After an update I did today via pacman -Syu and a reboot (kernel update was included apparently), I can no longer open my application launcher. Alt + F1, Meta key, and clicking the icon in the bottom panel don’t do anything. To add to that, I can also no longer open the menus to add widgets or show alternatives. Applications that I had previously pinned to the taskbar still open and work, and all icons within the system tray still work, except for “Manjaro Settings Manager,” which does nothing when clicked.
$ inxi --admin --verbosity=7 --filter --no-host --width
System:
Kernel: 5.11.14-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.11-x86_64
root=UUID=628f24a1-5443-4159-99a5-4a1e4dfaa518 rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma 5.21.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 81HE v: Lenovo Legion Y740-15ICHg
serial: <filter> Chassis: type: 10 v: Lenovo Legion Y740-15ICHg
serial: <filter>
Mobo: LENOVO model: LNVNB161216 v: SDK0R32862 WIN serial: <filter>
UEFI: LENOVO v: AVCN22WW(V1.12) date: 07/20/2020
Battery:
ID-1: BAT1 charge: 54.1 Wh (100.0%) condition: 54.1/57.0 Wh (94.9%)
volts: 13.0 min: 11.5 model: SMP L17M3PG2 type: Li-ion serial: <filter>
status: Full cycles: 14
ID-2: hidpp_battery_0 charge: N/A condition: N/A volts: 4.1 min: N/A
model: Logitech G903 Wired/Wireless Gaming Mouse type: N/A serial: <filter>
status: Discharging
Memory:
RAM: total: 15.55 GiB used: 3.2 GiB (20.6%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 6-Core model: Intel Core i7-8750H bits: 64 type: MT MCP
arch: Kaby Lake note: check family: 6 model-id: 9E (158) stepping: A (10)
microcode: DE cache: L2: 9 MiB bogomips: 52815
Speed: 800 MHz min/max: 800/4100 MHz Core speeds (MHz): 1: 800 2: 4001
3: 3984 4: 1231 5: 4084 6: 4001 7: 3957 8: 2874 9: 2203 10: 2233 11: 1575
12: 800
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA TU106BM [GeForce RTX 2060 Mobile] vendor: Lenovo
driver: nvidia v: 460.67 alternate: nouveau,nvidia_drm bus-ID: 01:00.0
chip-ID: 10de:1f51 class-ID: 0300
Device-2: Chicony Integrated Camera (1280x720@30) type: USB driver: uvcvideo
bus-ID: 1-7:5 chip-ID: 04f2:b604 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver:
loaded: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 143 s-size: 341x191mm (13.4x7.5")
s-diag: 391mm (15.4")
Monitor-1: DP-4 res: 1920x1080 hz: 144 dpi: 142 size: 344x194mm (13.5x7.6")
diag: 395mm (15.5")
OpenGL: renderer: GeForce RTX 2060/PCIe/SSE2 v: 4.6.0 NVIDIA 460.67
direct render: Yes
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Lenovo driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci bus-ID: 00:1f.3
chip-ID: 8086:a348 class-ID: 0403
Device-2: NVIDIA TU106 High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus-ID: 01:00.1 chip-ID: 10de:10f9
class-ID: 0403
Sound Server-1: ALSA v: k5.11.14-1-MANJARO running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: yes
Sound Server-4: PipeWire v: 0.3.25 running: yes
Network:
Device-1: Intel Wireless-AC 9560 [Jefferson Peak]
vendor: Rivet Networks Killer driver: iwlwifi v: kernel bus-ID: 00:14.3
chip-ID: 8086:a370 class-ID: 0280
IF: wlp0s20f3 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel port: 3000 bus-ID: 3f:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp63s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB
driver: btusb v: 0.8 bus-ID: 1-14:6 chip-ID: 8087:0aaa class-ID: e001
Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.38 TiB used: 814.74 GiB (57.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: PC SN720 SDAPNTW-512G-1101 size: 476.94 GiB block-size:
physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD
serial: <filter> rev: 10130001 temp: 44.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT1000MX500SSD1
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
rotation: SSD serial: <filter> rev: 033 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 204.8 GiB size: 200.59 GiB (97.94%)
used: 108.69 GiB (54.2%) fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: 628f24a1-5443-4159-99a5-4a1e4dfaa518
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%)
used: 29 MiB (11.3%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
label: SYSTEM_DRV uuid: D48E-60B3
ID-3: /mnt/6898E2AF98E27AC8 raw-size: 726.7 GiB size: 726.7 GiB (100.00%)
used: 533.33 GiB (73.4%) fs: ntfs dev: /dev/sda2 maj-min: 8:2 label: Data
uuid: 6898E2AF98E27AC8
ID-4: /mnt/8EC28FE8C28FD2BF raw-size: 475.69 GiB size: 475.69 GiB (100.00%)
used: 172.69 GiB (36.3%) fs: ntfs dev: /dev/nvme0n1p3 maj-min: 259:3
label: Windows-SSD uuid: 8EC28FE8C28FD2BF
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/nvme0n1p4 maj-min: 259:4 size: 1000 MiB fs: ntfs label: WINRE_DRV
uuid: D28E90838E9061B1
ID-3: /dev/sda1 maj-min: 8:1 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-2:2 info: Logitech USB Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
power: 98mA chip-ID: 046d:c539 class-ID: 0300
Device-2: 1-4:3 info: Integrated Express ITE Device(8910) type: Keyboard
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 048d:c936 class-ID: 0301
Device-3: 1-6:4
info: Integrated Express Corsair Gaming K95 RGB PLATINUM Keyboard
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s power: 100mA chip-ID: 048d:c935 class-ID: 0300
Device-4: 1-7:5 info: Chicony Integrated Camera (1280x720@30) type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
chip-ID: 04f2:b604 class-ID: 0e02 serial: <filter>
Device-5: 1-14:6 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP)
type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 8087:0aaa class-ID: e001
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 48.0 C mobo: N/A gpu: nvidia temp: 46 C
Fan Speeds (RPM): N/A
Info:
Processes: 286 Uptime: 17m wakeups: 3 Init: systemd v: 247 tool: systemctl
Compilers: gcc: 10.2.0 clang: 11.1.0 Packages: pacman: 1377 lib: 414
flatpak: 0 Shell: Bash v: 5.1.0 running-in: konsole inxi: 3.3.04
Where did I go wrong here? The updates were around 1 GB (as they probably included a bunch of non-system updates like Firefox, etc.), but I don’t know where to find a log of my recent updates, as I have already rebooted and the terminal is empty now.
Can I get my system working again or do I have to Timeshift back?