Boot stuck at Disabling IRQ

I am new to Manjaro and my system seems to be stuck at the below screen.
Just restarts and comes back to the same screen and the keyboard doesnt seem to work.

boot on USB iso manjaro
open a terminal
a browser on this topic
and reports

inxi -Fxza --no-host
sudo parted -l
sudo efibootmgr -v
test -d /sys/firmware/efi && echo efi || echo bios

Well, I reinstalled a new copy of Manajro and now I am still getting a few lines of No irq handler for vector.

Installed the 440xx driver, had the main issue after installing the 450xx driver

0000:2b:00.0 (0300:10de:21c4) Display controller nVidia Corporation:

              NAME               VERSION          FREEDRIVER           TYPE

video-nvidia-450xx            2019.10.25               false            PCI
video-nvidia-440xx            2019.10.25               false            PCI
       video-linux            2018.05.04                true            PCI
 video-modesetting            2020.01.13                true            PCI

open a terminal
a browser on this topic
and reports

inxi -Fxza --no-host
sudo parted -l
sudo efibootmgr -v
test -d /sys/firmware/efi && echo efi || echo bios

Here is what I have,

 ~ >>> inxi -Fxza --no-host                                                     
  Kernel: 5.7.15-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.7-x86_64 
  root=UUID=4357cac3-ea2c-48fa-b3b2-469fe0d1d9a1 rw quiet apparmor=1 
  security=apparmor udev.log_priority=3 
  Desktop: GNOME 3.36.5 tk: GTK 3.24.22 wm: gnome-shell dm: GDM 3.36.3 
  Distro: Manjaro Linux 
  Type: Desktop Mobo: Micro-Star model: MAG B550M MORTAR (MS-7C94) v: 1.0 
  serial: <filter> UEFI: American Megatrends v: 1.00 date: 05/12/2020 
  Topology: 8-Core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP 
  arch: Zen 2 family: 17 (23) model-id: 71 (113) stepping: N/A 
  microcode: 8701021 L2 cache: 4096 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 134476 
  Speed: 4200 MHz min/max: N/A Core speeds (MHz): 1: 4200 2: 4193 3: 4222 
  4: 4188 5: 4190 6: 4219 7: 4210 8: 4195 9: 4198 10: 4185 11: 4200 12: 4200 
  13: 4171 14: 4200 15: 4194 16: 4198 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP: 
  conditional, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
  Device-1: NVIDIA TU116 [GeForce GTX 1660 SUPER] vendor: ASUSTeK 
  driver: nvidia v: 440.100 alternate: nouveau,nvidia_drm bus ID: 2b:00.0 
  chip ID: 10de:21c4 
  Display: x11 server: 1.20.8 compositor: gnome-shell 
  driver: modesetting,nouveau alternate: fbdev,nv,vesa 
  resolution: <xdpyinfo missing> 
  OpenGL: renderer: GeForce GTX 1660 SUPER/PCIe/SSE2 v: 4.6.0 NVIDIA 440.100 
  direct render: Yes 
  Device-1: NVIDIA TU116 High Definition Audio vendor: ASUSTeK 
  driver: snd_hda_intel v: kernel bus ID: 2b:00.1 chip ID: 10de:1aeb 
  Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI 
  driver: snd_hda_intel v: kernel bus ID: 2d:00.4 chip ID: 1022:1487 
  Device-3: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo 
  bus ID: 5-2.3:4 chip ID: 046d:0825 serial: <filter> 
  Sound Server: ALSA v: k5.7.15-1-MANJARO 
  Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8125 
  v: 9.003.05-NAPI modules: r8169 port: f000 bus ID: 2a:00.0 
  chip ID: 10ec:8125 
  IF: enp42s0 state: up speed: 100 Mbps duplex: full mac: <filter> 
  Device-2: Realtek 802.11n type: USB driver: usb-network bus ID: 1-6:2 
  chip ID: 0bda:f179 serial: <filter> 
  Local Storage: total: 1.36 TiB used: 63.01 GiB (4.5%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/nvme0n1 vendor: Crucial model: CT500P1SSD8 size: 465.76 GiB 
  block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 
  serial: <filter> rev: P3CR020 scheme: GPT 
  ID-2: /dev/sda vendor: Seagate model: ST1000LM024 HN-M101MBB 
  size: 931.51 GiB block size: physical: 4096 B logical: 512 B 
  speed: 3.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 0003 scheme: MBR 
  ID-1: / raw size: 465.46 GiB size: 457.16 GiB (98.22%) 
  used: 11.87 GiB (2.6%) fs: ext4 dev: /dev/nvme0n1p2 
  Alert: No Swap data was found. 
  System Temperatures: cpu: 51.1 C mobo: N/A gpu: nvidia temp: 45 C 
  Fan Speeds (RPM): N/A gpu: nvidia fan: 27% 
  Processes: 402 Uptime: 7h 38m Memory: 31.37 GiB used: 14.51 GiB (46.2%) 
  Init: systemd v: 245 Compilers: gcc: 10.1.0 Packages: 1199 pacman: 1191 
  lib: 344 flatpak: 0 snap: 8 Shell: Zsh v: 5.8 running in: gnome-terminal 
  inxi: 3.1.05 

~ >>> sudo parted -l
[sudo] password for vikrantshukla:
Model: ATA ST1000LM024 HN-M (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:

Number Start End Size Type File system Flags
1 32.8kB 1000GB 1000GB primary ext4

Model: CT500P1SSD8 (nvme)
Disk /dev/nvme0n1: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number Start End Size File system Name Flags
1 2097kB 317MB 315MB fat32 boot, esp
2 317MB 500GB 500GB ext4

sudo efibootmgr -v
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0009,0002
Boot0000* Manjaro HD(1,GPT,d59926b0-20db-f84a-a3f8-eca1261b2d20,0x1000,0x96000)/File(\EFI\MANJARO\GRUBX64.EFI)
Boot0002 Hard Drive BBS(HD,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0200)…GO…NO…S.T. .H.N.-.M.1.0.1.M.B.B…,.@.r.d.=.X…A…>…Gd-.;.A…MQ…L.2.S.U.R.9.J.D.B. . . . . . …BO…NO…C.T.5.0.0.P.1.S.S.D.8…,.@.r.d.=.X…A…u.([.S…Gd-.;.A…MQ…L.…BO
Boot0009* UEFI OS HD(1,GPT,d59926b0-20db-f84a-a3f8-eca1261b2d20,0x1000,0x96000)/File(\EFI\BOOT\BOOTX64.EFI)…BO

~ >>> test -d /sys/firmware/efi && echo efi || echo bios [1]

update your bios

Thanks @stephane will try updating my BIOS.

Hi @stephane BIOS is updated to version 1.20, still getting the IRQ handler errors on boot up