Ich habe ein älteres Notebook ( HP Pavilion G7, 4 GB ) und habe die Festplatte gegen eine SSD ( Kingston KC 600, 1 TB) ausgetauscht um dann Manjaro aufzuspielen.
Doch nun habe ich in den Starteinträgen auch das alte Windows 7 stehen.
Was natürlich nicht funktioniert, da die entsprechende HD entfernt wurde.
Diese Einträge sollen verschwinden.
Ich weiß nicht woher Grub diese Einträge nimmt.
Im Bios sind zwar Daten zum Windows 7 hinterlegt, da es ursprünglich installiert war, aber die kann ich ja nicht entfernen - oder etwa doch?
Ich sehe keine ESP aber eine GPT-partitionierte Platte, war das so gewollt? Wenn die Firmware UEFI kann und in BIOS-Mode installiert wurde, würde ich eine Neuinstallation in UEFI-Mode empfehlen.
Habe ich ausprobiert und es startet einwandfrei. Allerdings wird nun kein Grub mehr angezeigt.
Es wurde folgendes angezeigt :
sudo update-grub
GRUB-Konfigurationsdatei wird erstellt …
Thema gefunden: /usr/share/grub/themes/manjaro/theme.txt
Linux-Abbild gefunden: /boot/vmlinuz-6.6-x86_64
Initrd-Abbild gefunden: /boot/intel-ucode.img /boot/initramfs-6.6-x86_64.img
Found initrd fallback image: /boot/initramfs-6.6-x86_64-fallback.img
Linux-Abbild gefunden: /boot/vmlinuz-4.19-x86_64
Initrd-Abbild gefunden: /boot/intel-ucode.img /boot/initramfs-4.19-x86_64.img
Found initrd fallback image: /boot/initramfs-4.19-x86_64-fallback.img
Warnung: Zur Erkennung anderer bootfähiger Partitionen wird os-prober ausgeführt.
Dessen Ausgabe wird zur Erkennung bootfähiger Programmdateien und Erzeugen neuer Boot-Einträge verwendet.
Bootmenü-Eintrag für UEFI-Firmware-Einstellungen wird hinzugefügt …
Root filesystem isn't btrfs
If you think an error has occurred, please file a bug report at "https://github.com/Antynea/grub-btrfs"
Found memtest86+ image: /boot/memtest86+/memtest.bin
Found memtest86+ EFI image: /boot/memtest86+/memtest.efi
abgeschlossen
efibootmgr --help
Zeigt mir nur die Hilfeseite an. ( Was sicherlich auch deine Absicht war )
sudo modprobe efivarfs
Zeigt nichts an. Aber hier soll wohl nur ein Treiber geladen werden - wenn ich es richtig verstehe.
Danach :
sudo mount -t efivarfs efivarfs /sys/firmware/efi/efivars
mount: /sys/firmware/efi/efivars: mount(2)-Systemaufruf ist fehlgeschlagen: Die Operation wird nicht unterstützt.
dmesg(1) könnte nach einem fehlgeschlagenen mount-Systemaufruf
weitere Informationen liefern.
sudo dmesg
[ 0.000000] microcode: updated early: 0x25 -> 0x2f, date = 2019-02-17
[ 0.000000] Linux version 6.6.10-1-MANJARO (builduser@fv-az1496-324) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Fri Jan 5 17:38:36 UTC 2024
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64 root=UUID=9821c0e2-557f-4408-828d-082f3317f2b3 rw quiet splash apparmor=1 security=apparmor resume=UUID=1df6fa15-0113-4dfc-a59f-93d0cbd37869 udev.log_priority=3
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g7 Notebook PC /1672, BIOS F.66 01/24/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.765 MHz processor
[ 0.001150] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001154] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001164] last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
[ 0.001172] MTRR map: 10 entries (5 fixed + 5 variable; max 25), built from 10 variable MTRRs
[ 0.001175] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001939] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.014053] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[ 0.014550] RAMDISK: [mem 0x312d5000-0x34961fff]
[ 0.014557] ACPI: Early table checksum verification disabled
[ 0.014561] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.014567] ACPI: XSDT 0x000000009CFFE120 000084 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.014575] ACPI: FACP 0x000000009CFFC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.014582] ACPI: DSDT 0x000000009CFEC000 00C1FF (v01 HP 1672 00000000 MSFT 01000013)
[ 0.014587] ACPI: FACS 0x000000009CF6C000 000040
[ 0.014590] ACPI: FACS 0x000000009CF6C000 000040
[ 0.014594] ACPI: ASF! 0x000000009CFFD000 0000A5 (v32 HP 1672 00000001 MSFT 01000013)
[ 0.014598] ACPI: HPET 0x000000009CFFB000 000038 (v01 HP 1672 00000001 MSFT 01000013)
[ 0.014602] ACPI: APIC 0x000000009CFFA000 00008C (v02 HP 1672 00000001 MSFT 01000013)
[ 0.014606] ACPI: MCFG 0x000000009CFF9000 00003C (v01 HP 1672 00000001 MSFT 01000013)
[ 0.014610] ACPI: SLIC 0x000000009CFEB000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.014614] ACPI: SSDT 0x000000009CFEA000 000D52 (v01 HP 1672 00001000 MSFT 01000013)
[ 0.014618] ACPI: BOOT 0x000000009CFE8000 000028 (v01 HP 1672 00000001 MSFT 01000013)
[ 0.014622] ACPI: ASPT 0x000000009CFE5000 000034 (v07 HP 1672 00000001 MSFT 01000013)
[ 0.014626] ACPI: SSDT 0x000000009CFE4000 0007C2 (v01 HP 1672 00003000 INTL 20100121)
[ 0.014630] ACPI: SSDT 0x000000009CFE3000 000996 (v01 HP 1672 00003000 INTL 20100121)
[ 0.014634] ACPI: SSDT 0x000000009CFDD000 00219F (v01 HP 1672 00001000 INTL 20100121)
[ 0.014638] ACPI: Reserving FACP table memory at [mem 0x9cffc000-0x9cffc0f3]
[ 0.014639] ACPI: Reserving DSDT table memory at [mem 0x9cfec000-0x9cff81fe]
[ 0.014641] ACPI: Reserving FACS table memory at [mem 0x9cf6c000-0x9cf6c03f]
[ 0.014642] ACPI: Reserving FACS table memory at [mem 0x9cf6c000-0x9cf6c03f]
[ 0.014643] ACPI: Reserving ASF! table memory at [mem 0x9cffd000-0x9cffd0a4]
[ 0.014644] ACPI: Reserving HPET table memory at [mem 0x9cffb000-0x9cffb037]
[ 0.014645] ACPI: Reserving APIC table memory at [mem 0x9cffa000-0x9cffa08b]
[ 0.014646] ACPI: Reserving MCFG table memory at [mem 0x9cff9000-0x9cff903b]
[ 0.014648] ACPI: Reserving SLIC table memory at [mem 0x9cfeb000-0x9cfeb175]
[ 0.014649] ACPI: Reserving SSDT table memory at [mem 0x9cfea000-0x9cfead51]
[ 0.014650] ACPI: Reserving BOOT table memory at [mem 0x9cfe8000-0x9cfe8027]
[ 0.014651] ACPI: Reserving ASPT table memory at [mem 0x9cfe5000-0x9cfe5033]
[ 0.014652] ACPI: Reserving SSDT table memory at [mem 0x9cfe4000-0x9cfe47c1]
[ 0.014653] ACPI: Reserving SSDT table memory at [mem 0x9cfe3000-0x9cfe3995]
[ 0.014654] ACPI: Reserving SSDT table memory at [mem 0x9cfdd000-0x9cfdf19e]
[ 0.014716] No NUMA configuration found
[ 0.014717] Faking a node at [mem 0x0000000000000000-0x000000015fdfffff]
[ 0.014721] NODE_DATA(0) allocated [mem 0x15fdf8000-0x15fdfcfff]
[ 0.014749] Zone ranges:
[ 0.014750] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014752] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014754] Normal [mem 0x0000000100000000-0x000000015fdfffff]
[ 0.014756] Device empty
[ 0.014757] Movable zone start for each node
[ 0.014758] Early memory node ranges
[ 0.014759] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.014761] node 0: [mem 0x0000000000100000-0x000000009ce3efff]
[ 0.014763] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.014764] node 0: [mem 0x0000000100000000-0x000000015fdfffff]
[ 0.014766] Initmem setup node 0 [mem 0x0000000000001000-0x000000015fdfffff]
[ 0.014772] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014803] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.023240] On node 0, zone DMA32: 448 pages in unavailable ranges
[ 0.028773] On node 0, zone Normal: 12288 pages in unavailable ranges
[ 0.028789] On node 0, zone Normal: 512 pages in unavailable ranges
[ 0.028811] Reserving Intel graphics memory at [mem 0x9da00000-0x9f9fffff]
[ 0.029000] ACPI: PM-Timer IO Port: 0x408
[ 0.029020] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.029024] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.029026] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.029032] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.029033] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.029039] TSC deadline timer available
[ 0.029040] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.029059] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.029061] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.029063] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.029064] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.029065] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.029067] PM: hibernation: Registered nosave memory: [mem 0x9ce3f000-0x9cebefff]
[ 0.029068] PM: hibernation: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[ 0.029069] PM: hibernation: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.029071] PM: hibernation: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.029072] PM: hibernation: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.029073] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.029074] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.029075] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.029076] PM: hibernation: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.029077] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.029078] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.029079] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.029080] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.029081] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.029082] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.029083] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.029084] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.029085] PM: hibernation: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.029088] [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.029089] Booting paravirtualized kernel on bare hardware
[ 0.029092] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.036844] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.037369] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[ 0.037379] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[ 0.037383] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.037407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64 root=UUID=9821c0e2-557f-4408-828d-082f3317f2b3 rw quiet splash apparmor=1 security=apparmor resume=UUID=1df6fa15-0113-4dfc-a59f-93d0cbd37869 udev.log_priority=3
[ 0.037561] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64", will be passed to user space.
[ 0.038389] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.038841] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.039021] Fallback order for Node 0: 0
[ 0.039025] Built 1 zonelists, mobility grouping on. Total pages: 1018895
[ 0.039027] Policy zone: Normal
[ 0.039549] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.039556] software IO TLB: area num 8.
[ 0.086102] Memory: 3896508K/4140912K available (16384K kernel code, 2150K rwdata, 13148K rodata, 3424K init, 3784K bss, 244144K reserved, 0K cma-reserved)
[ 0.096566] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.096712] Kernel/User page tables isolation: enabled
[ 0.096815] ftrace: allocating 49011 entries in 192 pages
[ 0.106970] ftrace: allocated 192 pages with 2 groups
[ 0.107154] Dynamic Preempt: full
[ 0.107369] rcu: Preemptible hierarchical RCU implementation.
[ 0.107370] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.107371] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.107373] Trampoline variant of Tasks RCU enabled.
[ 0.107373] Rude variant of Tasks RCU enabled.
[ 0.107374] Tracing variant of Tasks RCU enabled.
[ 0.107375] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.107376] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.111723] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.111955] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.112098] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.112207] Console: colour dummy device 80x25
[ 0.112210] printk: console [tty0] enabled
[ 0.112731] ACPI: Core revision 20230628
[ 0.113049] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.113069] APIC: Switch to symmetric I/O mode setup
[ 0.113140] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.113606] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.129735] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113e3db7d9, max_idle_ns: 440795204567 ns
[ 0.129742] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.76 BogoMIPS (lpj=7649216)
[ 0.129763] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.129787] process: using mwait in idle threads
[ 0.129791] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.129793] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.129797] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.129800] Spectre V2 : Mitigation: Retpolines
[ 0.129801] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.129802] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.129803] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.129805] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.129807] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.129809] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.129812] MDS: Mitigation: Clear CPU buffers
[ 0.129813] MMIO Stale Data: Unknown: No mitigations
[ 0.129819] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.129820] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.129821] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.129823] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.129825] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.154274] Freeing SMP alternatives memory: 40K
[ 0.154281] pid_max: default: 32768 minimum: 301
[ 0.155185] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,apparmor,integrity
[ 0.155196] landlock: Up and running.
[ 0.155197] Yama: becoming mindful.
[ 0.155204] LSM support for eBPF active
[ 0.155227] AppArmor: AppArmor initialized
[ 0.155559] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.155567] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.159757] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.160044] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.160085] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.160109] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.160144] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.160168] ... version: 3
[ 0.160169] ... bit width: 48
[ 0.160170] ... generic registers: 4
[ 0.160171] ... value mask: 0000ffffffffffff
[ 0.160173] ... max period: 00007fffffffffff
[ 0.160174] ... fixed-purpose events: 3
[ 0.160175] ... event mask: 000000070000000f
[ 0.160362] signal: max sigframe size: 1776
[ 0.160386] Estimated ratio of average max frequency by base frequency (times 1024): 1202
[ 0.160427] rcu: Hierarchical SRCU implementation.
[ 0.160429] rcu: Max phase no-delay instances is 1000.
[ 0.161337] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.161501] smp: Bringing up secondary CPUs ...
[ 0.161683] smpboot: x86: Booting SMP configuration:
[ 0.161685] .... node #0, CPUs: #2 #1 #3
[ 0.173147] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.175078] smp: Brought up 1 node, 4 CPUs
[ 0.175078] smpboot: Max logical packages: 2
[ 0.175078] smpboot: Total of 4 processors activated (18365.04 BogoMIPS)
[ 0.177253] devtmpfs: initialized
[ 0.177253] x86/mm: Memory block size: 128MB
[ 0.179883] ACPI: PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.180116] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.180155] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.180889] pinctrl core: initialized pinctrl subsystem
[ 0.181113] PM: RTC time: 22:16:22, date: 2024-01-28
[ 0.183514] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.184133] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.184264] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.184392] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.185476] audit: initializing netlink subsys (disabled)
[ 0.185513] audit: type=2000 audit(1706480182.069:1): state=initialized audit_enabled=0 res=1
[ 0.185513] thermal_sys: Registered thermal governor 'fair_share'
[ 0.185513] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.185513] thermal_sys: Registered thermal governor 'step_wise'
[ 0.185513] thermal_sys: Registered thermal governor 'user_space'
[ 0.185513] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.185513] cpuidle: using governor ladder
[ 0.185513] cpuidle: using governor menu
[ 0.185513] Simple Boot Flag at 0x44 set to 0x1
[ 0.185513] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.185513] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.187503] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.187522] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry
[ 0.187560] PCI: Using configuration type 1 for base access
[ 0.187778] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.188130] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.188172] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.188172] mtrr: probably your BIOS does not setup all CPUs.
[ 0.188172] mtrr: corrected configuration.
[ 0.188172] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.188172] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.188172] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.190296] ACPI: Added _OSI(Module Device)
[ 0.190296] ACPI: Added _OSI(Processor Device)
[ 0.190296] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.190296] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.223681] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.226604] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.227655] ACPI: Dynamic OEM Table Load:
[ 0.227679] ACPI: SSDT 0xFFFF90C040A39000 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.230925] ACPI: Dynamic OEM Table Load:
[ 0.230944] ACPI: SSDT 0xFFFF90C0402E3000 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.232783] ACPI: Dynamic OEM Table Load:
[ 0.232799] ACPI: SSDT 0xFFFF90C04029B000 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.236020] ACPI: _OSC evaluated successfully for all CPUs
[ 0.236160] ACPI: EC: EC started
[ 0.236164] ACPI: EC: interrupt blocked
[ 0.242181] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.242192] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.242197] ACPI: Interpreter enabled
[ 0.242278] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.242282] ACPI: Using IOAPIC for interrupt routing
[ 0.244089] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.244095] PCI: Using E820 reservations for host bridge windows
[ 0.244731] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.262795] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.262818] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.262968] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.262976] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.262982] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.264722] PCI host bridge to bus 0000:00
[ 0.264730] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.264738] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.264744] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.264750] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.264756] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.264798] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.265011] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.265121] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.265417] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.265442] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.265460] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.265473] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.265511] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.266181] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.266229] pci 0000:00:16.0: reg 0x10: [mem 0xc3604000-0xc360400f 64bit]
[ 0.266391] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.266591] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.267863] pci 0000:00:1a.0: reg 0x10: [mem 0xc3609000-0xc36093ff]
[ 0.271727] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.272016] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.272063] pci 0000:00:1b.0: reg 0x10: [mem 0xc3600000-0xc3603fff 64bit]
[ 0.272256] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.272528] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.272745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.273019] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.273238] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.273530] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.273746] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.274028] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.275296] pci 0000:00:1d.0: reg 0x10: [mem 0xc3608000-0xc36083ff]
[ 0.279020] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.279284] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.279750] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.279787] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.279809] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.279829] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.279850] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.279871] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.279891] pci 0000:00:1f.2: reg 0x24: [mem 0xc3607000-0xc36077ff]
[ 0.280006] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.280246] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.280292] pci 0000:00:1f.3: reg 0x10: [mem 0xc3605000-0xc36050ff 64bit]
[ 0.280344] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 0.280898] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
[ 0.280937] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.280961] pci 0000:01:00.0: reg 0x18: [mem 0xc2600000-0xc261ffff 64bit]
[ 0.280977] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
[ 0.281002] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.281019] pci 0000:01:00.0: enabling Extended Tags
[ 0.281124] pci 0000:01:00.0: supports D1 D2
[ 0.281175] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:01.0 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link)
[ 0.281431] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.281441] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.281448] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff]
[ 0.281457] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.281636] pci 0000:02:00.0: [1814:5390] type 00 class 0x028000
[ 0.281703] pci 0000:02:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff]
[ 0.282372] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.282388] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
[ 0.282570] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.282614] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.282672] pci 0000:03:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.282709] pci 0000:03:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.282908] pci 0000:03:00.0: supports D1 D2
[ 0.282913] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.283308] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.283320] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.283338] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.283532] pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.283578] pci 0000:04:00.0: reg 0x10: [mem 0xc1500000-0xc1500fff]
[ 0.283852] pci 0000:04:00.0: supports D1 D2
[ 0.283856] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 0.284201] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.284211] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.284220] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff]
[ 0.284234] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.286071] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.286273] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[ 0.286478] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.286676] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[ 0.286869] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.286874] ACPI: PCI: Interrupt link LNKE disabled
[ 0.287065] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.287070] ACPI: PCI: Interrupt link LNKF disabled
[ 0.287265] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.287474] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.287479] ACPI: PCI: Interrupt link LNKH disabled
[ 0.287965] ACPI: EC: interrupt unblocked
[ 0.287970] ACPI: EC: event unblocked
[ 0.287975] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.287979] ACPI: EC: GPE=0x16
[ 0.287984] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.287991] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.288199] iommu: Default domain type: Translated
[ 0.288199] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.288199] SCSI subsystem initialized
[ 0.288199] libata version 3.00 loaded.
[ 0.288199] ACPI: bus type USB registered
[ 0.288199] usbcore: registered new interface driver usbfs
[ 0.288199] usbcore: registered new interface driver hub
[ 0.288199] usbcore: registered new device driver usb
[ 0.288199] pps_core: LinuxPPS API ver. 1 registered
[ 0.288199] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.288199] PTP clock support registered
[ 0.288199] EDAC MC: Ver: 3.0.0
[ 0.290495] NetLabel: Initializing
[ 0.290500] NetLabel: domain hash size = 128
[ 0.290504] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.290557] NetLabel: unlabeled traffic allowed by default
[ 0.290572] mctp: management component transport protocol core
[ 0.290575] NET: Registered PF_MCTP protocol family
[ 0.290595] PCI: Using ACPI for IRQ routing
[ 0.308242] PCI: pci_cache_line_size set to 64 bytes
[ 0.308377] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.308385] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
[ 0.308390] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.308394] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff]
[ 0.308450] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.308450] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.308450] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.308450] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.308450] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.308450] vgaarb: loaded
[ 0.313629] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.313660] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.315893] clocksource: Switched to clocksource tsc-early
[ 0.324060] VFS: Disk quotas dquot_6.6.0
[ 0.324178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.324681] AppArmor: AppArmor Filesystem Enabled
[ 0.324746] pnp: PnP ACPI init
[ 0.325599] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.325612] system 00:00: [io 0x1004-0x1013] has been reserved
[ 0.325618] system 00:00: [io 0xffff] has been reserved
[ 0.325623] system 00:00: [io 0xffff] has been reserved
[ 0.325628] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.325634] system 00:00: [io 0x0454-0x0457] has been reserved
[ 0.325639] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.325644] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.325658] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.325663] system 00:00: [io 0x0380-0x0387] has been reserved
[ 0.326537] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.326547] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.326554] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.326560] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.326566] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.326572] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.326578] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.326585] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.326590] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.326597] system 00:04: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.327333] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.327341] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.327411] pnp: PnP ACPI: found 6 devices
[ 0.337036] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.337673] NET: Registered PF_INET protocol family
[ 0.337880] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.342353] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.342431] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.342496] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.342846] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.343485] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.343879] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.344023] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.344072] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.344455] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.344478] NET: Registered PF_XDP protocol family
[ 0.344490] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.344527] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2620000-0xc263ffff pref]
[ 0.344537] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.344545] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.344554] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff]
[ 0.344561] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.344574] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.344585] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
[ 0.344604] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.344611] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.344627] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.344642] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.344648] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.344659] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff]
[ 0.344668] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.344684] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.344690] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.344695] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.344701] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.344706] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.344711] pci_bus 0000:01: resource 1 [mem 0xc2600000-0xc35fffff]
[ 0.344716] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.344722] pci_bus 0000:02: resource 1 [mem 0xc2500000-0xc25fffff]
[ 0.344727] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.344731] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.344736] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.344741] pci_bus 0000:04: resource 1 [mem 0xc1500000-0xc24fffff]
[ 0.344745] pci_bus 0000:04: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.363329] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7d0 took 17951 usecs
[ 0.380032] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7d0 took 16254 usecs
[ 0.380115] PCI: CLS 64 bytes, default 64
[ 0.380133] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.380137] software IO TLB: mapped [mem 0x0000000098e3f000-0x000000009ce3f000] (64MB)
[ 0.380269] Trying to unpack rootfs image as initramfs...
[ 0.388373] Initialise system trusted keyrings
[ 0.388419] Key type blacklist registered
[ 0.388656] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 0.388700] zbud: loaded
[ 0.391210] integrity: Platform Keyring initialized
[ 0.391262] integrity: Machine keyring initialized
[ 0.441656] Key type asymmetric registered
[ 0.441668] Asymmetric key parser 'x509' registered
[ 0.441753] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.442012] io scheduler mq-deadline registered
[ 0.442023] io scheduler kyber registered
[ 0.442240] io scheduler bfq registered
[ 0.445810] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.451144] ACPI: AC: AC Adapter [ACAD] (on-line)
[ 0.451322] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.451392] ACPI: button: Lid Switch [LID0]
[ 0.451485] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.451550] ACPI: button: Power Button [PWRB]
[ 0.451668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.451849] ACPI: button: Power Button [PWRF]
[ 0.458899] ACPI: thermal: [Firmware Bug]: Invalid critical threshold (0)
[ 0.462103] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.462113] ACPI: thermal: Thermal Zone [TZ01] (0 C)
[ 0.462710] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.471993] Non-volatile memory driver v1.3
[ 0.472005] Linux agpgart interface v0.103
[ 0.472081] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.472170] ACPI: bus type drm_connector registered
[ 0.472818] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.475019] fbcon: Deferring console take-over
[ 0.475033] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.477628] ahci 0000:00:1f.2: version 3.0
[ 0.489823] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 0.489843] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.501437] scsi host0: ahci
[ 0.502247] scsi host1: ahci
[ 0.502777] scsi host2: ahci
[ 0.503368] scsi host3: ahci
[ 0.503972] scsi host4: ahci
[ 0.504754] scsi host5: ahci
[ 0.504925] ata1: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607100 irq 25
[ 0.504933] ata2: DUMMY
[ 0.504936] ata3: DUMMY
[ 0.504938] ata4: DUMMY
[ 0.504942] ata5: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607300 irq 25
[ 0.504946] ata6: DUMMY
[ 0.505343] usbcore: registered new interface driver usbserial_generic
[ 0.505379] usbserial: USB Serial support registered for generic
[ 0.505911] rtc_cmos 00:01: RTC can wake from S4
[ 0.506283] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.506313] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.506348] ehci-pci 0000:00:1a.0: debug port 2
[ 0.506494] rtc_cmos 00:01: registered as rtc0
[ 0.506559] rtc_cmos 00:01: setting system clock to 2024-01-28T22:16:22 UTC (1706480182)
[ 0.506685] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.506905] intel_pstate: Intel P-state driver initializing
[ 0.509831] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.510176] hid: raw HID events driver (C) Jiri Kosina
[ 0.510413] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc3609000
[ 0.510473] drop_monitor: Initializing network drop monitor service
[ 0.523123] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.523399] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 0.523415] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.523426] usb usb1: Product: EHCI Host Controller
[ 0.523434] usb usb1: Manufacturer: Linux 6.6.10-1-MANJARO ehci_hcd
[ 0.523441] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.524041] hub 1-0:1.0: USB hub found
[ 0.524080] hub 1-0:1.0: 2 ports detected
[ 0.524689] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.524719] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.524753] ehci-pci 0000:00:1d.0: debug port 2
[ 0.528793] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc3608000
[ 0.534335] ACPI: battery: Slot [BAT0] (battery present)
[ 0.539778] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.539993] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 0.540007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.540016] usb usb2: Product: EHCI Host Controller
[ 0.540023] usb usb2: Manufacturer: Linux 6.6.10-1-MANJARO ehci_hcd
[ 0.540029] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.540614] hub 2-0:1.0: USB hub found
[ 0.540647] hub 2-0:1.0: 2 ports detected
[ 0.562829] Initializing XFRM netlink socket
[ 0.563633] NET: Registered PF_INET6 protocol family
[ 0.773142] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.789827] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.819819] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.821498] ata1.00: ATA-9: KINGSTON SKC600/1024G, W0814A0, max UDMA/133
[ 0.822429] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.823131] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.823772] ata5.00: ATAPI: hp BD ROM BC-5541H, 2.81, max UDMA/100
[ 0.826317] ata1.00: configured for UDMA/133
[ 0.837044] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC600/ 4A0 PQ: 0 ANSI: 5
[ 0.838783] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
[ 0.838851] sd 0:0:0:0: [sda] Write Protect is off
[ 0.838865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.838948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.839057] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 0.842206] sda: sda1 sda2 sda3 sda4
[ 0.842812] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.843767] ata5.00: configured for UDMA/100
[ 0.896891] scsi 4:0:0:0: CD-ROM hp BD ROM BC-5541H 2.81 PQ: 0 ANSI: 5
[ 0.920428] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.920447] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.921091] hub 1-1:1.0: USB hub found
[ 0.921293] hub 1-1:1.0: 6 ports detected
[ 0.937022] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.937041] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.937716] hub 2-1:1.0: USB hub found
[ 0.937881] hub 2-1:1.0: 6 ports detected
[ 1.201187] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 1.217808] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.303692] usb 1-1.1: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00
[ 1.303711] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.369998] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b249, bcdDevice=12.04
[ 1.370022] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.370034] usb 2-1.5: Product: HP Webcam-101
[ 1.370042] usb 2-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.370050] usb 2-1.5: SerialNumber: SN0001
[ 1.391169] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[ 1.391197] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[ 1.391260] clocksource: Switched to clocksource tsc
[ 2.768257] Freeing initrd memory: 55860K
[ 2.790703] Segment Routing with IPv6
[ 2.790715] RPL Segment Routing with IPv6
[ 2.790764] In-situ OAM (IOAM) with IPv6
[ 2.790856] NET: Registered PF_PACKET protocol family
[ 2.792274] microcode: Microcode Update Driver: v2.2.
[ 2.792294] IPI shorthand broadcast: enabled
[ 2.799040] sched_clock: Marking stable (2796673232, 1086967)->(2819676201, -21916002)
[ 2.799555] registered taskstats version 1
[ 2.800317] Loading compiled-in X.509 certificates
[ 2.813032] Loaded X.509 cert 'Build time autogenerated kernel key: f1405f75fd94c9f4ce0f81c9d9af43094e90009f'
[ 2.823598] zswap: loaded using pool zstd/zsmalloc
[ 2.831335] Key type .fscrypt registered
[ 2.831342] Key type fscrypt-provisioning registered
[ 2.831630] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.832882] PM: Magic number: 8:129:301
[ 2.832967] tty tty30: hash matches
[ 2.843095] RAS: Correctable Errors collector initialized.
[ 2.843309] clk: Disabling unused clocks
[ 2.851906] Freeing unused decrypted memory: 2028K
[ 2.853303] Freeing unused kernel image (initmem) memory: 3424K
[ 2.861224] Write protecting the kernel read-only data: 30720k
[ 2.862449] Freeing unused kernel image (rodata/data gap) memory: 1188K
[ 3.032124] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.032136] rodata_test: all tests were successful
[ 3.032140] x86/mm: Checking user space page tables
[ 3.195341] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.195393] Run /init as init process
[ 3.195398] with arguments:
[ 3.195402] /init
[ 3.195405] splash
[ 3.195408] with environment:
[ 3.195410] HOME=/
[ 3.195413] TERM=linux
[ 3.195416] BOOT_IMAGE=/boot/vmlinuz-6.6-x86_64
[ 3.716785] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 3.781556] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.802921] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.807784] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.902649] input: HID 1241:1122 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1241:1122.0001/input/input3
[ 3.911289] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:1a.0-1.1/input0
[ 3.914540] usbcore: registered new interface driver usbhid
[ 3.914553] usbhid: USB HID core driver
[ 4.020278] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.020296] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.061158] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.087821] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.592610] [drm] radeon kernel modesetting enabled.
[ 4.592664] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 4.593054] ATPX version 1, functions 0x00000001
[ 4.593414] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.594004] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1672 0x00).
[ 4.786542] ATOM BIOS: HP
[ 4.787047] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 4.787060] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 4.787079] [drm] Detected VRAM RAM=512M, BAR=256M
[ 4.787083] [drm] RAM width 64bits DDR
[ 4.787348] [drm] radeon: 512M of VRAM memory ready
[ 4.787358] [drm] radeon: 1024M of GTT memory ready.
[ 4.787381] [drm] Loading CAICOS Microcode
[ 4.789413] [drm] Internal thermal controller without fan control
[ 4.795533] [drm] radeon: dpm initialized
[ 4.801151] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.803361] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 4.816859] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 4.817043] radeon 0000:01:00.0: WB enabled
[ 4.817050] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 4.817057] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 4.817889] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
[ 4.818687] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 4.818882] radeon 0000:01:00.0: radeon: using MSI.
[ 4.818960] [drm] radeon: irq initialized.
[ 4.836127] [drm] ring test on 0 succeeded in 1 usecs
[ 4.836150] [drm] ring test on 3 succeeded in 8 usecs
[ 5.013727] [drm] ring test on 5 succeeded in 2 usecs
[ 5.013745] [drm] UVD initialized successfully.
[ 5.014264] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5.014404] [drm] ib test on ring 3 succeeded in 0 usecs
[ 5.684620] [drm] ib test on ring 5 succeeded
[ 5.685606] [drm] Radeon Display Connectors
[ 5.685611] [drm] Connector 0:
[ 5.685614] [drm] VGA-1
[ 5.685617] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 5.685624] [drm] Encoders:
[ 5.685626] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.698052] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[ 5.771125] radeon 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 5.898238] radeon 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 6.476311] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 6.523051] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 2
[ 6.525734] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.526504] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 6.527389] vga_switcheroo: enabled
[ 6.675483] fbcon: i915drmfb (fb0) is primary device
[ 6.675493] fbcon: Deferring console take-over
[ 6.675506] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 16.728335] fbcon: Taking over console
[ 16.740474] Console: switching to colour frame buffer device 200x56
[ 17.835262] [drm] amdgpu kernel modesetting enabled.
[ 17.835323] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 17.835696] amdgpu: ATPX version 1, functions 0x00000001
[ 17.836473] amdgpu: Virtual CRAT table created for CPU
[ 17.836538] amdgpu: Topology: Add CPU node
[ 18.392450] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 18.407288] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 18.407437] radeon 0000:01:00.0: WB enabled
[ 18.407445] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 18.407452] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 18.408262] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
[ 18.408586] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 18.408595] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 18.425034] [drm] ring test on 0 succeeded in 2 usecs
[ 18.425053] [drm] ring test on 3 succeeded in 8 usecs
[ 18.425058] debugfs: File 'radeon_ring_uvd' in directory '1' already present!
[ 18.602639] [drm] ring test on 5 succeeded in 2 usecs
[ 18.602656] [drm] UVD initialized successfully.
[ 18.602851] [drm] ib test on ring 0 succeeded in 0 usecs
[ 18.602995] [drm] ib test on ring 3 succeeded in 0 usecs
[ 19.257992] [drm] ib test on ring 5 succeeded
[ 19.447480] PM: Image not found (code -22)
[ 19.597787] EXT4-fs (sda4): mounted filesystem 9821c0e2-557f-4408-828d-082f3317f2b3 r/w with ordered data mode. Quota mode: none.
[ 19.770763] systemd[1]: systemd 255.2-2-manjaro running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 19.770771] systemd[1]: Detected architecture x86-64.
[ 19.773467] systemd[1]: Hostname set to <HP-G7Manjaro-Laptop>.
[ 20.321370] systemd[1]: bpf-lsm: LSM BPF program attached
[ 20.681034] systemd[1]: Queued start job for default target Graphical Interface.
[ 20.726286] systemd[1]: Created slice Slice /system/getty.
[ 20.726694] systemd[1]: Created slice Slice /system/modprobe.
[ 20.727033] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 20.727306] systemd[1]: Created slice User and Session Slice.
[ 20.727392] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 20.727625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 20.727652] systemd[1]: Expecting device /dev/disk/by-uuid/1df6fa15-0113-4dfc-a59f-93d0cbd37869...
[ 20.727663] systemd[1]: Expecting device /dev/disk/by-uuid/dbd44d10-5c7f-4ae6-8a87-97d5dd869ddb...
[ 20.727682] systemd[1]: Reached target Login Prompts.
[ 20.727700] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 20.727722] systemd[1]: Reached target Remote File Systems.
[ 20.727747] systemd[1]: Reached target Slice Units.
[ 20.727795] systemd[1]: Reached target Mounting snaps.
[ 20.727816] systemd[1]: Reached target Mounted snaps.
[ 20.727847] systemd[1]: Reached target Local Verity Protected Volumes.
[ 20.727948] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 20.728462] systemd[1]: Listening on LVM2 poll daemon socket.
[ 20.730134] systemd[1]: Listening on Process Core Dump Socket.
[ 20.730297] systemd[1]: Listening on Journal Socket (/dev/log).
[ 20.730447] systemd[1]: Listening on Journal Socket.
[ 20.730476] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.731783] systemd[1]: Listening on udev Control Socket.
[ 20.731916] systemd[1]: Listening on udev Kernel Socket.
[ 20.732049] systemd[1]: Listening on User Database Manager Socket.
[ 20.733466] systemd[1]: Mounting Huge Pages File System...
[ 20.734366] systemd[1]: Mounting POSIX Message Queue File System...
[ 20.735869] systemd[1]: Mounting Kernel Debug File System...
[ 20.739884] systemd[1]: Mounting Kernel Trace File System...
[ 20.743213] systemd[1]: Starting Load AppArmor profiles...
[ 20.746051] systemd[1]: Starting Create List of Static Device Nodes...
[ 20.750107] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 20.753223] systemd[1]: Starting Load Kernel Module configfs...
[ 20.757983] systemd[1]: Starting Load Kernel Module dm_mod...
[ 20.761589] systemd[1]: Starting Load Kernel Module drm...
[ 20.764840] systemd[1]: Starting Load Kernel Module fuse...
[ 20.771560] systemd[1]: Starting Load Kernel Module loop...
[ 20.771721] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 20.776332] systemd[1]: Starting Journal Service...
[ 20.789870] systemd[1]: Starting Load Kernel Modules...
[ 20.789910] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.791514] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 20.791602] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.801416] systemd[1]: Starting Coldplug All udev Devices...
[ 20.805365] systemd[1]: Starting Virtual Console Setup...
[ 20.808368] device-mapper: uevent: version 1.0.3
[ 20.808539] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 20.813717] fuse: init (API version 7.39)
[ 20.814437] loop: module loaded
[ 20.819417] systemd[1]: Mounted Huge Pages File System.
[ 20.824750] systemd[1]: Mounted POSIX Message Queue File System.
[ 20.825026] systemd[1]: Mounted Kernel Debug File System.
[ 20.825236] systemd[1]: Mounted Kernel Trace File System.
[ 20.831384] systemd-journald[223]: Collecting audit messages is disabled.
[ 20.852429] vboxdrv: loading out-of-tree module taints kernel.
[ 20.852440] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 20.854484] EXT4-fs (sda4): re-mounted 9821c0e2-557f-4408-828d-082f3317f2b3 r/w. Quota mode: none.
[ 20.854914] systemd[1]: Finished Create List of Static Device Nodes.
[ 20.856526] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 20.887197] vboxdrv: Found 4 processor cores/threads
[ 20.891669] systemd[1]: Finished Load Kernel Module configfs.
[ 20.892334] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 20.914717] vboxdrv: TSC mode is Invariant, tentative frequency 2294785913 Hz
[ 20.914723] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004)
[ 20.924800] systemd[1]: Finished Load Kernel Module dm_mod.
[ 20.925462] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 20.934610] VBoxNetAdp: Successfully started.
[ 20.940914] VBoxNetFlt: Successfully started.
[ 20.948393] systemd[1]: Finished Load Kernel Module drm.
[ 20.949029] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 20.970046] audit: type=1400 audit(1706480202.958:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=236 comm="apparmor_parser"
[ 20.970642] audit: type=1400 audit(1706480202.958:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=238 comm="apparmor_parser"
[ 20.971531] systemd[1]: Finished Load Kernel Module fuse.
[ 20.972182] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 20.998154] systemd[1]: Finished Load Kernel Module loop.
[ 20.998429] systemd[1]: Started Journal Service.
[ 21.012618] audit: type=1400 audit(1706480203.001:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=239 comm="apparmor_parser"
[ 21.012627] audit: type=1400 audit(1706480203.001:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=239 comm="apparmor_parser"
[ 21.054445] audit: type=1400 audit(1706480203.041:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=237 comm="apparmor_parser"
[ 21.055036] audit: type=1400 audit(1706480203.044:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=237 comm="apparmor_parser"
[ 21.120600] audit: type=1400 audit(1706480203.108:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="php-fpm" pid=245 comm="apparmor_parser"
[ 21.129951] audit: type=1400 audit(1706480203.118:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-dcerpcd" pid=247 comm="apparmor_parser"
[ 21.168769] systemd-journald[223]: Received client request to flush runtime journal.
[ 21.193888] systemd-journald[223]: /var/log/journal/ab9df9d514024f818623fda6b3612cfa/system.journal: Journal file uses a different sequence number ID, rotating.
[ 21.193898] systemd-journald[223]: Rotating system journal.
[ 21.235754] audit: type=1400 audit(1706480203.224:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd-spoolss" pid=267 comm="apparmor_parser"
[ 21.257911] audit: type=1400 audit(1706480203.248:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd" pid=248 comm="apparmor_parser"
[ 21.324444] random: crng init done
[ 22.256363] Adding 9215996k swap on /dev/sda2. Priority:-2 extents:1 across:9215996k SS
[ 22.439542] input: Wireless hotkeys as /devices/virtual/input/input7
[ 22.475511] EXT4-fs (sda1): mounted filesystem dbd44d10-5c7f-4ae6-8a87-97d5dd869ddb r/w with ordered data mode. Quota mode: none.
[ 22.657380] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20230628/utaddress-204)
[ 22.657393] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 22.657398] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20230628/utaddress-204)
[ 22.657404] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.GPIO) (20230628/utaddress-204)
[ 22.657410] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
[ 22.657416] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.WMID.GPIO) (20230628/utaddress-204)
[ 22.657422] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20230628/utaddress-204)
[ 22.657428] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 22.657430] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20230628/utaddress-204)
[ 22.657436] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.GPIO) (20230628/utaddress-204)
[ 22.657441] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
[ 22.657447] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.WMID.GPIO) (20230628/utaddress-204)
[ 22.657452] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20230628/utaddress-204)
[ 22.657458] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 22.657459] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20230628/utaddress-204)
[ 22.657465] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.GPIO) (20230628/utaddress-204)
[ 22.657471] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
[ 22.657477] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.WMID.GPIO) (20230628/utaddress-204)
[ 22.657482] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.GPIO) (20230628/utaddress-204)
[ 22.657488] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 22.657489] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 22.667397] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 22.674612] i2c i2c-15: 1/2 memory slots populated (from DMI)
[ 22.682666] i2c i2c-15: Successfully instantiated SPD at 0x50
[ 22.747402] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 22.872235] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 22.872603] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 22.888678] r8169 0000:03:00.0 eth0: RTL8105e, 2c:27:d7:d9:cd:5c, XID 40a, IRQ 30
[ 22.931160] r8169 0000:03:00.0 eno1: renamed from eth0
[ 22.961227] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 22.961236] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 22.961239] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 22.961241] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 22.963382] iTCO_vendor_support: vendor-support=0
[ 22.970415] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 22.971957] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 22.972324] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 22.983143] at24 15-0050: supply vcc not found, using dummy regulator
[ 22.990071] mousedev: PS/2 mouse device common for all mice
[ 22.990139] cryptd: max_cpu_qlen set to 1000
[ 22.991035] at24 15-0050: 256 byte spd EEPROM, read-only
[ 23.014076] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 23.014235] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 23.014381] AVX version of gcm_enc/dec engaged.
[ 23.014416] AES CTR mode by8 optimization enabled
[ 23.053186] mc: Linux media interface: v0.10
[ 23.179534] videodev: Linux video capture interface: v2.00
[ 23.208585] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 23.248456] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 23.248752] usb 2-1.5: Found UVC 1.00 device HP Webcam-101 (04f2:b249)
[ 23.253907] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[ 23.254058] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 23.263126] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 23.263133] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.263136] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 23.263138] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 23.263139] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 23.263140] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 23.263142] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 23.264784] rt2800pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 23.278716] intel_rapl_common: Found RAPL domain package
[ 23.278723] intel_rapl_common: Found RAPL domain core
[ 23.278725] intel_rapl_common: Found RAPL domain uncore
[ 23.278735] intel_rapl_common: package-0:package:long_term locked by BIOS
[ 23.278738] intel_rapl_common: package-0:package:short_term locked by BIOS
[ 23.278741] intel_rapl_common: package-0:core:long_term locked by BIOS
[ 23.278744] intel_rapl_common: package-0:uncore:long_term locked by BIOS
[ 23.282873] usbcore: registered new interface driver uvcvideo
[ 23.323551] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 23.323628] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 23.323695] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 23.527982] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4828]
[ 23.609073] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1678, fw id: 706628
[ 23.664384] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 23.717165] loop0: detected capacity change from 0 to 8
[ 23.730450] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 23.784551] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 23.789680] NET: Registered PF_QIPCRTR protocol family
[ 24.074486] r8169 0000:03:00.0 eno1: Link is Down
[ 24.081266] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[ 24.081926] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[ 25.690923] wlp2s0: authenticate with dc:39:6f:19:8f:d2
[ 25.695550] wlp2s0: send auth to dc:39:6f:19:8f:d2 (try 1/3)
[ 25.698958] wlp2s0: authenticated
[ 25.701163] wlp2s0: associate with dc:39:6f:19:8f:d2 (try 1/3)
[ 25.706692] wlp2s0: RX AssocResp from dc:39:6f:19:8f:d2 (capab=0x1431 status=0 aid=4)
[ 25.706922] wlp2s0: associated
[ 25.771267] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by dc:39:6f:19:8f:d2
[ 27.608331] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[ 27.608365] radeon 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 36.872366] systemd-journald[223]: /var/log/journal/ab9df9d514024f818623fda6b3612cfa/user-1001.journal: Journal file uses a different sequence number ID, rotating.
[ 37.823211] xfwm4[820]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 38.779228] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 38.794176] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 38.794327] radeon 0000:01:00.0: WB enabled
[ 38.794335] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 38.794343] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 38.795170] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
[ 38.795503] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 38.795511] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 38.811948] [drm] ring test on 0 succeeded in 2 usecs
[ 38.811966] [drm] ring test on 3 succeeded in 7 usecs
[ 38.811971] debugfs: File 'radeon_ring_uvd' in directory '1' already present!
[ 38.989394] [drm] ring test on 5 succeeded in 2 usecs
[ 38.989404] [drm] UVD initialized successfully.
[ 38.989543] [drm] ib test on ring 0 succeeded in 0 usecs
[ 38.989682] [drm] ib test on ring 3 succeeded in 0 usecs
[ 39.658024] [drm] ib test on ring 5 succeeded
[ 61.975689] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 61.990893] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 61.991044] radeon 0000:01:00.0: WB enabled
[ 61.991053] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 61.991061] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 61.991856] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
[ 61.992177] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 61.992186] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 62.008673] [drm] ring test on 0 succeeded in 2 usecs
[ 62.008695] [drm] ring test on 3 succeeded in 8 usecs
[ 62.008701] debugfs: File 'radeon_ring_uvd' in directory '1' already present!
[ 62.186173] [drm] ring test on 5 succeeded in 2 usecs
[ 62.186184] [drm] UVD initialized successfully.
[ 62.186323] [drm] ib test on ring 0 succeeded in 0 usecs
[ 62.186453] [drm] ib test on ring 3 succeeded in 0 usecs
[ 62.839201] [drm] ib test on ring 5 succeeded
[ 86.661486] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 86.676460] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 86.676608] radeon 0000:01:00.0: WB enabled
[ 86.676616] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 86.676623] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 86.677443] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
[ 86.677771] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 86.677784] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 86.694210] [drm] ring test on 0 succeeded in 2 usecs
[ 86.694229] [drm] ring test on 3 succeeded in 8 usecs
[ 86.694236] debugfs: File 'radeon_ring_uvd' in directory '1' already present!
[ 86.871682] [drm] ring test on 5 succeeded in 2 usecs
[ 86.871695] [drm] UVD initialized successfully.
[ 86.871831] [drm] ib test on ring 0 succeeded in 0 usecs
[ 86.871957] [drm] ib test on ring 3 succeeded in 0 usecs
[ 87.543819] [drm] ib test on ring 5 succeeded
sudo ls /sys/firmware/efi
ls: Zugriff auf '/sys/firmware/efi' nicht möglich: Datei oder Verzeichnis nicht gefunden
Ich weiß nicht was hier schief gelaufen ist aber es scheint nicht alles so zu sein wie es sein sollte.
Wie bekomme ich es so hin das der Grub wieder angezeigt wird?
)