluetooth
driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 500mA chip-ID: 0bda:a725 class-ID: e001 serial: <filter>
Hub-3: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:0024
class-ID: 0900
Device-1: 2-1.1:3 info: Logitech Mouse type: mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
chip-ID: 046d:c077 class-ID: 0301
Device-2: 2-1.2:4 info: Arkmicro USB2.0 PC CAMERA type: video,audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 200mA
chip-ID: 18ec:3399 class-ID: 0102
Device-3: 2-1.3:5 info: Logitech Keyboard K120 type: keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 90mA
chip-ID: 046d:c31c class-ID: 0300
Device-4: 2-1.5:7 info: Alcor Micro USB 2.0-IDE bridge type: mass storage
driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 100mA chip-ID: 058f:6390 class-ID: 0806
Device-5: 2-1.6:8 info: SCM Microsystems uTrust 2700 R Smart Card Reader
type: smart card driver: N/A interfaces: 1 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 76mA
chip-ID: 04e6:5810 class-ID: 0b00 serial: <filter>
Sensors:
System Temperatures: cpu: 49.0 C mobo: N/A gpu: nouveau temp: 49.0 C
Fan Speeds (rpm): N/A
Repos:
Packages: 1387 pm: pacman pkgs: 1369 libs: 380 tools: octopi,pamac,yay
pm: flatpak pkgs: 5 pm: snap pkgs: 13
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.netcologne.de/manjaro/stable/$repo/$arch
2: https://ftp.lysator.liu.se/pub/manjaro/stable/$repo/$arch
3: http://ossmirror.mycloud.services/os/linux/manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 219
1: cpu: 15.6% command: firefox pid: 23421 mem: 590.3 MiB (3.6%)
2: cpu: 10.1% command: zsh pid: 25017 mem: 10.2 MiB (0.0%)
3: cpu: 8.0% command: kwin_x11 pid: 979 mem: 220.7 MiB (1.3%)
4: cpu: 7.2% command: konsole pid: 25008 mem: 223.5 MiB (1.4%)
5: cpu: 6.6% command: Xorg pid: 778 mem: 86.7 MiB (0.5%)
Memory top: 5 of 219
1: mem: 600.6 MiB (3.7%) command: plasmashell pid: 996 cpu: 4.7%
2: mem: 590.3 MiB (3.6%) command: firefox pid: 23421 cpu: 15.6%
3: mem: 234.2 MiB (1.4%) command: firefox pid: 24192 cpu: 5.0%
4: mem: 228.1 MiB (1.4%) command: acestreamengine pid: 1389 cpu: 0.4%
5: mem: 223.5 MiB (1.4%) command: konsole pid: 25008 cpu: 7.2%
Info:
Processes: 219 Power: uptime: 2h 40m states: freeze,standby,mem,disk
suspend: deep avail: s2idle,shallow wakeups: 1 hibernate: platform
avail: shutdown, reboot, suspend, test_resume image: 6.21 GiB
services: org_kde_powerdevil, power-profiles-daemon, upowerd Init: systemd
v: 257 default: graphical tool: systemctl
Compilers: gcc: 14.2.1 Shell: Zsh v: 5.9 default: Bash v: 5.2.37
running-in: konsole inxi: 3.3.37
Your BIOS is quite old. It may be beneficial to check your mainboard manufacturer for the latest non-beta BIOS update.
Regards.
Yes I am aware of this, but I have other distros installed on the same machine and since everything works perfectly I would like to avoid any risk unless forced.
Regards.
Mod edit:- Only use preformatted text when it’s needed for code or command output.
Well, you’re the administrator of your machine, and ultimately responsible for your own maintenance; we can only bring these potential issues to your attention.
Cheers.
Thanks soundofthunder. I followed your suggestion and updated my computer's bios. Now I'm waiting for someone to tell me if it's possible to solve the printer problem. Best regards and thanks again for your suggestions.
Have you tried the driver that @Nachlese suggested?
In order to build packages from the AUR, make certain that you have the base-devel package installed.
You also may need linux-headers appropriate for your kernel. (sudo pacman -S linux612-headers)
If you plan on using Pamac to build the package you also have to have AUR support enabled in Pamac.
sudo pacman -S base-devel
In terminal:
pamac build cnijfilter2
Most welcome.
Again, a reminder to;
For any other comments just enter them as you normally would.
Regards.