I get a stuttering black screen when trying to boot that does not let me prompt grub but every other 2nd attempt I’m able to see the msi logo and can access grub.
So far I have tried a few things I saw in other topics like disabling nouveau and booting. With this the boot process gets stuck at Started accounts service or Wpa supplicant.
I have a MSI GE62 6QF Apache Pro
NVIDIA GTX970M
Kernel 5.9
I wish I could offer you an inxi as suggested in the forum but I don’t know how to do it since I can’t access tty.
The OS was working fine before I attempted to install nvidia 390xx bumblebee.
I also deleted /etc/X11/xorg.conf.d/90-mhwd.conf before installation, in case it helps in any way.
I hope you can help me. Thank you!
EDIT= things done so far
Accessed chroot via Live ISO
manjaro-chroot -a
grub-probe: error: cannot find a GRUB drive for /dev/sdc1. Check your device.map.
grub-probe: error: cannot find a GRUB drive for /dev/sdc1. Check your device.map.
==> Mounting (ManjaroLinux) [/dev/sdb1]
--> mount: [/mnt]
inxi from chroot
inxi --admin --verbosity=7 --filter --no-host --width
System:
Kernel: 5.9.16-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=manjaro misolabel=MANJARO_XFCEM_2021 quiet systemd.show_status=1
apparmor=1 security=apparmor driver=free nouveau.modeset=1 i915.modeset=1
radeon.modeset=1
Desktop: Xfce 4.14.3 tk: Gtk 3.24.23 info: xfce4-panel wm: xfwm4
dm: LightDM 1.30.0 Distro: Manjaro Linux
Machine:
Type: Laptop System: Micro-Star product: GE62 6QF v: REV:1.0
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Micro-Star model: MS-16J4 v: REV:0.A serial: <filter>
UEFI [Legacy]: American Megatrends v: E16J4IMS.110 date: 04/26/2016
Battery:
ID-1: BAT1 charge: 41.6 Wh condition: 42.1/53.4 Wh (79%) volts: 12.2/10.9
model: MSI BIF0_9 type: Li-ion serial: N/A status: Unknown
Memory:
RAM: total: 15.51 GiB used: 1.6 GiB (10.3%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Quad Core model: Intel Core i7-6700HQ bits: 64 type: MT MCP
arch: Skylake-S family: 6 model-id: 5E (94) stepping: 3 microcode: E2
L2 cache: 6 MiB bogomips: 41621
Speed: 900 MHz min/max: 800/3500 MHz Core speeds (MHz): 1: 900 2: 901 3: 900
4: 900 5: 900 6: 900 7: 900 8: 900
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr hle ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good rtm sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT vulnerable
Graphics:
Device-1: Intel HD Graphics 530 vendor: Micro-Star MSI driver: i915
v: kernel bus ID: 00:02.0 chip ID: 8086:191b
Device-2: NVIDIA GM204M [GeForce GTX 970M] vendor: Micro-Star MSI
driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:13d8
Display: x11 server: X.Org 1.20.10 driver: intel,nouveau
unloaded: modesetting alternate: fbdev,nv,vesa display ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
OpenGL: renderer: Mesa Intel HD Graphics 530 (SKL GT2) v: 4.6 Mesa 20.3.1
direct render: Yes
Audio:
Device-1: Intel 100 Series/C230 Series Family HD Audio
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 00:1f.3
chip ID: 8086:a170
Sound Server: ALSA v: k5.9.16-1-MANJARO
Network:
Device-1: Intel Wireless 3165 driver: iwlwifi v: kernel port: e000
bus ID: 02:00.0 chip ID: 8086:3165
IF: wlp2s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Qualcomm Atheros Killer E2400 Gigabit Ethernet
vendor: Micro-Star MSI driver: alx v: kernel port: d000 bus ID: 03:00.0
chip ID: 1969:e0a1
IF: enp3s0 state: down mac: <filter>
WAN IP: <filter>
RAID:
Message: No RAID data was found.
Drives:
Local Storage: total: 1.17 TiB used: 88.8 MiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: SK Hynix model: HFS256G39MND-3510A
size: 238.47 GiB block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 0P00
ID-2: /dev/sdb maj-min: 8:16 vendor: HGST (Hitachi) model: HTS721010A9E630
size: 931.51 GiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: A3J0
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Kingston
model: DT microDuo 3C size: 28.88 GiB block size: physical: 512 B
logical: 512 B serial: <filter> rev: PMAP
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Optical-1: /dev/sr0 vendor: TSSTcorp model: CDDVDW SU-208GB rev: TM00
dev-links: cdrom
Features: speed: 24 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw size: N/A size: 11.63 GiB used: 88.8 MiB (0.7%) fs: overlay
source: ERR-102 label: N/A uuid: N/A
Swap:
Alert: No Swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 300 MiB fs: vfat label: SYSTEM
uuid: F6BD-458F
ID-2: /dev/sda2 maj-min: 8:2 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/sda3 maj-min: 8:3 size: 216 GiB fs: ntfs label: OS_Install
uuid: 7428CB4A28CB0A56
ID-4: /dev/sda4 maj-min: 8:4 size: 877 MiB fs: ntfs label: N/A
uuid: 249CFB9B9CFB6628
ID-5: /dev/sda5 maj-min: 8:5 size: 900 MiB fs: ntfs label: WinRE tools
uuid: 1652C0D852C0BE2D
ID-6: /dev/sdb1 maj-min: 8:17 size: 922.71 GiB fs: ext4 label: N/A
uuid: 87467c1c-2e84-4892-99d6-6fedbd1a1528
ID-7: /dev/sdb2 maj-min: 8:18 size: 8.8 GiB fs: swap label: N/A
uuid: 767b044e-dfc4-4fe6-856c-0a94e3941aad
ID-8: /dev/sdc1 maj-min: 8:33 size: 2.01 GiB fs: iso9660
label: MANJARO_XFCEM_2021 uuid: 2021-01-03-08-37-31-00
ID-9: /dev/sdc2 maj-min: 8:34 size: 4 MiB fs: vfat label: MISO_EFI
uuid: 17F1-E15C
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Device-1: 1-7:2 info: MSI steel series rgb keyboard type: HID driver: usbhid
interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1770:ff00 serial: <filter>
Device-2: 1-10:3 info: Intel Bluetooth wireless interface type: Bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 8087:0a2a
Device-3: 1-12:4 info: Realtek RTS5129 Card Reader Controller
type: <vendor specific> driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc
interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0bda:0129 serial: <filter>
Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.0 speed: 5 Gb/s
chip ID: 1d6b:0003
Device-1: 2-3:2 info: Kingston DT microDuo 3C type: Mass Storage
driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0951:16ae
serial: <filter>
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s
chip ID: 1d6b:0003
Sensors:
System Temperatures: cpu: 55.5 C mobo: 27.8 C gpu: nouveau temp: 40.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 247 Uptime: 9m wakeups: 1 Init: systemd v: 247 Compilers:
gcc: N/A Packages: pacman: 1031 lib: 336 Shell: Bash v: 5.1.0
running in: xfce4-terminal inxi: 3.2.01
fdisk and lsblk from chroot
Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors
Disk model: HFS256G39MND-351
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 5E2A2D26-5982-4193-AB55-95E3EEA3FC27
Device Start End Sectors Size Type
/dev/sda1 2048 616447 614400 300M EFI System
/dev/sda2 616448 878591 262144 128M Microsoft reserved
/dev/sda3 878592 453855231 452976640 216G Microsoft basic data
/dev/sda4 496476160 498272255 1796096 877M Windows recovery environment
/dev/sda5 498274304 500117503 1843200 900M Windows recovery environment
Disk /dev/sdb: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: HGST HTS721010A9
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x80384db0
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 1935065125 1935063078 922.7G 83 Linux
/dev/sdb2 1935065126 1953520064 18454939 8.8G 82 Linux swap / Solaris
Partition 2 does not start on physical sector boundary.
Disk /dev/loop0: 85.06 MiB, 89194496 bytes, 174208 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 369.52 MiB, 387469312 bytes, 756776 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 871.83 MiB, 914182144 bytes, 1785512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 663.48 MiB, 695713792 bytes, 1358816 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sdc: 28.88 GiB, 31004295168 bytes, 60555264 sectors
Disk model: DT microDuo 3C
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 64 4213363 4213300 2G 0 Empty
/dev/sdc2 4213364 4221555 8192 4M ef EFI (FAT-12/16/32)
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 85.1M 1 loop
loop1 7:1 0 369.5M 1 loop
loop2 7:2 0 871.8M 1 loop
loop3 7:3 0 663.5M 1 loop
sda 8:0 0 238.5G 0 disk
|-sda1 8:1 0 300M 0 part
|-sda2 8:2 0 128M 0 part
|-sda3 8:3 0 216G 0 part
|-sda4 8:4 0 877M 0 part
`-sda5 8:5 0 900M 0 part
sdb 8:16 0 931.5G 0 disk
|-sdb1 8:17 0 922.7G 0 part /
`-sdb2 8:18 0 8.8G 0 part
sdc 8:32 1 28.9G 0 disk
|-sdc1 8:33 1 2G 0 part
`-sdc2 8:34 1 4M 0 part
sr0 11:0 1 1024M 0 rom
Xorg.0.log from chroot
cat /var/log/Xorg.0.log
[ 21.752]
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[ 21.752] Build Operating System: Linux Manjaro Linux
[ 21.752] Current Operating System: Linux lina-ge626qf 5.9.16-1-MANJARO #1 SMP PREEMPT Mon Dec 21 22:00:46 UTC 2020 x86_64
[ 21.752] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9-x86_64 root=UUID=87467c1c-2e84-4892-99d6-6fedbd1a1528 ro quiet resume=UUID=767b044e-dfc4-4fe6-856c-0a94e3941aad udev.log_priority=3
[ 21.752] Build Date: 16 December 2020 10:33:32PM
[ 21.752]
[ 21.753] Current version of pixman: 0.40.0
[ 21.753] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.753] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.753] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 24 09:57:08 2021
[ 21.914] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.914] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.914] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.071] (==) ServerLayout "layout"
[ 22.071] (**) |-->Screen "Screen0" (0)
[ 22.071] (**) | |-->Monitor "Monitor0"
[ 22.071] (**) | |-->Device "Device0"
[ 22.071] (==) Automatically adding devices
[ 22.071] (==) Automatically enabling devices
[ 22.071] (==) Automatically adding GPU devices
[ 22.071] (==) Automatically binding GPU devices
[ 22.071] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 22.183] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 22.183] Entry deleted from font path.
[ 22.183] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 22.183] Entry deleted from font path.
[ 22.183] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 22.183] Entry deleted from font path.
[ 22.183] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 22.183] Entry deleted from font path.
[ 22.183] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 22.183] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.183] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.183] (II) Module ABI versions:
[ 22.183] X.Org ANSI C Emulation: 0.4
[ 22.183] X.Org Video Driver: 24.1
[ 22.183] X.Org XInput driver : 24.1
[ 22.183] X.Org Server Extension : 10.0
[ 22.185] (++) using VT number 7
[ 22.185] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 22.187] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 22.187] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 22.194] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 22.194] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 22.197] (--) PCI:*(0@0:2:0) 8086:191b:1462:116d rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 22.198] (--) PCI: (1@0:0:0) 10de:13d8:1462:116d rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 22.198] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.198] (II) LoadModule: "glx"
[ 22.342] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.725] (II) Module glx: vendor="X.Org Foundation"
[ 22.725] compiled for 1.20.10, module version = 1.0.0
[ 22.725] ABI class: X.Org Server Extension, version 10.0
[ 22.725] (II) LoadModule: "nvidia"
[ 22.725] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 22.901] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 22.901] compiled for 1.6.99.901, module version = 1.0.0
[ 22.901] Module class: X.Org Video Driver
[ 22.918] (II) NVIDIA dlloader X Driver 460.39 Thu Jan 21 21:54:11 UTC 2021
[ 22.918] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 22.931] (II) Loading sub module "fb"
[ 22.932] (II) LoadModule: "fb"
[ 22.932] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22.990] (II) Module fb: vendor="X.Org Foundation"
[ 22.990] compiled for 1.20.10, module version = 1.0.0
[ 22.990] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.990] (II) Loading sub module "wfb"
[ 22.990] (II) LoadModule: "wfb"
[ 22.990] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 23.009] (II) Module wfb: vendor="X.Org Foundation"
[ 23.009] compiled for 1.20.10, module version = 1.0.0
[ 23.009] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.009] (II) Loading sub module "ramdac"
[ 23.009] (II) LoadModule: "ramdac"
[ 23.009] (II) Module "ramdac" already built-in
[ 23.041] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 23.041] (==) NVIDIA(0): RGB weight 888
[ 23.041] (==) NVIDIA(0): Default visual is TrueColor
[ 23.041] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.046] (**) Option "AllowNVIDIAGpuScreens"
[ 23.046] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 23.046] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 23.046] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 23.046] (**) NVIDIA(0): Enabling 2D acceleration
[ 23.047] (II) Loading sub module "glxserver_nvidia"
[ 23.047] (II) LoadModule: "glxserver_nvidia"
[ 23.047] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 24.485] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 24.485] compiled for 1.6.99.901, module version = 1.0.0
[ 24.485] Module class: X.Org Server Extension
[ 24.485] (II) NVIDIA GLX Module 460.39 Thu Jan 21 21:51:40 UTC 2021
[ 24.501] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 25.258] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970M (GM204-A) at PCI:1:0:0 (GPU-0)
[ 25.258] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 25.258] (--) NVIDIA(0): VideoBIOS: 84.04.91.00.0e
[ 25.258] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 25.258] (II) NVIDIA(0): Validated MetaModes:
[ 25.258] (II) NVIDIA(0): "NULL"
[ 25.258] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 25.258] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 25.258] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 25.258] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 25.258] (II) NVIDIA: access.
[ 25.272] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 25.272] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 25.272] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 25.272] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 25.272] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 25.272] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 25.272] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 25.272] (II) NVIDIA(0): Config Options in the README.
[ 25.289] (II) NVIDIA(0): Setting mode "NULL"
[ 25.305] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 25.305] (==) NVIDIA(0): Backing store enabled
[ 25.305] (==) NVIDIA(0): Silken mouse disabled
[ 25.305] (**) NVIDIA(0): DPMS enabled
[ 25.315] (II) Loading sub module "dri2"
[ 25.315] (II) LoadModule: "dri2"
[ 25.316] (II) Module "dri2" already built-in
[ 25.316] (II) NVIDIA(0): [DRI2] Setup complete
[ 25.316] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 25.316] (II) Initializing extension Generic Event Extension
[ 25.316] (II) Initializing extension SHAPE
[ 25.316] (II) Initializing extension MIT-SHM
[ 25.316] (II) Initializing extension XInputExtension
[ 25.317] (II) Initializing extension XTEST
[ 25.317] (II) Initializing extension BIG-REQUESTS
[ 25.317] (II) Initializing extension SYNC
[ 25.317] (II) Initializing extension XKEYBOARD
[ 25.317] (II) Initializing extension XC-MISC
[ 25.317] (II) Initializing extension SECURITY
[ 25.317] (II) Initializing extension XFIXES
[ 25.317] (II) Initializing extension RENDER
[ 25.317] (II) Initializing extension RANDR
[ 25.317] (II) Initializing extension COMPOSITE
[ 25.317] (II) Initializing extension DAMAGE
[ 25.318] (II) Initializing extension MIT-SCREEN-SAVER
[ 25.318] (II) Initializing extension DOUBLE-BUFFER
[ 25.318] (II) Initializing extension RECORD
[ 25.318] (II) Initializing extension DPMS
[ 25.318] (II) Initializing extension Present
[ 25.318] (II) Initializing extension DRI3
[ 25.318] (II) Initializing extension X-Resource
[ 25.318] (II) Initializing extension XVideo
[ 25.318] (II) Initializing extension XVideo-MotionCompensation
[ 25.318] (II) Initializing extension GLX
[ 25.318] (II) Initializing extension GLX
[ 25.318] (II) Indirect GLX disabled.
[ 25.318] (II) GLX: Another vendor is already registered for screen 0
[ 25.318] (II) Initializing extension XFree86-VidModeExtension
[ 25.318] (II) Initializing extension XFree86-DGA
[ 25.319] (II) Initializing extension XFree86-DRI
[ 25.319] (II) Initializing extension DRI2
[ 25.319] (II) Initializing extension NV-GLX
[ 25.319] (II) Initializing extension NV-CONTROL
[ 25.765] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.765] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.765] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 25.765] (**) Power Button: Applying InputClass "system-keyboard"
[ 25.765] (II) LoadModule: "libinput"
[ 25.773] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 25.798] (II) Module libinput: vendor="X.Org Foundation"
[ 25.798] compiled for 1.20.8, module version = 0.30.0
[ 25.798] Module class: X.Org XInput Driver
[ 25.798] ABI class: X.Org XInput driver, version 24.1
[ 25.798] (II) Using input driver 'libinput' for 'Power Button'
[ 25.799] (**) Power Button: always reports core events
[ 25.799] (**) Option "Device" "/dev/input/event3"
[ 25.799] (**) Option "_source" "server/udev"
[ 25.832] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 25.832] (II) event3 - Power Button: device is a keyboard
[ 25.832] (II) event3 - Power Button: device removed
[ 25.858] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 25.858] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.858] (**) Option "xkb_layout" "es"
[ 25.858] (**) Option "xkb_variant" "nodeadkeys"
[ 25.914] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 25.914] (II) event3 - Power Button: device is a keyboard
[ 25.916] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 25.916] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.916] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 25.916] (**) Video Bus: Applying InputClass "system-keyboard"
[ 25.916] (II) Using input driver 'libinput' for 'Video Bus'
[ 25.916] (**) Video Bus: always reports core events
[ 25.916] (**) Option "Device" "/dev/input/event8"
[ 25.916] (**) Option "_source" "server/udev"
[ 25.918] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 25.919] (II) event8 - Video Bus: device is a keyboard
[ 25.919] (II) event8 - Video Bus: device removed
[ 25.991] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"
[ 25.991] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.991] (**) Option "xkb_layout" "es"
[ 25.991] (**) Option "xkb_variant" "nodeadkeys"
[ 25.994] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 25.994] (II) event8 - Video Bus: device is a keyboard
[ 25.996] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 25.996] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.996] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 25.996] (**) Video Bus: Applying InputClass "system-keyboard"
[ 25.996] (II) Using input driver 'libinput' for 'Video Bus'
[ 25.996] (**) Video Bus: always reports core events
[ 25.996] (**) Option "Device" "/dev/input/event9"
[ 25.996] (**) Option "_source" "server/udev"
[ 26.000] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 26.000] (II) event9 - Video Bus: device is a keyboard
[ 26.000] (II) event9 - Video Bus: device removed
[ 26.071] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input10/event9"
[ 26.071] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 26.071] (**) Option "xkb_layout" "es"
[ 26.071] (**) Option "xkb_variant" "nodeadkeys"
[ 26.073] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 26.073] (II) event9 - Video Bus: device is a keyboard
[ 26.074] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 26.074] (II) No input driver specified, ignoring this device.
[ 26.074] (II) This device may have been added with another device file.
[ 26.074] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 26.074] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.074] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 26.075] (**) Power Button: Applying InputClass "system-keyboard"
[ 26.075] (II) Using input driver 'libinput' for 'Power Button'
[ 26.075] (**) Power Button: always reports core events
[ 26.075] (**) Option "Device" "/dev/input/event2"
[ 26.075] (**) Option "_source" "server/udev"
[ 26.076] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 26.076] (II) event2 - Power Button: device is a keyboard
[ 26.076] (II) event2 - Power Button: device removed
[ 26.111] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 26.111] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 26.111] (**) Option "xkb_layout" "es"
[ 26.111] (**) Option "xkb_variant" "nodeadkeys"
[ 26.114] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 26.114] (II) event2 - Power Button: device is a keyboard
[ 26.116] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 26.116] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.116] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 26.116] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 26.116] (II) Using input driver 'libinput' for 'Sleep Button'
[ 26.116] (**) Sleep Button: always reports core events
[ 26.116] (**) Option "Device" "/dev/input/event1"
[ 26.116] (**) Option "_source" "server/udev"
[ 26.118] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 26.119] (II) event1 - Sleep Button: device is a keyboard
[ 26.119] (II) event1 - Sleep Button: device removed
[ 26.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 26.138] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 26.138] (**) Option "xkb_layout" "es"
[ 26.138] (**) Option "xkb_variant" "nodeadkeys"
[ 26.141] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 26.141] (II) event1 - Sleep Button: device is a keyboard
[ 26.144] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 26.144] (II) No input driver specified, ignoring this device.
[ 26.144] (II) This device may have been added with another device file.
[ 26.145] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 26.145] (II) No input driver specified, ignoring this device.
[ 26.145] (II) This device may have been added with another device file.
[ 26.146] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 26.146] (II) No input driver specified, ignoring this device.
[ 26.146] (II) This device may have been added with another device file.
[ 26.147] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 26.147] (II) No input driver specified, ignoring this device.
[ 26.147] (II) This device may have been added with another device file.
[ 26.148] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 26.148] (II) No input driver specified, ignoring this device.
[ 26.148] (II) This device may have been added with another device file.
[ 26.149] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[ 26.149] (II) No input driver specified, ignoring this device.
[ 26.149] (II) This device may have been added with another device file.
[ 26.150] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[ 26.150] (II) No input driver specified, ignoring this device.
[ 26.150] (II) This device may have been added with another device file.
[ 26.151] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 26.151] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.151] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 26.151] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 26.151] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 26.151] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.151] (**) Option "Device" "/dev/input/event4"
[ 26.151] (**) Option "_source" "server/udev"
[ 26.154] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 26.155] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 26.156] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 26.191] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 26.191] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 26.191] (**) Option "xkb_layout" "es"
[ 26.191] (**) Option "xkb_variant" "nodeadkeys"
[ 26.195] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 26.195] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 26.198] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 26.198] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 26.198] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 26.198] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 26.198] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.198] (**) Option "Device" "/dev/input/event7"
[ 26.198] (**) Option "_source" "server/udev"
[ 26.201] (II) event7 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 26.203] (II) event7 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 26.204] (II) event7 - SynPS/2 Synaptics TouchPad: device removed
[ 26.258] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 26.258] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 26.260] (**) Option "AccelerationScheme" "none"
[ 26.260] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 26.260] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 26.260] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 26.263] (II) event7 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 26.265] (II) event7 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 26.267] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 26.267] (II) No input driver specified, ignoring this device.
[ 26.267] (II) This device may have been added with another device file.
[ 26.268] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 26.268] (II) No input driver specified, ignoring this device.
[ 26.268] (II) This device may have been added with another device file.
[ 26.270] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event6)
[ 26.270] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 26.270] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 26.270] (**) MSI WMI hotkeys: Applying InputClass "system-keyboard"
[ 26.270] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 26.270] (**) MSI WMI hotkeys: always reports core events
[ 26.270] (**) Option "Device" "/dev/input/event6"
[ 26.270] (**) Option "_source" "server/udev"
[ 26.272] (II) event6 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 26.272] (II) event6 - MSI WMI hotkeys: device is a keyboard
[ 26.273] (II) event6 - MSI WMI hotkeys: device removed
[ 26.324] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event6"
[ 26.324] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
[ 26.324] (**) Option "xkb_layout" "es"
[ 26.324] (**) Option "xkb_variant" "nodeadkeys"
[ 26.327] (II) event6 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 26.327] (II) event6 - MSI WMI hotkeys: device is a keyboard
[ 83.188] (II) event3 - Power Button: device removed
[ 83.231] (II) event8 - Video Bus: device removed
[ 83.284] (II) event9 - Video Bus: device removed
[ 83.338] (II) event2 - Power Button: device removed
[ 83.364] (II) event1 - Sleep Button: device removed
[ 83.391] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 83.418] (II) event7 - SynPS/2 Synaptics TouchPad: device removed
[ 83.468] (II) event6 - MSI WMI hotkeys: device removed
[ 110.780] (II) UnloadModule: "libinput"
[ 110.780] (II) UnloadModule: "libinput"
[ 110.780] (II) UnloadModule: "libinput"
[ 110.781] (II) UnloadModule: "libinput"
[ 110.781] (II) UnloadModule: "libinput"
[ 110.781] (II) UnloadModule: "libinput"
[ 110.781] (II) UnloadModule: "libinput"
[ 110.781] (II) UnloadModule: "libinput"
[ 110.822] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 110.823] (II) Server terminated successfully (0). Closing log file.
Qs nvidia
pacman -Qs nvidia
local/lib32-libvdpau 1.4-1
Nvidia VDPAU library
local/lib32-nvidia-utils 460.39-1
NVIDIA drivers utilities (32-bit)
local/libvdpau 1.4-1
Nvidia VDPAU library
local/linux59-nvidia 460.39-1 (linux59-extramodules)
NVIDIA drivers for linux.
local/mhwd-nvidia 460.39-1
MHWD module-ids for nvidia 460.39
local/mhwd-nvidia-390xx 390.141-1
MHWD module-ids for nvidia 390.141
local/nvidia-prime 1.0-4
NVIDIA Prime Render Offload configuration and utilities
local/nvidia-utils 460.39-1
NVIDIA drivers utilities
local/xf86-video-nouveau 1.0.17-1 (xorg-drivers)
Open Source 3D acceleration driver for nVidia cards
and we’ll have to have someone who DOES know help you.