these is the result when i try to run caliber-ebook-edit or viewer from terminal
>ebook-edit INT ✘
The Qt WebEngine Render process crashed with termination type: 2 and exit code: 159
Restarting Qt WebEngine
The Qt WebEngine Render process crashed with termination type: 2 and exit code: 159
The Qt WebEngine Render process crashed too often
qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 818, resource id: 11816507, major code: 40 (TranslateCoords), minor code: 0
this is the output of inxi command:
`System:
Kernel: 5.17.0-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-5.17-x86_64
root=UUID=f13b6869-6236-4de6-bbad-73b48f94195b rw rootflags=subvol=@ quiet
udev.log_priority=3
Desktop: Xfce v: 4.16.0 tk: Gtk v: 3.24.29 info: xfce4-panel wm: xfwm
v: 4.16.1 vt: 7 dm: LightDM v: 1.30.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ECS model: H61H2-MV v: 1.0 serial: <superuser required>
BIOS: American Megatrends v: 4.6.5 date: 10/12/2012
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 5.65 GiB used: 2.7 GiB (47.8%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i3-3210 bits: 64 type: MT MCP arch: Ivy Bridge
family: 6 model-id: 0x3A (58) stepping: 9 microcode: 0x21
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1596 high: 1597 min/max: 1600/3200 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 1596 2: 1597 3: 1596
4: 1596 bogomips: 25549
Flags: acpi aperfmperf apic arat arch_perfmon avx bts clflush cmov
constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept
erms est f16c flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs
lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae
pat pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts
rdtscp rep_good sep smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid xsave
xsaveopt xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics
vendor: Elite Systems driver: i915 v: kernel ports: active: VGA-1
empty: none bus-ID: 00:02.0 chip-ID: 8086:0152 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.3 compositor: xfwm v: 4.16.1 driver:
X: loaded: vesa gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1368x768 s-dpi: 84 s-size: 414x232mm (16.30x9.13")
s-diag: 475mm (18.68") monitors: <missing: xrandr>
Monitor-1: VGA-1 model: BenQ G922HDAL serial: <filter> built: 2011
res: 1366x768 dpi: 85 gamma: 1.2 size: 410x230mm (16.14x9.06")
diag: 470mm (18.5") ratio: 16:9 modes: max: 1366x768 min: 720x400
Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: Elite Systems driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:1c20 class-ID: 0403
Sound Server-1: ALSA v: k5.17.0-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.20 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.48 running: no
Network:
Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Elite Systems
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000
bus-ID: 02:00.0 chip-ID: 10ec:8136 class-ID: 0200
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
driver: btusb v: 0.8 bus-ID: 1-1.4:4 chip-ID: 0a12:0001 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 465.76 GiB used: 25.42 GiB (5.5%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: DT01ACA050
size: 465.76 GiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: A750 scheme: MBR
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 200.42 GiB size: 200.42 GiB (100.00%)
used: 25.42 GiB (12.7%) fs: btrfs dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: f13b6869-6236-4de6-bbad-73b48f94195b
ID-2: /home raw-size: 200.42 GiB size: 200.42 GiB (100.00%)
used: 25.42 GiB (12.7%) fs: btrfs dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: f13b6869-6236-4de6-bbad-73b48f94195b
ID-3: /var/cache raw-size: 200.42 GiB size: 200.42 GiB (100.00%)
used: 25.42 GiB (12.7%) fs: btrfs dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: f13b6869-6236-4de6-bbad-73b48f94195b
ID-4: /var/log raw-size: 200.42 GiB size: 200.42 GiB (100.00%)
used: 25.42 GiB (12.7%) fs: btrfs dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: f13b6869-6236-4de6-bbad-73b48f94195b
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 265.29 GiB fs: ntfs label: N/A
uuid: 4E7C5D60346681C2
ID-2: /dev/sda2 maj-min: 8:2 size: 50 MiB fs: ntfs
label: R\xc3\xa9serv\xc3\xa9 au syst\xc3\xa8me uuid: B4389C54389C1786
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:0024 class-ID: 0900
Device-1: 1-1.3:3 info: Primax HP PR1101U / PMX-KPR1101U Keyboard
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s power: 100mA chip-ID: 0461:0010 class-ID: 0300
Device-2: 1-1.4:4
info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: Bluetooth
driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA
chip-ID: 0a12:0001 class-ID: e001
Hub-3: 2-0:1 info: Full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:0024 class-ID: 0900
Device-1: 2-1.6:3 info: [Maxxter] Optical Gaming Mouse [Xtrem]
type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1
speed: 1.5 Mb/s power: 100mA chip-ID: 18f8:0f97 class-ID: 0301
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Info:
Processes: 207 Uptime: 7m wakeups: 0 Init: systemd v: 250 tool: systemctl
Compilers: gcc: 11.2.0 clang: 13.0.1 Packages: pacman: 1194 lib: 344
Shell: Zsh v: 5.8.1 running-in: tilix inxi: 3.3.14
`
