Since today, after I login, the screen displays only the desktop and the status bar. It seemingly doesn’t react to most of my inputs. When I use the shortcut $mod+d, the dmenu opens, but whatever I type is not displayed.
When I open two or more windows using dmenu or $mod+Return (launch terminal), their titles appear on the top of the screen. Then, when I change the stacking mode ($mod+w, $mod+e, $mod+s) or close a window ($mod+Shift+q), I can see that the system responds to my inputs as it supposed to but the changes are not displayed until I use one of the above shortcuts.
inxi -zv8
System:
Kernel: 6.1.174-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 16.1.1 clocksource: tsc
avail: hpet,acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
root=UUID=ccbe7454-2b45-4a06-88d9-9e92253f9bd9 rw apparmor=1 security=apparmor
resume=UUID=e20b6835-1d13-4165-a1c9-1e2565e4cfc4 udev.log_priority=3
Console: tty 2 DM: LightDM v: 1.32.0 Distro: Manjaro base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X513IA_D513IA v: 1.0
serial: <superuser required>
Mobo: ASUSTeK model: X513IA v: 1.0 serial: <superuser required> uuid: <superuser required>
Firmware: UEFI vendor: American Megatrends v: X513IA.306 date: 05/26/2021
Battery:
ID-1: BAT0 charge: 29.7 Wh (100%) condition: 29.7/42.1 Wh (70.7%) volts: 11.85 min: 11.85
model: ASUSTeK ASUS Battery type: Li-ion serial: N/A charging: status: not charging control:
start: N/A end: 100% cycles: 69
Memory:
System RAM: total: 36 GiB available: 34.67 GiB used: 3.23 GiB (9.3%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 64 GiB note: est. slots: 2 modules: 2 EC: None max-module-size: 32 GiB
note: est.
Device-1: Channel-A DIMM 0 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 4 GiB speed: spec: 3200 MT/s actual: 2667 MT/s volts: note: check curr: 1 min: 1 max: 1
width (bits): data: 64 total: 64 manufacturer: Micron Technology part-no: 4ATF51264HZ-3G2J1
serial: N/A
Device-2: Channel-B DIMM 0 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 32 GiB speed: 2667 MT/s volts: note: check curr: 1 min: 1 max: 1 width (bits): data: 64
total: 64 manufacturer: G.Skill part-no: F4-2666C19-32GRS serial: N/A
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 7 4700U with Radeon Graphics bits: 64 type: MCP arch: Zen 2 gen: 2
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23)
model-id: 0x60 (96) stepping: 1 microcode: 0x860010D
Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 smt: <unsupported> cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 8 MiB desc: 2x4 MiB
Speed (MHz): avg: 1397 min/max: 1400/2000 boost: enabled scaling: driver: acpi-cpufreq
governor: schedutil cores: 1: 1397 2: 1397 3: 1397 4: 1397 5: 1397 6: 1397 7: 1397 8: 1397
bogomips: 31959
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3
cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc
cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb
ibpb_exit_to_user ibrs ibs irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor
movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat
pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca
smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext
tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_rstack_overflow mitigation: SMT disabled
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP: disabled; RSB filling;
PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsa status: Not affected
Type: tsx_async_abort status: Not affected
Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Renoir [Radeon Vega Series / Radeon Mobile Series]
vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20
pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0
chip-ID: 1002:1636 class-ID: 0300 temp: 42.0 C
Device-2: IMC Networks USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3:3 chip-ID: 13d3:56a8 class-ID: 0e02
serial: <filter>
Display: x11 server: X.org v: 1.21.1.22 compositor: Picom v: 13 driver: X: loaded: amdgpu
unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu tty: 240x67
Monitor-1: eDP-1 model: ChiMei InnoLux 0x15e7 built: 2016 res: 1920x1080 dpi: 142 gamma: 1.2
chroma: red: x: 0.592 y: 0.349 green: x: 0.329 y: 0.557 blue: x: 0.153 y: 0.118 white: x: 0.314
y: 0.329 size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9 modes: 1920x1080,
1680x1050, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 640x480
API: EGL v: 1.5 platforms: device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: swrast
inactive: wayland,x11,device-0
API: OpenGL v: 4.6 vendor: mesa v: 26.1.1-arch1.2 note: console (EGL sourced)
renderer: llvmpipe (LLVM 22.1.5 256 bits)
Info: Tools: api: eglinfo,glxinfo de: xfce4-display-settings x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Renoir/Cezanne HDMI/DP Audio driver: snd_hda_intel
v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:1637
class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Ryzen HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3
class-ID: 0403
API: ALSA v: k6.1.174-1-MANJARO status: kernel-api with: aoss type: oss-emulator
tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: JACK v: 1.9.22 status: off tools: N/A
Server-3: PipeWire v: 1.6.5 status: off tools: pw-cli
Server-4: PulseAudio v: 17.0-98-gb096 status: active with: pulseaudio-alsa type: plugin
tools: pacat,pactl
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 01:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp1s0 state: down mac: <filter>
Device-2: Realtek USB 10/100/1G/2.5G LAN driver: r8152 type: USB rev: 3.2 speed: 5 Gb/s
lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-1:2 chip-ID: 0bda:8156 class-ID: 0000 serial: <filter>
IF: enp3s0f3u1 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Info: services: mld, NetworkManager, sshd, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1
mode: 1.1 bus-ID: 3-2:2 chip-ID: 8087:0029 class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2 lmp-v: 11 status:
discoverable: no pairing: no class-ID: 10c
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 931.51 GiB used: 637.67 GiB (68.5%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Crucial model: CT1000P2SSD8 size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: P2CR033 temp: 31.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 100 GiB size: 97.87 GiB (97.87%) used: 73.2 GiB (74.8%) fs: ext4
dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A uuid: ccbe7454-2b45-4a06-88d9-9e92253f9bd9
ID-2: /boot/efi raw-size: 500 MiB size: 499 MiB (99.80%) used: 288 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1 label: NO_LABEL uuid: F629-E408
ID-3: /home raw-size: 827.12 GiB size: 813.06 GiB (98.30%) used: 564.47 GiB (69.4%) fs: ext4
dev: /dev/nvme0n1p4 maj-min: 259:4 label: N/A uuid: ee81e396-3304-4130-bbaa-5740ae93b9cb
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes compressor: zstd
max-pool: 20%
ID-1: swap-1 type: partition size: 3.91 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A uuid: e20b6835-1d13-4165-a1c9-1e2565e4cfc4
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-3:2 info: Logitech USB Keyboard type: keyboard,HID driver: hid-generic,usbhid
interfaces: 2 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 90mA
chip-ID: 046d:c34b class-ID: 0300
Device-2: 1-4:3 info: Logitech M500s Optical Mouse type: mouse,HID driver: hid-generic,usbhid
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 300mA
chip-ID: 046d:c093 class-ID: 0300 serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1
mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900
Device-1: 2-1:2 info: Realtek USB 10/100/1G/2.5G LAN type: Network driver: r8152 interfaces: 1
rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 256mA chip-ID: 0bda:8156
class-ID: 0000 serial: <filter>
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-2:2 info: Intel AX200 Bluetooth type: bluetooth driver: btusb interfaces: 2
rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 8087:0029
class-ID: e001
Device-2: 3-3:3 info: IMC Networks USB2.0 HD UVC WebCam type: video driver: uvcvideo
interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 13d3:56a8 class-ID: 0e02 serial: <filter>
Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1
mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 75.0 C mobo: N/A gpu: amdgpu temp: 42.0 C
Fan Speeds (rpm): cpu: 0
Repos:
Packages: pm: dpkg pkgs: 0 pm: pacman pkgs: 2063 libs: 523 tools: pamac,yay
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://ftp.free.org/mirrors/repo.manjaro.org/repos/stable/$repo/$arch
2: https://mirror.vinehost.net/manjaro/stable/$repo/$arch
3: https://ct.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
4: https://volico.mm.fcix.net/manjaro/stable/$repo/$arch
5: https://manjaro.repo.cure.edu.uy/stable/$repo/$arch
6: https://manjaro.c3sl.ufpr.br/stable/$repo/$arch
7: https://mirror.kamtv.ru/manjaro/stable/$repo/$arch
8: https://mirrors.ocf.berkeley.edu/manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 280
1: cpu: 28.9% command: picom pid: 1824 mem: 201.2 MiB (0.5%)
2: cpu: 12.1% command: kitty pid: 2335 mem: 255.3 MiB (0.7%)
3: cpu: 2.9% command: steam pid: 4970 mem: 298.0 MiB (0.8%)
4: cpu: 1.7% command: Xorg pid: 1093 mem: 173.8 MiB (0.4%)
5: cpu: 1.2% command: ./steamwebhelper pid: 5509 mem: 647.5 MiB (1.8%)
Memory top: 5 of 280
1: mem: 647.5 MiB (1.8%) command: ./steamwebhelper pid: 5509 cpu: 1.2%
2: mem: 513.0 MiB (1.4%) command: steamwebhelper pid: 5601 cpu: 1.2%
3: mem: 298.0 MiB (0.8%) command: steam pid: 4970 cpu: 2.9%
4: mem: 255.3 MiB (0.7%) command: kitty pid: 2335 cpu: 12.1%
5: mem: 242.8 MiB (0.6%) command: kitty pid: 7284 cpu: 1.2%
Info:
Processes: 280 Power: uptime: 41m states: freeze,mem,disk suspend: deep avail: s2idle wakeups: 0
hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 13.82 GiB
services: upowerd,xfce4-power-manager Init: systemd v: 260 default: graphical tool: systemctl
Compilers: clang: 22.1.5 gcc: 16.1.1 Shell: Zsh (login) v: 5.9 running-in: tty 2 inxi: 3.3.40
I’m not sure which program might be at fault here. i3 log doesn’t show anything unusual. I didn’t include it because it’s extremely large.